MOVED: MSI K8N Neo 2 Platinum Problem

This topic has been moved to Overclockers & Modding Corner.
MSI K8N Neo 2 Platinum Problem

A lot of things could be wrong but it will be easier to figure out if we know what you did.  When you say you changed settings in Bios, do you remember your last settings and what you did?
It might be helpful if you created a sig (as described in the forum rules) to show what you have in your system like my sig below. (Hint- use profile button in sign on screen.)
Things could be broken even if there is no visible evidence (such as flames or melted component) of course.
If I had to guess and your d-bracket reading is correct, corrupted bios requiring new bios chip, but let's not guess as a lot of things could be wrong and you don't want to invest in a new bios chip if the board cannot be brought back to life.  Consider removing parts and testing them in an other machine.  Start with CPU and memory?
Good luck.

Similar Messages

  • MOVED: MSI K8N Neo Platinum (MS-7030) won't post and just beeps

    This topic has been moved to AMD64 nVidia Based board.
    MSI K8N Neo Platinum (MS-7030) won't post and just beeps

    1)Main Menu - No Post/No Boot problems and fixes   - Bios-Central Award Bios Beep Codes + others
    2) Memtest86+ As Stated
    3) Power Suppy Requirements & Selection
    4) Post Specs re Powe supply 3.3v 5v & 12v Amps., Gfx cards Drives etc.,

  • Kingmax Hardcore 4000 on MSI K8N Neo Platinum Problem

    I am currently running a A64 3000+ on this board with 512MB of Kingmax Hardcore PC4000. When I have the stick in the first ram slot it will error out in memtest, but if I place it in ram slot 2 or 3 it works perfectly and passes memtest. I've seen other people running this ram on this board and I am wondering if my board is bad or if this is just some weird ram incomptability. I wouldn't mind this so much if I was just going to have the one stick but I am eventually going to get another stick of this and go up to 1GB. Any comments would be nice.  

    Some sticks were tested and passed by MSI to run in certain DIMM slots. I just got back from MSI's Test Report section for the K8N Neo2 socket 939 board, and in the memory section - they have a list of all kinds of memory that worked, and which slots it worked and passed in....you might want to check it out for your mobo!!!

  • MOVED: MSI K8N neo2 platinum PROBLEM WITH MAXTOR 300 SATA2

    This topic has been moved to AMD64 nVidia Based board.
    https://forum-en.msi.com/index.php?topic=93611.0

    BTW -
    Here's a thread about your prob to check out. I thought it was totally solved for all nvidia chipsets, guess not. Nf3's seem to still have it to some extent. It seems Maxtor is the one that "dropped the ball" this time...
    https://forum-en.msi.com/index.php?topic=93492.0

  • MOVED: MSI K8N Neo-F problem with Maxtor DiamondMax plus 9 slave.

    This topic has been moved to AMD64 nVidia Based board.
    https://forum-en.msi.com/index.php?topic=95536.0

    it has a 150gb FAT32 partition and a 100gb NTFS one.
    Old mobo was a FIC AN11, but that is probably erroneous now.
    As for the motherboard not recognizing it, the ide cable was loose. after fixing that, it is detected fine in bios.
    And computer management now shows "Online" for the drive after I initialized it, but still shows unallocated under it. It is not unallocated.
    Anything I can do to ensure I don't lose information?

  • Msi k8n neo platinum ps2 keyboard problem

    Hi. I'm having issues with my msi k8n neo platinum motherboard. I've read about 50 posts on these forums regarding the supposed ps2 keyboard issues with recent msi boards. However none of them seems to address my current situation.
    Like many  others, when I power up my system the cpu fan spins for like 3 seconds then everything comes to a halt.
    I tried many things to get my system to boot and the only thing that works is plugging my ps2 keyboard into the ps2 mouse port and moving the ps2 mouse into a usb port with an adapter.
    It seems there's no hope for fixing the problem other than RMA'ing, but I thought I would add to the pile of complaints stacking up against the MSI boards.

    if u had read the threads a little more u might have found a solution that seems to have worked 4 many - a usb keyboard usb Keyboard if u go this route dont forget to enable usb kb in bios
    Edit: This Thread Summarises the situation PS2 keyboard/mouse causes random shutdowns or doesnt work      

