Mouse Over Graphs and Legend

Could this feature be included in next release?
Allow to select separate mouse over values from the legend. If I have long definitions for the bars in a graph - I do not want to display these same bars in the legend (there isn't room) I would rather display numbers in the legend which refer to the bars and then have the longer text shown only when I mouse over the bars.
Right now the legend shows the same text as the Mouse Over Values. If I turn off the legend and only have the Mouse over Bars, then I can't use the Enable Hide/Show Chart Series at run-time feature - so I need to have both - the legend and the mouse over values.
Thank you

Hi Marya,
You can submit an Enhancement Request on the below URL:
https://ideas.sap.com/index.jspa
Thanks,
Amit

Similar Messages

Interactive PDF with mouse-overs was created in Illustrator, now pauses and flashes when opened in Acrobat

I have created an interactive PDF using Illustrator that has mouse-overs. When i export the file and then open it in Acrobat there is odd pausing on teh image bewteen mousing over it and the text callout that shold then display. Did I export or save incorrectly?

Thank you for both responses! I'm impressed with the fact that you're reading my post.
I'm new to tech matters with Adobe/PDF/Nitro tho I've been using them for several years.
The original file was created by an agency and given to independent contractor to use. I don't know which program they used to create the form. And I don't know what XFA or LiveCycle Designer means because I'm not technically sophisticated unfortunately.
I used Nitro 6 to populate the data and have a number of forms already filled out, which I periodically open and modify and resubmit. But Nitro 6 is acting sick, despite reinstalling several times. I'm attempting to see if it's worth transitioning to Adobe Acrobat, i.e., can I reopen the forms I've populated and continue to work with them. I like some of the Adobe features for other purposes (e.g., OCR).
Any help in determining how to open the form while keeping the data?

Specific region mouse over effect(Button 1 fades out and Button 2 fades in).

Dear All -
I am new to Flash CS5 and building Flash navigation bar with buttons on it.
Below is my problem description that I want to solve with your help.
I have a rectangular bar and placed one small button(Button 1) on this bar. Also, I have similar button(Button 2) with some graphics on it which is of similar size as to previous Button 1.
Button 1 - Without graphic.
Button 2 - With graphic on it.
What I want is that, whenever mouse is taken over Button 1 placed on the rectangular bar, it should fade out and simultaneously Button 2 should fade in. I want only button region to be sensitive to this mouse over effect and not the complete rectangular bar.
Kindly let me know how can I define the specific region(button region only) to be sensitive to mouse over effect in flash, and how to place Button 1 and Button 2 in layers so that both are at the same positition(so that there is no displacement of button detected).
Thank You,
Saurabh Khanna.

Hello -
Thank you for the reply. Button 1 does not have glowing effect, whereas Button 2 has a glowing effect. So what I wanted is that when initially Button 1 is loaded during page load, when I mouse over Button 1, Button 1 would fade out and Button 2 sitting behind Button 1 would automatically look like fade in(due to gradual fad out of Button 1 on top of Button 2).
I could do this now, and would like to Thank you for your reply.
I did this by creating movie clip on "Over" event of Button 1 and changing its Alpha property. But now what I want is how to gradually fade out, means when I remove my mouse from over button, then Button 2 should fade out gradually which will automatically make Button 1 fade in gradually.
I could not find the "Out" event just like we have "Over" event for Button, so I assume this can only be done using ActionScript somehow.
Let me know if I am going correct with my assumption, and possibly if you could help me achieve the remaining half(fading out gradually when mouse is removed from the button).
Thank You once again for your reply.
Thank You,
Saurabh Khanna.

