Mountain Lion problem with CAF sound files

I have various sound files in a Cocoa game under OSX with OpenAL and now with Mountain Lion all the small CAF files (5kb or less) do not play. Al the other larger CAF files play as normal. All the files load with no errors.
Does anyone have any thoughts on what might be causing this? Anyone else seen problems with sound files?

This is how it looks like for me. This accours on every Boot Up.

Similar Messages

Mountain Lion problems with Mail Signatures, Pages, Numbers, Keynote - This quick fix solved all my problems with these. Pages etc wouldn't launch and needed to be force quitted. Mail signature changes wouldn't save.

The solution was simple in my case. I don't know why it worked and it may have been entirely coincidental but its worth a try.
Close all applications and restart Mountain Lion.
Log in as Guest. I opened Pages at this point but I don't know if that's required.
Log out and then back in as your normal user.
Pages, Numbers and Keynote now were fine for me and Mail signature changes were saved and available for later use.
For those trying to edit the signatures to get their old ones back - I just found an old sent mail and copied the signature there into the newly created one via the normal preferences. No need for opening .mailsignature files and editing them. This included various colours, sizes, an image and a link with no problems.
I hope this helps anyone having some of these problems.

The solution was simple in my case. I don't know why it worked and it may have been entirely coincidental but its worth a try.
Close all applications and restart Mountain Lion.
Log in as Guest. I opened Pages at this point but I don't know if that's required.
Log out and then back in as your normal user.
Pages, Numbers and Keynote now were fine for me and Mail signature changes were saved and available for later use.
For those trying to edit the signatures to get their old ones back - I just found an old sent mail and copied the signature there into the newly created one via the normal preferences. No need for opening .mailsignature files and editing them. This included various colours, sizes, an image and a link with no problems.
I hope this helps anyone having some of these problems.

Mountain Lion: problem with Time Machine directories and spotlight indexing

I'm using a fresh install of 10.8 Mountain Lion on a 2011 MBP. It's a work laptop with many ASCII files containing numerical data (floating point numbers), with varying file extensions. Some of the files are multi-gig, some are only a few hundred K, and there are tens of thousands of them. Roughly 500G of numerical data.
I can disable spotlight from indexing certain subdirectories of my home directory on the local drive. However, when using Time Machine to backup, I seem to be entirely unable to prevent spotlight from attemping to fully index the external drive (Time Machine volume). I actually let spotlight run for over 36 hours this weekend in a futile attempt for it to finish indexing the TM volume. The /.Spotlight-V100 index on the external drive is roughly 100G and continuously written and overwritten. /var/log/system.log had various "Merging failed" messages for temp spotlight files. I deleted the index, let spotlight run again overnight, but it did not finish indexing. "sudo fs_usage -f filesys mds mdworker mdimport mdworker32 | grep open" showed spotlight slowly chugging through the thousands of numerical files.
I believe the problem is related to this old report from someone who noticed a leopard -> snow leopard change:
http://hintsforums.macworld.com/showthread.php?t=106703
http://forums.cnet.com/7723-6126_102-366184/snow-leopard-10-6-spotlight-indexing -and-disk-usage/
However, I don't see an easy solution. In ML, if you drag the TM volume to the spotlight privacy list it gives you a message about how you can't disable indexing of TM volumes because it's essential for TM. I have not yet tried to manually put in some kind of .metadata_never_index file in the relevant TM volume directories (I am not sure if that will do anything, or perhaps break TM backups), but that's one possible next step.
Anyone have ideas on how I can have my TM backups work but the spotlight indexing of all these data files (their subdirectories) disabled? I'm not specifically TRYING to back up those data files with TM (they're duplicated elsewhere), they're just on the same machine as a bunch of other stuff I need backed up via TM. Apple has a disaster on their hands for anyone trying to backup a machine which also has large data sets.

I'm not aware of any avenue to tell spotlight to not index all or part of a backup.
However, the indexing should work, even if takes a long time.
I don't think this is a new issue and has been part of TM from the start.
Realistically, it may be time to consider whether TM is the best choice for these data files?
Are they very volatile do they change frequently both as to content of individual files and total set of files?
If not, then a clone or syncing type of backup might be better suited for these files.
I do not back up all my files via time machine. I keep photographs and music outside of Time Machine. to be sure they are backed up but via clones.
To show why this might the best take photographs. My photographs are basically immutable once they enter the system, but I may come back with 5000 images from a trip and whittle that down to a few hundred eventually. This would cause a lot of files to be saved in TM that are no longer wanted, - but are not easy to remove formthe backup. while the ones I want haven't changed. TM is not geared to make handling that easily.
As a further aside, ideally one should back everything of value up twice via 2 different means.
I've had backup drives fail.I've had TM logically fail (disk is fine -TM internal data structures bad).