  • MSI K8N NEO PLATINUM (RAM/HD problem/mobo problem?) [SOLVED]

    my setup:
    windows xp pro sp2
    amd athlon 64 3200+
    msi k8n neo plat - 7030 - bios 2.1
    x800 xt vid
    sound blaster audigy 2
    kingston valueram pc3200 2x512 cas 3-3-3-8
    ps = antec 430 watt truepower power supply (20 A on 12V)
    I dont know if you guys remember my but i created a topic on here a while back about how my keyboard and mouse suddenly stopped working, well that turned out to be that the msi k8n neo platinum just went bad. So i RMA'd it and recently got the replacement board (with latest bios already installed). It worked completely fine for about a day. Well that same day i got it back, i installed a Logitech G7 USB wireless mouse. after i installed it, i began getting numerous windows stop blue screen errrors, even after i removed the mouse from control panel. So i figured i should format because to rule out everything and start fresh. So i did a FULL format and attempted the reinstall windows again. AFTER the format and BEFORE windows attempted the continue installation, i got the same stop error. I figured now this was a hardware problem. So first i tested RAM. I got the latest version of memtest86 and let it run for 4 hours (11 passes) with NO errors at all. Secondly, i got a western digital hard drive diagnostic program to test for failing hard drive and again no problems with that. I still suspected ram so i tried to boot with only 1 stick installed (in first slot), however the PC didnt boot at all (cleared cmos too). So i moved it to the second slot and cleared cmos again and this time it posted but it just hangs at a cursor and does nothing, same thing happened with third slot. I tried this same procedure clearning cmos each time with the second ram stick and got the SAME results. Shouldnt the motherboard boot with only 1 ram stick installed? Did MSI RMA me another bad board? Any help would be appreciated. thanks.

    Quote from: russellmrgn on 28-March-06, 10:54:39
    Sap147
    Can you give us what the D-Bracket was showing ie
    R R
    G R
    As an example this means "Initializing Keyboard Controller"
    You will find this information in the manual page 2-23. (On mine) under Hardware Setup
    Also can you please do all your tests with the ps2 keyboard and mouse and for now leave your Logitech G7 USB wireless mouse to one side.
    Russell
    for two sticks of ram = RR
                                   GG
    for one stick of ram = GR
                                  GG
    as for the g7, it hasnt been plugged in at all, i took it out long ago.. as for the ram, the timing was set to 2T, no overclocking, i will try 2.7 v and let you know, but for the record, it has been running at normal voltage settings for about a year perfectly fine.

  • Problems with 64 3200+ on MSI k8n neo platinum.

    AMD Athlon64 Newcastle 3200+ AX 2200MHz/2.2GHz 512kb Boxed (with cpu-cooler!) Socket754
    MSI K8N Neo Platinum nForce3 250Gb 3DDR-DIMM 5PCI SATA Raid Audio GB-LAN Firewire Socket754 ATX
    Kingston KVR400X64C3A/512 512Mb DDR PC3200 400MHz 184pin Unbuffered CL3
    Okey here it comes..
    I installed everything and all seemed to work okey,  until i threw in the XP install cd and began my install..
    in the dos install of windows xp, (when it moves files to the hdd) it stopped and said that there was a problem with a file that were to be copied, i pressed enter to try again and  the install moves on,  this accurs 4-5 times and then it gives me a BIG  "IRQL less or not equal".. Blue screen of death.. (it complains on different files each time i try to install xp, tried 15-20 times)
    I have tried to change memory to another Kingston KVR400X64C3A/512 512Mb DDR PC3200 400MHz 184pin Unbuffered CL3 with no luck,
    changed hdd, change gfx-card. change psu,  removed all no-need pci-cards..
    but still same error, i aint no expert so i might have missed something in bios or something :(
    please help me if you can..

