Most common BW data load errors in production and how to solve them ..
Hi All,
Most common BW data load errors in production and how to solve them ..
Any doc on it ,if so plz send it across to this id [email protected]
Thanks in advance.
Rgrds
shoba
hi
1) RFC connection lost.
2) Invalid characters while loading.
3) ALEREMOTE user is locked.
4) Lower case letters not allowed.
5) While loading the data i am getting messeage that 'Record
the field mentioned in the errror message is not mapped to any infoboject in the transfer rule.
6) object locked.
7) "Non-updated Idocs found in Source System".
8) While loading master data, one of the datapackage has a red light error message:
Master data/text of characteristic 'so and so' already deleted .
9) extraction job aborted in r3
10) request couldnt be activated because theres another request in the psa with a smaller sid
11) repeat of last delta not possible
12) datasource not replicated
13) datasource/transfer structure not active ´
14) Idoc Or Trfc Error
15. ODS Activation Error
Similar Messages
-
Processchain errors in Production and how to solve those issues
Dear All,
Please share some process chain errors in production and how to solve those errors as well,
Please send me if any one have the list of errors and how you are solved those..
I am very new to BW,am also preparing my list of errors and solutions to fix them..Please share me if any one have ?
ThanksHi
Table of Contents
1. Time stamp error 2
2. PSA error records 4
3. SID not found for characteristic 7
4. Error calling number range object 8
5. Trfc error 10
6. ALE REMOTE lock 13
7. Delta fails 14
8. Deleting setup table 18
9. How to run statistical setup for different Application components 19
10. How to do selective deletion 22
11. Roll up 24
11. Compression or collapse 25
12. How to do Attribute change run 27
1.Time stamp error
Resolution procedure
Go to RSA1Source system
Run program RS_TRANSTRU_ACTIVATE_ALL
Mention source system and Info source and then execute.
Now the transfer structure will be automatically activated.
Then proceed with the reload, it will get success now.
2. PSA error records
Go to details tab, we will find its packet no. and its record no.
Resolution procedure
Click on PSA icon in monitor and select the error data packet
Double click on error record and edit it to the correct value,
select save.
Now update from PSA to target by selecting the option Start update immediately.
3. SID not found for characteristic
Resolution procedure
a. Remove the failed request from data target by making its QM status into red.
b. Load Master data for characteristic using full update.
c. Then reload the transactional data.
4. Error calling number range object
Resolution procedure
Note down the assigned dimension into the cube for 0VAL_TYPE
copy the dimension name
Go to RSRV transaction
Tests in Transaction RSRV -> All Elementary Tests ->Transactional Data then double click on Comparison of Number Range of a Dimension and Maximum DIMID- then click on the right pane in same->Mention the cube name and dimension name, click on enter.
Then click on correct error. It will correct the error.
5. Trfc error
Resolution procedure
Go to SM58
Go to edit->Execute LUW.
Then do refresh in monitor.
Now it will pick the records and the load will get success.
Some times we found that some packets will not get updated even if the extraction is showing as complete.
Do manual update of each packet
6. ALE REMOTE lock
Resolution procedure
This can happen when user or ALEREMOTE is accessing the same table
a. Remove failed request from data target by making its QM status into red.
b. Check into sm12 and delete the lock, usually the BASIS deletes them
c. Reload the package
7. Delta fails
Resolution procedure
R/3->BW
Data is coming from R/3 then make the request technical status red in monitor and remove the request from manage.
go to info package restart the load, then you will get a pop up saying that repeat of last delta click on request again.
Go back to manage and look for the delta type, it will show as Repeat of last delta.
BW->BW(Data mart)
Delta load failed from ODS to cube/any data mart.
Make its technical status as red
Go to manage and remove the failed request by making its QM status as red.
It is updating from ODS, so we have to remove the data mart status in ODS manage, before restarting delta
If you click on data mart status it will pop up a window
Click on delete icon, select YES and then ok.
Now refresh manage the data mart status will get deleted.
If you load now the failed delta will get success. -
What are the frequent data load errors in production support?
what are the frequent data load errors in production support?
It is a long list. Here is some of them.
1. Idoc not arriving from source system.
2. previous processes failed.
3. change run unsucessful or did not run properly and data in master data is messed up.
4. invalid characteristics in the data.
5. Duplicate records found.
and on and on.
Ravi Thotahdri -
What does the xantrex driver error 5 mean and how to solve it?
