Mov files dont play smoothly even after rendering work area

HI, I have adobe premiere elements 8 and i have some mov files that were recorded on a canon camera and are around 4 gb per 12 minutes of footage. Ive exported them into premiere to edit and to export out.
I have rendered the work area of an 1 hour of footage in total which took 6 hours and then crashed. It is blurry and and jittery and so i can't edit the footage. I tried to export it and as h264 and reduced the bite rate to 7 and it hadn't even got to 1 percentage after 2 hours. I'm really not sure how to edit this or export it without loosing quality. Can anyone point me in the right direction?
thanks

When you create a new project and import the video, does it have a red line over the timeline?
If yes, your project and video do not match... and it MAY be that whatever is inside that MOV wrapper is not really compatible with version 8
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainspector.massanti.com/

Similar Messages

CS4: Video moves down after rendering work area

My video is fine before rendering work area, but as soon as it's rendered, it moves down. Anyone know how to fix this?

Here are some screeenshots.
Before:
After:

Exported flash movie is not playing smoothly

I have exported my flash project into swf format
it is not playing smoothly
Even in the test movie also it is coming like that
I have increased the frame rate to 120fps even it is coming like that
any suggestions????????
thanks in advance

Sir
In my project I have used plenty of motion tweens
actually my project is DEMONSTRATION OF IGCC (Integrated Gasification Combined Cycle) USING FLASH
I have to make effect of fluid flowing through pipe
for that I used many layers, masking, motion tweens (nearly 700 layers I used)
As increasing the number of layers in test movie as well as exported swf playing slowly
It is very slow such that my project is not effective to see
plzz help me in this
I will be very thankful to you

Panasonic .MOV files only play audio no video in Premiere Elements 11??? Not Working Help

Panasonic .MOV files only play audio no video in Premiere Elements 11??? Not Working Help

It all depends on the codec the file uses, Karli.
What model of camcorder is this video coming from?
Are you working on a Mac or a PC? Have you got the latest version of Quicktime, per the program requirements? When you started your project, did you select the settings for a DSLR at 720p? This is a vital step since it will activate the components your computer will need to work with many of these types of files.
BY THE WAY, KARLI--
PLEASE do not post the same question more than once on this forum! You've already got a thread going with this same question and several responses posted. It's very confusing when you post the same question a second time and start a whole new discussion.

I have a .mov file that plays on my mac but when someone tries to play it on a pc, they get an error 128 message. Help!

I have a .mov file that plays on my mac but when someone tries to play it on a pc, they get an error 128 message. Help! Please!

This is not the problem. We are using quicktime on the pc's and the mac. I also tried to open the file on the pc with other programs and it doesn't recognize the file. The file opens fine on my mac but I cannot save it as a new file. It says that "the end of the file was reached." The recording was made in iShowU then edited in Quicktime Pro.

I'm on OS X 10.6.8 and have a .mov file which plays on QuickTime 10.0 but with choppy video and the sound is out of sync???? File details are Video Codec: DNxHD (AVdn) Resolution 1920x1080 Audio Codec: PCM S24 BE (in24) Bitrate: 1536kb/s Solutions?

I'm on OS X 10.6.8 and have a .mov file which plays on QuickTime 10.0 but with choppy video and the sound is out of sync???? File details are Video Codec: DNxHD (AVdn) Resolution 1920x1080 Audio Codec: PCM S24 BE (in24) Bitrate: 1536kb/s. Any ideas?

Question: Is all the source footage shot in 16 bit audio or is some also shot in 12 bit?
http://docs.info.apple.com/article.html?artnum=42973
http://www.kenstone.net/fcphomepage/idvd_6stone.html
http://docs.info.apple.com/article.html?artnum=93006
http://docs.info.apple.com/article.html?artnum=303550
http://docs.info.apple.com/article.html?path=iDVD/6.0/en/397.html
http://docs.info.apple.com/article.html?artnum=61636
http://docs.info.apple.com/article.html?artnum=302925

I cant open PDF file in my mac even after updating to 10.4

I cant open PDF file in my mac even after updating to 10.4

Chrome
this is the pdf i am trying to open
http://www.cic.gc.ca/english/pdf/kits/forms/IMM5257E.PDF

Data lock even after commit work and wait

Hi Experts,
Data is still locked even after commit work and wait step has run, which made me very confusing.
The following are the details:
These steps are in a FOP.
Step1: Change Move-in Date of a move-in document in background after get the new move-date from user.
Step2: Run BAPI_TRANSACTION_COMMIT and pass the wait parameter.
Step3: Bring move-in document transaction to the user for other information changes.
After the user confirms the changes and presses SAVE button, error message shows that the move-in document is still locked. But no other transaction is opened for the specified move-doc changing.
Does any1 have any idea on this? How can I solve this issue?
Thanks in advance and points will be rewarded.
Vincent

Hi,
Normally every BAPI will work on Update task so that the data will be updated once the commit work is done. For the commit work, we will normally call the bapi function module - BAPI_TRANSACTION_COMMIT. It should work.
In your case, just try the below option:
Please call the bapi - BAPI_ACC_DOCUMENT_POST & BAPI_TRANSACTION_COMMIT in a seperate function module and call this function module in your program (just pass the import / export / table parameters accordingly).
For the information, I had once a similar type of issue and it got solved once I did like the above.
Regards,
Selva K.