Mouse over and Mouse Click function

Hi,
I have to add a mouse over event and mouse click event in my rectangles that I draw while taking the values from an input file. Now since I am taking rectangle height and width from the input text file as well I also want to take a text value to be shown while moving a mouse over a particular rectangle from my input file. Also when he clicks on that rectangle the height and width of that particular rectangle only should be displayed (re-adjusted).
Like suppose my input file has 3 fields:-
Height   Width Test_To_Show
10          23         Hello
20          44         ByeNow When my paint component draws these 2 rectangles and a user moves his mouse over the rectangle he should see text message attached to it:- Like for first row 10, 23 he should see "Hello". In this case when he clicks on this rectangle the picture should read just to show only 10 and 20 as height and width. Now the problem is I am confused where to add the mouse and mouse click event function.
Some of my code looks like this in paintcomponent method:-
        for(int i=0; i<myobject.size(); i++){
            Coloring fc = myobject.get(i);
            GradientPaint gpi = new GradientPaint(0, 0,c.getColor() , 0, 20, Color.white, true);
            g2d.setPaint(gpi);
            g2d.drawRect(fc.value1, 29, fc.mywidth, 83);
            g2d.fillRect(fc.value1, 29, fc.mywidth, 83);
                                            }Where should I attach the mouse event to g2d object / fc / myobject ? I am not sure since I am using mouseover function for the first time.
Thanks

I am planning to add these 2 in my paint component method
            fc.addMouseMotionListener(this);
            fc.addMouseListener(this);and then create 2 functions like this :-
      public void mouseEntered(MouseEvent e) {
              //I will be reading from a file and then pass the string that I want to show as text while mouse over
               String s = // takes value from the inpuf file.
                  fc.setText(s);
public void mouseClicked(MouseEvent e) {
             //same way reading from the file ... Not sure how I will do this one
             }Would it be the correct way to do it ? I am doing mouse over functions for the first time so donno much about there usage.
Thanks

Creating mouse-overs in iWeb

Hey there,
I'm rather new to iWeb, so if this answer is obvious to most of you out there forgive me. I've been experimenting with iWeb '08, enjoying it immensely, but I'm trying to figure out a way to create a mouse-over in iWeb.
This is the general idea of what I'm trying to accomplish (the picture is my friend's site which I'm renovating)
[IMG]http://i7.photobucket.com/albums/y290/Shadek9/Picture4.png[/IMG]
Basically just mouse over service, and get links to multiple other pages or portions of pages in a site.
Thanks for your help

Solcry wrote:
...is there a way to modify the navigation links to be a drop down menu?
Not natively in iWeb. I haven't tried the following free JavaScript generator, but perhaps it will work for you:
http://javascript.internet.com/generators/drop-down-menu.html
And they have other generators:
http://javascript.internet.com/generators/

How to show the legend names on the graph on mouse over ?

I would like to show the legend names on mouse over (not the x axis or y axis name together ) on Mouse over . Is that possible ?

Welcome to the Apple Support Communities
To show the hard disk on the desktop, go to the Finder menu (on the menu bar) > Preferences > General, and mark "Hard disks". Also, you can show external disks, network drives, discs... if you want

Xcelcius 2008 - Dual Axis Graph Mouse Over Display

I am working on a dual-axis graph where one value is a percentage and another is numeric. I am having an issue where I cannot format the hovers into multiple formats (i.e. one as numeric, the other as a percentage). In the graph properties I only see one property to modify Mouse-Over Values, but I need to modify it for each axis.
Thanks ahead of time.

Hi Diney,
I Have to show all the projects per client requirement, I want to remove the legends(which I already did), and instead show the project name only when the mouse is rolled over in the graph. Is it possible?
Thanks for your time and help.

Line chart and Bar char Mouse Over

Hi All,
I have to plot Bar chart with Material is on X-axis and Cost is on Y-axis, I am able to do that.
But when mouse put over the bar in the chart it should be showing the Material Description .
Could you please any one help me.
Material   Material Desc    Cost($)
10000      xxxxxxxxx       10,000
10001     xxxxxyyyyy      10,000
Thanks
Muvva

Hi,
I think, there is no direct solution.
There is a workaround.
1. Disable mouse over Test.
2. Enable drildown on mouse over and use that index to identify column which user selected.
3. Display Material Description and Value using label components.
But the issue is ,we have to identify a placeholder in graph to display these values.
Regards
Baby

Change mouse cursor over graph cursor.

