More than one loop in audio file

Please, allow more than one loop in a wave file. This functionality was present in the Adobe Audition 3.0, but it is gone now. The sampler tab is gone from the metadata. Please, bring it back. Even though, the user can set more than one region marker in the wave file, only one of them is internally set to be understood as a loop and there is no way how to set more loops in a wave file. Please add this functionality back into the Audition.

Only one audio file can be used in a Lightroom slideshow.
You'll have to combine multiple songs into a single audio file (e.g. using Audition) then use the single audio file in the Lightroom slideshow.
For more flexibility, you can use commercial software such as ProShow Web, Gold or Producer which comes with a free Lightroom plugin
ProShow Gold - Create Fast and Fun Photo Slideshows
ProShow Web - Instant Photo and Video Slideshows from your Mac or PC
Plug-ins for ProShow

Similar Messages

Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File - Export - Album name with number).

Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File -> Export -> Album name with number).
Exporting a single Event retains the Event name which is what I'd expect. But highlighting more than one event and exporting it renames the images to Events 001.JPG, Event 002.JPG etc.
I was recently on holidays and had all my events nicely split on Dad's computer but when I went to export it I couldn't retain any of this information. Now I have to replicate this all again on my computer.
It wasn't possible to export the entire library as the external drive was fat32 format an I didn't want all of it. It would be nice to export a bunch of events to someone and have it retain the name.
Does anyone have a work around or will this be fixed at some point by Apple?

Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File -> Export -> Album name with number).
Exporting a single Event retains the Event name which is what I'd expect. But highlighting more than one event and exporting it renames the images to Events 001.JPG, Event 002.JPG etc.
I was recently on holidays and had all my events nicely split on Dad's computer but when I went to export it I couldn't retain any of this information. Now I have to replicate this all again on my computer.
It wasn't possible to export the entire library as the external drive was fat32 format an I didn't want all of it. It would be nice to export a bunch of events to someone and have it retain the name.
Does anyone have a work around or will this be fixed at some point by Apple?

More than one struts-config.xml files in one project

Hi all
Can we have more than one struts-config.xml files in one project developed using struts.
If so what is purpose and how to do this.
Anybody please explain on this topic.
Thanks
Parvathy

Hi all
Can we have more than one struts-config.xml files in
one project developed using struts.
yes it is possible
If so what is purpose and how to do this.
it is use for odular application so developer won't share a single configureation file.. as you know struts-config.xml is defined on the web.xml
like this:
<servlet>
<servlet-name>mybank</servlet-name>
<servlet-class>org.apache.struts.action.ActionServlet
</servlet-class>
<init-param>
<param-name>config</param-name>
<param-value>/WEB-INF/struts-config.xml</param-value>
</init-param>
<init-param>
<param-name>config/module1</param-name>
<param-value>
/WEB-INF/struts-module1-config.xml
</param-value>
</init-param>
</servlet>

When I read a pdf document using Safari I'm unable to read more than one page of a file. A padlock icon is locked on the tab. Please help.

When I read a pdf document using Safari on my IPad I'm unable to read more than one page of a file. A padlock icon is locked on the tab. Please help.

Hi snoreaustralia,
It sounds like you just need to associate the PDF filename extension with Acrobat, rather than Preview. Please see this document from the Microsoft Help for instructions on choosing the default program for opening a particular file type (in your case, PDF): Change which programs Windows uses by default - Windows Help
Best,
Sara

Can i make more than one faces-config.xml file ?

Can i make more than one faces-config.xml file under one project or application, if yes than how it will link.