    Flashing bios with memory errors is a veeeeery bad idea .
    Almost guarantied to ruin your bios chip with bad data block.
    That this even is suggested with mem errors , well .
    You need to resolve the mem errors before doing anything else.
    The windows xp install routine is a very heavy user of cpu and memory
    and will fail if you have mem errors like you have.
    Some things to try is entering bios and change auto settings on cpu voltage
    giving it 0.5v more than default .
    Set the memorys voltage to vendors max approved voltage
    which for yours is 2.6v +/- 0.1v . So it's safe to set at 2.7v .
    Set timings to cas 3 ,ras 3 ,trp 3 , tras 8 , CMD 2T.
    Pushing it firmly down in the dimm socket , sometimes it's not all the way down there even if the plastic lockers snap in.
    Disconnect all devices not needed for a windows install ,things can be added later.
    Have only the hd that os is to be installed to , one cdrom , floppy , memory and
    gfx card .
    Disconnect USB case front connector (cause corruption and strange faults if
    USBOC pin is connected)

  • MSI K8N NEO Platinum Edition PROBLEM

    Hi (my english is not good sorry for that)
    I just got my new computer:
    MSI K8N NEO Platinum Edition
    AMD Athlon64 3200+
    Western Digital Caviar 160Gb
    PNY Verto GeForce 6800Ultra 256Mb
    1GB Value Select pc3200
    Levicom 500W
    The Problem is that when i start the computer, it boot and die directly no bootscreen what so ever, it boot and die.  i dont know what to do plz help me

    Make sure you have Both the ATX Wires on.. theres the Big one! (21Pins i think).. and the Small 4Pin Connector both need to be connected.. if you havent done so yet.. Another thing you could do is Take everything out and place it on a cardboard or something appropriate for the mobo.... I think your motherboard is shorting?.. if it's touching your case.. I had somewhat the same issue long time ago.. give it a try..if you want hope it helps..

  • MSI K8N Neo Platinum & Crucial Ballistix 512MB RAM Problem

    I have had MSI K8N Neo Platinum and 1x Crucial Ballistix 512MB RAM for 11 months.
    I have had 1x Crucial Ballistix 512MB RAM for 2.5 months, for a total of two.
    I have had MSI GeForce 6600GT (NX6600GT-VTD) 128MB AGP for 1 month.
    For about 1.5 to 2 weeks, I have been seeing random crashes while playing PC games.
    I started a thread on the Hard OCP forums a few days ago.  I did not know MSI had forums =)
    Rather than re-typing, I may as well just post the link:
    http://www.hardforum.com/showthread.php?t=934956
    My issue is also similar to this one:
    https://forum-en.msi.com/index.php?topic=83799.0
    Thanks for the help.

    ALL RIGHT, after almost    FOUR    months my issue is FINALLY    resolved.
    It is amazing how much time passes when you are hesitant to buy parts unless you are 95% sure it will fix the problem.
    OK, here is an update as to what I remember.
    I went to BIOS 1.4 and tried many different physical and BIOS RAM configurations (Different seating, different number of DIMMs, different RAM timings, voltages, etc).
    I concluded that I could not make my PC 100% stable, but I could get it darn close.  With certain settings, such as DDR400, 2-2-2-6, 1T, 2.80V, Aggressive Timing enabled, Memtest failed test #5 every time (this is spec for my RAM).  With other settings, such as DDR333, 2.5-3-3-7, 2T, Auto V, Aggressive Timing enabled, Memtest failed test #5 maybe once out of 5000.
    I also concluded that the RAM voltage and Aggressive Timing setting was having a big impact.  Some settings would not work (failed Memtest) with RAM at 2.80V but would work with RAM at Auto V.  Some settings would not work (failed Memtest) with Aggressive Timing enabled but would work with it disabled.
    Finally, I started to occasionally get R,G,R,G (Processor Initialization) on the D-Bracket upon cold-start & warm-start, which suggests a PSU issue:
    https://forum-en.msi.com/index.php?topic=76972.msg542545#msg542545
    That pushed me over the top, and I decided to buy a new PSU (TG-480-U22) and a new SATA HDD (WD2500KS) just because.
    Problem solved.  Thanks for all the help.
    I will continue to buy MSI in the future just because of these forums…and a good product of course!

  • MSI K8N Neo Platinum with Vapochill Case problems - Help anyone. :)

