Mouse pointer will sometimes disappear

mouse pointer will sometimes disappear

I think dissapearring mouse cursor has been a bug since 10.4. happens to me every day regardless of whether i am using a computer with more than one screen or not, and regardless of the mouse being used. I agree that the problem has gotten much worse with 10.8, with both wired and non-wired devices.
after much research and thousands of dollars invested in different mouse softwares, input devices, and monitors, I have determined that old simple wired input products are better. wi-fi is getting worse. the less amount of monitors are better. apple brand input products are the worst, but more importantly, are not entirely at fault.
I would suggest anyone suffering from disapearing cursors, that are not wifi, bluetooth, battery, monitor, software, web browser or website related, contact apple and complain. lots.
personally, I think this is a marketing bug, eventually apple will be entirely touch based, the only true method of eliminating mouse disapearance is to eliminate mouse and cursor altogether. to assist that future of marketing, bugs like this will proceed to worsen.

Similar Messages

  • Mouse point will not change to a hand to select - can goto task mgr to free & then get one click & then it freezes again??

    It is still happening even in these dialogue boxes. I can get one maybe two clicks of the mouse (pointer changes from arrow to hand) and then it will freeze again and I have to goto another program make a selection there or perform a mouse click and then go back to firefox. then it happens all over again.
    Running Windows XP SP3

    Also i have reinstalled the reader9 two  times and tried with reader8 also but in both the cases same problem.
    it would be gr8 help if someone can help.

  • Mouse pointer freezes sometimes

    Whenever I unplug my iPod (shuffle) from the keyboard (of course after having the volume unmounted), some seconds later the mouse pointer freezes and the computer is totally unresponsive for some seconds. Then everything is normal again, i.e. the mouse pointer can be moved again.
    The "system.log" tells something about communication problems with the USB and bus reset or similar.
    Is this meant with "hot pluggable"? Should not the iPod be independent from the keyboard or mouse?

    As far as I remember:
    - It does not happen when directly connected to the computer
    - It has never happened with the G3, only with the G5
    And, yes, the iPod's firmware is the latest one.
    And: Connecting the iPod to the keyboard is just more convenient, even if it's slower. As the MacOS does multitasking, I do not mind if a data transfer runs with two megabytes per second or with one, because I can do something else in the meantime.

  • Mouse Pointer Disappearing and reappearing

    For the past few days my Mouse Pointer will randomly disappear for unspecified lengths and then reappear. I am using the new Blue Tooth Magic Mouse. It also happens with a wired mouse. I have searched high and low for an answer. I however fall to anyone in this group that would know the answer. Thanks.

    I'm having the same problem, it just started this morning when i did system updates "Security Update 2010-003", "iTunes v. 9.1.1", "Safari 4.0.5", "AirPort Base Station 5.5.1", "Xcode 3.2.2".
    I am using a Mac Pro with a Microsoft mouse, so it has nothing to do with the magic mouse. It's really annoying and making it hard to work! It affects many apps as far as I can tell.
    Model Name: Mac Pro
    Model Identifier: MacPro1,1
    Processor Name: Dual-Core Intel Xeon
    Processor Speed: 3 GHz
    Number Of Processors: 2
    Total Number Of Cores: 4
    L2 Cache (per processor): 4 MB
    Memory: 14 GB
    Bus Speed: 1.33 GHz
    Boot ROM Version: MP11.005C.B08
    SMC Version (system): 1.7f10
    System Version: Mac OS X 10.6.3 (10D573)
    Kernel Version: Darwin 10.3.0

  • Mouse pointer disappearing when recording audio?

    I'm having trouble recording audio in presenter -- when I get started recording, after the first slide the mouse pointer seems to disappear onscreen. I can't do anything except clicking escape which brings up the save window and I can use my keyboard to navigate and click save. Then the mouse reappears.
    Has this happened to anyone else? Any solutions?

    Yes.  This has happened to me, consistently.  I am using Windows 8.1, Office 2013 (64-bit).
    I have Adobe Presenter 7 and 8.  I purchased 10 (as an upgrade), but it wouldn't install because the "upgrade" is ONLY available if you're upgrading from Presenter version 9 (something they don't tell you before you buy).  This is a separate issue--I've asked for a refund and in the meantime, I'm using the trial version of 10.
    As I record, I notice the arrow from the mouse-pointer disappears and will not re-appear.  I must hit "escape" and save the work that way.  I have tried re-booting, and disabling add-ins.  Nothing seems to work.
    I'm afraid we have another "glitch" in an Adobe Product.  What else is new?

  • The case of the disappearing mouse pointer

    I use Keynote 3 several times a week to make up my presentations for work.
    I use my eMac at home, running Panther (my work place uses Windows) and then I transfer the completed file over my home network to my iBook. I take my iBook to work, hook it up to a projector and give the presentation.
    Lately, an interesting fault has arisen.
    Say I'm making up a slide. Suddenly, my mouse pointer disappears.
    I can physically wriggle the mouse and so on but I still can't see the pointer.
    I used to save my work using "command S" and then re-open the file and the mouse pointer would be there again.
    I now don't bother closing the file. I just twirl the mouse around a bit and the pointer eventually appears, usually from underneath the dock or, up in the file menu somewhere. Yes, that's right. Very weird. The mouse pointer seems to disappear under the window of the Keynote program.
    Everything seems to work OK for a while and then it happens again.
    This is getting really annoying.
    I can't figure out if it's an eMac fault or a Keynote problem.
    I don't seem to be able to reproduce the fault when I use my iBook (running Tiger) to make up a presentation.
    Has anyone else come across this fault before?
    Any help would be appreciated.
    Thanks.

    Hello Brie
    I apologise for not replying sooner. I've been away.
    I tried your suggestion but it didn't make any difference.
    I've just done 6 presentations over the last week and everything worked fine.
    However, last night, I was making up a presentation and again, the mouse pointer disappeared.
    Stange!
    I think it is a bug in the program.
    Anyway, thanks for the reply
    Regards
    JN

  • Mouse pointer goes for itself

    My mouse pointer will jump quickly to the corners of the display while working with it. I've made different adjustments to the mouse tracking speed to no evail. Does anyone have the answer? It is quite annoying when in the middle of a graphics project.

