More Than One Hour Footage Audio Rendering Issue in Adobe Media Encoder (from AE)

Hi every one,
I'm having a render issue when I send an After Effects composition longer than 1 hour to Adobe Media Encoder for encoding H264 files. In this case, I'm trying to render an already rendered 70 min. 23,976 fps DPX sequence paired with a corresponding ".wav" audio file into the composition and the H264 file rendered by AME plays silent for the first 10 minutes and past those 10 "silent" minutes the audio comes back normally during the last 59 min and 59 sec exactly.
I've tryed every posible "solution" (changing the audio file from .wav to .aiff and .mp3) and assigning more ram to Adobe Media Encoder and it renders the same every single time.
Please Help!!!!
Oscar.

If you can't track down the audio problems some other way you have two options. Render to a production codec in AE then compress your production master in AME or tender only your subtitles (or use dynamic link) to a lossless with alpha format in AE and marry them to the original video and audio in PPro.
Actually, the first thing I would have tried when audio problems showed up would have been to render a production master using a visually lossless format like QuickTime JPEG 2000 and then compressed in the AME.

Similar Messages

  • I am trying to copy more or less 30G from my MacbookPro to an external hard drive and it is stuck in the "preparing to copy" step. But that for more than one hour. What should I do to make it faster? Thanks a lot in advance!

    I am trying to copy more or less 30G from my MacbookPro to an external hard drive and it is stuck in the "preparing to copy" step. But that for more than one hour. What should I do to make it faster? Thanks a lot in advance!

    Thanks Shootist007, by blockd files I mean files that I have changed to blocked and when I tried to move then for the first time, I had to unblock again. I am trying to backup my pictures, my songs and other files like word documents and excel tables. First I put all of them as blocked, what caused the first problems on trying to move them. Then, I've unchecked the block option and if I try to move one by one, there is no problem. The issue is to move all together, because it gets stuck in the preparing to copy files step. Anyway, if I cannot do all by once, I'll do it one by one, event though that was not suposed to happen if we are talking about technology, right? Anyway, I thank you again for trying to help me!

  • Report is executing more than one hour

    Hi All,
    I have an issue with my report,its taking more than one hour for execution.
    This report is called through an package,in package there are cursors which retrive data and sends to mail.The problem is with this select statement in cursor,its taking a lot of time to retrive the data.
    In my cursor select statement i am using the following tables
    HZ_PARTY_SITES HPS,
    HZ_CUST_ACCOUNTS CUST,
    HZ_CUST_ACCT_SITES_ALL HCASA,
    HZ_CUST_SITE_USES_ALL HCSUA,
    HZ_LOCATIONS HL,
    OE_ORDER_HEADERS_ALL OOH,
    OE_TRANSACTION_TYPES_TL OT,
    OE_AUDIT_ATTR_DESC_V AADV
    when i use OE_AUDIT_ATTR_DESC_V ,its taking a lot of time to retrive.So any one can help me out in this issue,how to add this view to other tables
    Regards,
    RR

    RR,
    Before you add any indexes to the listed tables, check with Oracle support to ensure you will be violating your Oracle Enterprise Business Suite agreement. Oracle has specific rules on modifying EMS tables. Additionally, any EBS patch or update that gets applied will likely drop any custom changes to these tables. It might be better for you to open a Service Request with Oracle Support and have them tell you how to improve the performance of your query since all of your tables are EBS tables.
    Craig...
    Message was edited by:
    CraigB
    RR, you may also want to check with your DBA(s) to see when the Statistics were last gathered on these tables.

  • How long does it take for the IOS 7.1 to finish updating? My phone has been plugged in to my computer for more than one hour and the status bar only shows about less than 1/4 completed. I have an iphone 5s btw.

    My phone has been plugged in to my computer for more than one hour and the status bar only shows about less than 1/4 completed. I have an iphone 5s btw.

    Depends on how strong your wifi connection is.
    you can try a reset hold down the home/sleep button together until you see the apple logo and then release.