Downloading Mountain Lion - problems with slow DSL

Since we live in a rural area, my friends (who have a new iMac) are having problems downloading the Mountain Lion file.They are on the end of a DSL line feed and get a weak signal. Can I download the file on my computer and then install the file on their computer? They could log into my computer with their Apple ID to down the file. I am concerned an IP address is imbedded in the download and would cause problems. Thanks for any information.

Provided they use their account this will work. The download will finish and present a button to install, just quit at this point. Go to Applications and you will find the installer, copy it to a removable drive and then your friends can install it on their machine.
It looks like this, and it is 4.37GB in size.

Mountain Lion problems with Adobe?

Since changing to Mountain Lion I cannot import jpeg and RAW files into Lightroom4. Anyone else had the same issues? Adobe is not very helpful, but many people have reported similar problems with Lightroom4 and CS4.

You should post here:
http://helpx.adobe.com/support.html

Mountain Lion - Problems with Dynacord Powermate 1600-3

Hey!
I upgraded Lion to Mountain Lion, but that wasn't a nice move. I'm working with Logic Pro 9, and my audio interface when i record is the Dynacord Powermate 1600-3 mixer. When i open Logic and go to preferences->audio and click on output device, the only option i can choose is "built-in output". When i had Lion on my Mac, i was able to choose "Dynacord Audio Interface" in both the input device and the output device. And there wasn't any problems with that.
Hope there are some help to find!

1. Jeg brugte det indbyggede audio interface i mixeren, altså USB udgangen. Ja, det er den eneste mulighed, hvis du vil køre mixeren direkte ind i computeren.
2. Hvis du mener med hensyn til hvor meget lyd man sender ind i mixeren fra de forskellige 4 tracks, er det aux 1, aux 2, mon 1 og mon 2 som er input 1,2,3 og 4 inde i Logic. På hver kanal sidder der knapper til at sende lyd til aux 1, aux 2, mon 1 og mon 2.
Et eksempel: Hvis tommerne er på track 5,6 og 7 vælger man hvilken en af de fire "master-output" kanaler, man vil sende dem til. Hvis man så vælger aux 1, sender man på hver af de enkelte tomtracks, det lyd man vil have ind i mixeren, ved at dreje på aux 1 knappen. Et tip, stil de fire "master-outputs", altså aux 1,2 og mon 1,2 på det samme, og instil på hver enkelt track, hvor meget lyd du vil have ind i pc'en, det må bare ikke peake.
De kanaler som hedder USB 1-2 og USB 3-4, virkede for mig som monitor kanaler, altså hvor man lyd man vil have ud i de højtalere man ny tilkobler mixeren.
3. Når man skal indspille skal man blot bruge USB-kablet. Hvis du tænker på hver kanal, er det lige fedt, om du bruger jack eller mic stik. Jeg bruger kun mic stik, da alle mine trommemikrofoner er med XLR-stik. Men jeg har også indspillet en guitar, der bruger jack-stik. Man gør så følgende: Når man har indstillet gain, og eq sender man lyden til f.eks. aux 1. Man skruger godt op for aux 1 kanalen, og justerer på selve guitarkanalen, hvor meget lyd som skal ind. Derefter vælger man inputtet i Logic, det kan være 1,2,3 eller 4. Slår record til i Logic, og indspiller.
4. Der har du så vidt jeg kan forstå misforstået det. Man kan i menuen vælge om det skal være live eller studio. Hvis du vælger live, er dine "master-outputs" kanaler aux 1,2 og selve masteroutput-kanalerne til speakere. Du skal vælge studio, for så bliver dine masteroutputs aux 1,2 og mon 1,2 og så kan du sende lyd fra hver kanal til dem. Det kan man ikke ved live, så vidt jeg ved.
Grunden til at det hedder live og studio er følgende:
Når man indspiller live, til f.eks. en koncert, bruger man masteroutputtet til højtalerne, og så bliver det optaget i pc'en også, samtidig med at det kommer ud i speakerne.
Studio giver bedre kontrol, da man har mon 1,2 og aux 1,2 og kan sende lyd fra hver enkelt kanal til outputsne.
Håber det hjalp, det var alt hvad jeg ved, kan ikke svare på mere
Det skal lige siges, at jeg kun er 15 år gammel.
Og hey, gå ind på youtube og søg Mads Skov Hansen. Der kommer to videoer frem, trommerne er optaget med en Dynacord Powermate mixer. Del gerne mit drum cover, der har jeg dog brugt et lydkort, som giver meget mere kontrol over hver kanal, da man har mulighed for eq, compressore og effekter inde Logic. Hvor man på Dynacorded kun har 4 tracks, med eksempelvis alle tommerne på samme kanal f.eks. aux 1, og så kan man ikke nørde på hver tom, der skal man lave fed lyd, inden man indspiller.
Venlig hilsen
Mads

Mountain Lion : Problem with Graphic on Macbook 13"

I recently updated to Mountain Lion, and it seems like the graphics are glitching big-time, to the point where the computer becomes unusable and i have to restart... I tried a 'clean' install (formatting and usb-install) but the but the problem persists.
the solution with gfxCardStatus doesn't work with macbook 13" white (mid-2010)
Thanks for your help !