Just that you know,
In the second week of july I was taking the Jdeveloper/Jheadstart course at Oracle Netherlands. During that course we were asked to split the faces-config. After splitting it, we were not able to find the navigation rules that were defined in the first faces-config in the web.xml. The Jdeveloper IDE was confused........
However, we were able to use the navigation rules (type in manualy) and that worked in the application.
I talked about it with Steven Davelaar and he thought it might be a bug. I don't know if it's reported, and I don't know if it's fixed.
So, if you get confused.... it works, but Jdeveloper might have some problems with it.
Luc Bors

Writing more than one channel to a file using Xaincnbg VI from the Universal Library

Hi,
Could anyone help me with writing more than one channel to a file? I am using the Universal Library version 5.40 with LabView 7.0 with the Xaincnbg VI.
With one channel everything in my program works beautifully, but when I add another channel and graph and wire it to the Write LVM only one channel ends up being written to the file. It seems like there should be some function that works to add the two output arrays or something of the sort, but I can't seem to find it.
If anyone has come across this problem or knows of how it might be solved, I would really like to hear about it!
Thanks

Oops, forgot to attach the files...
And, pics of the VI's, in case you don't have LV8.2
Message Edited by LabViewGuruWannabe on 05-22-2007 06:15 PM
Attachments:
subAIN.vi ‏24 KB
AnalogDataExample.vi ‏118 KB
AnalogDataExamplePics.zip ‏172 KB

RFC to XI File - can NEVER EVER get more than one record in Output file.

Hi guys
This might be related to my other post on File conversion but whatever I do I just can't seem to get more than one record in the output file
the payload from R3==> XI seems fine
for example
<?xml version="1.0" encoding="UTF-8" ?>
- <rfc:Z_XI_005_RFC xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
- <IP_CUSTOMER_HEADER>
- <item>
<CUSTOMERID>1000001</CUSTOMERID>
<COMPANY>One-time ship-to</COMPANY>
<SHORT_NAME>ONE-TIME</SHORT_NAME>
<STREET />
<STREET2 />
<STREET3 />
<STREET4 />
...... more data
</item>
then next customer master data and so on
- <item>
<CUSTOMERID>1000005</CUSTOMERID>
<COMPANY>ddfask</COMPANY>
<SHORT_NAME>;LK;L</SHORT_NAME>
<STREET />
<STREET2 />
<STREET3 />
<STREET4/>
etc etc until
<HKUNNR>60000</HKUNNR>
<SALES_REGION />
</item>
</IP_CUSTOMER_HEADER>
</rfc:Z_XI_005_RFC>
All I get on the Output target file
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:MT_customer_header xmlns:ns1="http://avenue.com/xi/test">
<CustomerId>1000001</CustomerId>
<company>One-time ship-to</company>
<shortname>ONE-TIME</shortname>
.... more data
</ns1:MT_customer_header>
the <item> and subsequent records all seem to have vanished.
I must be doing something PARTICULARLY stupid as nobody else ever seems to have this problem -- I've tried almost every possible combination but still to no avail
The function module is passing a table to XI in the correct structure and the payload seems to be fine so what on earth is broken here !!!,.
Cheers
Jimbo

Thanks everybody -- it's working now
RFC call was passing data correctly
function z_xi_005_rfc.
""Local interface:
*" TABLES
*" IP_CUSTOMER_HEADER STRUCTURE ZAP_CUSTOMER_INFO_2
endfunction.
in debug mode table data was fine -- in this instance 3 records were being passed.
3 errors in mapping etc fixed (with help from SDN - thanks)
1) missing the ITEM level in the Data type (hence mapping)
2) needed 0:unbounded in the occurrence
3) also mapping Item====>Item was missing (sub fields were ok)
Points awarded
final file output ok output now ok (with 3 fields only for testing)
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:MT_customer_header xmlns:ns1="http://avenue.com/xi/test">
- <item>
<Customerid>1000001</Customerid>
<company>One-time ship-to</company>
<shortname>ONE-TIME</shortname>
</item>
- <item>
<Customerid>1000005</Customerid>
<company>ddfask</company>
<shortname>;LK;L</shortname>
</item>
- <item>
<Customerid>1000010</Customerid>
<company>One Time Customer Test</company>
<shortname>SADFIWQEFG</shortname>
</item>
</ns1:MT_customer_header>
Now only the final problem to make file content conversion work.
Once again thanks --sometimes what seem trivial or simple problems take AGES to fix until someone else gives you a clue --that's why boards like SDN are great value.
Cheers
Jimbo