  • G5 idle for more than one hour

    when i leave my G5 idle for more than one hour, when i enter my password, the system locks. i have to shut off the computer and turn it on again...

    Try restoring the iPod to factory settings/new iPod.
    If still problem then I would make an appointment at the Genius Bar of an Apple store and hear what they have to say.
    If a bad battery:
    Apple will replace it for $79
    A third-party place is less expensive. Here is one:
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace it yourself.
    iPod Touch Repair – iFixit

  • My iphone 4 does not turn on anymore and its been plugged in for more than one hour

    My iphone 4 will not turn on anymroe and is left on the screen where its charging with thunder bolt lightening. I tried holding the power button and home button but still no luck. its been plugged in the charger for more than one hour already.

    if you tried charging and the reset sounds like it needs to be repair/replaced

  • Having major issues with Adobe Media Encoder (AME) - exporting with weird image flickering/colour anomalies, crashing regularly, freezing during encode...!

    Hi Guys
    I am having some real issues with Adobe Media Encoder (AME) at the moment.  It appears that I am unable to encode an h.264 for Vimeo from a Premiere Pro Project file at the moment without at least some weird image issues that are not supposed to be there.  These include weird flickering, colour changes, artefacts etc.  This is if I am lucky...often I am unable to get the process to complete as the application either crashes and tells me there has been a problem or it simply freezes and I have to force quit the application and often restart my machine.
    The problem seems to not to just be with h.264 for the web encodes but also with BluRay h.264 as well. As yet I haven't seen if there is a problem with MPEG-2 for DVD so I will check this out too!
    Does anyone else see this happening or does anyone know what might be the problem?
    I thought the Premiere Pro project might have been corrupt so tried a different project but the same issues were happening here too.
    Any help would be really gratefully received.
    Cheers
    EDIT - I have just found this online which is exactly the problem I am having! Thanks a bloody bunch Apple! 10.9.3 causing headaches for Mac Pro users | MacIssues
    Message was edited by: Alex Cameron

    Agreed, I now have a project to GET OUT, and AME crashes consistently 1/3 into the render. It appears to halt all processing after (real time) 00:02:30
    Am seriously considering uninstalling CC as I am beginning to find other issues in some apps, and going back to CS6/MC just so I can get work out. Durn it Adobe this is AWFUL!!
    Alright, let's try to be constructive instead of throwing rocks... but the frustration level is high, and I have material on deadline. Let's get with this, guys...
    What OS Win7, 64-bit
    What version of AME/PPro (Please be specific by getting the full version number in the About Adobe Media Encoder screen) 8.2.0.54 Ppro: 8.2.0 (65)
    When is it crashing (Again, the more detail here about where it was in the encoding process the better) roughly 1/3 into the sequence, always on exactly the same frame - tried replacing the clip with something different to see if it was a timeline error, and NO EFFECT.
    What is your source (PPro project or media file (what kind?)) PPro
    If the source if a PPro project, does it work when exporting directly from PPro? NO
    What format are you exporting to? H.264, QT, WM, tried everything my client can play.
    Do other formats work? MPEG2, QuickTime, etc? NO
    Have you tried with GPU rendering on? How about turning it off by switching to Software-only mode? Mine doesn't have any choice, it's software-only.
    Have you tried disabling Native Sequence Loading? (AME Preferences: General > Enable Native Sequence Loading) No effect
    Other things I tried: uninstalling/reinstalling AME, setting cache to a fast local disk.

  • Sync and Create project operation from DTR is taking more than one hour

    Hi All.
    Recently basis team has implemented the track for  ESS/MSS application.So When we import the track to NWDS its showing 500 Dcs.
    I have successfully done the Sync and create project operation from DTR for 150 DCS and its take 5 min per Dcs.
    However after that when i am trying to sync Dc or create project DC from DTR the operation is taking more than 3 hour per DC.Which should not be the case because for rest 150 DC that i ahve done Sync operation adn Create project operation from DTR it hardly takes 5 min per Dc.As this operataion is taking so much time finally i have close the NWDS to stop this operation.
    I am using NWDS 2.0.15 and EP7.0 portal SP15 and NWDI is 7.0
    Can any body tell how to solve this issue so that i can Sync and Create project from DTR for a DC within 5 min?
    Thanks
    Susmita