    Hello,
    While the problem is more related to the perception of the optics in the mouse, than it is the mouse pad; a good mouse pad will make a difference.
    I have been using Optical mice for a couple of years now. And, the problem you point out has been consistent in all of them (various brands and models).
    Apple's optical mice are very sensitive about changes in the texture of the surface they are on. Patterns need to be very consistent, and very regular.
    The problem has to do with how sensitive your optical mouse is to changes in the surface that you are moving over. You will have your best results on Mouse Pads designed for optical mice.
    I finally found a mouse pad that minimized the problem for me.
    I was in Office Depot in the Seattle, Washington area, and noticed these excellent pads.
    I am very particular about the Pads. I will not use a cloth pad, or anything with any thickness to it at all.
    I don't like cloth pads because they get disgusting and nasty. Furthermore, I don't like pads that are thicker than a single sheet of fine paper. I find thick pads uncomfortable.
    So, I had been specifically looking for a good mouse pad that was not only suitable for optical mice, but also extremely thin. I used to have a thin one, but it wasn't good for optical setups.
    So, with all the above in mind, I set out looking for a new mouse pad for my optical mice.
    I looked around my local area, and couldn't find anything suitable for optical mice that was also extremely thin.
    So, while in Washington, I stopped by every store we passed that might have something suitable. Finally, Office Depot had it.
    They are round mouse pads, as thin (or thinner) than a sheet of paper), and have a pattern that optical mice like.
    They are called "WOW!PAD"
    The company that makes them is at:
    http://www.microthin.com
    My pad is "Dots 007" if you look at the pictures on the page at:
    http://www.microthin.com/prod_wowpaddesigns.htm
    You can read more about the pads by going to the following page, and selecting the different options in the selection box:
    http://www.microthin.com/prod_wowpad.htm
    I've found that it almost completely eliminated the pointer problems on my Microsoft Mouse, and 100% eliminated the problems on both my Apple Pro mouse and Mighty Mouse.
    My Apple mice don't jump around at all now. So, give that a try. I think you'll be pleasantly surprised.
    I hope this helps.
    Let us know if you have other questions.
    P.S., if you'd like, go ahead and click the "Helpful" or "Solved" buttons on any of the posts / replies above if you feel they were helpful or adequately answered your question.

  • Jumping mouse pointer

    I've seen other posts describing a problem similar to mine. But I have not been able to resolve my problem. I'm hoping someone can suggest a resolution. I'm using my Mac Pro (early 2009) with a 4850 graphics card. I have always had 2 monitors attached. Both are Viewsonic. One is a 19" VA1930wm. The other is a 22" VG2230wm.
    For a few months now, I've noticed that my mouse pointer will jump around on the screen, making control very difficult, especially when playing video games. I took my Mac to my Apple Store to have it checked. They ran several diagnostics and were unable to replicate the problem. Btu here at home, I continue to have a problem. I thought it was a problem with the blue tooth, but I also have the problem when using corded mice.
    The other day, I bought a new corded mouse to use. I noticed that the jumping problem was very consistent. It happened at a very constant time interval of about 2 seconds. As I considered this, I realized that when they were diagnosing the problem at the Apple Store, they were only using one monitor. So I decided to disconnect one monitor and see what happened.
    I disconnected the 22" monitor, leaving the 19" connected. Immediately, the mouse jumping problem went away. Then I decided to switch monitors. I disconnected the 19" and reconnected the 22". The problem came right back. I then switched the 22" monitor between the two video ports. It didn't matter which port was used, the problem persisted.
    I contacted Viewsonic and, after some discussion, they gave me an RMA to send the monitor in for maintenance. My question here is whether it is a problem with the monitor or if it could be something else. If anyone has any suggestions, I would appreciate hearing them.

    I just got a new mid-2010 8-core mac pro and this same problem is occurring for me. I have a logitech mx revolution and when I first set the system up from scratch it wasn't working well so I switched it out for the magic mouse it came with. The same thing was happening with that. I then tried magicpref to see if that somehow fixed it. It didn't. Since then I've removed the logitech control center and magicpref utilities and even tried a wired mouse. I'm still having the erratic mouse movement.
    I haven't tried disconnecting my second monitor, but what's strange is when I start up the mac pro the secondary monitor flickers for a few minutes. I have no idea why it would do that or if it's related...

  • Undo bug, mouse pointer disappears?

    Is just me or everyone has that annoying "undo" bug?
    That's what happens: when I press UNDO speedgrade starts to behave strangely.
    - If I press undo after clicking right mouse button (and I'm moving a color wheel with mouse) comes out a message "optimizing timeline" and timeline thumbnails are shown under the timeline. Sometimes there is a worst scenario: mouse pointer disappears and I have to quit SG and reopen to get my pointer back.
    - Pressing ctrl-z without right mouse button clicked (outside wheel edit mode, or whatever it is called..) sometimes works, sometimes appears the annoying progress bar "optimizing timeline" and several steps of undo are taken, even if I pressed cmd+z just one time.
    I use undo A LOT, and now I'm not confident using it because of this strange behavior (I'm on osx).
    Are you experiencing the same problems?

    You won't believe this but just cleaning a mouse can improve performance... read the following:
    How to Clean a Mechanical Mouse
    This article explains when and how you should clean a mechanical mouse. It does not apply to the the Apple Pro Mouse.
    You should clean a mouse if it is does not track smoothly, or if it jumps or skips. A mouse contains a small ball that must roll smoothly for the mouse to work properly. You should keep this ball free of dirt and oil by using the mouse on a clean, lint-free surface, and cleaning it occasionally.
    Use the following procedure to clean a mouse:
    1. Turn off your computer.
    2. Turn the mouse upside down and rotate the plastic ring on the bottom counterclockwise to release it.
    3. Turn the mouse right side up with one hand and catch the ring and ball with your other hand.
    4. Clean the three small rollers inside the mouse with a cotton swab moistened with water. Rotate the rollers to clean all around them. If there is a build-up of material on the rollers that the cotton swab does not remove, you can use your fingernail to gently remove the material.
    5. Wash the mouse ball in soapy, warm water with a mild soap such as a dishwashing liquid if oil from your hands has collected on it. Be sure to dry the mouse ball thoroughly.
    6. Gently blow into the mouse case to remove any accumulated dust.
    7. Put the mouse ball back in the mouse case and replace the retaining ring.
    If cleaning the mouse as described does not correct your issue, the mouse may need to be replaced. Have an Apple Authorized Service Provider check it for excessive wear or other failure.
    If that doesn't do the trick, if this is a mouse that required 3rd party drivers, you might try reinstalling the drivers. Also, try going back to default Mouse preferences on all Users, see if makes a difference.
    Carolyn

  • Mouse pointer disappearing

    mouse pointer disappearing mostly in safary and its back when i change to direfent tags

