More trouble with PDF folios

Hi.
I also have a trouble with PDF folios, where vertical article has 2 pages and horizontal article has 1 page.
When i set that folio horizontal swipe only, there will be one extra blank page at the horizontal article.
When there is more pages in articles (4 and 2 accordingly), there is no such artifact.
Ants.

have you tried my example that I just posted here: http://forums.adobe.com/message/4173179#4173179
With kind regards,
Klaasjan Tukker
Adobe Systems

Similar Messages

I am feeling so ripped off right now. I have wanted a Mac for years and believed the hype about it's stability and I have had more trouble with this Imac 2011 than I have ever had with a pc. It locks up with several software products from APP store.

I am feeling so ripped off right now. I have wanted a Mac for years and believed the hype about it's stability and I have had more trouble with this Imac 2011 than I have ever had with a pc. It locks up with several software products from APP store. I have already had to have a technician to look at it and really couldn't figure out what the deal was. I was told that the APP store software should give me no problems but the truth is that it locks up on the software. This machine is only 4 weeks old and I am using 37 g on a 1 T hard drive. There is no reason for it to be locking up. Also, when I try to use the help program, it always tells me that I am not connected to the internet even though I have used both the mail program and the browser with no problem just before that. I successfully used the help program on my pc lots of times. I did not need a $2000. plus machine to just get email. I just wanted to unload on somebody that might understand my pain and after checking out this site...I think there is a few of you out there.

I was told that the APP store software should give me no problems but the truth is that it locks up on the software.
The apps downloaded from the Mac App Store are written by third party developers, not Apple. If you have problems with those apps you need to visit the support area for their websites. Launch the App Store, locate the app name. You should see a support link.
when I try to use the help program, it always tells me that I am not connected to the internet even though I have used both the mail program and the browser with no problem just before that
Go to ~/Library/Preferences. Move the com.apple.helpviewer.plist file from the Preferences folder to the Trash. Restart your Mac, try the Help menu.
If you need help finding that file, hold down the Finder icon in the Dock then click: New Finder Window. From the menu bar top of your screen click: Go > Go to Folder. Type this in exactly as you see it here: ~/Library/Preferences/com.apple.helpviewer.plist That will take you right to that file.
(.plist) files stores information about a particular app or in this case, the Help viewer. Often times deleting the .plist file resolves the issue.
It's fine to "unload"... we understand that you expect your iMac to be stable but there are times when things go awry. That's why we have these forums so that you can you get help.
You may want to read up on how to repair the disk if necessary or reintsall Lion > OS X Lion: About Lion Recovery
Apple - Find Out How - Mac Basics
How to "switch" from PC to Mac > Apple - Support - Switch 101
I'm sorry you feel, "ripped off", but you are using the world's most advanced operating system and it may take some time to adjust to a new OS. http://developer.apple.com/technologies/mac/

I am having trouble with PDF 8.1 reader. Tried to download upgrade to 10.1 reader. Rec'd error mes

I am having trouble with PDF 8.1 reader. Tried to download upgrade to 10.1 reader. Rec'd error message. Message said Adobe 8.1 needed to be updated by this set-up? Isn't this part of download upgrade process?? How can I straighten this out?

It is always better to uninstall the older version when skipping versions. What is your operating system?

Trouble with PDF fonts - fields only

We're having trouble with our PDFs once the data is merged into the PDF template. All of the merged data appears cut in half in the form fields so only the top half of the letters are shown; the rest of the document is fine. We think this could be due to a font issue, but loading different fonts haven't seemed to make any difference. Could this be caused by anything besides the fonts?
Thanks!
KH

Klye
Pdf is designed for presenting information graphically to reduce the file size. This reduction is achieved by making it an uneditable - something that comes in handy if you don't want people to alter your content.
You can (using a pdf writter) create pdf forms where information can be added in to a text field or box. However if you want to edit the content from a pdf file then you could select the text and copy and paste it in to a document like Pages or Word and then re-export when you're finished.
But I'm affraid you can't edit pdf as such - this is the case on Macs and PCs. If you need to edit documents on different platforms then you'll need to find a common editor. There's Office for Mac (student teacher versions) or you could try OpenOffice Org - it's free, works on both Macs and PCs, and will convert most Word documents provided there's not too many tables or a complex layout format.
Hope this helps
Stu

TROUBLE WITH PDF'S!