    Hi Susmita,
    If the DCs are fine in CBS build, then I feel there is no need to test all of them locally in NWDS.
    You can verify some certain applications in these DCs, then you sync & create project for these DCs & test run these applications.
    As I get you only need to check ( no changes will be done ), yes you can verify them in small groups (say 20-25 DCs/group) in different workspaces so that no workspace is overloaded.
    But why do you want to keep a copy of them locally as you are not making any changes, you can Unsync & Remove these projects once verified & use the same workspace to work on the next set of DCs.
    Hope this clarifies your concerns.
    Kind Regards,
    Nitin
    Edited by: Nitin Jain on Apr 23, 2009 1:55 PM

  • More than one loop in audio file

    Please, allow more than one loop in a wave file. This functionality was present in the Adobe Audition 3.0, but it is gone now. The sampler tab is gone from the metadata. Please, bring it back. Even though, the user can set more than one region marker in the wave file, only one of them is internally set to be understood as a loop and there is no way how to set more loops in a wave file. Please add this functionality back into the Audition.

    Only one audio file can be used in a Lightroom slideshow.
    You'll have to combine multiple songs into a single audio file (e.g. using Audition) then use the single audio file in the Lightroom slideshow.
    For more flexibility, you can use commercial software such as ProShow Web, Gold or Producer which comes with a free Lightroom plugin
    ProShow Gold - Create Fast and Fun Photo Slideshows
    ProShow Web - Instant Photo and Video Slideshows from your Mac or PC
    Plug-ins for ProShow

  • When I add my composition to the Adobe Media Encoder from After Effects, it renders out incorrectly?

    Why is it that when I add my composition directly from after effects to the adobe media encoder, it renders out of the adobe media encoder incorrectly? By that I mean the video comes out a little scrambled- parts of it overlap other parts. Is this an issue with 'dynamic link'? Did I do something wrong? I'm working in CC.

    I also don't understand what you are saying. What do you mean by "parts of it overlap other parts"? A screen shot might help.
    What were your render settings in AME? (Format, Codec, data rate, etc.)
    What is in your AE comp? If footage, tell us what format, codec, etc. Tell us what effects were used too.
    What exact version number of AE CC are you using?

  • 30 Second Audio Render problem in Adobe Media Encoder?

    I've been trying a few things out to fix this, but no luck.
    Ok, so I export videos with a audio spectrums where audio would be necessary. Now I want to do this all in After Effects without editing the Audio in in Premiere Pro. After Effects does not render in H.264. So I send it Adobe Media Encoder. When I export to AME, the first 30 seconds is mute, without fail. only on AME though. I can export straight through AE with .mov and it works fine. but I don't like doing that with the large filesize. I also did this with WebM. Audio does not export for 30 seconds on AME.
    I like to send everything to AME. So if I have to go to premiere to fix audio I will. so after fixing everything I send it over to AME and let it export. for some reason, it WILL give me audio. Is there something wrong with my settings in AE or AME?
    Everything is CC if that helps any

    OK, give this a shot.
    FAQ: Why are some codecs and sequence presets missing from my installation of Premiere Pro?

  • Impossibility to burn a DVD of more than one hour

    My application consists to develop diaporamas of photos with imovie to take advantage of the potential of imovie compared to diaporamas using iphoto.
    I have 7 diaporamas of 10 to 15 minutes each for a total of 78 minutes
    A first step was to burn a subset of these diaporamas for my grand children, each of them of less than an hour ( 55 to 57 minutes ). That was done without any problem.
    A second step was to burn a DVD of all diaporamas. I switched from best performance to best quality. Information on the projest was:
    DVD capacity: 2,6Go
    Menu; 1 first level ( aquarium2 )
    Traks: 5
    menus: 3
    Duration: 77,36 minutes
    Space available on the disc: 30,8Go
    It seems that the first steps were processed properly. I saw the beginning of step2 ( menu and transitions ) and the beginning of the coding of the first sequence. When I came back the following morning ( I estimated a duration of the coding of about 4 hours ) the following message was displayed: " burning completed, erors were detected during the burning", but nothing was burned on the DVD ( virgin medium ? )
    I also tried to make an image disc, with the same result. I have seen, working on a test DVD, that there is a step " multiplexing" before burning, and I suppose that the error occured during that step.
    What do you think was wrong with my application. Thanks in advance for your help
    Claude Finzi
    I expect that you will understand my translation from french to english