    BillPStudios wrote:
    Cauld,
    Thanks!    So far the Ctrl-Alt-Del then Escape brings back my mouse pointer.
    Obviously, I'm not going to mark this as a solution but at least you've saved me from having to reboot frequently. I appreciate your participation.
    Steven,
     This error is unrelated to the physical mouse being plugged in. It happens in tablet and laptop mode,  I've tried to follow my actions to determine when it disappears but as far as I can tell it's random.  Suddenly I'll go to do something and I no longer have a arrow on my screen.  If I move my finger around the touch pad I can tell it's still calculating where the mouse pointer is located but there's no image to confirm the location.
    I have experienced freezing but only when I try to close an application in full screen mode using the system menu icon on the top left. It usually will trigger some form of the left swipe for active programs. Instead of the normal program images I get a small square in the top left and it freezes for about a minute.  I'm trying to relearn my habit of exiting a program by using the top right title bar icon.
    So,  Lenovo support, please keep open the disappearing mouse pointer report. I'm willing to accept the possibility it is a software app conflict and will let you know if I can track down the cause.
    Thanks,
    Bill
    Thanks Bill,
    I will keep an eye open should I experience the same kind of issue, so far I have not.
    Steven | Business Analyst
    E.S. Williams and Associates Inc.

  • Mouse pointer disappears and makes strange movements

    First: I'm afraid my English is not good enough (I speak Spanish).
    So,
    Sometimes the mouse pointer disappears but it's still able to click. It reappears when I do right click. Also, sometimes the pointer have a strange behavior, like crazy movements very fast. I just wait 10 second and it work fine again. I don't know if anyone here have this problems too.

    You won't believe this but just cleaning a mouse can improve performance... read the following:
    How to Clean a Mechanical Mouse
    This article explains when and how you should clean a mechanical mouse. It does not apply to the the Apple Pro Mouse.
    You should clean a mouse if it is does not track smoothly, or if it jumps or skips. A mouse contains a small ball that must roll smoothly for the mouse to work properly. You should keep this ball free of dirt and oil by using the mouse on a clean, lint-free surface, and cleaning it occasionally.
    Use the following procedure to clean a mouse:
    1. Turn off your computer.
    2. Turn the mouse upside down and rotate the plastic ring on the bottom counterclockwise to release it.
    3. Turn the mouse right side up with one hand and catch the ring and ball with your other hand.
    4. Clean the three small rollers inside the mouse with a cotton swab moistened with water. Rotate the rollers to clean all around them. If there is a build-up of material on the rollers that the cotton swab does not remove, you can use your fingernail to gently remove the material.
    5. Wash the mouse ball in soapy, warm water with a mild soap such as a dishwashing liquid if oil from your hands has collected on it. Be sure to dry the mouse ball thoroughly.
    6. Gently blow into the mouse case to remove any accumulated dust.
    7. Put the mouse ball back in the mouse case and replace the retaining ring.
    If cleaning the mouse as described does not correct your issue, the mouse may need to be replaced. Have an Apple Authorized Service Provider check it for excessive wear or other failure.
    If that doesn't do the trick, if this is a mouse that required 3rd party drivers, you might try reinstalling the drivers. Also, try going back to default Mouse preferences on all Users, see if makes a difference.
    Carolyn

  • Mouse pointer disappears when screen sharing

    When I use Back To My Mac from work to screen share my home Mac the pointer disappears. When I first connect and put the screen sharing window into full screen mode (into a separate space) everything is fine. I can then switch back to my current Macs screen and the mouse pointer is still working. But when I switch back to the screen sharing space the pointer is gone.

    yes! i have this problem.
    the difference is that it only happens when I'm using my thunderbolt display.
    i have an mb air and a mbp retina. there is no issue until i'm connected to it - then i get this freeze issue during screen share and my hidden dock won't appear.
    i've had 2 calls with applecare to date. will update you after my next call
    have you had any luck?

  • Disappearing mouse pointer when resuming from sleep

    I am having an issue where my X1-Carbon Touch returns from sleep, the mouse pointer is not visible.  I can see the items being highlighted.  The touch screen works fine.  Eventually for unknown reasons it finally re-appears.  Sometimes a couple of minutes sometimes over an hour.  Restarting the machine fixes the problem, but it is a real pain.
    OS: Windows 8 Pro, with most recent Windows update

    Hi, littlejohnjt
    This sounds like it may be an issue with the UltraNav driver. I would recommend opening the Charms Bar and selecting Search and typing Device Manager into the Search box. Lastly, select Settings beneath the Search box to filter by settings instead of programs. Once in Device Manager, open the tree for Mice and other pointing devices. Right-click on the device that appears in the tree and select Properties. From here, navigate to the Driver tab and select Uninstall... from the bottom of the list and then follow the prompts. After the device is uninstalled, restart the machine. This process allows Windows to install a generic driver, which may help your issues. If it does, I would try installing the Synaptics mouse and keyboard driver found here, as it has helped others with similar issues in the past.
    Hope it helps,
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

  • Wireless mouse pointer which does not move after boot *sometimes*

    Hi,
    I have a wireless keyboard/mouse combo from Logitech (MK700 keyboard and MX705 mouse), which uses a USB receiver.
    After booting, the mouse pointer sometimes is completely blocked, and I have to reboot to make it work. Sometimes I need to do this twice. I cannot reproduce it and this is not linked to the fact the mouse is active or on sleep mode. This seems to be a race condition, considering it is difficult to reproduce. Once the mouse pointer is working, there is no issue anymore during desktop use.
    I compared lsmod when mouse pointer is working or not, and did not see any difference in the loaded modules.
    This started to happen maybe 3 months ago. I have had this hardware for two years with no problem in the past. It is not a battery problem either.
    Has anyone an idea?
    Last edited by zebulon (2012-03-21 07:22:53)

