MOVED: Does MSI E350IA-E45 support AMD virtualization?

This topic has been moved to Linux/Unix.
https://forum-en.msi.com/index.php?topic=153096.0

Thanks for pointing me in the right direction!
It has a Realtek RTL8111E lan controller, which does support WOL.
Willie

Similar Messages

Does MSI B85M-E45 support 4K UHD Support? - which is correct???

I want to know if the MSI B85M-E45 motherboard supports 4K UHD ? (3840 x 2160 resolution).
When I read the overview of the MSI B85M-E45 motherboard it says it does supports it (it is mentioned in two different places)
However, when I see the 'detailed specification' it says the following :
1 x HDMI port, supporting the maximum resolution of 4096x2160@24Hz, 24bpp 2560x1600@60Hz, 24bpp 1920x1080@60Hz, 36bpp
So why don't they mention 3840 x 2160????
Can someone at MSI clarify the situation??? Why don't they mention it?? Which is correct on of them must be wrong?
I need 3840 x 2160 at 30Hz on the HDMI port. This is to support a UHD monitor.
This site, wont' let me post links to MSI own web site!

Quote
Quote
maximum
resolution of 4096x2160@24Hz
So anything less than that should be covered... It wasn't a list, just maximums.

Gpu core clock low msi e350ia-e45

I'm been running into a problem while bitcoin mining.
I noticed that when I moved my MSI e350ia-e45 setup into my computer room that the Mhash/s starts off at 11.2 then drops to 4.3 after a couple of minutes.
The previous room was about 66F ambient temps, the new room is about 75F.
I downloaded msi afterburner and noticed that when my Mhash/s drops, my gpu core clock speed drops to 200mhz from 492mhz.
This happens when the gpu hits 60c-61c.
I was running catalyst 11.6 and then tried 11.7 with the same problem still.
I've upgraded the bios to the latest 1.5 and still no fix.
I've tried disabling cool n quiet in the bios.
I upgraded my case cooling.
I added thermal paste(which is why it changes in minutes rather than seconds now).
Still no luck.
This is a little bit of a let down as I also own a C-50 based netbook that does not exhibit this behavior. It will happily run at the 278mhz gpu core clockspeed past 80c.
The e350 is rated up to 90c so why would it underclock the gpu at 61c?
My friend has an asus e350 board and in my room it doesn't underclock the gpu. His runs at a steady 78c in here.
I can only think that it is a bios issue.
Any idea's?

I moved it back to the other room with the lower temps and the issues vanished. Too bad it can't stay in that room(the ethernet connection to that room travels through the outside and is prone to killing switches/routers/ethernet cards during lightning storms.
I guess it's not much of an issue, but the whole reason for buying an e350 was the higher gpu clock rate compared to the c-50. It's kind of pointless if the gpu drops down to 200mhz when slightly heated. It makes my c-50 netbook much faster than the msi e350 motherboard.
I love the motherboard, and all it's features, except for the clock problem.
I'm still hoping it's a software issue and not a bios issue.
I'll try installing an even earlier version of catalyst.
I will be installing linux to see if the problems persist.

MSI E350IA-E45 HDDs supported

Hi,
I need to know if the board 'E350IA-E45' supports 2TB or 3TB Hard Disk Drives ?
Thanks.

Quote
no reason any 3gb drive should not work if those do
Dito.

MSI E350IA-E45 gigabit LAN problem

Hi there, I'm having some problems with my gigabit connection on my MSI E350IA-E45 rig.
I'm using a D-Link DGS-1005D Gigabit Desktop Switch and my other PC hooked up to it has a 1000mbps connection while the connection on my E350IA-E45 rig is stubbornly on 100mbps connection.
I have already installed the latest Realtek PCIE LAN driver from the product page (release date 2011-06-02). Is there anything else that I missed? Maybe a BIOS issue of some sort? Would appreciate any advice on this matter.
(btw, I'm running 64-bit Windows 7)
Thanks

To answer your question between Cat 5e and Cat 6.
It's the bandwidth that they have:
Cat5(e) - 100MHz - 100BASE-TX & 1000BASE-T Ethernet (e-version is just a bit better tested, nothing more)
Cat6 - 250MHz - 1000BASE-T Ethernet
BUT, CAT5(e) can only be used with 1000Base on short lengths, upto 15 meters however it's not sure it works at all.
I use CAT5 between 2 1000Base switches and it does 30 meters with ease, but switches are less sensitive then a single networkcard or between cards.

