Motion file missing data after MM export

Hello,
after finishing a project I exported it using Media Manager. When I reopened the newly created project, I noticed that all Motion clips where missing the video layer.
I used Motion to blur out some faces and the blur is still there but I'm missing the video track (its just red checker box).
I fortunately still have the original project to export the clips manually but can someone tell me what I should have done differently, please?

Nada don't think. Motion project files with "embedded" video aren't managed by Media Manager.
Jerry

Similar Messages

  • How do I include Motion files in FCP "media manager" exports?

    All files with a .mtn do not transfer correctly when I use media manager to duplicate a project: I get the red-dotted frame and even when I try to reconnect the frame, once rendered, remains black. I was wondering if there is a way to export Motion files there were created by exporting from FCP and "embedded" in Motion.
    Thank you for the help!

    ~/Titles.localized/Show Effects/Show/Lower 3rd/Lower 3rd.moti“ is the Motion file that is being used.  I was able to replace the file and when I open a project all of the lower thirds are there except they are all missing the names and titles.  I
    I parsed through the .fcpevent file and found the following which seems to set the title in the effect.  Its pointing to an object with an id of 2.  But how do you get the title in the new Motion file to be the same object so that it will fill in correctly??
    <parameter name="Object" id="2" flags="8589938704">
            <parameter name="Text" id="369" flags="8606777344">
                <text>Andrew and Claudia</text>
            </parameter>
            <parameter name="Render Text" id="360" flags="8590000146" default="0" value="0"/>
            <parameter name="Face Camera" id="352" flags="8589934610" default="0" value="0"/>
            <parameter name="Layout Method" id="314" flags="12901744656" default="1" value="1"/>
            <parameter name="Right Margin" id="324" flags="12901679120" default="1024" value="1024"/>
            <parameter name="Top Margin" id="325" flags="12901679120" default="100" value="100"/>
            <parameter name="Path Options" id="329" flags="8589938704">
                <parameter name="Shape Source" id="339" flags="77326254096" default="0" value="0"/>
                <parameter name="Align to Path" id="333" flags="8589934610" default="1" value="1"/>
            </parameter>
        </parameter>

  • Missing data after server restart

    Hi,
    We restarted our MDM server at the OS level last night. Everything seemed okay after the restart. However, when our users came in this morning, they found that some data was missing from a table. We have a Material repository with 3 main tables. Some data which have previously been populated was not appearing in our Products Detail table, the largest of the three. A large number of rows in the table had columns that failed to load with data on the repository auto-start that occured after the server restart. The auto start value in the mds.ini file was set at 300 (5 minutes) as we had seen this iisue happen once before, and thought that may help.
    A stop and restart of the repository corrected the issue. Is there anything we could have done to prevent this? Is it worthwhile to try increasing the auto start delay again? Validating detail data after every server restart is not an effective option.  
    MDM version: 7.1 SP08
    OS: AIX  DB: Oracle 11g
    Thanks!
    Dave

    Hi Dave,
    I meant that when you load repository using Immediate data is loaded from .acl files (accelerator files) in a async manner.
    Whereas when you load by Update Indices new acl files are generated.
    Below men6tioned is a comparision between the 2 ways of laoding repository:
    Load Repository Immediate
    o Loads indexes from accelerator files instead of being regenerated by reading the data them from the DB and creating the index.
    o Automatically builds indexes stored in out-of-date accelerator files.
    o Is usually fast.
     Load Repository with Update Indices
    o Rebuilds all MDM indexes files by reading and indexing data stored in the DB. The results are flushed on disk as accelerator files.
    o Necessary by repository schema changes or if any error occurs.
    o Might take significant amount of time to complete.
    So when you observe some visual data impact in your repository it is good idea to rebuild indexes.
    I guess we cannot schedule this as default behavior is to load by immediate even through the inin parameter.
    as a best practice one can do this by fixing a time frame eg monthly depending on data/schema changes.
    Thanks,
    Ravi

  • Files get corrupted after import-export

    Hi
    After exporting images from HTML DB 2.0 and importing them some of the files are corrupted after import.
    This has happened with one .js file and with one .pdf file.
    All the other (including some PDF-s) are correct.
    The "File Character Set" specified on import is correct and there are no other parameters I can change.
    If I look the contents of corrupted files it seems that another file has been pasted at the end of the original file.
    What could be wrong?