    Thanks.
    Ther is indeed a difference in evedev detection in Xorg logs when mouse is working or not working.
    Not working:
    [ 22.745]
    X.Org X Server 1.12.0
    Release Date: 2012-03-04
    [ 22.765] X Protocol Version 11, Revision 0
    [ 22.765] Build Operating System: Linux 3.2.9-1-ARCH x86_64
    [ 22.765] Current Operating System: Linux arch 3.2.12-1-ARCH #1 SMP PREEMPT Mon Mar 19 17:50:01 CET 2012 x86_64
    [ 22.765] Kernel command line: root=/dev/sda6 ro vga=891
    [ 22.765] Build Date: 05 March 2012 05:59:48AM
    [ 22.765]
    [ 22.765] Current version of pixman: 0.24.4
    [ 22.765] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 22.765] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 22.765] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 23 06:16:55 2012
    [ 22.816] (==) Using config file: "/etc/X11/xorg.conf"
    [ 22.816] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 22.841] (==) No Layout section. Using the first Screen section.
    [ 22.841] (**) |-->Screen "screen1" (0)
    [ 22.841] (**) | |-->Monitor "monitor1"
    [ 22.841] (**) | |-->Device "device1"
    [ 22.841] (**) Option "IgnoreABI" "True"
    [ 22.841] (**) Ignoring ABI Version
    [ 22.841] (==) Automatically adding devices
    [ 22.841] (==) Automatically enabling devices
    [ 22.866] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 22.866] Entry deleted from font path.
    [ 22.871] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 22.871] Entry deleted from font path.
    [ 22.871] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 22.871] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 22.871] Entry deleted from font path.
    [ 22.871] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 22.871] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/
    [ 22.871] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 22.871] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 22.871] (II) Loader magic: 0x7cef60
    [ 22.871] (II) Module ABI versions:
    [ 22.871] X.Org ANSI C Emulation: 0.4
    [ 22.871] X.Org Video Driver: 12.0
    [ 22.871] X.Org XInput driver : 16.0
    [ 22.871] X.Org Server Extension : 6.0
    [ 22.872] (--) PCI:*(0:1:0:0) 10de:05e2:1682:2394 rev 161, Mem @ 0xf8000000/16777216, 0xe0000000/268435456, 0xf6000000/33554432, I/O @ 0x0000cf00/128, BIOS @ 0x????????/524288
    [ 22.872] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 22.872] (WW) "dri" will not be loaded unless you've specified it to be loaded elsewhere.
    [ 22.872] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    [ 22.872] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    [ 22.872] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 22.872] (II) "record" will be loaded by default.
    [ 22.872] (II) "dri" will be loaded even though the default is to disable it.
    [ 22.872] (II) "dri2" will be loaded by default.
    [ 22.872] (II) LoadModule: "dbe"
    [ 22.948] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 22.955] (II) Module dbe: vendor="X.Org Foundation"
    [ 22.955] compiled for 1.12.0, module version = 1.0.0
    [ 22.955] Module class: X.Org Server Extension
    [ 22.955] ABI class: X.Org Server Extension, version 6.0
    [ 22.955] (II) Loading extension DOUBLE-BUFFER
    [ 22.955] (II) LoadModule: "v4l"
    [ 22.955] (WW) Warning, couldn't open module v4l
    [ 22.955] (II) UnloadModule: "v4l"
    [ 22.955] (II) Unloading v4l
    [ 22.955] (EE) Failed to load module "v4l" (module does not exist, 0)
    [ 22.955] (II) LoadModule: "extmod"
    [ 22.955] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 22.968] (II) Module extmod: vendor="X.Org Foundation"
    [ 22.968] compiled for 1.12.0, module version = 1.0.0
    [ 22.968] Module class: X.Org Server Extension
    [ 22.968] ABI class: X.Org Server Extension, version 6.0
    [ 22.968] (II) Loading extension MIT-SCREEN-SAVER
    [ 22.968] (II) Loading extension XFree86-VidModeExtension
    [ 22.968] (II) Loading extension XFree86-DGA
    [ 22.968] (II) Loading extension DPMS
    [ 22.968] (II) Loading extension XVideo
    [ 22.968] (II) Loading extension XVideo-MotionCompensation
    [ 22.968] (II) Loading extension X-Resource
    [ 22.968] (II) LoadModule: "glx"
    [ 22.968] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 24.007] (II) Module glx: vendor="NVIDIA Corporation"
    [ 24.018] compiled for 4.0.2, module version = 1.0.0
    [ 24.018] Module class: X.Org Server Extension
    [ 24.018] (II) NVIDIA GLX Module 295.20 Mon Feb 6 21:28:16 PST 2012
    [ 24.018] (II) Loading extension GLX
    [ 24.018] (II) LoadModule: "record"
    [ 24.019] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 24.026] (II) Module record: vendor="X.Org Foundation"
    [ 24.026] compiled for 1.12.0, module version = 1.13.0
    [ 24.026] Module class: X.Org Server Extension
    [ 24.026] ABI class: X.Org Server Extension, version 6.0
    [ 24.026] (II) Loading extension RECORD
    [ 24.026] (II) LoadModule: "dri2"
    [ 24.026] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 24.034] (II) Module dri2: vendor="X.Org Foundation"
    [ 24.034] compiled for 1.12.0, module version = 1.2.0
    [ 24.034] ABI class: X.Org Server Extension, version 6.0
    [ 24.034] (II) Loading extension DRI2
    [ 24.034] (II) LoadModule: "nvidia"
    [ 24.035] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 24.111] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 24.120] compiled for 4.0.2, module version = 1.0.0
    [ 24.120] Module class: X.Org Video Driver
    [ 24.154] (II) NVIDIA dlloader X Driver 295.20 Mon Feb 6 21:09:10 PST 2012
    [ 24.154] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 24.161] (++) using VT number 7
    [ 24.734] (II) Loading sub module "fb"
    [ 24.734] (II) LoadModule: "fb"
    [ 24.735] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 24.832] (II) Module fb: vendor="X.Org Foundation"
    [ 24.832] compiled for 1.12.0, module version = 1.0.0
    [ 24.832] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 24.832] (II) Loading sub module "wfb"
    [ 24.832] (II) LoadModule: "wfb"
    [ 24.832] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 27.003] (II) Module wfb: vendor="X.Org Foundation"
    [ 27.003] compiled for 1.12.0, module version = 1.0.0
    [ 27.003] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 27.003] (II) Loading sub module "ramdac"
    [ 27.003] (II) LoadModule: "ramdac"
    [ 27.003] (II) Module "ramdac" already built-in
    [ 29.070] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 29.070] (==) NVIDIA(0): RGB weight 888
    [ 29.070] (==) NVIDIA(0): Default visual is TrueColor
    [ 29.070] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 29.070] (**) NVIDIA(0): Option "UseEdidDpi" "False"
    [ 29.070] (**) NVIDIA(0): Option "DPI" "96 x 96"
    [ 29.070] (**) NVIDIA(0): Enabling 2D acceleration
    [ 31.411] (II) NVIDIA(GPU-0): Display (SAMSUNG (DFP-1)) does not support NVIDIA 3D Vision
    [ 31.411] (II) NVIDIA(GPU-0): stereo.
    [ 31.416] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 260 (GT200) at PCI:1:0:0 (GPU-0)
    [ 31.416] (--) NVIDIA(0): Memory: 917504 kBytes
