Move mail preview pane

New MacbookPro user here, after all these years of considering it.  I want to set the external Thunderbolt display as primary, with the icons, and the laptop screen wouild just be its extension, essentially blank. Not mirroring both displays. I had it once but now cannot get it back that way.

Hi michaelayres,
Welcome to the Support Communities!
I believe you are asking about Extended Desktop mode.   The article below will explain how it works:
How to use multiple displays with your Mac
http://support.apple.com/kb/ht5019
Cheers,
Judy

Similar Messages

  • Mail preview pane

    Hi,
    Can someone tell me how to get the preview pane bar back please?
    I'm using Mail 2.1.1 and lost the preview pane earlier today. Everything I'm reading online says there should be a bar with a circle on it under the list of emails, which can be clicked or dragged to restore the pane.
    I haven't got this on my Mail window, all I can see is my list of email's disappearing off the bottom.
    Can anyone help please..??!
    Cheers,
    Dave
    MacBook Pro   Mac OS X (10.4.8)  

    You’re welcome.
    Yes, re-creating com.apple.mail.plist would be the next thing to try here -- maybe there is something wrong with the setting that determines where the bar should appear. Proceed as follows:
    1. Quit Mail if it’s running.
    2. Make a backup copy of the ~/Library/Mail folder, just in case something goes wrong while trying to solve the problem. You can do this in the Finder by dragging the folder to the Desktop while holding the Option (Alt) key down, for example. This is where all your mail is stored.
    3. In the Finder, go to ~/Library/Preferences/. Locate com.apple.mail.plist and move it to the Desktop (to be deleted if this fixes the problem).
    4. Open Mail. You’ll have to set up your non-.Mac accounts from scratch all over again. If given the option to import existing mailboxes or something like that, don’t. Just enter the account information and Mail will automagically rediscover the data in ~/Library/Mail/ when done.
    You’ll also have to re-configure most of your settings in Mail > Preferences. For spam-related security reasons, the first thing you should do is go to Preferences > Viewing and disable Display remote images in HTML messages if it’s enabled.
    5. As a side effect of re-creating com.apple.mail.plist, Mail might rename Outbox (which is where messages waiting to be sent are stored) to Delivered. The name of that mailbox is actually a misnomer, as it would contain messages (if any) that couldn’t be delivered for some reason. You can delete that mailbox if you wish.
    Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. You can easily locate any of the folders referred to in this post by copying the folder path here, doing Go > Go to Folder in the Finder, and pasting the folder path there.

  • Mail preview pane filling up with unnecessary info !

    "Crossed over" to Macbook and loving it, but... having set up Mac Mail with my Gmail account, I find that the preview pane for each message has dozens of lines of routing information before it gets to the actual email content. For example, 10 lines headed "received"with info about SMTP etc, authentication details and all that kind of stuff. So much so that the message itself ends up below the bottom of the screen, which kind of defeats the purpose of a preview pane. Any suggestions???? I would really like to resolve this as I started out using Entourage and found it kept freezing when I attached files to emails, so it would be nice to find some part of the Mac system that works as efficiently as Outlook on my old Windows PC - not that I am nostalgic for it!!!

    Hi timinbrazil & welcome to the forums.
    I see those when I have 'Long headers' enabled in the 'View/Message...' menu - toggle off to hide.

  • Mail preview pane will not scroll down long messages.

    using mail 3.6
    i use the preview pane to view all my messages. when attempting to scroll down a longer message, whether using the arrow keys, arrow buttons, or scroll manually, mail will "pop" the message back to the top. if i double click the message and open it in a separate window, the same thing happens.
    even if i stay on a message, and allow all content to load, mail will still pop back to the top of the message.
    i looked through a couple of forums, and didnt see this exact dilemma, so please excuse if it is addressed elsewhere.
    any ideas?

    Mac OS X: How to quit an unresponsive application using Force Quit

  • Apple Mail - Preview Pane - No Preview

    Ladies and Gentlemen:
    Apple Mail developed a strange behavior.
    Neither in the preview pane nor when you double click the mail the content is visible.
    Why is this? How can it be repaired?
    Thank you very much!
    Kind regards
    Dieter Zakel MD MA

    Are you aware of the following support advisory:
    http://support.apple.com/kb/TS2537
    Do you have any Mail viewer window? From what version of OSX did you upgrade to 10.5.6 from?
    Ernie

  • Mavericks & Mail Preview Pane

    I just downloaded OS X Mavericks and now in Mail the preview pane is on the right side not the bottom like how it previously was. Is there anyway to put it back at the bottom without changing it to Classic layout?

    Hi jrdalvi, did you ever figure out how to get it back? I just did, I used your trick to get back the classic preview on the bottom by clicking classic layout. Then I unclicked classic layout and you'll see a small bar on the right hand side, place your cursor on it and you'll see a small arrow, simply drag it to the left and the preview will appear.
    Stefano

  • Why does Apple Mail preview pane display only sender's first name?