Dear Experts,
I downloaded a new XANTREX driver and used it to control our new XHR
150-7 power supply. I tried to use the GET STRAT.vi to control the
output of the power supply. The output could be controlled according to
the command input. However, there is always an ERROR 5 message poped
out whenever it ran. The error source seemed to be in the DELAY &
READ.vi.
I would be most grateful if you could tell me how solve this problem at your earliest convenience.
Thanks a lot for your attention and help,
JamesExactly which driver did you downlaod and from where? By "GET STRAT", do you mean one of the Getting Started VIs? Error 5 means "NI-488: Command requires GPIB Controller to be System Controller." Are you using GPIB to control the instrument? If so, what type of board are you using and which version of VISA and NI-488? If the error only occurs on a read, try issuing the query from MAX and see if the error occurs there. In a couple of the Xantrex drivers I looked at, there seemed to be some fixed delays after a write and before a read. You might try increasing those values to see if that makes any difference.
-
Common data load errors in BI 7
Hi , i would appreciate if any one can provide me a list with most common Data load errors effecting both master and transactional data in SAP BI 7 or BW 3.5..
Hi AAL,
There're lots of loading error posts in this forum. This one I guess is good for you:
production support errors
production support issues
Or you can search yourself using key word common load error etc.
Hope above helps.
Regards,
Frank -
Data Loading Error : ToomanyError records.
Hi All,
I got Data Loading error when I am loading from Flat File.
Following is the error message :
Too many error records - update terminated
Error 18 in the update
No SID Found for value '00111805' of Characterstic ZUNIQUEID (Message No 70)
can anybody help in resolving the issue.
Regards,
Chakravarthyhi
Check the format of your charecteristics and key figures .
Check you put data separators in you flat files approriately
In the particular charecteristics ZUNIQUEID ,ensure data is consistent...check the related tables
Assign points if useful
Regards
N Ganesh -
I have been using data loader for large imports and have received two errors that are causing me issues:
The first error is from the log file and is: [main] Oracle Data Loader On Demand Import validation FAILED: String index out of range: -1
The second error is from cmd window when import is in progress: WARNING: Unable to connect to URL: https://secure-ausomxxxx.crmondemand.com/Services/Integration;jsessionid=38dd67911f7fxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx due to java.security.PrivilegedActionExcep
tion: javax.xml.soap.SOAPException: Error parsing envelope: (2, 7110257) Invalid char in text.
What characaters are considered invalid in a csv file?
What does String index out of range: -1 error message mean?
Thanks in advance for your help or suggestions.
Edited by: user572322 on Dec 6, 2010 12:41 PMHi
Have you checked the length of the data with regards to the field type?
That might cause that error.
Thanks,
Mayank -
Data Load error Please respond ASAP
Hi ,
When i am trying to load data for year 07 using rule files its showing an error and aborting the data load
Error Msg " Data Value [2007] Encountered before all dimensions Selected,[5] Records Completed"
Any help greatly appreciated.
ThanksKey here is that 5 records were loaded before failing on the 6th, indicating it's not a header issue on the load rule.
Check the first 5 records and see how the column containing 2007 differs between them and the failing 6th record. Perhaps the 6th record has a null (as indicated eariler) or prehaps 2007 is not the name of the member in the outline.
I have had both issues give similar error results.
J -
Data load error regarding timestamp
Hi All,
I am getting data load error related to time.
I am using 2lis_02_SCN for CNFTM(time stamp) filed
with value "08:00:" need to convert to 08:00:00...for some records and rest of the records are coming with normal 6 digit time.
please send your suggestion as early as possible.
Thanks
RupaHi Rupa,
Try out following sample code inthe transfer rule for the same info object and it should work
lv_len = strlen( str ).
if lv_len = 4.
concatenate str '00' into str.
endif
Regards
Kapadia -
Sap bw 7.3 master data load error
sap bw 7.3 master data load error
erroe: Exception in Substep RulesHi Jayram,
I am assuming that you are getting this error when you are loading data from PSA to IO. If so, the error might be because of
1. Duplicate records
PSA might have duplicate records. But you will be able to load only one record to Master data IO. In DTP Update tab, there is an option for "Handle Duplicate Record Keys" . Just enable this & try to load again.
2. Erroneous records.
Some special reocrds are allowed in PSA where as thye might not be allowed in Master Data/Data Targets like Lower case letters/ some speacial characters etc. If error is because of this, then you might need to correct the data at PSA level & reload the data to Master data. Else get it corrected in source system itself & fetch the data to BW. Or write some code to take care of these special characters.
