.mov file will not open in FCP X?! codec unavailable? help!

I am trying to edit a short .mov file in FCP X. It was sent to me via YouSendIt. Once it has completed downloading, a message reads:
" The document “S-T3RRA Video Heads by FLOOD(1)-2.mov” could not be opened. A required codec isn't available. To see if additional software is available that will enable QuickTime Player to open the movie, click Tell Me More. "
When I click tell me more, Apple provides me with some additional media support for QuickTime, however I should not need this for a .mov file correct? The file will not open in FCP X or QT. Any ideas? Suggestions?  Was this file incorrectly exported by the creator?
Help!!
Thank you!
Diego Lopez-Videla
Houston, TX

Yes, it will be encoded using a codec that's not on your system.
That is a common misunderstanding with .mov - it's not a format, it's a container.
It basically contains video & audio streams that may be mp4, mjpeg or just about anything.
In this case, the "anything" is what we need to find out, so we can work out what  you need to read it.
You could try opening it using VideoSpec - it will tell you everything.

Similar Messages

  • Mov file will not open on Premiere CS6 for Windows

    I am a student working on a project that I started in university on an Apple Mac desktop. I decided to carry my project back home to continue with it on a laptop which is Windows...however the Mov. files will not open up on premeire pro and it is really frustrating as I have done a lot of work. How can I import these videos without losing any work or having to start again?

    Quicktime X does NOT work http://forums.adobe.com/thread/888722
    -Premiere Pro REQUIRES Quicktime 7 won't work with Quicktime X

  • Saved .mov file will not open on a Windows 7 version of Quicktime or WMplayer or Nero  why not?

    I made two .mov files one will open on a PC the other will not Quicktime will opew the first file, but not the second, Windows Media Player will not open either file, neither will Nero or Creative Media Player.  How can I save a video file from iMovie to something that will opew on a PC?

    Is this related to iOS (iPads and iPhones)?
    This is the iMovie iOS forum, so if you're in the wrong place I can get this question moved.
    In iMovie iOS there is only one way to export video, and that is Quicktime H264.
    You will need the latest version of Quicktime for Windows.

  • .mov files will not open in quick time when double clicked in iPhoto

    when i'm in iPhoto and try to double click a video file, Quick Time will not open to play the movie.

    If its not working roll back QT.

  • My ai files will not open, keep stating unknown format. Help!

    I keep getting two different errors. My files are .ai files but will not open. I have not saved them as PDF's so I am not sure why I am getting the first error. Any ideas would be helpful!
    Thanks,
    Cyndi

    The first error indicates an issue, when you saved your files as PDF compatible. as a start, simply reinstall AI.
    Mylenium

  • Urgent Help Wanted With My Presentation - Mov Files Will Not Open

    I am a retired lifeboatman, and have developed a fund raising talk focusing on my 35 year involvement with saving lives off the UK southern coast.  I use Keynotes and have never had a problem, until now.  I have another talk next week and thought I would update the presentation.  I have updated to Mavericks and also the latest Keynotes 6.0.1.  When I went to play the presentation, it informed me that some of the .mov files needed to be updated to run on QuickTime.  I pressed the convert button, only to be informed that most of the files could not be upgraded.  When I try to play again, all I get is a blank black screen.  I closed Keynotes and reopened the file in version 5.3, but still the same problem occurred . Most of my video files are of actual rescues and have been transferred from old VHS tapes. and are invaluable to me.  It also means my presentation next week will be without the powerful impact these rescue videos present.  I have searched through the support communities and also on the web, and have tried various suggestions and trial programs for converting the files, but none have been able to provide me with any playable video.  Can anyone please help me to overcome this problems?  Any help would be gratefully received.  

    It's never a good idea to change operating systems and applications without fully testing over a period of time with existing work files first. As Mavericks is such a new operating system, there are a few quirks that are still in place compared to its predecessors.
    Many video types do not play in the new Quicktime 10 player that is included with Mavericks, but version 7 should play any type. Down load and install QuickTime player version 7 for Mavericks, this is a much better movie player than the simple version now included with Mavericks from here:    Download Apple QuickTime Player version 7
    Open the video file in QT 7 and check the video plays correctly.
    Let me know the CODEC used, it is listed against Format in the QT Inspector, (command I or Window > show movie inspector)
    In theory Keynote should now play your video again but let me see how you get on.

  • Mov reference file will not open in QuickTime 7.7.4 for Windows

    Hi,
    I have a mov reference file which opened fine in QuickTime 7.6.2 but since upgrading to 7.7.4 the file will no open. I get the following error:
    Error -2002: a bad public movie atom was found in the movie.
    The file contains one PAL MPEG2 video track and one stereo PCM audio track. It also contains a timecode track.
    See movie inspector below:
    Can anyone help me understand why this file will not open with the latest version of QuickTime. I cannot supply the file but can give any information about atoms etc. which can be read using QTAtomViewer.
    I am using Windows 7 and Windows Server 2008.
    Many thanks,
    Kate