    [ 31.416] (--) NVIDIA(0): VideoBIOS: 62.00.50.00.52
    [ 31.416] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 31.416] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    [ 31.417] (--) NVIDIA(0): Connected display device(s) on GeForce GTX 260 at PCI:1:0:0
    [ 31.417] (--) NVIDIA(0): SAMSUNG (DFP-1)
    [ 31.417] (--) NVIDIA(0): SAMSUNG (DFP-1): 330.0 MHz maximum pixel clock
    [ 31.417] (--) NVIDIA(0): SAMSUNG (DFP-1): Internal Dual Link TMDS
    [ 31.503] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 31.503] (**) NVIDIA(0): device SAMSUNG (DFP-1) (Using EDID frequencies has been
    [ 31.503] (**) NVIDIA(0): enabled on all display devices.)
    [ 31.538] (II) NVIDIA(0): Assigned Display Device: DFP-1
    [ 31.538] (WW) NVIDIA(0): No valid modes for "1600x900"; removing.
    [ 31.538] (WW) NVIDIA(0): No valid modes for "1366x768"; removing.
    [ 31.538] (WW) NVIDIA(0): No valid modes for "1360x765"; removing.
    [ 31.538] (II) NVIDIA(0): Validated modes:
    [ 31.538] (II) NVIDIA(0): "1920x1080"
    [ 31.538] (II) NVIDIA(0): "1280x720"
    [ 31.538] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
    [ 31.566] (**) NVIDIA(0): DPI set to (96, 96); computed from "DPI" X config option
    [ 31.566] (--) Depth 24 pixmap format is 32 bpp
    [ 31.567] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
    [ 31.571] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 31.571] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 31.571] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 31.571] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 31.571] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 31.571] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 31.571] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 31.571] (II) NVIDIA(0): Config Options in the README.
    [ 31.575] (II) NVIDIA(0): Setting mode "1920x1080"
    [ 31.608] (II) Loading extension NV-GLX
    [ 31.630] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 31.630] (==) NVIDIA(0): Backing store disabled
    [ 31.630] (==) NVIDIA(0): Silken mouse enabled
    [ 31.631] (**) NVIDIA(0): DPMS enabled
    [ 31.631] (II) Loading extension NV-CONTROL
    [ 31.631] (II) Loading extension XINERAMA
    [ 31.631] (WW) NVIDIA(0): Option "PreferredMode" is not used
    [ 31.631] (II) Loading sub module "dri2"
    [ 31.631] (II) LoadModule: "dri2"
    [ 31.631] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 31.631] (II) Module dri2: vendor="X.Org Foundation"
    [ 31.631] compiled for 1.12.0, module version = 1.2.0
    [ 31.631] ABI class: X.Org Server Extension, version 6.0
    [ 31.631] (II) NVIDIA(0): [DRI2] Setup complete
    [ 31.631] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 31.631] (==) RandR enabled
    [ 31.631] (II) Initializing built-in extension Generic Event Extension
    [ 31.631] (II) Initializing built-in extension SHAPE
    [ 31.631] (II) Initializing built-in extension MIT-SHM
    [ 31.631] (II) Initializing built-in extension XInputExtension
    [ 31.631] (II) Initializing built-in extension XTEST
    [ 31.631] (II) Initializing built-in extension BIG-REQUESTS
    [ 31.631] (II) Initializing built-in extension SYNC
    [ 31.631] (II) Initializing built-in extension XKEYBOARD
    [ 31.631] (II) Initializing built-in extension XC-MISC
    [ 31.631] (II) Initializing built-in extension SECURITY
    [ 31.631] (II) Initializing built-in extension XINERAMA
    [ 31.631] (II) Initializing built-in extension XFIXES
    [ 31.631] (II) Initializing built-in extension RENDER
    [ 31.631] (II) Initializing built-in extension RANDR
    [ 31.631] (II) Initializing built-in extension COMPOSITE
    [ 31.631] (II) Initializing built-in extension DAMAGE
    [ 31.632] (II) Initializing extension GLX
    [ 32.105] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 32.105] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 32.105] (II) LoadModule: "evdev"
    [ 32.105] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 32.188] (II) Module evdev: vendor="X.Org Foundation"
    [ 32.188] compiled for 1.12.0, module version = 2.7.0
    [ 32.188] Module class: X.Org XInput Driver
    [ 32.188] ABI class: X.Org XInput driver, version 16.0
    [ 32.188] (II) Using input driver 'evdev' for 'Power Button'
    [ 32.188] (**) Power Button: always reports core events
    [ 32.188] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 32.188] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 32.188] (--) evdev: Power Button: Found keys
    [ 32.188] (II) evdev: Power Button: Configuring as keyboard
    [ 32.188] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
    [ 32.188] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 32.188] (**) Option "xkb_rules" "evdev"
    [ 32.188] (**) Option "xkb_model" "evdev"
    [ 32.188] (**) Option "xkb_layout" "gb"
    [ 32.240] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 32.240] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 32.240] (II) Using input driver 'evdev' for 'Power Button'
    [ 32.240] (**) Power Button: always reports core events
    [ 32.240] (**) evdev: Power Button: Device: "/dev/input/event1"
    [ 32.240] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 32.241] (--) evdev: Power Button: Found keys
    [ 32.241] (II) evdev: Power Button: Configuring as keyboard
    [ 32.241] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
    [ 32.241] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 32.241] (**) Option "xkb_rules" "evdev"
    [ 32.241] (**) Option "xkb_model" "evdev"
    [ 32.241] (**) Option "xkb_layout" "gb"
    [ 32.241] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:2008 (/dev/input/event0)
    [ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: Applying InputClass "evdev keyboard catchall"
    [ 32.241] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:2008'
    [ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: always reports core events
    [ 32.241] (**) evdev: Logitech Unifying Device. Wireless PID:2008: Device: "/dev/input/event0"
    [ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Vendor 0x46d Product 0xc52b
    [ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found 1 mouse buttons
    [ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found scroll wheel(s)
    [ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found relative axes
    [ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Forcing relative x/y axes to exist.
    [ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found absolute axes
    [ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Forcing absolute x/y axes to exist.
    [ 32.241] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found keys
    [ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Configuring as mouse
    [ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Configuring as keyboard
    [ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Adding scrollwheel support
    [ 32.241] (**) evdev: Logitech Unifying Device. Wireless PID:2008: YAxisMapping: buttons 4 and 5
    [ 32.241] (**) evdev: Logitech Unifying Device. Wireless PID:2008: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 32.241] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.2/0003:046D:C52B.0003/input/input0/event0"