Mac won't let me move files into a folder bc it THINKS there are duplicate files - but they're not

Mac won't let me move files into a folder bc it THINKS there are duplicate files - but they're not. There are hundreds of what it thinks are duplicates. How can I get it to let me put them all into a folder and create unique names? If I do one file at a time, it gives me the option to keep both files. But not when I am moving hundreds at a time.

A reply to an old problem, but I couldn't find this solution anywhere. I had the same problem when I moved my iTunes library to an external drive. As Apple recommends, I used File > Library > Organize Library > Consolidate Files to copy my music files from my overstuffed hard drive to the external drive. Copying went fine for a while, adding about two-thirds of my files to the new drive without incident. Then I got the big stop sign with the error message: "Copying files failed. The disk could not be read from or written to."
This turned out to have nothing to do with either the hard drive or the external disk. I had a bad file in my music library that was shutting down the consolidation process. Unfortunately the error message says nothing about which file may be the culprit. All I could think to do was to go back to my original library in iTunes and sort by Artist, select all cuts with artists beginning with A, right click and select "Consolidate Files". Then do the same with B artists, etc. Proceeding this way, files resumed copying but when I got to the "S" selections, the consolidate process failed again. Then I selected smaller and smaller batches until the problem file was identified. Removed it from my library and then Consolidate worked fine through the rest of the library. Problem solved.
I spent several days working through this; hope I can save someone else the time.

Crashing when "Rendering work area" ?

I worked on a few sequences adding Chroma Key effects (superposing images / video shots).
Following the 'Adobe Premiere CS3 Bible', I finalized by doing : Sequence / Render Work Area, but close to the end of the process, I got two error messages ("Adobe ... encountered an error..." and the program crashed (offered nothing but to close). Fortunately, I had saved the work so when returning, everything seemed to be there as left (with effects).
To bad I did not take time to note the messages (and chosed ''Continue", as an available option).
1) What is the real use (and difference between this and the simple "save" command) of this "rendering work area" ? (Can I slip over this step ?)
2) Any know issues I should look for here ?
Thanks,
Rob

See the section
About previewing sequences in the PPro CS3 Help, to understand what rendering the work area does.
Saving simply saves the project information, not the video information.
You will also find links to many
free tutorials in the PremiereProPedia that will quickly show you how things are done in Premiere Pro.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

How to queue movie files to play after each other?

Hi,
I have home movies that I want to watch continually. I'm sick and tired of clicking on each file and playing it. I'd like to queue a selection of movies and just let them run one after another.
HOW do I do this? Help please!!
Thanks,
Chris.

A web search hasn't revealed any immediate obvious answers, suggesting queueing is not a feature QT (maybe different in the Windows version).
I am only familiar with the cumbersome method as outlined in [http://www.ehow.com/how4453086present-multiple-movies-same-quicktime.html] where you copy (if only temporarily) multiple movies into one long movie.
Use something like http://niceplayer.net/ , or as I said, iTunes should be able to do this in a playlist since it is the .mov format.
Message was edited by: Limnos

Can't get Quicktime HD movie files to run smoothly on my iMac G3

I've got a slot loading imac crt/ G3 933mhz 596mb of ram; and updated it to tiger and quicktime 7 pro. Everything was fine. I marvelled at HD quicktime movies and videos in iTunes, but all of a sudden, any new hd files I download from iTunes or the quicktime site won't play smoothly. I found a shockwave file doing the same thing. It's as if my broadband has suddenly gone 56k. I know this isn't the case because I plugged my laptop in to the modem and it's fine. Has anyone else had a similar problem. Perhaps my processor and graphics card can't handle the latest quicktime software. The problem doesn't happen with audio files, and also stll happens to video files after they've completed downloading. The puzzling thing is it was fine until I tried to view previews and trailers in the iTunes store.

Newer H.264 encoded video requires more computer power (and a good video card).
Our G3 machines just can't keep up. Even most of Tiger's "eye candy" will not display on your G3.
Avoid QuickTime content that says "HD" in its name or uses H.264 video. Nothing is wrong with your older iMac. It's just under powered.