    For those who want to call, the following menu options will get you to the Quick Time install tech support:
    2 - takes you to the Quick Time submenu
    2 - takes you to tech support
    then, choose 1 for Mac or 2 for windows
    Initially, I was told by tier 1 tech rep Shawn that the update server may not be up or that it may be a firewall issue on my side.
    After telling him that I have confirmed that it is a problem with the update server sending a NULL (0 byte) response to the update query, he said I would have to just download the latest one in order to have the most up-to-date version and "just check back periodically to see if the update server is working".
    He mentioned there was a Quick Time standalone download available (http://www.apple.com/quicktime/download/standalone.html), but that is still ~20MB & doesn't help the fact that probably over 90% of the people who run Quick Time have the option to automatically check for updates set and will never realize they're running an old, vulnerable version of Quick Time.
    He gave me a case number after I asked for one: 58027568
    If you'd like to add to mine and/or Rob's, it surely couldn't hurt.
    I suppose my next course is to try emailing contacts at apple to see what kind of response they have. Considering this problem has been there ever since QT 7 for Windows has been released (I don't remember ever checking for updates when running QT 7 beta), it's strange that it's still a problem.
    hand made system   Windows XP Pro  

  • I wanted a solution to the problem I was having on Win 7 Pro Service Pack 1 in that links on an open Adobe Acrobat file will not open in my Firefox Browser 33.0.2. The Error I receive is "Acrobat could not run the web browser.  Unknown Error. (123)"

    I want a solution to the problem I was having on Win 7 Pro Service Pack 1 in that links on an open Adobe Acrobat Pro 10.1.12  file will not open in my Firefox Browser 33.0.2. The Error I receive is "Acrobat could not run the web browser.  Unknown Error. (123)"

    Change browsers. See what happens.
    Be well...

  • PDF files will not open in a Safari (v 6.0.5) browser window

    PDF files will not open in a Safari (v 6.0.5) browser window, OS 10.8.5. Version 11.0.04 Adobe Reader and Plug-ins installed. Both local and internet files do not load. What is happening here?

    Ok. I reloaded v 11.0.04 of Adobe Reader after quiting Safari 6.0.5 . Then deleted the 2 plug-ins AdobePDFViewer.plugin and AdobePDFViewerNPAPI.plugin . Relaunched Safari and tried to read a pdf from a repository at the URL mentioned in post 10 . The file was loaded and displayed correctly. Also a pdf file from my local disk store displayed nicely as well. What I do not understand is that there is no listing of an Adobe plug in /Library/Internet Plug-Ins , nor does Safari list any Adobe plug ins. So in that case this means that plug-ins for the display of pdfs in Safari windows are no longer needed!
    Adobe Reader version 11.0.04  is now working for me.
    Thanks for the help and the solution C.F.McBlob

  • Pdf and vector files will not open in Adobe Illustrator after Yosemite Update

    I updated my OS on recommendation from apple. Pdf and vector files will not open in adobe illustrator now. Am i using the latest OS?

    Linda Feltner wrote:
    > I cannot import or open vector files in Freehand 10. I
    just get large
    > Xs instead of the image. I have a MAC OS 10.3.9,
    Freehand 10. I'm
    > trying to import some small files that are either .ai or
    .eps files
    > (all are vector) that open fine in Illustrator 10 (so I
    know they
    > work), but I can't use them in that program. I've tried
    adjusting in
    > Freehand Preferences the 'convert editable EPS files" ,
    on and off. I
    > tried adjusting the 'Embed...." selection on and off.
    Can anyone tell
    > me what thing I'm doing wrong. I have two files, they
    are map
    > boundaries, that need to scale and adjust their color
    and line width
    > over an aerial map. This can't be difficult, but I must
    be
    > overlooking something. Many thanks in advance. Linda
    >
    Freehand can't convert EPS files into editable vectors. I
    usually run
    EPS files through Illustrator and then into Frehand. If you
    don't have
    Illustrator you can convert the EPS into a PDF and that
    Freehand will
    sometimes convert into editable vectors (though it does
    involve a lot
    more clean up than going through Illustrator.)

  • I have just purchased a Canon 7d Mk2 but the raw files will not open in Cs5 and downloads of Adobe Camera Raw 8.7 will not install. What can I do?

    I have just purchased a Canon 7d Mk2 but the raw files will not open in Cs5 and downloads of Adobe Camera Raw 8.7 will not install. What can I do?

    Alternatively, install & use RawTherapee instead to develop your raw files instead (free and open source).
    http://rawtherapee.com/

  • I just bought the Nikon D750 and my raw files will not open in CC Photoshop. Is anyone else that has this camera experienced this problem?

    I just bought the Nikon D750 and my raw files will not open in CC Photoshop. Is anyone else that has this camera experienced this problem?
    My Photoshop says it is up to date, but I am hoping that since this camera just came out, Adobe will have an raw file update soon.