So I am having trouble with editing anything i save on a PDF. I recently saved a research paper in PDF format so it would be compatible at my school where there are microsoft only computers. I opened and realized I couldn't edit anything! I tried looking around settings to see if it was a "read only" file but couldn't find anything to make it so I can revise the PDF file. can someone help me?

Klye
Pdf is designed for presenting information graphically to reduce the file size. This reduction is achieved by making it an uneditable - something that comes in handy if you don't want people to alter your content.
You can (using a pdf writter) create pdf forms where information can be added in to a text field or box. However if you want to edit the content from a pdf file then you could select the text and copy and paste it in to a document like Pages or Word and then re-export when you're finished.
But I'm affraid you can't edit pdf as such - this is the case on Macs and PCs. If you need to edit documents on different platforms then you'll need to find a common editor. There's Office for Mac (student teacher versions) or you could try OpenOffice Org - it's free, works on both Macs and PCs, and will convert most Word documents provided there's not too many tables or a complex layout format.
Hope this helps
Stu

Trouble with PDF Export from ID CS6

I am having the following problem with PDF exported from an ID CS6 document. I have a couple of pages where a b&w photograph is partly covered by a non-wrapping text frame and in that text frame there is blue text. In ID it looks like this:
It also looks like this in the exported PDF in Apple Preview.app and for most of these pages they also look good in Acrobat Pro. But two are giving me trouble. They look like this:
and sadly, they also look that way when Ingram tries to use them. I export using the typical print format PDF/X-1a:2001
I have a minimal ID document that shows the problem with 3 such pages, one with the problem.

Select one of the troublesome objects and open the attributes panel as well as the effects panel.
Give us a screenshot.

More Trouble with queue permissions

In my last message I was having trouble with enqueuing to a queue using a PL/SQL wrapper around my java eneque class. I was getting this message:
JMS-173: Queue Table BPTEST2.COMMAND_TABLE not
found
It turned out I did not set the correct authorization on the stored procedure. I needed to add the clause AUTHID CURRENT_USER and my problem was fixed.
Now i have attempted to take this one step further and execute the stored procedure from a trigger. Now I am back to the same error. Is there a way to set the authorization in a trigger? If not, whose authorization is the trigger running under, the definer or oracle itself?
null

have you tried my example that I just posted here: http://forums.adobe.com/message/4173179#4173179
With kind regards,
Klaasjan Tukker
Adobe Systems

Trouble with PDF links

A little background: I work for an agency and have a peripheral responsibility for updating our website, so I am learning everything on Dreamweaver from square 1 basically. So bear with me as I muddle through this. A couple years ago a former employee installed version CS3 on the PC I use, and is the version I am working with to this day.
I need to post a .pdf link of a meeting agenda to a page on the site and have it show up when it's clicked. Links to previous meeting agendas on the page work fine, but the most recent one I added 404's, even though I follow the exact code as previous .pdf links.
My suspicion is that I trouble lies in the fact I have an old and unsupported version of the software, or some sort of conflict between HTML/HTML 5 (if something like that exists), or a combination of the two.
Thoughts and suggestions? Thank you.

My suspicion is that I trouble lies in the fact I have an old and unsupported version of the software, or some sort of conflict between HTML/HTML 5 (if something like that exists), or a combination of the two.
I think it's very unlikely that either of these would be involved. No doubt the issue is either with your code for the link, with your path to the linked file, or with remembering to upload the linked file. Can we see the code on the page (best way is to post a link to the live page)?
A little background: I work for an agency and have a peripheral responsibility for updating our website, so I am learning everything on Dreamweaver from square 1 basically. So bear with me as I muddle through this.
The more you know about HTML (and CSS) the easier this will be. It might be a good idea to spend some time on http://www.html.net, or http://www.w3school.com

More trouble with exporting for web

Alright,
Sorry to say but I am still having trouble converting/exporting my film trailer to the website for PC users to be able to access it.
I converted it to a quicktime movie film from FCP, which plays beautifully but apparently PC users can't see it still.
I have tried exporting to Compressor and tried every format there (mobile devices, web and so on...) they all came out pretty blurry.
Does anybody have a full proof plan for converting/exporting for website viewing (PC and Mac compatible)?????
P.S. It may help some of you to see the problem on the page http://www.inthelandofsmiles.com/Site/Film_Trailer.html
THANKS IN ADVANCE!