Is there a way to change the mouse cursor as it moves over graph cursors when using trackmode TrackDragCursor? To indicate that you can position the cursor.

You could accomplish this with the graph's CursorMouseMove event. For example, create a new project with the NI Measurement Studio AppWizard and follow these steps:
Add a graph to the dialog. Right-click on the graph in the dialog editor, click "Class Wizard ...", click the Member Variables tab and add a member variable for the graph called m_graph. Click OK.
Right-click on the graph in the dialog editor and click on "Events ...". Add an event handler for CursorMouseMove called OnCursorMouseMove and add an event handler for PlotAreaMouseMove called OnPlotAreaMouseMove. Click OK.
Go to the header file for your dialog class and add this to the bottom of the class declaration:
private:
bool m_cursorChanged;
HCURSOR m_defaultCursor;
HCURSOR m_crossCursor;
Go to the source file for your dialog class and add this to the end of the
OnInitDialog method:
m_graph.TrackMode = CNiGraph::TrackAllEvents;
m_graph.Cursors.Add();
m_cursorChanged = false;
m_defaultCursor = ::LoadCursor(NULL, IDC_ARROW);
m_crossCursor = ::LoadCursor(NULL, IDC_CROSS);
Add this to your CursorMouseMove event hander:
if (!m_cursorChanged)
:etCursor(m_crossCursor);
m_cursorChanged = false;
Add this to your PlotAreaMouseMove event handler:
if (m_cursorChanged)
:etCursor(m_defaultCursor);
m_cursorChanged = true;
Run the application. You should see that the mouse cursor changes to a cross when you mouse over the cursor.
Hope this helps.
- Elton

Mouse over Legend

In a pie chart, when the values are very small and all values do not post to a slice of the chart, is it possible to mouse over the legend to see values?

You can achieve this effect using several other components. You could put a transparent toggle button component over each of the items in the legend. Set the buttons to insert on mouse over. Have text boxes that read from corresponding values dynamically display based upon the toggle button insert cells. Hope this helps

I need help identifying and removing annoying gadget that shows all open windows and applications when I mouse over a corner.

It seemed like a good idea at the time. Some time ago I installed a gadget (doesn't seem to be an item in my Applications folder) which, when I mouse-over the lower-left corner of my screen, brings up a screen showing reduced-size versions of all open application windows and Finder windows. I've tried to identify what it is, and where it is located, so I can remove it, but to no avail.
I'd really appreciate any help getting rid of this thing. Thanks!

Hi Paul,
Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Check the System Preferences>Keyboard>Keyboard Shortcuts.

On my own website vdha.us, I am now getting many words that are purple and when you mouse over them, a new spamming window opens trying to sell something. IE-9 does not do this. How do I turn this off in firefox?

Sirs,
The below URL came up immediately when I tried to access our Newfangled website this morning http://vdha.us :
http://surveyprizecenter.com/survey/claimgift-GT-kw-7b.php?t202kw=Vdha.us&trimmedKeyword=Vdha.us
I prefer to use Firefox and very seldom use IE-9. but now I might be forced to remove Firefox 4.0.1 and resort to using IE-9 because of this situation.
I don’t know how spammers can use our website to exploit their spamming, but I can only imagine the complaints I am going to get from our Board of Directors and members about this.
Can you make them stop, or at least explain how it is that anyone can do this without our permission.
We have never allowed advertisement on our website and don’t plan on starting now.
I am now also getting many words that are purple with two lines under them, and when you mouse over them, a new spamming window opens automatically trying to sell something. How do I turn this off?
I would appreciate any expediency in the return of an answer that you can provide.
Kindest Regards,
Dave Broeker
VDHA Life Member #1797
VDHA Webmaster & BX Manager
http://vdha.us