More Than One Hour Footage Audio Rendering Issue in Adobe Media Encoder (from AE)

Hi every one,
I'm having a render issue when I send an After Effects composition longer than 1 hour to Adobe Media Encoder for encoding H264 files. In this case, I'm trying to render an already rendered 70 min. 23,976 fps DPX sequence paired with a corresponding ".wav" audio file into the composition and the H264 file rendered by AME plays silent for the first 10 minutes and past those 10 "silent" minutes the audio comes back normally during the last 59 min and 59 sec exactly.
I've tryed every posible "solution" (changing the audio file from .wav to .aiff and .mp3) and assigning more ram to Adobe Media Encoder and it renders the same every single time.
Please Help!!!!
Oscar.

If you can't track down the audio problems some other way you have two options. Render to a production codec in AE then compress your production master in AME or tender only your subtitles (or use dynamic link) to a lossless with alpha format in AE and marry them to the original video and audio in PPro.
Actually, the first thing I would have tried when audio problems showed up would have been to render a production master using a visually lossless format like QuickTime JPEG 2000 and then compressed in the AME.

Exiting more than one loop at a time?

I have craeted a Simulated Annealing program. The pseudo code is this:
int          temperature = x;
double coolingFactor = y;
int          iterationsAtTemperature = z;
int          currentChromosomeFitness = a;
do{
    for(int counter=0; counter<iterationsAtTemperature; counter++){
        ...... generate new solution ......
        ...... evaluate new solution ......
        ...... swap with old solution if fitter ......
        // ESCAPE IF A SOLUTION OVER A CERTAIN FITNESS IS FOUND
    iterationsAtTemperature++;
    temperature = temperature * coolingFactor;
)while(temperature > 0);I would like to know how to escape all of the loops when a solution over a certain fitness is found. Any ideas in how to escape not only the inner for loop but also the do-while loop in one.
Cheers

One way:
        int x = 0,y = 0;
        done: for (int i = 0; i < 100; i++) {
            for (int j = 0; j < 100; j++) {
                if (i == 50 && j == 50) {
                    x = i;
                    y = j;
                    break done;
        System.out.println(x + "," + y);

Syncing more than one MS Outlook Contact file

Hi. I have several (4) Contact files in MS Outlook. At first I sync'd the main Contact file. I have three others and when I choose / browse another folder, I only see one other Contact folder which I can set as default and sync. My question is how can I set up Outlook to recognize my other (2) Contact folders? Weffy
Solved!
Go to Solution.

I have somewhat of a similar problem>
I have retained a corporate Curve 8300 from my previous company. I want to transfer the contacts from my BB to my MS Outlook where i already have other contacts. I downloanded BB desktop mger 4.2.1.8 version, it actually syncs but iam unable to bring the contects to work with my Outlook.
can you please help

More than one space in the file is condensed to one space

Hi, buddies.
my file format is like below:
0010XXXX2001X9001XX11
where 'X' stands for space.
I use File adapter to read this kind of format txt file into XI and the content is changed to:
0010X2001X9001X11
I do not make any specification in sender CC. And How can I keep those space in the file content when reading it into XI. Do I need to make any specification configuration in File sending CC?
BJ

Hi,
The below command will help u to trim black spaces
NameA.fieldContentFormatting
For more information on FCC find below link
http://help.sap.com/saphelp_nw70/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm

How do I merge multiple Excel files with more than one tab in each file using PowerQuery?

