More than one trusted resource for OIM 9.1.0.2

Hi all,
I just heard that in OIM 9.1.0.2 it is possible to have more than one trusted source, as it is not necessary to configure it to Xellerate User Resource Object. Is that correct?
To configure OID Connector as Trusted Source on OIM 9.1.0.2 do I have to import its XML file?
Regards
Hossam

From what i recall, the OID connector does not come with a second object for the trusted one. I think it comes with the Xellerate User object updated.
To make a new trusted resource, create the resource object, check the trusted source box. On the recon fields, add in all your recon fields you want to use. On the recon action rules tab, set your rule for match not found to create a user, and entity match to link to user. Create a reconciliation rule for this object and the xellerate user object. Create a provisioning process defintion with no additional tasks. On the reconciliation field mappings tab, map all your recon fields to OIM user fields. You'll want to create any entity adapters/event handlers needed to provide required fields such as User Type, and User Role, and Organization and so on.
Now when you get a recon event for this object, it will be a trusted object and can create new users for you and update the OIM profile.
-Kevin

Similar Messages

  • Can we have more than one trusted system in Oracle Identity Manager?

    Can we have more than one trusted system in Oracle Identity Manager?

    Can we pull employee from one trusted system and in the same way can we pull some contractors from other trusted system simultaniously?
    yes you can. In the schedule task you'll have to put your query in such a way that it brings both data.
    Can both trusted systems can be active at the same time pulling two types of users from two trusted systems?
    You have to run both recon in sequential manner so that it can pull correct data for OIM
    Some where i read in doc that only one target system can be designated as trusted system if it as has more than one the recons will not work properly...
    I don't think that it results into issue. But we have to see the sequence mainly. Otherwise it will results into wrong data

  • How can I maintain more than one contact person for a supplier

    Hi
    As per our business requirement , How can I maintain more than one contact person for a single supplier in SRM?
    How these contact persons are supposed to log in to a portal with different user id and passwords and access the bids for same supplier.
    we are in SRM 7, and currently we are creating contact person throug customised BDC.
    please advice.
    Thanks & Regards
    NITIN
    Edited by: nitinkk on Sep 9, 2011 10:22 AM

    Dear Yaniv,
    Thanks for your information,
    I am able to create  users But my problem is How these contact persons are supposed to log in to a portal with different user id and passwords and access the bids for same supplier ? Is there any kind of maping is available for the user/ contact person to the supplier no.??
    Thanks & Regard
    NITIN

  • How can I create more than one printer queue for a printer

    I would like to have more than one "default" setting for my printer.  This is so I can use a 3rd party print utility (fingerprint) to print to a non-airprint printer from my ipad.  The utility prints using the default configuration.  I don't need to get fancy here.  Just "draft B&W' , "normal", and "Color best quality".  If I need something else, I can always email the document to my MacBook.  The utility has something about a virtual printer, but all I could find about that is that it is used for PDF printing and maybe a workflow.
    My technology level:  Used to be a programmer,  after a decade of retirement, I can't even program an applescript today.

    Take a look at this add-on.
    https://addons.mozilla.org/en-US/thunderbird/addon/signature-switch/

  • EJB3 - More than one remote interface for Session Bean?

    Hi,
    Is it possible in EJB3 to have more than one remote interface for a SessionBean?
    I have seen it posetd on here that it is possible but never been able to find any other information.
    Using JBoss as my App Server, I have deployed an App, where a SessionBean is defined as implementing 2 interfaces, both of which are annotated using @remote.
    However when I examine the JBoss JMX Console, Global JNDI Namespace only one remote interface is listed, and indeed it is the first one defined in the SessionBean.
    Considering I use a String similar to (MyApp/MyBean/remote) to do the JNDI lookup, this would indicate that it is not possible to have more than one remote interface.
    1. Is this a JBoss specific limitation?
    2. Is there another way of performing the JNDI lookup?
    Thanks,
    Alan.

