More than 3 AR for one Sales Order in relationship map

Hello,
i would need some advice on the following: If you have more than 3 Invoice for one Sales order these are not shown seperately in the relationship map. SAP could reproduce the issue and refers to it as normal system procedure at the moment. They adviced me to post a thread here.Is there any way you could make the invoices be seen one by one.
SAP Version 8.81 PL 5
Thanks a lot for any advices on this topic
Vanessa
Edited by: Vanessa Schürer on Jan 16, 2012 2:45 PM

Welcome to the forum.
If you have any suggestions you post them on sap's new idea collaboration page. You do bring up a good point and hopefully in 8.82 it will be resolved as the relationship map was not originally on the road map. Hopefully they can develop this feature.

Similar Messages

  • Two billing for one sales order for same customer

    Dear All ,
    I have a requirement of posting a two billings for one sales order.
    One is for Sales and another is for commission...
    Entry could be
    Sales Entry - Db Customer
                        Cr  Sales
    Commission entry could be
    Db - Cusomter
    Cr- Sales commission income account (P/L)
    We are having third party sales scenario , In this case billing is MIRO dependent.
    Once the miro is done then only billing is possible ...
    Could you please advise on that ..
    Regards,
    Sukh

    Dear Ratish,
    Thanks for yr reply.
    I already did that but it is not serving business purpose.
    Comm payment  - comes diff time than sales payment.
    so ,I will post one entry customer will get hit with total amount Sales + commission
    like below
    Let say 10, 000 is the sales value and 500 is the commission
    So , This entry will get posted
    Customer Db- 10,500
    Sales Cr- 10,000
    Comm Income Cr- 500
    But, As I said sales amt will be paid before so We need to clear it partially and some time customer pays also diff amount due to some defect.
    So, We wont be knowing for which case we have or havnet received the payment against commission.
    As , Customer account is got hit with total amount( Sales+ Comm..value).
    Pls advise how to solve this.
    Regards,
    Sukh

  • Two deliveries required for one sales order

    Hello Friends,
    I have a quirey , I have two types of goods in one sales order, one is dangerous goods and other one is normal. How ever we are thinking to make two seperate deliveries even they are in one sales order. How can two diff deliveries gets created.
    We are planning to create new shipping point with new loading group for the dangerous goods .
    Will the above decision works or is there any simplest way to create two auto deliverys for one sales order.
    Reg.

    Hi all,
    I have yet another proposal - using copy control and adding there dangerous goods profile LIPS-PROFL as split criterial. This field is populated originally from material master MARA-PROFL field.  You can check for example routine FV50C201. Split criteria are defined in likp-zukrl field.
    I think that is better solution then introducing new shipping point. Because there are some determinations and dependencies related to shipping points. So the more shipping points you have, the more additional config you have. If it is needed by business to have separate shipping points - then fine. But if the goods are shipped from the same place, then I would rather modify copy control instead of multiplying config and master data. I say duplicated effort in master data - because with 2 shippiong points you would need to maintain DG profile field and additionally loading group.
    Kind regards
    Witek Prawecki.

  • Two  outbound Delivery for one sales order

    Hi Experts
    I am an Abaper and i have to find the root couse of this problem
    problem is  two outbound delivery getting generated for one sales order with same no of quantity
    Now i am unable to find the approch what can be root cause of this problem , I checked the details of these deliveries these are created by some job , but even in job history any positive solution comeout,
    please suggest me what are other ways or causes of this problem

    Hi there,
    Delivery split will be there is the header data in shipping is different.
    For eg of shipping points, delivery dates, ship-to etc are different.
    Apart from this in the copy control routines at the headerlevel from OR to LF in VTLA, there might be some customized code written to split the deliveries. Possible conditions could be items from different warehouses / storage locs or if the quantity is more, then a delivery split.
    Pls check if there is any customised code written in copy control routines in VOFM.
    Regards,
    Sivanand

  • Create ecatt script for one sales order creation with multiple line items

    Hi ,
    I want to create a ecatt script for one sales order creation with multiple line items. Preferably SAP GUI.
    This selection of data will be from an external file/ variants which will have only one row of data in it.
    Firstly: I have to sort the external file having same PO Numbers in an order.Group them together.
    Second: I have to create sales order for those many line items having same PO Number.
    Best Regard
    Taranum