Hope it helps!
Regards,
Pavan -
hi friends ,
we are geting data load error as; Process 000087 for deterermined fro infoobject DUVTYPE started in STATUS TAB and in DETAILS TAB update(251new/160 chnaged): Errors occured.
what should i know from information and what are the reasons for this load failure and possible rectification methods.
This load is through process chains and aslo a delta load.
Can i delete the request and start the infopackage manually? also will it make my Process chain Green automatically or should i repeat from the subsequent process?
Plz help.
I award points.
regards,
siddarthaHi siddharta,
look in the details of the monitor to see the error. Be very cautious with deltas! They can not be repeated every time. it depends on the datasource! What you can do is delete the failed request from all(!) the data targets meanwhile!
Regards,
Jzergen -
Hi
Data Flow ODS-->Cube (Transformations)
We replaced update rules with transformations.
Fiscal Year Variant is mapped to Fiscal Year Variant
FY Year mapped to FY Year
FY Year/Period Mapped to FY Year/Period
In Transformations we are getting Cal Month & Cal Year/Month from FY Year/Period is routine.
To get the First 4 Chars and last 2 chars from FY Year/Period and to Cal Year/month using a routine
Similaryly Cal Month as well from FY Year/Period using routine.
This is done in older Update rules as well...
When tried to load data...i am gettying the below error
"Fiscal Year Variant X is not maintained for Calendar lear 001"
Please update how to fix this
ThanksNice copy/paste Mtl...
when i post 'please search the forum' this seems not tohelp
when i post links to other posts, often my reply is removed as moderator don't won't to see a link collage
therefor if a answer is available in previous post i copy/paste as for me this is only solution (however next time i'll mention the author)..i do not copy paste within the same thread hoping that the last post will receive the points...
concerning the fact that i might not have red the question correctly...during all the time i have been using this forum i have seen that question is not always the exact problem description...therefor i propose solutions even if on first glance they seem off the case....even more this error will only popup at the moment of checking master data. so if the dso is write optimized, or SID generation is turned off, the error will only show when loading to the cube and can be solved by transferrring the R/3 data. the fact that it concerns a load from dso to cube is then of no meaning.
M. -
ORA-01403- No data found error on Pricing and availabiltiy form
ORA-01403- No data found error on Pricing and availabiltiy form
whenever user click on item availability in Pricing and Availability form ,this issue appears. Can any one let me know the cause.
Thanks
Payal941250 wrote:
Thanks Mahendra,
I have already read this article and accorind to it our instance is already ATP enabled. But still we are facing the error.
Thanks
PayalPlease see if (OEXPRAVA ORA-01403 Item Availability Not Displaying In Price and Availability Form [ID 290251.1]) helps.
Thanks,
Hussein -
Spotlight and search field in Outlook on MacBoon cannot find files as of a certain date. What can be the problem and how to solve?
Reinstall on both.
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it isthree times faster than wireless.
Restore your iPhone to reinstall iOS. Be sure to do this while connected to your computer and iTunes.
Tap Settings > General > Reset > Erase all content and settings. -
HT201210 what is error 409 and how to solve the error
i was trying to restore my iphone but it give an error 409
what does this mean and how to solve itWhy apple technical support will help the apple customer to solve this problem ??????????
the complication of apple products let most of my county's people use SAMSUNG phones
Maybe you are looking for
-
i have the version of itunes the ios 7 update requires but every time i try to update my phone it says i need the itunes version 11.0.5 but i already have it?
-
The .mov file sis downloaded from my Sony camera. It is not altered and plays fine on the Mac mini using QuickTime. It will not play on a Windows 7 unit using the latest version of Quicktime. Why would that be? Why will one version of QuickTime work
-
Business Rule Validation Error
Hello, Please help me I'm finding the this error when I'm validating Business Rule in Admin Services. "Unable to run or validate this rule (Demo2) against the following location: Essbase/Amit-pc/Sample/Basic for user Admin" Rahul
-
Embedding Microsoft Office Documents into a PDF
Hi Everyone, Do any of you know if it's possible to embed Microsoft Word or Excel documents into a PDF as an icon which when clicked will open in the relevant application? Thanks
-
I cant find the serial number to activate my subscription iv paid for?
Iv been a member for a week, logged in and out several times- and my apps ask for a serial number everytime- where do i find the serial number! help!