    Hi,
    Thanks for prompt response! I tried the suggestion in my application, and the output from JBoss JMX Console was
    +- XXXBean (class: org.jnp.interfaces.NamingContext)
      |   |   +- remote (proxy: $Proxy291 implements No ClassLoaders found for: xxx.xxx.xxx.xxx.xxx.Remote1 (no security manager: RMI class loader disabled))Again only displaying the remote interface that is first in the @remote ({ Remote1.class , Remote2.class}) list. This would lead me to believe that JBoss does not support this.
    Can anyone confirm this?
    Alan.

  • How to have more than one free good for a material ?

    Hi everyone,
    we have this requirement from the user where he wants give more than one free good for a material.
    As far as i know we can configure only one free good for a material in standard SAP.
    if have any idea about how to achieve this please guide me how to configure the same in SAP.
    thank you in advance

    Hi
    Check my two links where I have explained this.
    Free goods using Sale order BOM methodology
    Different business scenarios and Sales BOM techniques for header and item level stock and prices
    Thank$

  • More than one Planning plant for a maintenance plant.?

    hi Friends, can we have more than one Planning plant for a maintenance plant.Is there any advantage or disadvantage of this condition.?

    Hi,
         You can have Maintenance Planning Plant & Maintenance Plant in any of the follwing ratios, i.e., 1:1 / 1:n / n:1. Actually in Maintenance, there can be electrical & mechanical maintenance.
              In the case of 1:1 relation, all the maintenance activities (Electrical & Mechanical) will be planned by single Maintenance Planning Plant for single Maintenance Plant.
            In case of 1:n, single maintenance planning plant will do the plaaning of maintenance activities for all the maintenance plants.
          In case of n:1, electrical activity will be planned by one Maintenance planning plant & mechanical activities by another planning plant for a single Maintenance plant.
          Defining Maintenance planning plant & maintenance plant in different relations will help us in generating different kind of reports.
    I am looking forward your reply.
    Regards,
    Maheswaran.

  • More than one entity found for a single-object find method

    Hi everyone...
    I have this error when my webservice is running..I don't know what it means and what would be the best solution..
    <pns:message>More than one entity found for a single-object find method.</pns:message>
    it throws an Exception..
    Thanks!

    = More than one row found in a DB with the "unique" key supplied...
    Your method is returning an object where it should return a collection ?
    Enjoy

  • More than one outbound interface for the webservice scenario

    Hi Experts,
    Is it possible to have more than one outbound interface for the Webservice synchronous scenario? I have tried it , but I couldn't implement it.
    I would like to have your suggestions.
    Regards
    Sara

    Hey,
    Creation of a wsdl file
    /people/riyaz.sayyad/blog/2006/05/07/consuming-xi-web-services-using-web-dynpro-150-part-i
    N:1 seemz he was refering to multimapping scenario.
    <b>Cheers,
    *RAJ*
    *REWARD POINTS IF FOUND USEFULL*</b>

  • How to display more than one column with for each

    Hi guys,
    how to display more than one column with for each like below?
    for each
    Item1
    Item2
    Item3
    Item4
    Item5
    Item6
    Item7
    Item8
    Item9
    Item10
    End for each
    for each          
    Item1     Item2     Item3
    Item4     Item5     Item6
    Item7     Item8     Item9
    Item10          
    End for each

    Take a look at this to see if the solution provided would work for you: https://blogs.oracle.com/xmlpublisher/entry/multi_column_row_woes
    Won't you have more than 10 records in your data file ? If you are going to have only 10 items then you may be able to use position() function to limit it to 3 each..
    Take a look at this: https://blogs.oracle.com/xmlpublisher/entry/turning_rows_into_columns
    Thanks,
    Bipuser

  • Can we maintain more than one shipping condition for a customer

    Hi,
    Can we maintain more than one shipping condition for a customer

    Hi Raj,
    Yes you can maintain the different shipping condition for one customer but for this that SOLD To Party should have different SHIP to Party also as we mainatin the shipping condition for Ship for the party. In other words you can maintain as many shipping condition equal to the number of ship to party.
    Other way is if that customer is in different sales area then you can maintain the different shipping conditions for that customer in all the different sales area.
    Hope I could make myself clear enough to help you.
    Please reward if its useful.
    Regards,
    Abhi.