    [ 32.241] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:2008" (type: KEYBOARD, id 8)
    [ 32.241] (**) Option "xkb_rules" "evdev"
    [ 32.241] (**) Option "xkb_model" "evdev"
    [ 32.241] (**) Option "xkb_layout" "gb"
    [ 32.241] (II) evdev: Logitech Unifying Device. Wireless PID:2008: initialized for relative axes.
    [ 32.241] (WW) evdev: Logitech Unifying Device. Wireless PID:2008: ignoring absolute axes.
    [ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: (accel) keeping acceleration scheme 1
    [ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration profile 0
    [ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration factor: 2.000
    [ 32.241] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration threshold: 4
    [ 32.241] (II) config/udev: Adding input device UVC Camera (046d:09a4) (/dev/input/event4)
    [ 32.241] (**) UVC Camera (046d:09a4): Applying InputClass "evdev keyboard catchall"
    [ 32.241] (II) Using input driver 'evdev' for 'UVC Camera (046d:09a4)'
    [ 32.241] (**) UVC Camera (046d:09a4): always reports core events
    [ 32.241] (**) evdev: UVC Camera (046d:09a4): Device: "/dev/input/event4"
    [ 32.241] (--) evdev: UVC Camera (046d:09a4): Vendor 0x46d Product 0x9a4
    [ 32.241] (--) evdev: UVC Camera (046d:09a4): Found keys
    [ 32.241] (II) evdev: UVC Camera (046d:09a4): Configuring as keyboard
    [ 32.242] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-7/2-7:1.0/input/input4/event4"
    [ 32.242] (II) XINPUT: Adding extended input device "UVC Camera (046d:09a4)" (type: KEYBOARD, id 9)
    [ 32.242] (**) Option "xkb_rules" "evdev"
    [ 32.242] (**) Option "xkb_model" "evdev"
    [ 32.242] (**) Option "xkb_layout" "gb"
    [ 32.242] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
    [ 32.242] (II) No input driver specified, ignoring this device.
    [ 32.242] (II) This device may have been added with another device file.
    Working:
    [ 21.623]
    X.Org X Server 1.12.0
    Release Date: 2012-03-04
    [ 21.642] X Protocol Version 11, Revision 0
    [ 21.642] Build Operating System: Linux 3.2.9-1-ARCH x86_64
    [ 21.642] Current Operating System: Linux arch 3.2.12-1-ARCH #1 SMP PREEMPT Mon Mar 19 17:50:01 CET 2012 x86_64
    [ 21.642] Kernel command line: root=/dev/sda6 ro vga=891
    [ 21.642] Build Date: 05 March 2012 05:59:48AM
    [ 21.642]
    [ 21.642] Current version of pixman: 0.24.4
    [ 21.642] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 21.642] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 21.643] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 23 06:18:23 2012
    [ 21.702] (==) Using config file: "/etc/X11/xorg.conf"
    [ 21.702] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 21.727] (==) No Layout section. Using the first Screen section.
    [ 21.727] (**) |-->Screen "screen1" (0)
    [ 21.727] (**) | |-->Monitor "monitor1"
    [ 21.727] (**) | |-->Device "device1"
    [ 21.727] (**) Option "IgnoreABI" "True"
    [ 21.727] (**) Ignoring ABI Version
    [ 21.727] (==) Automatically adding devices
    [ 21.727] (==) Automatically enabling devices
    [ 21.752] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 21.752] Entry deleted from font path.
    [ 21.757] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 21.757] Entry deleted from font path.
    [ 21.757] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 21.765] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 21.765] Entry deleted from font path.
    [ 21.765] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 21.765] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/
    [ 21.765] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 21.765] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 21.765] (II) Loader magic: 0x7cef60
    [ 21.765] (II) Module ABI versions:
    [ 21.765] X.Org ANSI C Emulation: 0.4
    [ 21.765] X.Org Video Driver: 12.0
    [ 21.765] X.Org XInput driver : 16.0
    [ 21.765] X.Org Server Extension : 6.0
    [ 21.766] (--) PCI:*(0:1:0:0) 10de:05e2:1682:2394 rev 161, Mem @ 0xf8000000/16777216, 0xe0000000/268435456, 0xf6000000/33554432, I/O @ 0x0000cf00/128, BIOS @ 0x????????/524288
    [ 21.766] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 21.766] (WW) "dri" will not be loaded unless you've specified it to be loaded elsewhere.
    [ 21.766] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    [ 21.766] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    [ 21.766] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 21.766] (II) "record" will be loaded by default.
    [ 21.766] (II) "dri" will be loaded even though the default is to disable it.
    [ 21.766] (II) "dri2" will be loaded by default.
    [ 21.766] (II) LoadModule: "dbe"
    [ 21.826] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 21.833] (II) Module dbe: vendor="X.Org Foundation"
    [ 21.833] compiled for 1.12.0, module version = 1.0.0
    [ 21.833] Module class: X.Org Server Extension
    [ 21.833] ABI class: X.Org Server Extension, version 6.0
    [ 21.833] (II) Loading extension DOUBLE-BUFFER
    [ 21.833] (II) LoadModule: "v4l"
    [ 21.833] (WW) Warning, couldn't open module v4l
    [ 21.833] (II) UnloadModule: "v4l"
    [ 21.833] (II) Unloading v4l
    [ 21.833] (EE) Failed to load module "v4l" (module does not exist, 0)
    [ 21.833] (II) LoadModule: "extmod"
    [ 21.833] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 21.846] (II) Module extmod: vendor="X.Org Foundation"
    [ 21.846] compiled for 1.12.0, module version = 1.0.0
    [ 21.846] Module class: X.Org Server Extension
    [ 21.846] ABI class: X.Org Server Extension, version 6.0
    [ 21.846] (II) Loading extension MIT-SCREEN-SAVER
    [ 21.846] (II) Loading extension XFree86-VidModeExtension
    [ 21.846] (II) Loading extension XFree86-DGA
    [ 21.846] (II) Loading extension DPMS
    [ 21.846] (II) Loading extension XVideo
    [ 21.846] (II) Loading extension XVideo-MotionCompensation
    [ 21.846] (II) Loading extension X-Resource
    [ 21.846] (II) LoadModule: "glx"
    [ 21.846] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 22.902] (II) Module glx: vendor="NVIDIA Corporation"
    [ 22.913] compiled for 4.0.2, module version = 1.0.0
    [ 22.913] Module class: X.Org Server Extension
    [ 22.913] (II) NVIDIA GLX Module 295.20 Mon Feb 6 21:28:16 PST 2012
    [ 22.913] (II) Loading extension GLX
    [ 22.913] (II) LoadModule: "record"
    [ 22.913] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 22.921] (II) Module record: vendor="X.Org Foundation"
    [ 22.921] compiled for 1.12.0, module version = 1.13.0
    [ 22.921] Module class: X.Org Server Extension
    [ 22.921] ABI class: X.Org Server Extension, version 6.0
    [ 22.921] (II) Loading extension RECORD
    [ 22.921] (II) LoadModule: "dri2"
    [ 22.921] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 22.929] (II) Module dri2: vendor="X.Org Foundation"
    [ 22.929] compiled for 1.12.0, module version = 1.2.0
    [ 22.929] ABI class: X.Org Server Extension, version 6.0
    [ 22.929] (II) Loading extension DRI2
