Motion for FCP 3?

Can I run Motion on an eMac from 2002?
Can I run it in FCP 3?
Can I even buy it for my computer?

What Patrick says should in many ways be correct. Look at the old system requirements and run the compatibility checker ( the link is in the page ) to verify: http://docs.info.apple.com/article.html?artnum=93923
PS: Having looked at an Motion 1 trial lurking around, I don't see any difference in system requirements.
PS2: Would you believe that applestore.gr has an old Motion offer? In case it fits you should contact them. That's how it looks (bet you don't get a word out of it-but they have an e-mail link): http://www.applestore.gr/cgi-bin/WebObjects/RWApp.woa/1/wo/Z5k2rCtBxASt2SyTisZVP M/2.0.5.10.0.0.1.2.3.7

Similar Messages

How do I create a drop shadow for fcp x

Does anyone know how to create a drop shadow for use in FCP X. I've tried put can't seem to get this process completed. Yes I'm new to Motion!

Simon Ubsdell has created one in Motion for FCP X.
Download his to see how he did it.
http://forums.creativecow.net/thread/344/2584

Transparency of white gradients: Nesting Motion in FCP

Hi there. If I nest a motion project into FCP that has white gradient transparency and super it onto video, it introduces black into the tranparency. When importing the PSD file that was animated in Motion directly into FCP as a super, the white transparency gradient works perfect. But that defeats the joy of animating elements in Motion for FCP.
I have tried changing the Motion Project background to white transparent (vs default black), but that makes no difference.
Anyone out there knows the solution?

New Discussions ReponsesThe new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
If we use the forums properly they will work well...
Patrick

Is there a good motion tracking plug-in for FCP-X?

The question is in the headline: Is there a good motion tracking plug-in for FCP-X?
You know, like when I want to blur out, say, a license plate number on a moving car.
I know of no plug-ins for FCP-X that will do this. Surely there's one out there.
And since you can't just export a sequence to Motion (like you could in FCP 7), how would one achieve this in FCP-X?

R&B wrote:
… And since you can't just export a sequence to Motion …
instead of selecting a clip or sequence in FCPX, you set the in/out points in the Export/Send it to Compressor dialog.
the exported mov can be tracked in Motion5 …-
aaaand finally re-imported into FCPX.
… not exactly as convenient as in the old FC/p , but the tracker in M5 offers, imho as a hobbyist, superb results.-

How do I set-up my memory amount for max speed for FCP and Motion

Hey all, I have a Dual 2.3 G5 with (8 Gigs) Ram. I'm working with a new client. I want to set up my memory or whatever else to provide MAXIMUM processing power for FCP and MOTION. Does anyone have any recommended settings. I've maxed-our RAM. My card is (ATI Radeon 9600-128MB of VRAM)
Is there a setting in FCP that allows more processing power to be applied to that application ?
Appreciate any replies

Most of FCP's speed in performing functions is directly related to processor speed. The only way to increase performance would be to use a Mac with faster processors. Performance is also related to data throughput, so if you're working with high data rate video formats, a fast RAID and/or SATA (or eSATA) media storage solution would help.
The exception to FCP performance is when rendering/processing FX Plugs; they are dependent on the power of the graphics card.
Motion is mostly dependent on the power of the graphics card.
There is no way that I'm aware of that you can speed up RAM. Having the extra RAM will just mean that you can successfully work with more applications open at the same time.
-DH

How do I partition a disc with a raid card installed for fcp x and motion

Hi,
I have just downloaded fcp x and purchased motion but have found out the drivers for my AJA io HD are not available as yet so decided to revert to FCP 6.5. My system now runs like a dog and then I discovered FCP x and Motion should be installed on a separete partition. I have a Raid card installed on my mac and the application disc disk does not enough space so do not know what I should do. Any help would be welcome.
Noel

Hi Mark spencer4,
The issues I have is No drivers for Aja ioHD so I cant test FCP X to see how it works. When I return to my FCP version 6 it just does not run like it used to and keeps hanging the Aja ioHD so I have to keep refreshing. My motion projects on the FCP timeline now do not open in the old version of motion so I cant round robin as before. My main disc does not have enough space to run FCP X projects and a post on Apple forum said to run FCP X and Motion on a new partition if you still need to use FCP 6. As I have a Raid card with enough space, If I created a partition on it for fcp X and Motion 5 would FCP 6 work properly again.
I could not see how to create a partition on the Raid drive?

