Move graphics with text--but not inline--in PM...??

Hello, is there a way in PageMaker to move graphics with text but not inline? I ask because right now I see two options for graphics:
--inline, so you cannot place the graphic exactly where you want AND the text only flows way above or below--but not next to--the graphic
or
--independent so you can place the graphic exactly where you want and the text DOES flow right next to the graphic, but then the graphic doesn't move with the text
I'd like to be able to place graphics exactly where I want AND have them move with the text, like the "Move object with text" option in Word.
thank you!
L

well it has been a while since i used PageMaker so i didn't realize it was "dead."
though i'm not surprised and am kind of glad. i was hired into a new job recently
to work on a department newsletter, and i'm trying to find a good authoring program
within our budget. right now the newsletter is in Word but we've had a lot of problems
with Word so i'm seeking an alternate solution. i'd like Frame but again there isn't
enough money in the budget. i need a good option that is $500 or less...i'm trying Publisher
now too but not enough functionality...

Similar Messages

IMessage only can send text with photo but not text only

How come my iMessage can only sent text with photo but not text only. While entered text the send button is blue and gray.the button could become blue and white when only photo was being inserted. My iPad 2 iOS version 5.0.1.

Went apple store today, everything is fine. Out of the store I have the same problem as disrobed above. Can anyone help?

TA25361 I have a ton of documents and databases in AppleWorks v 6.0 that I can no longer open on my MacBook Pro. Is there any way to recover this info? Some documents can be opened and resaved with textedit, but not my database with all important addres

I have a ton of documents and databases in AppleWorks v 6.0 that I can no longer open on my MacBook Pro. Is there any way to recover this info? Some documents can be opened and resaved with textedit, but not my database with all important addresses.

I tried Peggy's List > Select All > Copy > Paste into an AW spreadsheet suggestion.
In my case, pasting into the spreadsheet lost all text formatting (mostly text set to bold). The results of formulas were pasted, and checkboxes were pasted as "on" or "off". The DB did not contain any pop-up menus or radio buttons, but I expect they would transfer as a number showing the list position of the chosen item.
Pasting the copied List view data into a Numbers table gave a result similar to that with AppleWorks. I selected B2 as the target cell (for top left cell of the pasted data) to avoid any effects of posting into a header row or column. Bold and regular text formatting looked the same as it had in AW's List view.
Based on that, I'd slip the 'paste into an AppleWorks Spreadsheet step, and paste directly into a Numbers Table.
Regards,
Barry

ITunes opens but without any text showing. Drop down menus have text but not the app itself. I have a Mac Powerbook Pro running Windows XP under Boot Camp.

Running under Windows XP, a few upgrades ago iTunes started opening without any text showing in the application. Clicking on PLAY will play music but no text shows to indicate what's playing and no text to show music library. Drop down windows show text but not the app itself.
Subsequent upgrades and reinstalls have not corrected the problem, When I run under iOS (Snow Leopard), iTunes opens with text and runs correctly.
Help!

Because I created FAT32 partition using Boot Camp tool few days ago I installed my custom copy of Windows XP with SP3, IE7 and WMP10 integrated using nLite (for WMP10 integration use RVM Integrator). I did not use Boot Camp tool this time - I just booted CD using Option key. Then I installed Boot Camp 2.0 drivers you can find on Mac Disk 1. After this I installed Boot Camp drivers 2.1 update. In Add or remove Programs I checked drivers - I uninstalled old drivers which call identical, but you can skip this. Everything works fine BTW it is better to format your partition to NTFS - you have much less disk errors, you do not waste time for disk errors scans during Windows startup, your data are much more safe. If you need NTFS write permissions use great tool Paragon NTFS for Mac OSX or open source NTFS driver.
Message was edited by: limo79

HP D110 AIO printer. Prints jam when printing with wireless, but not when hooked to USB cable! HELP!

I have a HP D110. It jams the paper when I print with wireless, but not when I use USB cable. Any ideas?

From what you describe you are having issues printing from MS Office. Have you had trouble printing from other resources on your computer (e.g. from the internet or another program)? The first thing I am going to suggest is that we start by uninstalling and reinstalling the printer from the resources available online.
First if you use a USB cord, make sure to remove it (this is important). Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer.
In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it.
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3562006&lang=en&cc=us...
Install that and let me know the result!
Have a great day!