Hello
I have 12 Excel (.xlsx) files and each file has three identically named and ordered tabs in them.
I know how to merge multiple Excel files in a folder using M (those guides are all over the web) but how do I merge multiple Excel files with multiple (yet identically named and ordered) tabs? Surely it is possible? I just don't know how to do it in M.
Cheers
James

What Laurence says is correct, and probably the best thing to do when the sheets have differing structures. Here is an alternate approach that works well when the sheets all have the same structure.
When you first open the Excel file from Power Query, you can see its structure in the navigator at the right-hand-side of the screen. If you select the root (which is the filename itself) and click Edit, you'll see all the tabs in the sheet as a single table.
You can now do filtering based on the Name, Item and Kind values. When you've reduced the set of things down to the sheets you want, select the Data column and say "Remove Other Columns". If the sheets don't have any header rows, you can just click the expand
icon in the header and you'll be done.
Otherwise, if the sheets have headers or if some other kind of sheet-level transformation is required against each sheet before doing a merge, you'll have to write some M code manually. In the following example, each sheet has a header row consisting of
two columns: Foo and Bar. So the only step I need to perform before merging is to promote the first row into a header. This is done via the Table.TransformColumns operation.
let
    Source = Excel.Workbook(File.Contents("C:\Users\CurtH\Desktop\Test1.xlsx")),
    RemovedOtherColumns = Table.SelectColumns(Source,{"Data"}),
    PromotedHeaders = Table.TransformColumns(RemovedOtherColumns,{{"Data", each Table.PromoteHeaders(_)}}),
    ExpandData = Table.ExpandTableColumn(PromotedHeaders, "Data", {"Foo", "Bar"}, {"Data.Foo", "Data.Bar"})
in
    ExpandData

Breaking more than one loop in single command

Hi, I'm wondering if it is possible to break out of a two loop from the nested loop.
i.e
while(condition) {
while(condition2) {
     break; //but I'm I want to break both loops
}for now I have something like this
boolean something=false;
while (condition) {
while (condition2) {
    if (condition3) {
     something=true;
     break;
if(something) break;
}which works, but seems inefficient. Thanks to anyone who can help.

It's not too bad unless you have killer loops, but look here at the labeled break statement
http://java.sun.com/docs/books/tutorial/java/nutsandbolts/branch.html#break

More than one faces-config.xml

hi!
i am working in a big team, and would like to create more than one faces-config.xml file.
is it possible? how?

Yes!! You can create multiple faces-config.xml files.
Make changes in your deployment descriptor to include multiple faces config files:
<context-param>
     <param-name>javax.faces.CONFIG_FILES</param-name>
     <param-value>/WEB-INF/config/faces-config-one.xml,
     /WEB-INF/config/faces-config-two.xml,
     /WEB-INF/config/faces-config-three.xml,
     /WEB-INF/config/faces-config-four.xml</param-value>
</context-param>When there are too many modules, with many people working on the project simultaneously, having multiple faces config files makes it a lot more easier to manage.

More than one Spaces are getting trimmed on BizTalk BAM portal

Hi All,
We are implementing BAM at our customer place , we observed ,if any field contains more than one space in input file then these spaces are getting trimmed in single space,however it is correctly sitting in the BAMPrimaryImport database
For example if input file ,which is processing through BizTalk, and if any field which value is "AB CDE" (field contain three space here ) then in portal it is appearing as
"AB CDE" (Only one space here) by default
I am not sure how theses values are displayed in portal and how to relove this default behiaver of BAM Portal, if somebody have faced this situation then i will appreciate your help please
Thanks
Yash

Well then I guess it's a Portal issue (yes you already knew that!) :-)
I know not everybody agrees with me, but the way I look upon it, the Portal should not be used as a product, but merely as a testing tool and inspiration as to what one can build on top of ones BAM activities. In other words, if you need to present your
BAM data to users, you should build your own; Pivot Tables, Reporting Services, ASP.NET Web sites etc. etc. on top of it.
Don't know if this is true, but I've heard that the BAM portal was a beta-product that shipped for the first time with BizTalk Server 2006 without being completed, and no code changes has taken place since.
Morten la Cour

More than one loop in audio file

Similar Messages

Maybe you are looking for