    Hi all,
    Had a bit of a tricky problem and as Im new to this board I have no idea what could be causing this.
    First all all system specs:
    Athlon 64 3700+ Clawhammer
    MSI K8N Neo Platinum -
    1 gig Corsair XMS ProL Low Latency Ram (2 x 512mb)
    Nvidia Gefore 6600GT
    1 x WD Raptor 10000rpm HD
    NEC 2500a DVD writer.
    Eye-T 550w PSU.
    Vapochill SE Case with installed Vapochill Phase change cooling.
    Here are photos of it in its present state, you will notice that it isnt installed in the case at the moment.
    The reason for that is because the two wont work together and I want them to so so bad...
    So, hopefully someone here can save the day for me - here goes.
    I have tested the Motherboard and all other componants outside of the case and everything runs smoothly and there are no problems what so ever, great.
    I have also retested the Vapochill case with another motherboard and that also works without a hitch.
    The problem comes when I insall the MSI board into the system, all hooked with a really basic setup, PSU, Case cooling, CPU and Ram. Flick the on switch on the power suply and the system turns on for around 1/2 a second then turns off again. I found this strange because it soundnt come on at all until I press the power button.
    If I press the power button the same thing will happen over and over.
    I have tried a different powersupply and this does nothing at all.
    I have checked for shorts and there is no possible way it is shorting on anything.
    I have a fan plugged in where the CPU fan would go and this doesnt help.
    I have taken it back out and tested it again and it still works ok.
    Does this sound familiar to anyone? Are there any secret Bio's menu's that would have an option that would solve this?
    Any help would be greatly appreciated.
    Glenn

    When you are running the MoBo standalone, what are you connecting to the Power, Reset, HDD, etc. pins ?  Are you using the wires from the Vapochill case, or something else ?  It looks like a single cable with an intermittent switch (red/white cable).  I once had a similar sort of problem and it was because I hadn't connected up (the incredibly fiddly) cables correctly.  Other than that, I would have gone for a short of some sort - but you have checked that already, so . . . .
    As to the system starting to power-up when you switch on the PSU, I wouldn't worry too much about this.  It seems to happen from time to time with some of my systems - amongst other things, the BIOS can be set to resume to previous state after a power-fail.

  • MSI k8n neo platinum post problem

    I just bought a 2nd hand K8N neo platinum and I can't get it to post, I have reduced down to 1 stick of ram(tried all slots) vga and cpu running out of case. I have an ultra 600 psu that certainly should be doing the buisness as everything was fine on an NF7S-V2 up until 1/2 hour prior.
    On the led device it's starting 4 red then after a couple of seconds it goes 1 red 2 red 3 green 4 red which I found relates to keyboard controller. I've tried with various keyboards but no joy. I get nothing on the screen at all but that's the next stage in post.
    My memory is Twinmos 3200 twin x 2 x 512 double sided, which I saw in the sticky can be troublesome.
    Any body got any ideas?

    i am having an almost identical problem.
    First the system wont go past post,then i realised it would but only boot if i had the USB mouse unplugged (i noticed the d-brackets lights changed after i unplugged the mouse)
    then i was able to get to windows, however i couldn't do much (mouse wouldnt detect if replugged, keyboard not detected - all lights off)
    So i tried clearing the CMOS
    now i am having the same problem, except this time i get CMOS checksum error - defaults loaded
    then it tells me to press f1 to continue to del to enter setup, which i cant do since the keyboard wont work. so now im totally bamboozled
    I've tried changing the PSU as well with no luck (both were 500watts)
    Funny thing is, the pc having the problem is identical to the pc im writing on now, presonally i think the motherboard is not v good, since alot of people have this problem or similar to it. (and yes im using the keyboard and mouse now, that i tested on the other pc)
    SPECS:
    MSI k8N Neo Platinum
    Powercolor Radeon 9800 Pro
    AMD 64 3000+
    1GB Geil Memory
    Maxtor 160GB
    500watt Magna Dual Fans
    Will check what the D-bracket says and will report back.
    ok here goes:
    (with usb mouse plugged in)
    1= green
    2= red
    3=red
    4=green
    (without usb mouse plugged in) - but bare in mind i cant press f1 (no keyboard) to continue else i would probably be able to get to windows.
    1= green
    2= green
    3=green
    4=red

  • MOVED: [Athlon64] Msi K8N Neo2 Platinum problems with Patriot Ram

    This topic has been moved to AMD64 nVidia Based board.
    [Athlon64] Msi K8N Neo2 Platinum problems with Patriot Ram

    First post, whoo hooo   
    So what version of BIOS are u running?  I recently installed the two newest versions 2.0 and 2.1, and they both give me problems.  With the latest (2.1) I'm getting the same error as you.  Returning back to previous BIOS fixed my problems.  Oh yeah, my RAM is Kingston Hyper-X, so i don't think thats your problem.
    Let me know if you fix it, thats why im here, .