I will second the Flash suggestion. Great a .flv file and play it on your site with a flv player. Some are more difficult than others to use.
NOTHING is fool proof with this kind of stuff. Flash has the highest install rate on all computers and is as close as you can get to fool proof. You can also put a link on you site to download the latest flash player. The other plus is that it tends to have the best results with low file sizes. This is what YouTube and similar sites use to play their video.
PS. I highly suggest this flv player... It's free for non-commercial use and almost free for other uses...
http://www.jeroenwijering.com/?item=JWFLVPlayer

Trouble with PDF files in Safari for Windows

I downloaded Safari for Windows at work on my XP machine because I much prefer the Safari interface. The problem that I am having is that one of the web-based programs that I use at work does reports in PDF format and when I click on the link for a report Safari is popping up a window that says the document doesn't exist. Of course, the document does exist and my Internet Explorer and Safari for Mac that I have at home both view these reports with no problems through Safari. I have the most up to date version of Adobe Reader 8, and when I check the installed plugins through the help menu on Safari it shows that the Adobe plugin is installed. So, I have no clue how to get this to work, but if I can't get it fixed soon I'm gonna have to switch back to Internet Explorer (which I don't want to do). Can anyone help???

Try to uninstall and after that install Acrobat Reader 8 again.

Trouble with PDF created with Captivate 6

I have been using Captivate since version 4 and this is the first time I have had this problem. The generated PDF (which is the expected file size) displays a blank page with only the TOC button which sits there flashing rapidly. I have tried changing the targeted Flash Player version without any luck. Previews and HTML output is fine and so is the .exe file. I am using Adobe Acrobat 11 on a 64-bit Windows system. This is a fairly small project with about 15 slides and some FLV videos. I have no problems with Distiller with any of my other programs (FrameMaker, LiveCycle, Photoshop etc.). Any settings I can fiddle around with?
Any ideas?
Nadeem

Thanks for the helpful reference!
To anyone else having a similar problem: the solution (while not ideal, since it requires disabling a desired feature) is to uncheck the "Show TOC" box in the TOC settings. To reiterate what was discussed in the forum, the problem apppears to be localised to Acrobat Pro/Reader XI. So far there is no resolution from Adobe.
Nadeem

Trouble with PDF files in CS5

I'm trying to cover up text that i don't want to be seen in a public audience with a white box inside of Indesign. Low and behold, when i make the pdf you can still copy the text that has been covered up. Any ideas what would cause this? The original file is made in Indesign, and exported to a pdf.

John Mensinger wrote:
Nope. I've been trying for a while now to come up with an ID-applied mask or crop that effectively renders text from a placed PDF inert on re-export.
Can't seem to force it to flatten no matter what. Raster interaction, transparency, blend modes, overprint, etc. all fail.
All attempts were with Acrobat 4 compatibility. All text of the placed PDF survives re-export. You can't see it, but you can select it.
OK, so my last suggestion won't work, either.
Perhaps we should be looking at alternate strategies. Can you palce the PDF twice (or perhaps 4 times) and crop leaving a hole? Are you actually placing a PDF, or could you be using conditional text and turning it off? Casn you put the text in a non-printing frame? What's the reason for hiding the text?

Trouble with pdf document converted to word

I converted a pdf to a word document but it will only allow picture tools. It does not let me make changes to the word document.

Update: I have run additional tests today, seems like it's a font that is creating the problem:
I use Merriweather, which suddenly convert to shrunken size in PDF, but if I convert the document font to something more generic, e.g. Courier New, the font size remains accurate in the PDF version.