    [ 22.929] (II) LoadModule: "nvidia"
    [ 22.929] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 23.006] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 23.014] compiled for 4.0.2, module version = 1.0.0
    [ 23.014] Module class: X.Org Video Driver
    [ 23.040] (II) NVIDIA dlloader X Driver 295.20 Mon Feb 6 21:09:10 PST 2012
    [ 23.040] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 23.047] (++) using VT number 7
    [ 23.721] (II) Loading sub module "fb"
    [ 23.721] (II) LoadModule: "fb"
    [ 23.721] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 24.428] (II) Module fb: vendor="X.Org Foundation"
    [ 24.428] compiled for 1.12.0, module version = 1.0.0
    [ 24.428] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 24.428] (II) Loading sub module "wfb"
    [ 24.428] (II) LoadModule: "wfb"
    [ 24.428] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 26.531] (II) Module wfb: vendor="X.Org Foundation"
    [ 26.531] compiled for 1.12.0, module version = 1.0.0
    [ 26.531] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 26.531] (II) Loading sub module "ramdac"
    [ 26.531] (II) LoadModule: "ramdac"
    [ 26.531] (II) Module "ramdac" already built-in
    [ 27.811] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 27.811] (==) NVIDIA(0): RGB weight 888
    [ 27.811] (==) NVIDIA(0): Default visual is TrueColor
    [ 27.811] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 27.811] (**) NVIDIA(0): Option "UseEdidDpi" "False"
    [ 27.811] (**) NVIDIA(0): Option "DPI" "96 x 96"
    [ 27.811] (**) NVIDIA(0): Enabling 2D acceleration
    [ 29.881] (II) NVIDIA(GPU-0): Display (SAMSUNG (DFP-1)) does not support NVIDIA 3D Vision
    [ 29.881] (II) NVIDIA(GPU-0): stereo.
    [ 29.911] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 260 (GT200) at PCI:1:0:0 (GPU-0)
    [ 29.911] (--) NVIDIA(0): Memory: 917504 kBytes
    [ 29.911] (--) NVIDIA(0): VideoBIOS: 62.00.50.00.52
    [ 29.911] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 29.911] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    [ 29.911] (--) NVIDIA(0): Connected display device(s) on GeForce GTX 260 at PCI:1:0:0
    [ 29.911] (--) NVIDIA(0): SAMSUNG (DFP-1)
    [ 29.911] (--) NVIDIA(0): SAMSUNG (DFP-1): 330.0 MHz maximum pixel clock
    [ 29.911] (--) NVIDIA(0): SAMSUNG (DFP-1): Internal Dual Link TMDS
    [ 29.997] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 29.997] (**) NVIDIA(0): device SAMSUNG (DFP-1) (Using EDID frequencies has been
    [ 29.997] (**) NVIDIA(0): enabled on all display devices.)
    [ 30.033] (II) NVIDIA(0): Assigned Display Device: DFP-1
    [ 30.033] (WW) NVIDIA(0): No valid modes for "1600x900"; removing.
    [ 30.033] (WW) NVIDIA(0): No valid modes for "1366x768"; removing.
    [ 30.033] (WW) NVIDIA(0): No valid modes for "1360x765"; removing.
    [ 30.033] (II) NVIDIA(0): Validated modes:
    [ 30.033] (II) NVIDIA(0): "1920x1080"
    [ 30.033] (II) NVIDIA(0): "1280x720"
    [ 30.033] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
    [ 30.068] (**) NVIDIA(0): DPI set to (96, 96); computed from "DPI" X config option
    [ 30.068] (--) Depth 24 pixmap format is 32 bpp
    [ 30.068] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
    [ 30.072] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 30.072] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 30.072] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 30.072] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 30.072] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 30.072] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 30.072] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 30.072] (II) NVIDIA(0): Config Options in the README.
    [ 30.076] (II) NVIDIA(0): Setting mode "1920x1080"
    [ 30.119] (II) Loading extension NV-GLX
    [ 30.149] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 30.149] (==) NVIDIA(0): Backing store disabled
    [ 30.149] (==) NVIDIA(0): Silken mouse enabled
    [ 30.149] (**) NVIDIA(0): DPMS enabled
    [ 30.149] (II) Loading extension NV-CONTROL
    [ 30.150] (II) Loading extension XINERAMA
    [ 30.150] (WW) NVIDIA(0): Option "PreferredMode" is not used
    [ 30.150] (II) Loading sub module "dri2"
    [ 30.150] (II) LoadModule: "dri2"
    [ 30.150] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 30.150] (II) Module dri2: vendor="X.Org Foundation"
    [ 30.150] compiled for 1.12.0, module version = 1.2.0
    [ 30.150] ABI class: X.Org Server Extension, version 6.0
    [ 30.150] (II) NVIDIA(0): [DRI2] Setup complete
    [ 30.150] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 30.150] (==) RandR enabled
    [ 30.150] (II) Initializing built-in extension Generic Event Extension
    [ 30.150] (II) Initializing built-in extension SHAPE
    [ 30.150] (II) Initializing built-in extension MIT-SHM
    [ 30.150] (II) Initializing built-in extension XInputExtension
    [ 30.150] (II) Initializing built-in extension XTEST
    [ 30.150] (II) Initializing built-in extension BIG-REQUESTS
    [ 30.150] (II) Initializing built-in extension SYNC
    [ 30.150] (II) Initializing built-in extension XKEYBOARD
    [ 30.150] (II) Initializing built-in extension XC-MISC
    [ 30.150] (II) Initializing built-in extension SECURITY
    [ 30.150] (II) Initializing built-in extension XINERAMA
    [ 30.150] (II) Initializing built-in extension XFIXES
    [ 30.150] (II) Initializing built-in extension RENDER
    [ 30.150] (II) Initializing built-in extension RANDR
    [ 30.150] (II) Initializing built-in extension COMPOSITE
    [ 30.150] (II) Initializing built-in extension DAMAGE
    [ 30.151] (II) Initializing extension GLX
    [ 30.624] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 30.624] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 30.624] (II) LoadModule: "evdev"
    [ 30.624] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 30.633] (II) Module evdev: vendor="X.Org Foundation"
    [ 30.633] compiled for 1.12.0, module version = 2.7.0
    [ 30.633] Module class: X.Org XInput Driver
    [ 30.633] ABI class: X.Org XInput driver, version 16.0
    [ 30.633] (II) Using input driver 'evdev' for 'Power Button'
    [ 30.633] (**) Power Button: always reports core events
    [ 30.633] (**) evdev: Power Button: Device: "/dev/input/event4"
    [ 30.633] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 30.633] (--) evdev: Power Button: Found keys
    [ 30.633] (II) evdev: Power Button: Configuring as keyboard
    [ 30.633] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
    [ 30.633] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 30.633] (**) Option "xkb_rules" "evdev"
    [ 30.633] (**) Option "xkb_model" "evdev"
    [ 30.633] (**) Option "xkb_layout" "gb"
    [ 30.677] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 30.677] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 30.677] (II) Using input driver 'evdev' for 'Power Button'
    [ 30.677] (**) Power Button: always reports core events
    [ 30.677] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 30.677] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 30.677] (--) evdev: Power Button: Found keys