MSI E350IA-E45 Entering Bios

After having pressed the Del key during booting up - the computer hangs with "Entering Setup" shown in the bottom left of the screen.
* The problem was orignally found with the 1.0 version of the Bios but remains after upgrading to 1.5. With both versions the Bios was cleared with by switching the JBAT connector.
* Memcheck86 has been executed and reports no error.
* Attempts have been made with the SSD and BR drives detached with no joy
Setup is as follows:
1 MSI E350IA-E45, AMD E-350
Mini-ITX, Hudson M1, DDR3, 1xPCIe(2.0)x16, SATA 6Gb/s, USB 3.0, VGA,
HDMI
1 Crucial DDR3 1066MHz 4GB KIT, CL7,
Kit w/two matched DDR3 2GB, 240pin
1 Corsair SSD Nova Series™ V32, 32GB
SATA2, 2,5", 195MB/70MB/s read/write, incl 2,5" to 3,5" bracket
1 Lite-On DVD±RW/Blu-Ray Reader, IHOS104
SATA, 4x BD-ROM Read, DVD±R: 12x, DVD±RW: 8x, Bulk, BLACK
1 Ace Polly Mini-ITX Svart
Fan: 1x 80mm Back, 150W PSU, mITX, 18 dBA, 2x SATA, 2x USB2.0, HD
Audio

Well, Ace is way down in the quality lists. The Ace was bought from Komplett in Sweden, would I gissa. But it is not sold any longer, likely because the quality simply was too poor:
http://www.aceofsweden.com/ace/case/mini-itx.html Apparently only around for a single year.

Does hp dv4 1551dx support hardware virtualization?

hi,
Does HP dv4 1551dx support hardware virtualization? if support, how does enable it?
Thanks
This question was solved.
View Solution.

To help you with your query, I have found a microsoft link on Windows 7 operating system itself. The link will provide all the necessary information about your query.
http://www.microsoft.com/windows/virtual-pc/support/configure-bios.aspx
Please post the update of the solution provided for further help.
Let us know for more!
"I work for HP."
Click the Kudos star to say thanks
Please mark Accept As Solution if it solves your problem
Regards
Sreenag

MSI E350IA-E45 vs MSI E350IA-E44

Hi
I want to buy a mainboard MSI E350IA-E45, but I can find it nowhere.
Seller's made me offer for MSI E350IA-E44, but there is no information on the net about the model.
There is no test, no review.
It seems very similar to E45 acoording to specs.
Anyone knows differences for this two mobo's ?
Is it older model ? For other region ?
regards
Roger

Quote from: Henry on 24-January-12, 07:54:54
So far I can only find the MSI E350IA-E44 on the MSI Malaysia website, the -45 is on all the rest of them. I don't see any difference in specifications & BIOS so it's my guess the only difference would be regional location where they are sold.
http://www.msi.com/product/mb/E350IA-E45.html#?div=Detail
http://my.msi.com/product/mb/E350IA-E44.html#?div=Detail
Thank you for your reply. Yesterday I saw these specs also.
You've confirmed my assumptions.
I'll buy E44 and check it
regards
Roger

[Please Help]Does MSI Axis 945G support intel core2 duo T7600?

I have an idle CPU intel core2 duo T7600,so I am considering buying an AXIS 945GM to let it work.
I have a question ,does MSI Axis 945G support intel core2 duo T7600?
I checked the CPU suppot list on MSI website,I just found it suppots upto T7400.
Can I flash the new BIOS v1.23 to support T7600?
thank you!

According to the CPU Support List, this won't help. The best thing to do would be to contact MSI Technical Support. Maybe they can give you a more definate answer:
http://ocss.msi.com.tw/

[MSI E350IS-E45] Problem with DVD drive

Hello my friends.
I just bought this little board to make a HTPC for my daddy and Im getting a hard time with it.
I installed everything fine and installed windows 7, via USB flashdrive and when i rebooted I tried to put the CD with drivers to finish installation, but whenever i put any cd inside this drive the computer boots.
If I start the computer with CD inside the drive, it will just hang with a 98 error code down and just wont start the windows.
The computer have the following parts:
- Spire PowerCube 300w (http://www.spirecoolers.com/main/product_detail.asp?ProdID=826)
- MSI E350IS-E45
- 2x2gb OCZ SIGNATURE DDR3 1333MHZ, configured as 1066mhz.
- 1x OCZ AGILITY 60GB SSD
I tried change the sata cable from one place to another. This psu is very good and have enough power to this setup, this psu was tested with a core i3 system (wich by the way consumes way more power than this HUDSON guy).
Please, dont lie to me... Im on this busines for almos 2 decades and I know that there is something very odd happening here, I just downloaded a new bios version and will try to do a bios update later when i get home to see if this problem is solved.
Thanx in advance!