  • "error loading operating system MSI K8n Neo platinum

    OK,
    System will post, according to MSI Website I have the latest Bios version.
    I can boot from CD.
    The only odd item is that I am using the HD that I took out of my old computer with windows already on it.  
    Tried re-installing windows XP.  It went through the loading process and then rebooted.  Same error message appears.
    Also, is 48 degrees normal for idle temp on CPU AMD 64 3400? 36 degrees NB temp ok?
    Oh, yeah, I have a floppy installed, CD-ROM, CD RW, all non SATA. Using IDE cables.
    Video is Asus V9980 ultra GeForce FX 5950.
    MSI K8N Neo Platinum
    AMD 64 3400
    Hercules 600 W PSU
    WD 80gb HD
    Generic CD-Rom
    Sony Cd-RW
    2 x 512 crucial 400 ddram  slosts 1 and 2
    Asus V9980 ultra GeForce FX 5950 256 TVD
    Do I need to clear bios and re-start?
    HD is on it's own cable in IDE 1
    Cds on IDE 2 shared.
    let me know what you think.
    The other related posts I read, people were using raid or multiple OS.  I'm not.

    I had the same issues as you sometimes Windows would install and sometimes it wouldn't the problem was related to ram. I had my ram in slots one and two like you did and I moved the ram to slots 1 and 3 and now the machine is rock solid stable.
    I think most of the problems people are having are actually more ram related than anything else.
    So try moving the stick of ram you have in slot 2 to slot 3 and see if this solves your problem. This solution is on forums somewhere I am just not sure where.
    Take care,
    Bob

  • *UPDATED 7/15/04* Complete guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum

    Complete newbie's guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum:
    Last Updated: Thursday July 15th, 2004
    Bioses:
    (In order of date released.)
    1.1b3 - (Download)
    - Pre-1.1, given to reviewers to use in their reviews and benchmarks.
    - Less stable, but supposedly you get slightly better overclocks.
    1.1 Official - (Download)
    1. This is AWARD BIOS release
    2. This BIOS fixes the following problems of the previous version:
    - Memory always run DDR 200 when install single side DDR on DIMM2 & DIMM3.
    - Windows 2000 can't format the RAID IDE HDD when plug in Promise 378 controller.
    1.2b5 - (Download)
    1.2b7 - (No Download Yet)
    1.2b10 - (Download)
    - First attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and doesn't fix it for anybody with Clawhammer cores.
    1.2b12 - (Download)
    - Second attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and some people with Clawhammer cores.
    1.3b1 - (Download)
    - Another attempt to fix temperature problems?
    - Possibly fixes cold boot/power light issues?
    1.2 Official - (Download)
    1. This is AWARD BIOS release
    2. This BIOS fixes the following problems of the previous version:
    - System can't resume from S3 sometimes when install USB device.
    - Support K8 Sempron CPU.
    - Turn off keyboard LED in S3.
    --Quick Guide for flashing BIOS, provided by MSI--
    1. Create a MS-DOS boot diskette, then copy the the .exe and the bios file to the floppy disk. Both of these files can be found in the package you downloaded.
    2. Press "Delete" and go to BIOS setup while computer bootup.
    Check BIOS advanced features and see if BIOS flash write control is enabled
    (This option must be enabled. If you can not find this setting, it means the BIOS can be
    flashed.)
    3. Boot from MS-DOS boot diskette and get a:\> prompt.
    4. Type "", then press ENTER
    5. The flash program will then ask "Do you want to save BIOS?", please press "N" for no. The when you see Press 'Y' to program or 'N' to Exit, please press "Y" to continue.
    6. After flashing complete, remove floppy and reset the system .
    7. Press DELETE or F1 when prompted at first reboot after flashing.
    8. Load BIOS optimized defaults, then save settings and exits.
    Drivers & Needed Files:
    (Note: All these drivers are for Windows XP.)
    Leaked Nvidia nForce3 Chipset Drivers Version 4.40
    (Please use at your own risk, these are LEAKED drivers. Password for the .zip file is "ocworkbench rules". Also, you will need to rename the WinXP_2K folder in IDE to either WinXP or Win2K else the installer doesn't pick it up.) Thanks for the link Wonkanoby!
    *NEW* Leaked Nvidia nForce3 Chipset Drivers Version 5.03
    More leaked drivers? Seems some parts of the drivers are older and some are newer.
    1. Windows XP Service Pack 1A (Web Install) -or- Windows XP Service Pack 1A (Full Install)
    2. Microsoft DirectX 9.0b (Web Install) -or- Microsoft DirectX 9.0b (Full Install)
    3. Nvidia nForce3 Chipset Drivers Version 4.24
    4. AMD Athlon 64 Processor Driver Version 1.1.0.14
    5. Nvidia Video Card Driver Version 56.72 -or- Omega Nvidia Video Card Driver Version v1.5303
    (The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard Nvidia drivers.)
    5. ATI Video Card Driver Version 4.7 -or- Omega ATI Video Card Driver Version 2.5.51
    (The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard ATI drivers.)
    6. Onboard Sound Driver (Realtek AC'97 Audio Codec) Version A3.61
    It is HIGHLY reccomended that you install the drivers/needed files in the order listed above. Please note that there are two #5's because you either install one or the other depending on your video card, do not install both of them.
    You will come across a problem here though. You can't install the chipset drivers without installing the Windows service pack and DirectX first, but the Windows service pack and DirectX installs need the internet to download files and you won't have working internet until you install the chipset drivers. Here's what I did to get around this. Instead of downloading the web install versions of Windows service pack and DirectX, download the full version and and put them along with all the other drivers on a backup hard drive or burn them to a CD, this way you will have all the drivers you need when it's time to install them and none of them will require the internet to download files.
    Another note when installing drivers. Apparently the Nvidia chipset drivers also come with drivers for the onboard sound, but people seem to agree that the Realtek onboard sound drivers are better. When you are installing the Nvidia chipset drivers, just be sure to uncheck the box for sound drivers when it asks you which drivers you would like to install. Now you can safely install the Realtek drivers without any chance of conflicting sound drivers. Thanks for the tip Wonkanoby!