How do you install "Twixtor" excellent Slow Motion plug in for FCP

Hi,
I have the Twixtor FxPlug Pro v5.0.1 but can't get to install it properly.
I have seen some posts in the web but for me there is no clue how to install it.
The installer installs it in the root of HD folder, but later they say you have to "move" it where the plug ins for FCP are.... which I don't know....
The only links I found of help, but in my case I could'n solve it, were:
http://www.cinema5d.com/viewtopic.php?f=24&t=21416&start=0&st=0&sk=t&sd=a
http://discussions.apple.com/message.jspa?messageID=3188319
Any one can help with this? THANKS!

installation instructions are all on there web site:
[plugin installation|http://www.geniusdv.com/newsand_tutorials/2008/01/where_to_put_plug_ins_in_final_cutpro.php]

DVD Footage for FCP Edit - how to tell if NTSC or PAL?!

Hi all, apologies if this seems like a stupid request but I have a job at the moment calling for me to extract footage from a DVD, edit in FCP, add a few bits from Motion etc., but I can't work out if the DVD is NTSC or PAL!
I intend to extract the video (no issues with copyright) via DVDxDVPro but am unsure if the DVD has been encoded in NTSC or PAL. The footage it contains is from both the States (NTSC) and South Africa (PAL) so how do I tell? I don't want to go through a standards conversion if I can help it.
I am keen to try to retain as much quality as possible (client can't provide tape) so also any thougts on the best output from DVDxDVPRo for FCP editing?
Thanks all,
Best wishes
Michael

Hi Thomas, that's it!
Thanks for this - it clearly shows the TV standard and the resolution plus 4:3 etc., so everything I needed for confirmation.
Glad I cheked because it was in Pal - thought the conversion in DVDxDVPro looked a bit ropey.
This realy baffled me - seemed so simple but couldn't find a way to tell the standard. Learn something everyday...
I am using DVCPro for export from DVDxDVPro - anyone thoughts on a better option?
Thanks again for the answer - and so quick on a Sunday too!
Kind regards
Michael