IO assigned with Asset,but not coming at the time of PO creation

Hello
IO assigned with Asset,but not coming at the time of PO creation.
I have made following settings:
1     Depreciation - IFRS (INR)              1     0L
15     Income Tax Act                             0
20     Depreciation - Indian GAAP (INR)     3     1L
30     Depreciation - IFRS (USD)              0
31     Depreciation - Indian GAAP (USD)       0
In ACSET-Account assignment:
for dep area-20
CAUFN     Internal Order     *     Generic Trans. Type     02 Depreciation Run
KOSTL     Cost Center     *     Generic Trans. Type     02 Depreciation Run
so currently i am using only dep area-20 only(Indian GAAP)
CAPEX budgeting is through IO. AUC is not doing through IO,its directly from AIAB/AIBU
AS01
KO01
AS02
KO22
KO30
so what is the problem,why i am not getting IO (which is in display mode in PO) when assigned the Asset with category of "A" (asset) in PO.......when i assigned Asset- the GL account come automatically but IO didn't come.
kind regards

Hey Ajay
thanks for your reply.....
now i'm getting new error:
Parallel depreciation area 31 is not posted
     Message no. AA565
Diagnosis
     The asset to be posted does not manage parallel depreciation area 31, or
     transaction type that you are using is limited to certain depreciation
     areas, and does not contain depreciation area 31. This is incorrect.
System Response
     Posting is rejected.
Procedure
     Check the asset and the transaction type.
I have checked some configuration but not able to debug it.
regards

Why does the FP 10 work with firefox but not with IE8

I down loaded the folowing for xp FP uninstall, FP plugin and FP debug from the link in one of your replys. now I can watch youtube with firefox but not with IE8. you asked me before if i was using 16 bit. whats that mean and how do I find out? please help I just want to watch youtube on IE!

Ok Shag, since you hadn't been on a Forum before, then I'll take some of what I said back:-) I wanted you to stay on one thread, you can get in trouble trying things that may cause you more problems than you had in the beginning. I just had your best interest at heart
I'll even overlook your all caps here:-) At least you responded
Now since you say you fixed it, what you should do is to confirm it is fixed by taking a look at your Flash folder. This contains all of the Flash files for IE and FF. Then make sure you have the IE add on and the FF add on. That way if you have any future problems, at least you would know it is not the Flash Player.
You should only have 2 .exe files for IE and 1 for FF.
For Video editing, I would check Microsoft and see what they have. Perhaps someone else will come along with other info for you.
No, I don't get paid here, since I am not an employee. Just a user helping others, since I had a problem at one time and after 4 hours of researching solved it.
Let me know if you want to check the Flash files.
Thanks,
eidnolb

Playing movie on tv; playing but not showing up; what output, DVD?

1st time trying to play movie on tv; playing but not showing up; do I need to change output? Only DVD & DVR shown. Thx

You need to provide more information. How are you connecting your iPad to the TV. Are you using an Apple TV 2, a component AV cable, a composite AV cable or the digital AV cable?

Tomcat gives 404 with Netscape, but not IE

Why would I get a 404 for an application with netscape but not with ie?
I am using Tomcat 5.5.
Is there something special that I need to do for each browser?
Thanks in advance
Burt

Why would I get a 404 for an application with netscape but not with ie?
I am using Tomcat 5.5.
Is there something special that I need to do for each browser?
Thanks in advance
Burt

How do i delete files in pages, i have some old invoices in pages that i want to delete, i can delete the text but not the whole file, please help. Dennis

As it say's above i need to delete some of my oldinvoices/estimates from my files in pages, i can get rid of the text but not the whole file, thanks Dennis

You locate the file in the Finder(it's in the Documents item of the sidebar by default), drag it to the Trash, and empty the Trash.
(59926)

I get sound from Youtube with Safari but not with Firefox

I get sound when using my MacPro with Safari but not with Firefox.

Did you check the volume setting in the player to make sure that the sound isn't muted?
You can try to clear the Flash local storage.
Flash Website Storage Settings panel:
*http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html
Flash Local storage settings Help:
* http://www.macromedia.com/support/documentation/en/flashplayer/help/help02.html

My bank id works with IE but not in Firefox, even if I run without extensions. What is the problem?

My bank id works with IE but not in Firefox, even if I run without extensions. What is the problem?

Make sure you are using the correct user name / password.
https://support.mozilla.org/en-US/kb/firefox-cant-load-websites-other-browsers-can
https://support.mozilla.org/en-US/kb/secure-connection-failed-error-message

I am travelling for a year. I have my iPod touch 4g with me, but not my MacBook. Is there a way I can update to IOS 5 without losing my music,apps, photos..

I am travelling for a year. I have my iPod touch 4g with me, but not my MacBook. Is there a way I can update to IOS 5 without losing my music,apps, photos..

Yes. get a computer with iTune 10.5 and:
- Transfer iTunes purchases to the computer:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
- Transfer other stuff using a third-party program like one of those discussed here. Most are good for music. It is harder to find one for other stuff like synced photos.
Copy music from Ipod to new computer...: Apple Support Communities
- Connect the iPod to the computer and make a backup by right-clicking on the iPod under Devices in iTunes and selecting Back Up
- Restore the iPod from backup and sync as neccessary.

I have to open website which opens only with google but not from safari. how can i get such google?

i have a website which opens only with google, but not google from safari. how i can get google w/o using safari?

From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the errant extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support.

HT201412 my apple ipad is disabled and saying connect to itunes. i tried to connect with itunes but not responding

my apple ipad is disabled and saying connect to itunes. i tried to connect with itunes but not responding

Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/ht4097

Move graphics with text--but not inline--in PM...??

Similar Messages

Maybe you are looking for