While we all have MacBooks in this forum most of us don’t run Mountain Lion. There's a Mountain Lion Support Community where everybody has Mountain Lion. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/mac_os/os_x_mountain_lion

Mountain Lion problem with HD camera of the Macbook Air

after upgrading to Lion Mountain (10.8 and also 10.8.1) I have a lot of problems with the web-cam on my macbook air (mid 2012), sometimes it's not recognized and tells me that there is no web-cam connected, it also happens to others?
after the restart compiuter it's recognizes and works, but after a while i have the same problem again...

Hi,
I would try a PRAM reset.
Shut down the computer.
Restart it holding down Apple/CMD ( or ⌘)+ALT( ⌥)+P+R Keys until you have heard three Start Up Bongs.
8:33 PM Friday; September 14, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Mountain lion - problem with the graphics.

mountain lion after installation I have a problem with the graphics.

This is how it looks like for me. This accours on every Boot Up.

Mountain Lion problem with iTunes over network

I connect to my iTunes to watch movies over my Airport network. A movie will play for about 20 min then loose connection. I have to go to my host iMac with Mountain Lion and restart iTunes then reconnect on my mac mini downstairs which is running Leopard. A real pain in the bu##.
It appears to be shutting down my network connection for some reason. Is anyone else having this problem? Does anyone know what to do?
I will watch a movie using my appleTV and see if it does the same thing. Then I will know if it is realted to my iMac and not compatability with Leopard.

ok, I watched a movie on my AppleTV without interuption so it must be a conflict between my Leopard on the mac mini and Mountain Lion on my iMac.

Mountain Lion problems with FaceTime

Facetime says (Null) on Imac when calling from ipad 2. When Calling from iphone to mac-no problem. This only started happening after Mountain Lion was installed.

it is like when I using facetime the app close and a crash message appears

Mail 6.0 in Mountain Lion - Problem with Folders

Since loading mountain lion and using Mail 6.0 I can no longer click and drag emails into email folders on my iMac. The email drags but then 'shimmers' over the folder and won't drop into the folder. Does anyone have a solution?

Yes, when I let go of the message it just snaps back to where it was. I can perform this operation multiple times successively using the same email and folder, and the email always snaps back. I do not know if the drag/drop bug you mention is at work here, but it seems to be connected.
The normal behaviour you describe is not happening. The 'shimmer' I describe is that a border appears around the folder and flashes on and off very rapidly for maybe half a second and then disappears; let go, and the email snaps back to where it was.
Any suggestions?

Mountain Lion problems with Logic Plug-Ins

I have just installed the new Mountain Lion, and now my Logic Pro 9 cannot create any more audio or software instrument tracks. I think it has messed up the plug-ins. What should I do to restore my original Logic Pro 9?

Have you downloaded the latest update?:
http://support.apple.com/downloads/#logicpro

Hi! I´m having problems with showing video files in Qlab on my Macbook Air. A sound/video technician told me to "blow out" my Mac. Was told to use cmd+ r when restarting. Is this the right way?

Hi! I´m having problems with showing video files in Qlab on my Macbook Air. It started suddenly. Consulted a sound/video technician who told me to "blow out" my Mac. Was told to use cmd+r when restarting. Is this the right way to clean up my Mac? And is it likely that some kind of bug is causing problems for Qlab to show video files? I´ve already tried with a bunch of different video files and sometimes Qlab plays them and sometimes not. I need the Qlab playlist for a theatre show and only have a week until showtime so starting to really worry. Is there anyone out there who can help?

Your Mac runs maintenance in the background for you.
Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
No idea why that was suggested.
You may have a third party video player installed that's causing an incompatibility issue.
Check these folders:
/Library/Internet Plug-Ins/
/Library/Input Methods/
/Library/InputManagers/
/Library/ScriptingAdditions
~/Library/Internet Plug-Ins/
~/Library/Input Methods/
~/Library/InputManagers/
~/Library/ScriptingAdditions
The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library.

I'm having trouble with my iMessages registration. Has anyone had any problems after they downloaded the mountain lion King with that iMessages because mine is not linking to the computer and my phone

Is anyone else having trouble after thy downloaded Mountain lion x with iMessages mine isnt linking to my computer because it keeps saying i have a registration error. Has anyone else had this problem or know how to fix it

HI,
People who have had computer that has had the Logic/motherboard replaced during repair or refurbishment that has not has the Mac Serial Number Flashed to the board have found that iMessage in particular have not been able to "register".
A current purchase of Mountain Lion will tend to give you the latest version which as of Thursday (12 th Mar) is OS X 10.8.3
You can use System Information to find if the Serial Number is there as it appears under the Hardware section.
If it is missing you need to get to an Apple Store or Apple Authorised Service Provider who can flash the info to the board.
10:46 PM Saturday; March 16, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Mountain Lion problem with CAF sound files

Similar Messages

Maybe you are looking for