Smooth Scrolling Credits for FCP !#$#

To start, I am creating scrolling credits from scratch in Motion 2 to import into my NTSC-DV FCP5 session.
I had accomplished beautiful scrolling credits in Motion to FCP about 6 months ago and cannot for the life of me produce good looking scrolling credits again! I have gone through this forum and there are about 100 different ideas out there...export using the animation codec with "render fields" selected, simply import the Motion session into FCP and render it, use large fonts, use the "scroll up" behavior, use keyframing... I have even tried After Effects which was WAY easier than Motion but produced similar fluttering effects.
Any way I try to do it, the scrolling text always comes out in FCP after rendering (and viewing on an external monitor) with the all too common jagged scroll...like the letters are fluttering in between fields as they scroll up..
My latest atempt in Motion to create this scrolling text consists of this:
1) Open an NTSCDV session in Motion
2) Using the text tool I write in my credits in the "Inspector" under the "text" tab
3) I then appply the "scroll up" behavior to the text from the "Add Behavior/Text Animation" dropdown menu at the top of the screen.
4) The record light below the canvas is on, I goto the newly added "Scroll Up" behavior in the "Inspector" under the "Behaviors" tab and there is a keyframe already added at the beginning of the "Scroll Up" layer in the timeline. I move the "Position Offset" slider down so the beginning (top) of the text is right below the bottom of the screen.
5) I then move to the end of the "Scroll Up" layer in the timeline (which is 30 seconds long BTW), add another keyframe in the "Scroll Up" layer and slide the "Position Offset" slider so that my text has just disappeared at the top of my screen.
6) I drag the cursor through the 30 second roll in the timeline verifying that it scrolls up the way I want.
7) I ensure the project properties are set correctly before I save. This includes making sure the field order is set to "Lower" in the "General" tab, and in the "Render Settings" tab making sure the output antialiasing method is set to "Best" and that "Use dithering" IS checked. In the Motion Blur setting the samples are set to "8" and the shutter angle is set to 360.
8) I then save the project, import the project file into my FCP NTSCDV session, drag it to the timeline, render it, and playback to an external monitor.
Possible Problems:
1) I am thinking that maybe the text is scrolling up too slow and it is impossible to get clean text without the jagged/fluttering effect. As when I shorten the scroll to 20 seconds there is less of a fluttering effect (but it is impossible to read the text as it is scrolling up so fast)
2) There is some "Project Property" setting in Motion that I have messed up.
3) I should not be using the scroll up feature with keyframing but perhaps just keyframing the actual text itself to move up? (although I have tried this with worse results)
I have wasted hours trying different routes, reading the manual, searching this forum, to no avail. Who has the magic recipe I am looking for? Please help.
Dual 2 Gig G5, 4GB RAM, 2 TB HD Mac OS X (10.4.7) Using SATA drives for all editing apps
Dual 2 Gig G5, 2GB RAM, 1 TB HD

Bryan,
I attempted to adjust the white level, the field order, but don't think ever got to messing around with FCP's processing settings...I am actually encoding the film right now as I was under the gun and actually found the "scroll" plugin in FCP to work just as good if not better than Motion without any tweaking so had to roll wth that. I will attempt to tweak the Motion file again though as I cannot bear sub-par credits. Will also email you the Motion file if you don't mind.

Please help me configure a new 8core for FCP

PLEASE HELP A PC GUY MOVE OVER...
I need to configure a new 8-core for FCP mainly. I need to keep the expense reasonable so dont want to spend extra $$$ if i dont have to.
I edit files from many different camera's these days. Mostly weddings & demos.
I want to go with an 8 core either Two 2.26GHz, OR 2.66GHz? Is the 2.2 fast enough with FCP?
How much ram do i need?
Do I need to stripe 2 sata drives together for the video?
Which video card?
Can you recommend any other software/hardware that will help me?
Here is a link to apples spec page:
http://www.apple.com/macpro/specs.html
THANKS

sarecco wrote:
PLEASE HELP A PC GUY MOVE OVER...
Welcome to the family. if you are not familiar with the Macintosh operating system, get yourself a book.
sarecco wrote:
I want to go with an 8 core either Two 2.26GHz, OR 2.66GHz? Is the 2.2 fast enough with FCP?
Either will work fine.
sarecco wrote:
How much ram do i need?
As much as you want but 8G will be adequate. More might not help significantly.
sarecco wrote:
Do I need to stripe 2 sata drives together for the video?
Depends on the video you're trying to use or if you want to do 9 camera multiclips. Maybe.
sarecco wrote:
Which video card?
The stock 4870 is the gold standard for Motion; the current rev of FCP does not care much about the GPU but we are hoping future revs will use the card directly.
sarecco wrote:
Can you recommend any other software/hardware that will help me?
Umm, withotu knowing what you need to do, of course not.
sarecco wrote:
THANKS
No sweat, ignore those other guys. We see this post about once a week around here so you can easily research it on the forum. Strongly urge you to locate your local Macintosh user group.
bogiesan

Is it possible to create DVD Templates with Motion for burning Blue Ray DVDs from Final Cut Pro X?

Is it possible to create DVD Templates with Motion for burning Blue Ray DVDs from Final Cut Pro X?

As far as I know, motion templates can only be used with DVD Studio Pro. FCP X only lets you add a background image to the DVD menu.