Nikon D7000 .MOV files in Premiere Pro and After Effects CS5.5

I recently upgraded from Production Premium CS5 to CS5.5. Initially Nikon D7000 .MOV files used in previous CS5 Premiere Pro project would not play well in CS5.5. Now .MOV files do work in both PP and AE CS5.5. Here are the steps I followed. Not recommending you follow my steps exactly, just providing info for those that are interested.
1.       Launch Premiere Pro CS5.5 and open previous PP CS5 project, convert project to CS5.5 and rename project file as not to replace previous CS5 project file.
a.       At this point .MOV files do not play in new project or in AE CS5.5
b.      Close Premiere Pro and After Effect if still running.
2.       Using Adobe Bridge CS5.5, batch rename;
a.       Make copies of original files to new folder location while renaming file extension from .MOV to .mpg
b.      Let Adobe Bridge finish creating all new thumbnail previews.
c.       Leave Bridge running in background.
3.       Launch Premiere Pro CS5.5, let Premiere finish recreating thumbnail previews if needed.
a.       Attempt to preview existing .MOV file in project. It worked for me.
b.      Attempt to play sequence containing .MOV files. It worked for me.
c.       Attempt to play or modify sequence .MOV files in AE CS5.5 via Dynamic Link within Premiere. It worked for me.
d.      Close Premiere Pro project and AE projects if open.
4.       Create new Premiere Pro project and sequence
a.       Import a different Nikon D7000 .MOV file not previously used or renamed.
b.      Attempt to play this newly imported .MOV file. This worked for me as well.
c.       The new, previously un-renamed .MOV file also worked in AE CS5.5 for me.
I will perform additional tests but at the moment Nikon D7000 .MOV files are working for me in CS5.5 after initially performing a batch rename in Bridge CS5.5 from .MOV to .mpg and letting Bridge create preview files. Even .MOV files not renamed now work.
An example of Nikon D7000 footage edited with Adobe Premiere Pro CS5.5, After Effects CS5.5, and Sound Booth CS5 can be seen on my blog, http://stevelandonsmyth.typepad.com/steve-landon-smyths-blog/2011/07/my-first-hd -video-shoot-with-nikon-d7000.html
My system: MacBook Pro 17" 2.3 GHz i7 quad core, 8GB RAM, 500MB SSD
Message was edited by: Steve Landon-Smyth

Hello,
I see 2 post in this thread from Todd that say they are working on a fix and it should be out soon. One is from July, the other from August. It is now Sept 7th and I still see no patches or fixes for any bugs. I spent 400 dollars on an upgrade, but is this upgrade going to be supported?
This is making me rethink upgrading to the .5's in the future.
It is a minor bug to most, but in that sense it should be an easy quick fix. Am I wrong? Is this really a complicated issue?
I apologize if this comes off like a rant, but thats kinda what it is. It is not hard to batch rename files, but its a pain to have to relink all those files in PP.

No Audio In After Effects CS5.5(Even after rendering)

I currently have the After Effects CS5.5 Trial Version installed. I am running into a bad audio problem. For the first 2 days I have used it, the audio was fine, it played automatically and I didn't even have to render first to get it. Then, the third day, I got on that day and the audio jsut flat out didnt work. I did look it up on the forums and google, and nothing helped. I have tried rendering(with audio), using different video files and clips, and even reinstaling the trial. Nothing worked. The RAM Preview plays sound fine, and when I double-tap "L", the soundwaves do show, and they are accurate when played on the preview. I have tried WMV, AVI, and mp4 files, none of which have worked. I can edit and add effects and import picture and other files fine, but the audio simply doesnt work. I can't get audio by playing it normally.
I know it is not usual to ask questions about the trial, or to even have them answered, but this is important because I want to buy After Effects CS5.5, and before I do, I need to know if this is a computer problem, or if I did something to mess up the program, or if there is even a way to solve it. I don't want to buy it and realize I can't even use it with audio for some reason.
P.S. I am fairly new to this, so if you blast me with some complex, in-depth instructions, please try to make it rather simple, or just explain it well.
Thank You and sorry for the inconvenience,
Chris Madaras

> I can't get audio by playing it normally.
You said that audio played when you used RAM preview. That is how you play audio.
See this:
"FAQ: How can I play or preview sound (audio)?"
...and this:
"FAQ: Why is there no audio (sound) in my output file?"
Since you're new to After Effects, I very strongly recommend that you work your way through the materials here:
"Getting started with After Effects"

Problems Playing .mov files in Play

Hi All.
I have made a short movie from a LiveType template, and converted it into a regular Mov file, which I have subsequently placed into the first slide of a presentation. This is something I have been doing ever since Keynote came out. Now though, after a few Plays/presentations have run through, the movie stops and stutters and starts and stops. I have tried to find out whether this is a LiveType issue, a QT (latest upgrade) issue, and now Keynote. Whatever issue it is, the fault appears on ALL my Macs which are both Tiger and Leopard -powered - so I know it is not an OS X issue nor a machine issue.
Has anyone else come across this? I have done all the usual tricks and have even re-produced the movie file from scratch, which worked beautifully for the first few presentations, and has now decayed into bad form, just like all the others before it.
It really is quite frustrating so any thoughts from out there would be gratefully received...
Cheers
Chris
Message was edited by: ChrisRR

Hello all, it took me all morning but here is what I found out. When I have the quicktime movie in my last slide and the slideshow is set to loop then the quicktime movie plays for a couple seconds and then stops. If I deselect the loop feature, then it plays fine. So instead of having the video in the last slide I added another slide after it and guess what it works.

Mov files dont play smoothly even after rendering work area

Similar Messages

Maybe you are looking for