    Hello,
    Any news on this ? I have the same (reproducable) problem with a .js file.
    Uploading works fine, but when I try to download it again, the contents of another file seems to have been appended at the end. The file also doesn't work when I try to include it using #WORKSPACE_IMAGES#...js
    Matthias

  • Audio file missing from MOV when exported as a quicktime movie.

    Using Keynote 9, I imported video into presentation that was edited in iMovie 9.  When I export the presentation to quicktime movie the audio is missing from the video file.  The audio file plays fine in the standard keynote presentation mode. 

    This is STRICTLY a work around!  Official fix will come from Apple as an update more than likely.
    Duplicate item first (File > Duplicate). On newly duplicated project change file association type (File > get info). Under name and extension section take out .key). Close Get Info and save with removing .key.  Double click to open the file (now a compression).  Open uncompressed folder (same name as original file, now shows as a folder).  Now in the Data folder find a .mov file named "Recording" with randomly generated letters and numbers behind it.  Drag .mov file to desktop or any other directory. Open extracted .mov file with QuickTime to verify integrity. Save as audio file only.  Get Info on file again and place .key value at end of file/extension for project. Open project. Under Play menu option delete the recording.   Under Audio inspector drag the .mov of audio only to recording back in. Test play project to see if its accurate.  Export to QuickTime and see if issue is resolved.
    If issue persists:
    Export with corrupted audio as QuickTime.  Separate the audio from video track.  Delete audio.  Import the extracted .mov audio file.  Share > File. Enjoy.

  • Missing Data Value on Export

    I am using FDM v11.1.2.2, and I am receiving an error during the export step. The export message shows that there is no Value for the record. I have set the Data Value for the location as <Entity Currency>, and I am not sure why the Value dimension is missing from dat file that is produced. The adapter is FM11X-G6-A. I have no scripts in the application.
    Has anyone seen this before?
    Line: 2, Error: Invalid cell for Period Jan.
    Actual;2012;Jan;YTD;2891_DIVN;;FFS;[ICP None];[None];OM;LOAD;-182.49
    >>>>>>
    Error Message in Error Log
    ** Begin fdmFM11XG6A Runtime Error Log Entry [2013-01-23-11:54:06] **
    Error:
    Code............10002
    Description.....Data Load Errors.
    Procedure.......clsHPDataManipulation.fDBLoad
    Component.......C:\Oracle\Middleware\EPMSystem11R1\products\FinancialDataQuality\SharedComponents\FM11X-G6-A_1016\AdapterComponents\fdmFM11XG6A\fdmFM11XG6A.dll
    Version.........1116
    Identification:
    User............xxxxxxxx
    Computer Name...XXXXXXXX
    FINANCIAL MANAGEMENT Connection:
    App Name........
    Cluster Name....
    Domain............
    Connect Status.... Connection Open

    That did it, thank you. Should be my last question... if I have 50 locations, would I have to go in and edit each one manually? I tried changing just the parent location, but that didn't work.
    Also, I found this in the latest 11.1.2.2 FDM guide:
    Data Value—An extra dimension that is used only for integration with multi-dimension
    target systems. This dimension is associated with a data load location. When FDM creates
    the load file, the dimension value is entered for every data line that is loaded by the location.
    For example, the Data Value dimension is associated with the Value dimension in Financial
    Management. By default, if no value is entered in this field, for integration with Financial
    Management, the Data Value <Entity Currency> is the default value.
    Message was edited by: ffba8d4a-2fdd-47a4-9925-b9293ba8db38

  • Missing text after pdf export.