  • Enter more than one personnel number for the same confirmation in CO11N

    More than one labor working on Machine work center simultaneously.
    So that during production orders confirmation in CO11N we need to enter more than one personnel number for the same confirmation but in CO11N the system allow me to enter only one personnel number.
    Note: I can not distinguish between the productions for each labor so that I can not enter separate confirmation for each labor.

    Hi,
    You can use the User Exit: CONFPP07  Single Screen Entry: Inclusion of User-Defined Subscreens
    for this purpose..
    Take help from the ABAPer for this enhancement..
    Regards,
    Siva

  • How do I  create more than one CSS style for text links?

    Hello,
    Just like the title says, I need help with creating more than one CSS text link style in Dreamweaver CS4. For instance, I want the navigation on the website I'm building to have a different text link style than a link in some part of the body copy. I've been playing with Dreamweaver for a while and can't find any way to do this. If it's even possible to do this, I would really appreciate any help.

    Yes it is possible but as you have failed to provide a valid link to your site, I will tell you in general Terms:
    1) First create a class or an ID to to your Nav bar;
    2) Now style your navbar in such a way that these styles will only apply to your nav bar.  To do this, you start your style by doing something like this:
    ul#vavigation {.........}
    ul#navigation a {.........}
    ul#navigation a:hover {.........}
    ul#navigation li {.........}
    your html code might look like this:
    <ul id="navigation">
         <li><a href="#">Home</a></li>
         etc etc .........................
    </ul>
    hth

  • Can I use more than one Apple ID for an Apple TV?

    I wanted to use more than one Apple ID account on my Apple TV, is that possible?

    Welcome to the Apple Community.
    You can only use one ID for purchasing from the Apple TV, but you can stream content from multiple libraries even though they have different ID's

  • Can there be more than one transport targets for a business system in sld

    Hi All,
    I have a question about transport targets in sld for sap xi 3.0 sp19.
    We have a requirement where a business system needs to have two transport targets.In SLD i see that only one transport target can be assigned. Is there any way to assign more than one transport target to a business system?
    I know that there can be more than one source for a business system where more than one  different business systems have the same business system as the target.
    I am not sure if a business system can have more than one transport target .If yes , what is the way to add more than one ?
    Please help .
    Thanks,
    Padmaja

    Hello,
    I know that there can be more than one source for a business system where more than one different business systems have the same business system as the target.
    As far as I know, you would have to change the target everytime you will transport it to a different target e.g 3 target systems = 3 times you change the transport target in SLD.
    Regards,
    Mark

Maybe you are looking for

  • Is there a way to interface HTML buttons and responses to Labview

    Hi all. I am a long term Labview user, but this is an area I am relatively new to. Ultimately, I want to get an iPad to receive live streaming video from a Labview program running on a PC over wireless Ethernet. Buttons on the iPad should trigger eve

  • Lost windows XP on Mac now running lion can XP be reinstalled and if so is it on the snow leopard disc

    Lost windows XP on iMac now running lion can XP be reinstalled and if so is it on the same disc as snow leopard    

  • How to modify customer generated DataSource?

    Hi Experts, I have a DataSource "1ZICM_DOCSE" which currently extracts some of the fields from source table "ZICM_DOCSE". After some investigation, I discover that some necessary fields from the table are missing in the extraction structure. Question

  • Apple still selling Airport Express cards?

    I have an iBook G3 bought in Japan and now want to get a card to use it wirelessly with a 3Com router that works OK with my PC. Problem: Apple in London say I have to buy the card through a third party vendor, who charge like £139 for the card alone.

  • Adobe Updater isn't Updating

    Adobe Updater keeps popping up and telling me I have new updates. I click OK, I type in my password, I watch the progress bar fill up, but then instead of installing the updates it just keeps going back to the original window telling me I have new up