    Hi Micky
    Firstl you should upload the Line items for a particular sales Order in an Internal table
    and then pass that internal table to your BAPI during your coding corresponding to a particu;lar sales order
    In case of any issues pls revert back
    Reward points if helpful
    Regards
    Hitesh

  • VL10C double delivery notes for one sales order

    Dear all,
    Currently we encountered an very strange issue in our SAP.  we found that via VL10C, SAP create two duplicated ourbound delivery notes for one sales order, which resulted in a double items and amount in the billing document. These two deliveries notes are complete the same, which were created with 7 sec interval via VL10C. Check in the sales order, we can see delivery Qty was double against order Qty for all the items.
    does anyone have a clue on this issue? your effort and feedback will be most applicated!
    Thanks & Best Regards,
    Kyo NG

    Hi,
    I forgot this possible cause. Check Note 61148 - VL04 VL02 AME807 AME815: Insert to table VETVG and related notes, specially Note 931297 - VL10x, VL10HU - Duplicate entries displayed in STO.
    Regards,
    Eduardo

  • How the system determines the Requirement type  for one sales order

    Hi,
    SAP-SD Gurus,
    Please tell me how the system determines the Requirement type  for one sales order?
    Thanks & Regards,
    Sreenivas.P

    Hi,
    System follows some search criterial to determine the requirement type
    1. First, an attempt is made to find a requirements type using the strategy group in the material master.
    2. If the strategy group has not been maintained, the system will determine it using the MRP group.
    3. If the MRP group has not been defined, the system uses the material type instead of the MRP group when accessing the corresponding control tables.
    4. If no requirements type is found here, the system assumes a special rule and attempts to find a requirements type with the aid of the item category and the MRP type.
    5. If this is not possible, a last attempt is made to find a requirements type with the item category only.
    6. If the last attempt fails, the system declares the transaction as not relevant for the availability check or transfer of requirements.
    Please check the path
    SPRO->SALES & DISTRIBUTIONS->BASIC FUNCTIONS>AVAILABILITY CHECK AND TOR->TRANSFER OF REQUIREMENTS--->DETERMINATION OF REQUIREMENT TYPE USING TRANSACTION.
    Hope it will clarify
    regards,
    santosh

  • Two invoices for one sales order

    I want to create two invoices for one sales order
    Scenario is like to create sales order for value of 100 $, and I want to send order reference billing after saving the sales order for 10% of order amount
    I would say 10% of 100 $
    And after delivery I want to issue a invoice for 90 %( rest of the amount) which is delivery relevant invoice.
    Both invoices will be relevant of accounting.
    Would any body suggest this, how it would be mapped it in to SAP.

    Hi Suresh,
    It is possible in Partial billing. Maintain the Billing plan and create a plan with the inputs as u specified.
    Go to IMG-SD-Billing-Billing plan.   Do ur own configuration for Billing plan.
    Now in Sales document creation mode....header details-Billing plan, U block the billing schedules and as per ur requirement , remove the billing block and create billing document.
    If u configured Account detrmination procedure, U wld get the accounting document wrt billing document.
    Hope this wld help U.
    Regards,
    Praveen

  • Create 2 different delivery types for one sales order

    Hi,
    When sales agent is placing sales order at customer site, customer declares as well products or returned packages he would like to return. our business need is to combine all items (return products,  return packages and ordered items) into one sales order.
    However, we would like to split the sales order into 2 different delivery types. Sales order customizing dictates only one default delivery type per order.
    We can set up split criteria via copy control according to item category, but how can we intervene during creation of deliveries and set up a rule to determine different delivery type then default for return items ?
    Thanks,
    Assaf tzur

    Dear Assaf,
    Through copy control settings you can create two delivery types for single sales order but you have to select the delivery type manually while creating delivery.
    If you want automatic process then you need go for some Zdevelopment with the help of ABAPer.
    I hope this will help you,
    Regard,
    Murali.

  • Multiple quotation for one sales order

    Hi all,
    My requirment is to create one sale order that reference from many quotations.  From what I try in CRM, when I want to create a follow-up document, I have to start from the quotation and choose create follow-up document then the sale order will be created. However, that's only good for one quotation one sale order. 
    What I want is to have a sale order that referenced from many quotations, is this possible in CRM?
    Thanks in advance for all the helps.