    I am having problems exporting to PDF from Publisher 2007.
    I am using Adobe professional 8, Publisher 2007 on Windows Vista 64.
    The files are created and printed to PDF. When I take a look at the PDF there are blocks of text missing. If I re-export the file again, 9 times out of 10 the text will be missing. Periodically everything will work fine with the same document. In the most recent document I am using Helvetica 55 Roman 12pt. All the body text is identical (at least from what I can tell). This exact same document exports to PDF perfectly on a Windows XP SP2 machine using Adobe Professional 8 and Office 2007.
    As far as I can tell, this only occurs in when exporting from Publisher, which leads me to believe that it is an MS problem but I have been unable to find any information about something Publisher specific.
    Thanks in advance for any help. This is frustrating.
    Jason

    I spoke too soon.
    I exported (using the adobe add-in) 8 documents. The first 1, 2, 3, 5, and 7 were fine. Numbers 4, 6, and 8 had problems.
    All these documents were created from the same template. I did the first and all subsequent documents were created by duplicating pages and swapping text. The page numbers vary from 5 to 16. There is no apparent connection with page count as several of the larger ones exported perfectly.
    I don't know if this information is relevant at all. I am hoping that it gives someone an indication of what might be causing this.
    Thanks again,
    Jason

  • Placed PDF missing text after re-exporting to PDF

    I'm using OSX 10.6 with InDesign CS3 504.
    When I place PDFs into an InDesign file, and then PDF that InDesign file, some of the PDFs are missing text.  All text boxes have been made from the same original text box, just modified for content, and shape very slightly.
    The text that is missing is most often white, where it's being used over the top of black frames.  There is one instance of black text over a white frame missing.
    I've tried exporting to .inx, and then re-pdfing.  I've also tried copying text boxes that are 'working' and changing the content, but still the same text boxes are missing their text.
    Any help much appreciated.  Thanks.
    Message was edited by: agreen01

    i already tried exporting to .inx about 3 hours ago.  unfortunately i'm very pressed for time with a meeting in about 1 hour, so i've recreated the problem text boxes.  luckily there were only about 10 of them and it only took 10 mins.
    before that i tried to isolate the problem element, but couldn't find one.  every time i removed something, i still got the problem.  the only time i didn't get the problem was when i had just the text boxes on their own, with none of the other essential page elements.
    thanks for your help, though.

  • Batch Change "Date Modified" to match Exif Data After iPhoto Export

    Among several other posts about similar situations, I have found none that directly and simply resolve this issue.
    My wife imported a bunch of photos into iPhoto directly, but I wanted them in a folder on the hard drive.
    I pulled them out of iPhoto into a folder, then deleted the ones in iPhoto so that I could sort them and reimport.
    I then realized that the photos all now showed the date they were imported into iPhoto as their created/modified dates, which makes it impossible to easily sort them by the date of the pictures.
    I checked the Exif data, and it has preserved the correct creation date event though checking "info" on the pictures shows create date the same as modified the same as iPhoto import.
    Is there an easy way to batch change an entire folder of pictures to change the Created/Modified dates to match the Created date from the Exif data?
    The only other similar posts had answers that reccomend a piece of software that does not seem to actually do this, and one that suggests some sort of confusing script that I don't really understand.
    Please help - I have a bunch of family photos that I really need to fix.

    shootShifter helps to redate and rename complete folders of images based on the EXIF data or Finder dates.
    So it will do batches.
    I also believe that exporting the Original (File -> Export: Kind Original) will make all of this unnecessary.
    I don't like having them only in iPhoto so I organize the originals into folders by choronological event then import them so I have copies outside the iPhoto library to put elsewhere.
    You understand that you're using twice the disk space there, right? And that it's quite unnecessary. All iPhoto does is to put them in folders too. Have you looked inside the iPhoto Library ever?
    Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed. Your photos are in the Masters folder.
    Standard warning: Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things,, deleting them or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
    Regards
    TD

  • Missing metadata after slideshow export

    I love to show some metadata - like a description - within exportet JPGs. That way they are visible on any device used to present the pictures. As far as I found out this is only possible by doing a slideshow export (watermarks unfortunately can not pull information out of the metadata fields). But all the exported JPGs are missing all metadata, so I can not even sort them automatically later in other software solutions.
    Any idea how I could both show the description field within/under the picture and do not loose all metadata information within the exported files?

    Sorry, I misunderstood.
    Looks like you cannot have both metadata in EXIF and metadata as text overlays on the image, without using a third-party plugin.