    [ 30.677] (II) evdev: Power Button: Configuring as keyboard
    [ 30.677] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
    [ 30.677] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 30.677] (**) Option "xkb_rules" "evdev"
    [ 30.677] (**) Option "xkb_model" "evdev"
    [ 30.677] (**) Option "xkb_layout" "gb"
    [ 30.677] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/event0)
    [ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: Applying InputClass "evdev pointer catchall"
    [ 30.677] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:101b'
    [ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: always reports core events
    [ 30.677] (**) evdev: Logitech Unifying Device. Wireless PID:101b: Device: "/dev/input/event0"
    [ 30.677] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Vendor 0x46d Product 0xc52b
    [ 30.677] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found 20 mouse buttons
    [ 30.677] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found scroll wheel(s)
    [ 30.677] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found relative axes
    [ 30.677] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found x and y relative axes
    [ 30.677] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Configuring as mouse
    [ 30.677] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Adding scrollwheel support
    [ 30.677] (**) evdev: Logitech Unifying Device. Wireless PID:101b: YAxisMapping: buttons 4 and 5
    [ 30.677] (**) evdev: Logitech Unifying Device. Wireless PID:101b: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 30.677] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.2/0003:046D:C52B.0003/input/input0/event0"
    [ 30.677] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:101b" (type: MOUSE, id 8)
    [ 30.677] (II) evdev: Logitech Unifying Device. Wireless PID:101b: initialized for relative axes.
    [ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: (accel) keeping acceleration scheme 1
    [ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration profile 0
    [ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration factor: 2.000
    [ 30.677] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration threshold: 4
    [ 30.677] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/mouse0)
    [ 30.677] (II) No input driver specified, ignoring this device.
    [ 30.677] (II) This device may have been added with another device file.
    [ 30.678] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:2008 (/dev/input/event1)
    [ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: Applying InputClass "evdev keyboard catchall"
    [ 30.678] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:2008'
    [ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: always reports core events
    [ 30.678] (**) evdev: Logitech Unifying Device. Wireless PID:2008: Device: "/dev/input/event1"
    [ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Vendor 0x46d Product 0xc52b
    [ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found 1 mouse buttons
    [ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found scroll wheel(s)
    [ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found relative axes
    [ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Forcing relative x/y axes to exist.
    [ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found absolute axes
    [ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Forcing absolute x/y axes to exist.
    [ 30.678] (--) evdev: Logitech Unifying Device. Wireless PID:2008: Found keys
    [ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Configuring as mouse
    [ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Configuring as keyboard
    [ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: Adding scrollwheel support
    [ 30.678] (**) evdev: Logitech Unifying Device. Wireless PID:2008: YAxisMapping: buttons 4 and 5
    [ 30.678] (**) evdev: Logitech Unifying Device. Wireless PID:2008: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 30.678] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.2/0003:046D:C52B.0003/input/input1/event1"
    [ 30.678] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:2008" (type: KEYBOARD, id 9)
    [ 30.678] (**) Option "xkb_rules" "evdev"
    [ 30.678] (**) Option "xkb_model" "evdev"
    [ 30.678] (**) Option "xkb_layout" "gb"
    [ 30.678] (II) evdev: Logitech Unifying Device. Wireless PID:2008: initialized for relative axes.
    [ 30.678] (WW) evdev: Logitech Unifying Device. Wireless PID:2008: ignoring absolute axes.
    [ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: (accel) keeping acceleration scheme 1
    [ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration profile 0
    [ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration factor: 2.000
    [ 30.678] (**) Logitech Unifying Device. Wireless PID:2008: (accel) acceleration threshold: 4
    [ 30.678] (II) config/udev: Adding input device UVC Camera (046d:09a4) (/dev/input/event5)
    [ 30.678] (**) UVC Camera (046d:09a4): Applying InputClass "evdev keyboard catchall"
    [ 30.678] (II) Using input driver 'evdev' for 'UVC Camera (046d:09a4)'
    [ 30.678] (**) UVC Camera (046d:09a4): always reports core events
    [ 30.678] (**) evdev: UVC Camera (046d:09a4): Device: "/dev/input/event5"
    [ 30.678] (--) evdev: UVC Camera (046d:09a4): Vendor 0x46d Product 0x9a4
    [ 30.678] (--) evdev: UVC Camera (046d:09a4): Found keys
    [ 30.678] (II) evdev: UVC Camera (046d:09a4): Configuring as keyboard
    [ 30.678] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-7/2-7:1.0/input/input5/event5"
    [ 30.678] (II) XINPUT: Adding extended input device "UVC Camera (046d:09a4)" (type: KEYBOARD, id 10)
    [ 30.678] (**) Option "xkb_rules" "evdev"
    [ 30.678] (**) Option "xkb_model" "evdev"
    [ 30.678] (**) Option "xkb_layout" "gb"
    [ 30.678] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
    [ 30.678] (II) No input driver specified, ignoring this device.
    [ 30.678] (II) This device may have been added with another device file.
    I note the differences start there:
    (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found x and y relative axes
    vs
    (II) evdev: Logitech Unifying Device. Wireless PID:2008: Forcing relative x/y axes to exist.
    Could my Logitech camera interfere with the keyboard/mouse unifier detection?

  • Mouse pointer disappears after using the magnifying glass in the color picker

    Hello,
    I've a problem (one more) with Lion on a Mac mini 2010. Every time I select a color from the screen using the magnifying glass in the color picker, the mouse pointer disappears. I've to move the mouse to the top of the screen and try to click the bar menu. If I succeed, I get the pointer back.
    Someone with the same problem?
    Thanks for reading

    I've found a partial solution: The probem doesn't affect to a new fresh user, so you can backup your data, create a new temporary (admin) user, delete the original account and create it again with the same name (to avoid file permission troubles). Remember to backup your data or it will be lost.

Maybe you are looking for