More trouble with for loops

This was my attempt:
function poor(){if(money < shopwin["prc"+$].text){shopwin["itm"+$].textColor = 0x999999;
shopwin["prc"+$].textColor = 0x999999;}
if(money >= shopwin["prc"+$].text){shopwin["itm"+$].textColor = 0xFFFFFF;
shopwin["prc"+$].textColor = 0xFFFFFF;}
for ($=1;$<9;$++){poor();}
at compressing this:
function poor(){
if(money < shopwin.prc1.text){shopwin.itm1.textColor = 0x999999;
shopwin.prc1.textColor = 0x999999;}
if(money < shopwin.prc2.text){shopwin.itm2.textColor = 0x999999;
shopwin.prc2.textColor = 0x999999;}
if(money < shopwin.prc3.text){shopwin.itm3.textColor = 0x999999;
shopwin.prc3.textColor = 0x999999;}
if(money < shopwin.prc4.text){shopwin.itm4.textColor = 0x999999;
shopwin.prc4.textColor = 0x999999;}
if(money < shopwin.prc5.text){shopwin.itm5.textColor = 0x999999;
shopwin.prc5.textColor = 0x999999;}
if(money < shopwin.prc6.text){shopwin.itm6.textColor = 0x999999;
shopwin.prc6.textColor = 0x999999;}
if(money < shopwin.prc7.text){shopwin.itm7.textColor = 0x999999;
shopwin.prc7.textColor = 0x999999;}
if(money < shopwin.prc8.text){shopwin.itm8.textColor = 0x999999;
shopwin.prc8.textColor = 0x999999;}
if(money >= shopwin.prc1.text){shopwin.itm1.textColor = 0xFFFFFF;
shopwin.prc1.textColor = 0xFFFFFF;}
if(money >= shopwin.prc2.text){shopwin.itm2.textColor = 0xFFFFFF;
shopwin.prc2.textColor = 0xFFFFFF;}
if(money >= shopwin.prc3.text){shopwin.itm3.textColor = 0xFFFFFF;
shopwin.prc3.textColor = 0xFFFFFF;}
if(money >= shopwin.prc4.text){shopwin.itm4.textColor = 0xFFFFFF;
shopwin.prc4.textColor = 0xFFFFFF;}
if(money >= shopwin.prc5.text){shopwin.itm5.textColor = 0xFFFFFF;
shopwin.prc5.textColor = 0xFFFFFF;}
if(money >= shopwin.prc6.text){shopwin.itm6.textColor = 0xFFFFFF;
shopwin.prc6.textColor = 0xFFFFFF;}
if(money >= shopwin.prc7.text){shopwin.itm7.textColor = 0xFFFFFF;
shopwin.prc7.textColor = 0xFFFFFF;}
if(money >= shopwin.prc8.text){shopwin.itm8.textColor = 0xFFFFFF;
shopwin.prc8.textColor = 0xFFFFFF;}
poor();
I tried a similar code to the first (above) for the following list, but it also failed.
shopwin.itm1.text = m_shop.inv.itm1.nm; shopwin.prc1.text = m_shop.inv.itm1.prc;
    shopwin.itm2.text = m_shop.inv.itm2.nm; shopwin.prc2.text = m_shop.inv.itm2.prc;
    shopwin.itm3.text = m_shop.inv.itm3.nm; shopwin.prc3.text = m_shop.inv.itm3.prc;
//(I actually needed 5 more just like this for itm4 through itm8)
I based the top code on this:
function buy(){if(actionBox == m_shop.inv["itm"+n].nm && money >= m_shop.inv["itm"+n].prc){
    char.inv["itm"+n] = m_shop.inv["itm"+n]; money = money - m_shop.inv["itm"+n].prc;} ;}
for (n=1;n<9;n++){buy();}
which worked fine. I should mention this last code is nested inside an "onRelease" as are the others.

I will second the Flash suggestion. Great a .flv file and play it on your site with a flv player. Some are more difficult than others to use.
NOTHING is fool proof with this kind of stuff. Flash has the highest install rate on all computers and is as close as you can get to fool proof. You can also put a link on you site to download the latest flash player. The other plus is that it tends to have the best results with low file sizes. This is what YouTube and similar sites use to play their video.
PS. I highly suggest this flv player... It's free for non-commercial use and almost free for other uses...
http://www.jeroenwijering.com/?item=JWFLVPlayer

Trouble with PDF FORM

Hello Adobe. We have our PDF form and are having issues with everyone being able to submit it from our website. The link is http://qualitystaffingsolution.com/test-pdf/
But after submitting it, one of our programmers can get his to go through on almost every browser but many other people who have tried it, upon clicking submit, the form does not show up in our forms central database.
Can anyone help, offer advice or have any thoughts? Thanks so much for your help!
Thanks!

Hi;
PDF in a web browser is problematic and we recommend against having the PDF set to open in the browser, we recommend that you have users download the PDF and use Adobe Reader or Adobe Acrobat to fill out the PDF.
The problem in a browser is that you don't know what viewer may be used to view/fill the PDF and if it is not Adobe Reader it will not work.
I would recommend you post the PDF for download and alert users that they should use Adobe Reader/Acrobat to fill and submit.
Thanks,
Josh

More trouble with PDF folios

Similar Messages

Maybe you are looking for