  • Missing data after removing formula

    Hi All,
    iam writing formula "Missing" for one member so its showing missing for that member its gud
    but
    i remove the formula for that member still its missing its not showing the data for that member how can i get the data for that member with out reloading
    what is the reason any help plz
    Thanks
    Edited by: user8815661 on 10 sept. 2010 02:11

    I'm a bit confused, but here's what I think is going on:
    1) You have a member (Account, Scenario, something?) that has a formula
    2) You have data with that member
    3) You have loaded data to that member but the data never shows up because of #1
    4) You have deleted the formula in #1
    5) Now you want to load data from your source (whatever it is) into this aforementioned member.
    Is that correct?
    How else would you expect to get data into that member without loading it? Is this value something that can be calculated in Essbase? Wouldn't that lead you back to step #1? Otherwise you're going to have to load it. You could write a query that selects just that member, stick it into a load rule, and load it (or do it through Studio, whatever, the concept is the same) or if it's a file, write a load rule that rejects everything but that member, or clear out and reload all the data.
    Or you're going to have to explain it better for me or I'm going to have to drink more coffee. Actually, I'll do the latter regardless -- I need all the help I can get.
    66 questions, 50 unresolved? Would you mind marking your questions as answered, if indeed that is the case. Otherwise anyone coming across your threads won't know their final outcome.
    Regards,
    Cameron Lackpour

  • Acrobat 9 Professional forms missing data after upgrade to Adobe Reader 10

    My principal has a macbook pro with OS 10.6 on it, and Acrobat 9 Professional. One of the Xerox technicians in our district came around and updated Adobe Reader on her computer to AR 10. This caused her computer to lose the license key for Acrobat 9 Professional. Now all the of the data that she had saved in forms done in Acrobat 9 Pro has been lost. When she opens these files, the forms are blank. Is there any help for recovering the data that was lost from these files?

    As long as the tech did not remove Acrobat, it should still be there. I am not that familiar with MACS, but that is the case for Windows. I would suggest that the tech be requested to rectify the issue. It may be that she just needs to open Acrobat and then the file. It may be that a MAC has a file association like the PC, and in that case she needs to set the file association back to Acrobat.
    If she maintains both AA9 and ARX on the machine, she should also update them. It may be an update issue that is causing the data to not be seen. Some versions have had problems with seeing the data unless the cursor is in the field of interest. So is the data really still there or not?
    Hope my limited thoughts about the MAC is of help. I am sure that some MAC folks will be by to give help.

  • Missing Data after extraction

    Hi,
    I have a generic datasource in R3, delivering some 20 plus fields. When I check in RSA3, I get all data, for full extraction or even selective extraction.
    I have replicated and activated the DS in BW. Now when I extract the data in BW for a single document, I get all the information in PSA, but when a full extraction without giving any filters, some of the data is missing in the extraction.
    Seems nothing wrong in R3 and nothing wrong in BW, what else am I misssing

    Hi,
      Check the below.
    1) Remove selections in Info package.
    2) Check the filters in DTP.
    3) Compare the number of records PSA and RSA3 in ECC.
    4) Compare the number of records PSA and data target
    5) If you are missing records from PSA to data  target chck filters in DTP and routines.
    Regards
    Prasad

  • PR05 Missing data after upgrade 4.6C to ECC 6.0

    Hi,
    We have just migrated from 4.6c to 6.0 and after that on tcode PR05 for many employees the list of trips is empty and for others there are some trips available but not all of them. Tried SU53 to see authorization check but everything is ok.
    Does anyone have an idea of what could have happened?
    Thank you,
    Paulo Siqueira

    Hi Christian,
    I had already checked that note. But it's not the case. It was missing the role trip, not only some fields. Anyway, I found out what happened. After the upgrade it changed the settings (F9; last icon on the taskbar); option "Display Trips" must be set to all.
    Best regards,
    Paulo

  • Missing data after updating to 1.3.5.1

    I updated my Palm Pre webOS to 1.3.5.1 and lost ALL my calendar events.  My contacts no longer come up when I attempt to create a new text message.  I also cannot view contacts or pull them up by typing the contact name when I want to make a call. 
    Am I missing something?  How do I get this info back?  How do I sync my contacts with the text and calling applications?
    This is rather frustrating...
    This question was solved.
    View Solution.

    If you would still like for us to attempt to restore your data send me a private message with your Service Request number and I will get your case escalated. It should be a 1-517 number.

Maybe you are looking for