    DNG Converter is FREE.  Yes, really.  No subscription needed.
    - Baloney, NOT FREE, it's a proprietary software, not open AT ALL, see Legal Notices, so stop trying to distort the truth here.
    Camera Raw (& DNG Converter) 8.7RC has been available since 2nd October, and opens D750 files in Photoshop & Bridge (& Lightroom using DNG Converter).
    Adobe Photoshop Camera Raw 8.7 Release Candidate | digital camera raw file support - Adobe Labs
    - Still a cumbersome process for this of us that PAID for software and support, the whole point of this discussion is to implement this directly on LR, so we, the PAYING users don't have to waste time doing a useless process that could be EASILY AVOIDED ig Adobe released updates as they are needed, or if they OPENED THE SOURCE CODE so the community could do it.
    Adobe created DNG, which is a well-documented backwards-compatible format, which is free for any manufacturer to use.
    See here for manufacturers who do (it's an old list, but you get the idea):
    http://www.barrypearson.co.uk/articles/dng/products_cameras.htm
    - Really? Did you actually read the site? It has PRECIOUS information that illustrate my point: Adobe DNG is an attempt to stop the OpenSource community from achieving the goals of OpenRaw, which is TRUE OPENNESS, Again, Adobe is trying to get manufacturers to PAY LICENSING so they use a PROPRIETARY FORMAT that will HOLD CUSTOMERS on a PAID platform. OpenRaw is he answer for a true competitive environment.
    Ask yourself why other manufacturers don't use a documented backwards-compatible format.
    - Easy, because they are lazy and want kick-back. The SAME answer that I (and the entire OS community) would give if you asked about Acrobat or MS Office.
    If you use a particular piece of software as your main tool, and you buy a camera which isn't yet supported by it, it's your problem. There is an expression used in the industry:
    "Poor Planning on your part does not constitute an Emergency on my part."
    - I agree here, it's MY PROBLEM that I decided to have a better product, it was my choice. I can still use OS Tools, which will be what I do moving forward, and about that expression, that is EXACTLY why Adobe will keep loosing customers, because the sense of urgency to help who pays their bills is inexistent. You are correct, why should they rush something so simple to help a customer right? Screw the customer... Thanks for making my point...

  • A Pages file will not open due to index.xml not found, what is up with that?

    I recently saved a file on Pages 5.5.2. on my IMac hard drive.  Now I find that on attempting to open it the file will not open due to index.xml not found.  Hoe do I correct this?

    I have this issue, as well - although perhaps in a different content.  When I try to open a file I created in the previous version of Pages, I will frequently (but not always), received the "index.xml not found" message.  I am very concerned that I may lose access to some of these files.  The old Pages icon is still on my dashboard, although I've downloaded the new Pages (that icon only appears when I open a new document).  I thought I needed to upgrade the old documents to the new Pages, but this didn't work.  Does anyone have any ideas?  And, I'm not a techie - so you'll need to break it down for me. 

  • My InDesign file will not open! URGENT!

    Hi all,
    One of my InDesign files will not open, when I attempt to open it, I get a message saying "Cannot open file, Adobe may not support the file format, a plug-in that supports the format may be missing or the file may be open in another application." I'm not exactly sure what the issue is as I opened another one of my files previously and that one is still working fine. I'm using Windows 7, if anyone can help me I would really appreciate it.

    Right-click the file and choose Open With, then notepad, and post a screen capture of the first dozen or so lines of text.
    You can embed an image in a post using the coamra icon onthe web page, like this:

  • Embedded pdf files will not open

    Dell Laptop Windows XP up to date, Firefox 4.0, Adobe Reader 10.0.1
    Since updating to Firefox 4.0 certain embedded pdf files will not open forcing me to use my Internet Explorer browser to access these files. Tried all of the FAQ suggestions with no relief.
    NOTE: I can open previously opened files (Firefox 3.___) but not a new one.

    Thank you for the response. I insereted several .pdf files into my MS Word document where they show as Acobat icons. When in MS Word, I am able to double-click on the icons and the files open in Acrobat. I then converted the MS Word document to a .pdf. These icons now only show as pictures and do not open the original inserted .pdf documents.

Maybe you are looking for

  • Commitment Item-Error while posting GR

    Hi MM Gurus I am tryin to post GR without PO for movement type 101. and already customized settings for Auto PO allowed for movement type 101. When i m tryin to save GR, it is showin me error " No Commitment Item Entered in item 00010 1000 379999" i

  • Essbase, shared services, projects, users

    I have installed shared services and cnfigured it now installed essbase EAS Provider services and configured in the above mentioned manner (DID not start essbase and EAS till now) when I log into shared services....i see only bussines rules under pro

  • [BPEL 10.1.3.3] href attribute in SOAP body

    Hi, An interesting issue appeared for one of my clients. Whenever there is a "href" attribute in the xml contents of the soap call to the BPEL process, following error occurs: <faultstring>ORABPEL-04110Cannot insert attachment.The process domain was

  • Windows 2008 failover clustering fails with Event ID 1205 1069 1558

    I have a two nodes Windows 2008 and SQL 2008 cluster running in active\passive.  I was restarting my nodes after applying windows update then I received the following error message below within Failover Cluster Manager. I get errors with Event ID 120

  • Can somebody explain what is LUW ?

    Hi Gurus, can somebosy explain me what is LUW(Logical unit of work). I went through some book, but i am not able to get the concept. can somebody help me out inthis Thanks & regards Rajesh Meda