    Hi Gilbert,
    As u rightly said one quotation one sale order as a folow up.
    But u can make use of <b>Object Relationship Profile</b>, to be added in ur transaction type of sales order.
    So after creating a sales order in refernce to a quotation, u can add other quotation in the Relationship tab which gets added to the Transaction screen.
    This will also update the document flow.
    The object Relationship Profile can be added in trnasaction type as well as Item Category.
    Regards,
    Shalini Chauhan

  • Multiple delivery for one Sales Order?

    I have been searching for the subject in forum....i dint get any possible answers? So in never the case multiple delivery will be attached to sales order ???
    Thanks in advance for your valuable comments...
    Thanks
    Hari

    The same concept told earlier for shipments holds good here.
    We can have n number of deliveries for a single sales order.
    One of the example is Availiblity check.
    If all the items in an SO is NOT confirmed at once, multiple deliveries are to be made for that SO.
    So, Depending on the business case, we can have reasons, why an SO can have multiple deliveries.
    Rgds
    Sumanth.Gururaj
    Consultant/Systems Analyst - SAP SD/MM

  • Two Purchase Requisitions created on MRP for one Sales Order

    Hi,
    A Sales Order has been created with one schedule line and one delivery date. When MRP is run it creates 2 Purchase Requisitions. The material in the Sales Order is a Prepack Material and has a component attached in the BOM. Please advice as to why the order is splitting when MRP is run and also why 2 PR's are created.
    Thank you for your help.

    Please check in OVZG................assembly type........if u maintained .3 or 4. It may be the reason
    Dynamic assembly order ---SAP HELP DOCUMENT
    If you create a sales order for a material with the 'assembly processing' technique, the system carries out an availability check for the components needed for the assembly. Depending on the results of the availability check, either one or several procurement elements are created. The quantity for a one-time delivery and/or the next possible deadline for a full delivery and/or a delivery proposal with then ext possible deadline are displayed on the availabililty control screen.

  • Multiple purchase orders for one sales order: ME59

    Hi,
    I have issue with converting sales order into a purchase order.
    A standard third party sales order (type TAS) with multiple line items is being converted to a single purchase order.
    In case of a free of charge sales order (type FD) with multiple line items, each line item is being converted to an individual PO.
    The difference between TAS and FD is the item catecory and schedule line category.
    In both the above cases only one purchase requisition is being created per sales order. The issue is when this PR is being converted to a PO. (ME59 is used to convert the PR).
    Is there any setting/config which is driving the multiple PO creation based on either schedule line category or the account assignment category setup in the schedule line category?
    Please advice...
    Thanks,
    KSB

    Any ideas?

  • How to restrict more than one delivery from one sales order.

    Hi Guys,
    We have a requirement that is, system should not allow more than one delivery from one sales order no even if when there is some line item still to be delivered.
    We want only one delivery for one sales order and rest of line items should be treated as rejected.
    Kindly help
    Thanks in advance,
    Balu

    Hi MP,
    Its also not working as we have the requirement is that once sales order is saved and one delivery is created then again if we are adding some more item inthe same sales order then system should not allow to create delivery document as one delivery already created.
    Thanks,
    Balu.
    Edited by: Balu Sajja on Aug 30, 2010 1:29 PM

  • Delivery quantity greater than confirmed quantity in sales order

    Hi experts,
    Quantity in delivery order can be changed to more than the confirmed quantity in sales order when there is sufficient stock. (Setting "Check overdelivery" in 0VLP already maintained "B-Situation rejected with an error message").
    Anyway in system to check only "confirmed quantity" can be delivered?.
    Regards,
    Liang

    Thanks Ankur for your reply.
    The "Overdeliv. tolerance" in customer master allow customer to deliver more than the quantity in sales order.
    But my situation here is to control the deliver quantity base on confirmed quantity in sales order.
    For example, i have quantity 10 for an item in sales order, and i only confirm 5 to deliver. Let's say my stock has more than 15 quantity, during DO creation, system will proposed 5 but i can manually change quantity to 10.
    I would like to control only confirmed sales order can be delivered. Is this only can control using user exits?
    Best Regards,
    Liang

Maybe you are looking for