    Quote
    Originally posted by RLiu818
    Quote
    Originally posted by Deviation56
    Quote
    Originally posted by RLiu818
    You CAN install the nforce drivers BEFORE installing SP1.  The only requirement to install the nforce drivers is DX9.
    So is SP1 still recommended to install before the nforce drivers?
    The installer still reccomends to install it beforehand for full USB 2.0 functionality... I would have put what you said in there but I wanted to keep it as simple as possible.  
    oh.  IIRC the installer just says USB 2.0 will be fully functional after SP1 is installed.  So after you install SP1 you go into device manager and u click update driver and it will auto search and update the driver.
    Simplicity-wise, i guess its pretty much equal.  It might take less preparation to just copy DX9 full onto a CD and install that first, then nforce driver, then right away you have yoru internet connection.
    but i dunno.. i guess i will try it your way this time when my RMA"d board comes.
    i will be fomratting and doing a fresh install later on today and will let you know if i come across any problems

  • MSI K8n Neo Platinum

    Hi Guys,
                 I am having a problem with my computer at the moment. I am having trouble getting into the BIOS of this motherboard (MSI K8N Neo Platinum). When I try to get into BIOS, it goes into a black screen with a little line on top of it and its blinking. This has never happened before. Then when I shut off my computer since I couldn't get into the bios, I turned it back on and it goes on but nothing goes to screen or it wont boot up to startup screen. Then I turn it off, I reset the BIOS and turn it back on. Now it boots up to the startup screen, but when it says press del to get into bios, I pressed that and it happens again, it will not get into bios. When I do this over again by resetting the bios, this time without getting into BIOS, it goes on and boots up to Windows XP. I want to reformat my hard drive with a fresh copy of XP Pro, but I can't get into BIOS to do that. Can someone help me?

    Same thing happened to me today. Thanks MSI for publishing a Betaversion of a BIOSupgrade on the Live update.. 
    At first I figured that there must have been some fault during the BIOSflash so I downloaded the file again and repeated procedure. This time it worked like a charm and I could do all my BIOS-settings. The next restart the problem was back again though, and this time I had swapped the order for my SATA-drives to boot (to the way they should) but the system couldn't boot. So I couldn't enter neither the bios or Windows. Luckily you can shift the primary boot device by pressing F11 though, so I got out of the libido...
    Now I've downloaded the old 1.9 Version instead and I sure as h*** won't do any more beta-testing for MSI by using the Live Update anymore!

Maybe you are looking for