    Some, but not all, of the mail I receive shows only the sender's first name in the preview pane. I've checked the three areas others have mentioned as possible sources of the problem: 1.) Both first and last names appear for these senders in my Contacts. 2.) None of these senders appear with only first names in my Previous Recipients list. 3.) The full headers don't show first name only.
    When I used Entourage, emails from the same senders never showed only first names in the preview pane.
    Is this a bug in Apple Mail? Is there a workaround?

    I came here looking for a similar answer. Some of my HTML messages show up just fine in Mail 3.5. Others, I get the plane text alternative or a bunch of raw HTML. With no answer in sight on the Discussion groups, I decided to look at the raw mail message of one of the offending emails.
    Under the View menu I found a sub menu called Message then there are 6 choices beneath that:
    *Long Headers*
    *Raw Source* (which is what I was looking for)
    +(and then below a separator I found a surprise!)+
    *Plain Text Alternative* (grayed out)
    *Previous Alternative* (grayed out)
    *Next Alternative* (available)
    *Best Alternative* (available)
    Only the appropriate ones for the current message display format are available.
    So low and behold selecting "next" or "best" changed my message into fully readable HTML format with pictures, formatting, etc.
    I am assuming that something in the way that the multipart MIME message is assembled by some senders' systems does not sit well with Mail. I'm not going to bother figuring it out, but I'm sure that close examination of the raw message would give some clues.
    Now if only I could figure out how to choose the message format based on the sender, I could eliminate having to change every message that comes in from that sender. Maybe AppleScript and a Mail Rule?
    Message was edited by: sjmvideo

  • Leopard Mail Preview Pane

    In Tiger, the preview pane for mail was made into columns. First the mailboxes, etc, then the mail, then the preview pane. Now, in Leopard, the preview pane is below the list of emails. I prefer the former. Any idea how to change it back? I've looked in preferences, view, window and can find no answers. Also, no one else has posted anything about this that I could find.
    Am I that obtuse or am I the only one who cares?
    Please help.

    This was never the default view (the preview pane has always been below the messages by default), so you must've had a plugin installed that allowed you to change it. As suggested in another reply, take a look at Letterbox and, if that doesn't work, WideMail.
    http://www.daneharnett.com/widemail/

  • How do you move Mail, Preview to second monitor?

    This is probably a dumb question... I have a second monitor connected to my Macbook Pro. I can move Chrome and other programs to second monitor by dragging them there. I'm unable to drag Mail, Preview to the second monitor.....
    What am I doing wrong?

    Do you mean ---
    To a second monitor, or to a third, "grade" monitor?
    How "most" people are doing it... among the now 1.4 million licensees of FCP, I can't really comment. I don't think there are that many grade monitors in use, fewer users of even external monitors. For two-monitor setups, the use of a 2xDVI GPU is the way to go, but the video is NOT conditioned for broadcast display, at least up to this version, and not likely to change until Snow Leopard, when the 1.8/2.2 issue is rumoured to be addressed.
    The preferred method that was envisioned by the engineering team was to use an AJA or Blackmagic AV-SDI interface, so that all the up/down/cross gamma and colourspace and framerate and resolution issues could be taken care of by somebody else.
    There is a landslide of opposition to this because "proper monitors and video interfaces are too expensive". So "many" people gaff-tape and Rube-Goldberg "less expensive" solutions using computer graphics displays. They run into a lot of problems, not restricted to, for examples, an inappropriate contrast ratio, non-standard spectral response, and incompatible third-party color profiling which completely garbles the output.
    It is an extremely complex problem. At the moment only SDI is supported, FireWire will likely never happen as it doesn't have the bandwidth to be useful.
    jPo

  • How to I remove the 'panel' underneath the Header list, and above the mail Preview pane. Contains 'from' 'subject' 'reply' buttons to name a few. Takes up too much space.

    How do I remove the 'panel' underneath the Header list, and above the email Preview Pane. Contains 'from', 'subject', 'to', 'reply', 'forward' buttons to name a few. Takes up space.
    == This happened ==
    Every time Firefox opened

    setSize (600, 200);orpack ();Kind regards,
      Levi
    PS:
        int i;
    parses to
    int i;
    , but
    [code]    int i;[code[i]]
    parses to
        int i;

  • I have a new imac27 how do i increase font or text size in mail preview pane

    i want to change text size in my mail in safari on mountain lion the prevail pane is to small for me im new to mac

    I'm confused. Are you using the Mail application included in OS X? Or are you using the Safari web browser, and if so with what email provider?

  • Outlook 2013:Possible to remove/edit layout header in mail preview pane?