    To Beverly Maneatis:
    Thanks for your answer dated 09/10. I did what was suggested in your message. To summarize, I have 8 slideshows1 to 8 ( I used the translation of the french word diaporama given by "Eurodicotom", an online free dictionnary of the European Commission, which, by the way, does not know the word "slideshow", nobody is perfect... ).
    1- I burned: 1 2 3 5 7 56 minutes: no problem
    2- I burned 5 6 7 8 57 minutes: no problem
    3- I burned: 4 5 6 7 8 77 minutes: multiplexing error
    4- I burned: 4* 20 minutes: no problem
    * It seemed that the problem was due to slideshow 4 which was the only one not burned with problem
    The slidehows dont seem corrupted...
    Any other idea?

  • Why does printing a pdf take more than one hour?

    Printing a single page from a pdf document (simple text) takes well over one hour. Surely, this can't be normal. Is this a known bug or is something wrong with my setup? Is there a solution/workaround?
    Mac OS X 10.7.3, Canon MP550 printer.

    jmsuijkerbuijk wrote:
    The size of the document is 15.3 MB. I only needed to print one single page from that document, which took me about 70 minutes.
    For the record it is possible to have a large text-based PDF. What can increase the file size is the presence of images in the document. I have a training document I created in Word with lots of screen grabs that is 17MB. After converting it to PDF using Acrobat Pro the resulting PDF is 9.6MB. I also have a Snow Leopard manual - one of the David Pogue missing manuals - that is 15.2MB. So a large PDF file does not automatically mean it is image-based as has been suggested. And even if it was image-based file, which is usually TIFF encoded for b&w and JPEG encoded for colour documents, a single page of that document should not take that long to print.
    With the document open in Acrobat you can select File > Properties and under the Description section you will see what application created the document and under the Advanced section you will see what application was used to create the PDF. This will give you some insight into the type of document you have. But if you did not create this PDF then there is not much you can do anyway.
    If the same single page prints fine using Preview, then there could be a print setting in Acrobat that is causing the long delay. One setting is located in the Advanced print dialog menu. With the print dialog window open, you will see the Advanced button (outlined in red).
    With the Advanced setting window displayed you will see the setting "Print as Image". Having this enabled can dramatically increase the file size of the document to be printed.

  • HT3951 Why is the download of a purchased movie taking more than one hour?

    Why is the purchased film taking so long to download on my TV?.

    Welcome to the Apple Community RosiePoppy.
    The first thing to check would be your internet download speed, you can do this at www.speedtest.net.
    1080p HD movies require a recommended speed of 8 Mbps, 720p HD movies require a recommended speed of 6 Mbps, while SD movies require a recommended speed of 2.5 Mbps.

  • I want to pare down my inbox mails. Can I delete more than one page of inbox multiple mails, e.g., all mails from an address that number in the hundreds, all at one time?

    I only know to delete emails I want to discard, after search and finding hundreds, by the page (up to 50). How can I delete all at one time, to save me hours of tedious work?

    Firefox doesn't do email, it's a web browser.
    If you are using Firefox to access your mail, you are using "web-mail". You need to seek support from your service provider or a forum for that service.
    If your problem is with Mozilla Thunderbird, see this forum for support.
    [http://www.mozillamessaging.com/en-US/support/] <br />
    or this one <br />
    [http://forums.mozillazine.org/viewforum.php?f=39]

Maybe you are looking for