IMac vs Powermac for FCP

I am debating between an iMac and PowerMac for FCP editing. I am primarily a shooter but would like to offer editing to clients as well. Don't anticipate anything to graphics or effects intensive. For fairly simple editing does the PowerMac have a huge ($1500) advantage over the top of the line iMac?

iMac:
DV, HDV, DVCPRO HD (possibly) and maybe AVCHD only. Those are the ONLY formats you can edit. I say possibly with DVCPRO HD because the ONLY drives you can use on an iMac are firewire drives. Those are fine for DVCPRO HD (Firewire 800 required), but only for working with P2 DVCPRO HD...nothing from tape. You only have one firewire bus, so capturing using that bus for the camera, AND for the drive is sketchy. Will work most of the time, but not all of the time. Forget Uncompressed SD or HD...not gonna work. The ONLY thing you can upgrade is the RAM...that's it. So Motion will work fine, but not optimally with the graphics card already in place.
Mac Pro: great expandibility
YOu can install different graphics cards, install capture cards for working with uncompressed HD and SD...and can install eSATA cards for working with faster drives. It comes with 4 internal drive slots, three empty, so that you can install fast drives internally that will work with uncompressed SD and DVCPRO HD and ProRes (ProRes on the iMac will be iffy).
Mac Pro is a professional machine, and iMac is a consumer machine. If you work with DV and HDV only, and only need firewire drives, it should be fine. But that's about all you can do with it.
Shane

Plugging camera in G5 via firewire showing up in Motion or FCP

I have a camera that I would like to plug into Motion or Final Cut Pro via the Firewire plug in my G5. Is it possible to have this live feed show up in Motion or FCP? I would also like to know if I could put a Green background in back of a subject as it's being fed into Motion or FCp to use a Green Screen?
Thanks in advance

Motion won't capture for you - FCP will. Neither is a live keyer... Although the talented Peter Wiggins has a plugin that will bring live iSight into the timeline, so I suppose you could use that to key with - I haven't tried it yet... See this thread:
http://discussions.apple.com/message.jspa?messageID=3954467#3954467
for a link.
Patrick

Slow Motion Issues FCP (not PAL issue)

Hi,
I have researched this, and it seems it is a common problem, with many contradictory answers. I have FCP NTSC, and am uploading HDV. When I slow it down, it becomes jittery and choppy. I hear this was an issue in the PAL version, but it seems to be an issue with my editing as well. We shot it in 60i by the way. Unfortunately I don't have any other associated programs, just FCP 5 (so no ProRes, though I would like to get my hands on it). Anyhoo, some good input is greatly appreciated. Thanks!

Bare in mind that you are trying to make less frames persist over a longer duration. When you do a slow motion adjustment, you have to duplicate frames, which makes your footage look steppy. I have found that anything more than about 75% of the original speed looks quite choppy. Frame blending will cover a little bit, but when you look at overcranked footage and compare the two, you can really see the difference. If you use Shake or Motion for the slow-mo, you can utilize the optical reflow machine which will create interpolated frames to help with the missing information.

Mac Pro 4870, 8800, 3870 for FCP?

Hi,
I was looking at getting a 4870 for my Mac Pro.
I want the best performance for FCP - rendering, Color, exporting with compressor etc...
It seems the 4870 is the fastest but then I was wondering if the 8800 under the upcoming new os release would be better?
Can I use 2x 8800 in my machine and would this be faster?
Thanks!

Hi,
Thanks for the reply about 2 cards - I will rule that out.
According to this:
http://www.barefeats.com/nehal06.html
the 8800 is fastest but I am not so interested in Motion im more interesting in rendering speeds in FCP and Compressor work.
http://www.barefeats.com/nehal05.html
this shows that the 4870 is clearly faster but i don't play games...
Any help would be welcome. Just want the fastest card for the job!

Motion for FCP 3?

Similar Messages

Maybe you are looking for