The "MySearchDial" app needs to be removed in 4 places.
1) Go to "add / remove programs" in your windows control panel select mysearchdial and remove it.
2) Open your Firefox browser then click the Firefox tab at the top left and select options. You will need to change the start page settings back to your preferred start page.
3) Again under the Firefox tab select "add-ons". In the add-ons manager you will need to remove mysearchdial from both "plugins" and "extensions"
4) In your search bar (top right of address bar" use the drop down menu and select "manage search engines". You can restore your preferred search engine and remove mysearchdial from the menu.
This should remove all the components of the nuisance hijacker and restore your browser back to your preferred settings. If you are comfortable with a more in depth removal I would also suggest going to your "programs" folder within the "C" drive of your machine and deleting the "MySearchDial" folder altogether. However, only do this AFTER you have uninstalled it from your system and if you are familiar with this type of removal.

Mouse Over Toolbar In Forms 4.5 and Registry stuff too

Is it possible to create an MS Office 97 /ie3/ie4 type of mouse
over toolbar in forms 4.5.....
I'm trying (with litlle success) to use images as buttons ...
unfortunately i have a lot of problems
1. each button has 4 states: flat, up, down, disabled... which
leads to 4 bitmaps...... 16 buttons * 4 bitmaps = 64 bitmaps to
be loading depending on what buttons are doing....
2. 1 could be solve by an array of images ( i think.... )
which would be loaded at runtime and swapped into the buttons as
i'd go.....
3. programming all those triggers... to deal with the mouse
states is very labourious and tricky (so what) but also i would
think quite ineffient.......
so if anyone could help me i'd really appreciate it
Also... does forms 5 maybe suppourt mouse over toolbars????
and lastly..... does oracle provide any mechanism for reading
from the windows registry..... to allow username and company
name to be extracted at runtime for use in a splash screen a la
MS word/excel/vis c++ etc
all help would be greatly appreciated....
Thanks
John Lanigan
Core.
null

1. Check the tnsnames entry in forms 4.5 and 10g home
2 open a command/dos prompt
set the ORACLE_HOME (eg set %ORACLE_HOME%=C:\dev10g
set the TNS_ADMIN
3 Run tnsping <Enter your hostname>
4 Also check if you have recently installed any virus scanner /any other appln
5 Also run sqlplus from the command/dos prompt
Rajesh Alex

Creating a popup on mouse over in bar graph

Hi,
I want to create a popup using mouse over event on bar graph but I didn't find corresponding property in the property inspector. Is it possible to display a popup on mouse over in bar graph?
At present I am able to create a popup in the backing bean based on click event. I want to align it to the bar in the graph which was clicked. But now, it is being aligned to the bar graph as a whole(like above the graph , below the graph) when I use "RichPopup.PopupHints.HintTypes.HINT_ALIGN_ID, source". Is there a way to align it to the particular bar?
Any help is greatly appreciated
Thank you,
KK

Hi,
don't think you can align it to an area within a component. The align id property expects a component reference. Note that mouse over on a bar graph doesn't select the bar, which means that the data in the binding layer is not set to current (just in case that the data in the popup is meant to be dependent)
Frank

Imported movie of hard disc not working. Blank square and when mousing over

I have imported about 150 gig of mp4 video into my iMovie event library and no problems until now. The mp4's are stored on my external hard drive (1000gig) and add up to around 105 gig in total. iMovie is also stored on this hard drive. When I import into my event library everything was fine but now I have hit a point where any more mp4's come up in the event library as a blank file, when I mouse over them a still shot comes up of another pre-imported video that has nothing to do with that video and the file plays sound but there is no footage. I still have 50 gig of footage to import before I can start editing my movie.
I still have 750 gig free space on my external drive and I am using a Macbook with 4 gig of memory and 48 gig of 119 still available on my Mac hard drive, is this the problem? Does anyone have any solutions ?

Thanks again Tom, I worked out your clue, being "whoa" as to meaning I shouldn't have moved iMovie onto my hard drive, I have moved it back to my Mac and everything seems to be working fine now, fingers crossed. I am really getting good at importing now, but don't think you'll be rid of me just yet as I have a lot of editing to start in the near future!

Mouse Over Graphs and Legend

Similar Messages

Maybe you are looking for