    I get many hundreds of emails a day. I need to glance quickly at the first paragraph or so of an email.
    Can't do that, because the top of the reading pane is 100% NOISE (reading pane at bottom). It's an oversize repeat of what is in the email list, and, on smaller screens, blocks 100% of the email message. If I want to see a picture, and all the other
    extras, I can open the email. In 99.9% of all my emails, the picture is a placeholder anyways.
    And if you click on it to try and scroll it, you mostly get the empty placeholder social crap to pop up, causing even less efficiency, as you try to get it closed. Seems to be designed for light, casual use, not for IT professionals.
    So, can the layout be edited? Nothing that I can find so far.
    Rick Hantz

    This is driving me crazy too! Enough that I have wasted an hour of business time to try and find a solution. For some, this may be a casual social application. But, for everyone I know it is a business application. For those of use that want "information
    at our finger tips" an option for a compact header would be great. It's too bad we can't edit the entire header display.
    Perhaps the dev team could offer us a header view dropdown that offers none, compact and social.
    So far I have been disappointed with the general design of Outlook 2013. All of the office tools are used by myself and my peers as business tools not casual social media interfaces. An application should be designed of it's audience and not driven by trends.
    Additionally, I also agree with all of the messages I have read on the internet complaining that the flat grey look is not easy on the eyes; perhaps distracting, possibly wasting productivity time. I have make sure my laptop screen is positioned just right
    so I can distinguish one thing from another. I have tried the limited grey color choices.
    Lastly, is there a way to stop the scroll bar from popping on and off as I go back and forth from the Outlook folders and the list of messages pane? I have a lot of folders and a lot of messages. Aside from
    the visual annoyance of it's flashing on and off, it is annoying to not know where my scroll bar handle is when I am moving my mouse into the folders pane. I would prefer just to have it on at all times.
    Thank you, Bob
    Bob Moyers

  • Preview pane and email view problem

    Hi  since installing the latest software update I no longer have the option to have my preview pane on the RHS as I prefer nor do I have my inward emails separated by blue lines as before also. I have tried the plugin fix but no joy. What next??

    Hi Charlie
    Thanks for the quick response.
    I am using OSX snow leopard  version 10.6.8.
    I have no line separation for the e mails and I have double clicked everywhere on RHS and no luck. The only place I can double click is between the e mail messages and the bottom preview pane and this simply removes the preview pane altogether or brings it back again. However it does allow me to move the preview pane to the RHS as I had before the software update. Make you wonder about these updates sometimes. Any way I hope you have an answer for me on these two problems. Thanks Charlie.

  • Preview pane looks strange

    I just installed Adobe CS3 and as soon as it was installed, my mail preview pane looked odd
    you can see a screen shot here
    http://farm3.static.flickr.com/2015/234086525988d8bf5dceo.jpg
    Message was edited by: MakFish

    This is a font issue. You’ve probably either disabled or removed a font that Mail needs to work properly (e.g. Helvetica):
    Font Management in Mac OS X Tiger and Panther

  • Moving Mail Message Preview Pane to Right of Screen Like in Entourage

    Hello,
    Would anyone be able to tell me if I can move my Mail Message Preview Pane to the right side of the screen like I can do in Entourage? I prefer the message preview screen on the right side instead of at the bottom as is the default in mail.
    Thanks,
    Ppsychling

    Ppsychling,
    Unfortunately, that is not an option. The only choice that the user has regarding the Preview Pane is to show or hide.
    Your valid feature request should be made through Mac OS X Feedback.
    ;~)

Maybe you are looking for

  • Problem with JavaScript in DPS

    Hello, i have little problem with one HTML page in DPS. We've created HTML form, which is formatting output with JavaScript and then passing to local mail client via mailto. It works nicely in Safari on desktop, it works in Safari on iPad BUT it don'

  • How to use the ColumnDescriptor's type as CLOB?

    I want to build a metric which are used to record the content of a file. But the length of the content is too long, it may not be stored with a ColumnDescriptor's type STRING. I tried to make the TYPE='CLOB', but failed. I though it might be somethin

  • Popups are not displaying in ie and safari

    Hi everyone, I have an FTP application(exported from fb 4) running within a website I'm currently developing. It's a client login area. They login, are then presented with folders in an ftp client box with folders relevent to their login shown. All a

  • Only one PR should be created for 3 months requirement.

    Dear All, In MRP run only 1 PR should be created for three months rquirement , Eg: The procurement is done only once in 3 months, means PO is raised only once in 3 months for a material. So now system should create only 1 PR [1 lot] for 3 months requ

  • Regarding wlss work managers

    I am using WLSS 3.1-MP1. I have couple of doubts regarding work managers wlss.timer & wlss.transport. 1. Minimum Threads Constraint : Weblogic documentation says "+The minimum number of threads allocated to resolve deadlocks+". Does it mean that thes