First of all, I would redo the cooler paste.
It's my experience that the installed thermal-pads are no good.
I have the E350IA-E45 myself and I removed the pads and the temperature dropped significantly.
I informed MSI about this and they are currently retesting the cooling solution, removing the pads for grease can lower temps as much as 10C!! (or more)...
As for the PSU, my system with 4! 1TB harddisks and full load hardly uses more then 55W tops, that PSU should not be a problem.
However, do consider the drive can be faileing, OR the drive is bootable and crashes before Windows can start.
I have noticed that our Forum-flasher crashes too with exactly the same symptom.
Anyway, what do you mean the computer boots if you put a CD in? Is that after or before Windows is loaded?
Because before it can mean the CD is bootable, if it's after Windows is loaded it probably means the drive is bad.
In any case, do check the thermal pad under the cooler, see in the BIOS how hot the CPU is.

MSI E350IA-E45: 61C 4300RPM in idle

New MSI E350IA-E45, open computer case, no OS yet. Check BIOS HW monitoring page: CPU temp. 61C, CPU fan speed 4300RPM. I can't check full load temperatures (no OS yet).
It seems to me it is too high temperature and as the result - quite noisy cooling.
What could you recommend? Send to replace/repair?
P.S. Glad to read about any experience with this MB temperatures.

Quote from: Bas on 12-May-11, 16:25:14
Do not use M-flash!!!
>>Use the MSI HQ Forum USB flasher<< instead.
M-flash has killed so many boards that it's not funny anymore.
(Yes we are telling MSI this every chance we have but they keep in there )
Lesson learned ... I wish I new that before I tried to use the m-flash

MSI E350IA-E45 BIOS V1.5 fails to install

I have a MSI E350IA-E45 motherboard, currently running V1.4 of the BIOS (which I had previously flashed from 1.3). I downloaded, unzipped and attempted to install the 1.5 BIOS last week, and it just hangs during the flash program using a bootable DOS USB drive. I tried 2 different USB flash drives, and I also tried using the M-flash method. No luck. It behaves as if the BIOS image is corrupted. I tried downloading it from a different country's MSI server, same symptom. Has anyone here successfully upgraded to this level BIOS? Thanks!

Henry, I tried the forum utility. It appeared to install ok on a USB stick, but would not boot. Upon inspection, the USB stick did not have a DOS kernel installed on it, so I gave up on that method.
I eventually got the BIOS updated via my own original bootable DOS USB stick, using the AFUDE234 program. For some reason, I had to turn off the HDMI-connected HDTV I use as a monitor, and plug in a standard monitor via VGA. I guess there is a video mode issue under DOS.

MOVED: Does my motherboard MSI MS-7680 supports hardware virtualization

This topic has been moved to MSI Intel boards.
https://forum-en.msi.com/index.php?topic=251942.0

oki, that's some very early bios release even below 1st one, and its beta version
make me wonder if your board is some kind of engineer sample
can you tell S/N of your board?
Quote
I cannot find the option to turn hardware virtualization on in my bios. I installed Speccy and the program says that my computer can support hardware virtualization, but that hardware virtualization is disabled.
Intel core i3-2100 3.1GHz
What kind of virtualization?
See what your CPU supports:
http://ark.intel.com/products/53422/Intel-Core-i3-2100-Processor-3M-Cache-3_10-GHz
Quote
I have entered bios, searched under advanced and didnt find no option to enable hardware virtualization.
look under Overclocking ==>CPU Features:
Intel Virtualization Tech
Intel VT-D Tech [Your CPU used do not support this one]

Cool n Quiet on MSI E350IA-E45

Just picked up the mini-ITX E350IA-E45 for a home theater build. Seems to be performing well, but I can't seem to get the C&Q to work. It's enabled in BIOS, I've got the W7-64 power settings set correctly, but the CPU stays at 1600 MHz, and the temperature seems HOT at 70C. Any thoughts or experiences?
I'm afraid to flash the BIOS because of the horror stories I've read, and everything else seems to be working fine.
Oh, when I try to launch AOD or MSI Overclocking Center, they just crash.

Thanks for the quick reply. I've got AS5 and Ceramique, so I'll try one of those.
I also had been using Everest to monitor the CPU frequency. It wasn't able to detect CPU temp, though, so I was getting that reading from the BIOS. I tried another monitoring program called HWiNFO64, and it detected that C&Q was indeed working. It also gave me two very different temps: one from an AMD sensor that went from 63-70C, and another (don't recall the name offhand, maybe Fintek or something?) that gave me readings from 47-50C. Wondering which one was accurate, if either.
Thanks again!

MSI E350IA-E45 Wake on Lan

Hello,
A few day's ago I ordered the E350IA-E45 to build into a HTPC, but the day after I read a post where someone said that
this board does not support Wake on Lan. So I decided to go searching for confirmation, but I can't seem to find an answer. I've already
searched the manual, but it doesn't say anything about Wake on Lan.
I'm hoping someone here can confirm that it does, or does not support Wake on Lan.
Willie

Thanks for pointing me in the right direction!
It has a Realtek RTL8111E lan controller, which does support WOL.
Willie

MOVED: Does MSI E350IA-E45 support AMD virtualization?

Similar Messages

Maybe you are looking for