Movement type 101 does not currently support
Dear Experts
there is an error occur at the Time of MB31 with 101 Movement type
Movement type 101 does not currently support serial number Management.
Rgds
Pankaj
Hi
Serialization config is missing for 101.
Check in below config
spro>plant maintenance & customer service>master data in plant maintenance & customer service->technical objects>serial number management-->define serialization attributes for movement types
Check with the help of PM or CS consultant
Regards
Antony
Similar Messages
-
Movement type 101 does not currently support serial
Hi experts,
I'm trying to realize MIGO for a PO with a material with serial number.
The error msg is " Movement type 101 does not currently support serial number Management." IO306
I already config. spro>plant maintenance & customer service>master data in plant maintenance & customer service->technical objects>serial number management-->define serialization attributes for movement types
And
Plant Maintenance and Customer Service -->Master Data in Plant Maintenance and Customer Service -->Technical Objects --Serial Number Management -->Define Serialization Attributes for Movement Types
And assigned the material to attributes ate MM02.
I have know ideia what else i have to do.
Is there anone here already see that?
Tks
Antonio Oliveiratry posting GR via MB01 transaction instead of MIGO and let us know if you are getting same issue.
also there are few OSS notes created for this kind of issue which has to do with maintainenance of table V_T156SY, check below thread
Movement type 101 does not currently support
yogesh -
Movement type 647 does not currently support serial numbers management
we can't do "shipment start/PGI for DOWN shipment 1178184 DN# 40309339.
Error message " Movement type 647 does not currently support serial numbers management" see also attachment
Error is like that
Stop : Save Shipment
Stop : Shipment 0001178184 :Action for Shipment start
Read Activities profile ZPGI
Main issue
Stop: Movement type 647 does not currentely support serial number management.
Delivery 001114455 in shipment could not be posted GI
Ssome problem with the movement type 647.
what I understand is, its a SD movement which place the material in transit and automatically executes
the 101 movement. If possible please help in this matter.
Pls help what exactly issue and resolution .
Regards
VickyCheck this thread
[STO with delivery in 1 step (mvt. type 647) with serial numbering |STO with delivery in 1 step (mvt. type 647) with serial numbering]
thanks
G. Lakshmipathi -
Movement type 317 does not currently support serial number management
Movement type 317 - support serial number management?
We are using SAP ECC 6.0. and trying to create a structured material from constituent components with the WM 317. The components are using serial numbers. When we try to post the material document we get an error message:
u201CMovement type 317 does not currently support Serial number managementu201D
Movement type 317 does not currently support serial number management
Message no. IO306
Diagnosis
With the help of * under the business operation, the entry in table T156S used here under movement type 317 defines that no serial numbers are supported here.
System Response
Termination of the transaction called up.
Is any new availability which support serial number management in warehouse movement 317?Is the scenario relates to Retail ?? Movement Type 317 is used for Creation of a structured material from constituent components (Retail). Check Note 131969 - Recommendation: Store returns in SAP Retail Release 4.0
thanks
G. Lakshmipathi -
Movement type 124 does not currently support serial number management
Movement type 124 does not currently support serial number management
when I post goods return in qa12, the system shows movement type 124 doesn't support serial number.
Could anyone can tell me where I can set the movement type for serial number?
JohnUnfortunately it is impossible to post a return delivery from the usage-decision for a material with serial number profile, which is in goods receipt blocked stock. This is is missing functionality
The possibility in the standard would be the following :
1. Close the inspection lot. Please do the stock-posting in a way, that you post to 'GR blocked stock'. Remark : No physical is done. This is only necessary to achieve, that status SPCO is set.
2. Post the reutrn delivery with the MM-IM-transaction (e.g. MIGO).
Please check, if this is possible. -
Migo (Movement type 101) does not update quntity in the report.
Dear experts,
I have a custome report for goods receipt (ABAP Query).
In this report, quntity (unrestricted stock) is not updated when I do MIGO (mType 101). The quntity however, is updated in MMBE unrestricted stock columm after MIGO.
Could you please help me how to make quntity updated in the report when I do MIGO with movement type 101?
I thank in advance for all replies.
Jaan
Edited by: Bhajan Singh on Feb 9, 2010 10:19 AMThanks R.S. Nambi for your rpely.
The question is solved.
I went to query, then Additional fields and picked movement tyep-quntity field, went to Local fields and added complex calculation for mtype 101.
I am going to close this thread. -
There were no results for I've downloaded the kindle app to my new iPad4 but when I went to Amazon UK and tried to download a book it said "this mobile app does not currently support digital downloads. I don't understand! I was told you could download kindle books from amazon straight to iPad if you download the kindle app first. Do I have to do it onto my computer and then sync it onto iPad? surely not?
Can you go here:
http://www.amazon.co.uk/Kindle-eBooks/b/ref=amb_link_173148087_8?ie=UTF8&nav_sdd =aps&node=341689031&pf_rd_m=A3P5ROKL5A1OLE&pf_rd_s=center-1&pf_rd_r=1GDPPW8ZCN9Y 9NQF5VV0&pf_rd_t=101&pf_rd_p=365751407&pf_rd_i=468294
and not log on. See what you can do. -
Target does not currently support account discovery
What does the message "Target does not currently support account discovery" means?
I am getting it while using OPAM REST API to get the accounts from a given resource.
How can I make it support it?
TIA
LeoI would suggest waiting a day or two. YouTube has their standard flash format that will play on a web browser, but they also have an h.264 format that will play on the iPhone. It may take some time before they create the iPhone version. Similarly, it may take some time for YouTube to post a high def version.
-
Error: Movement type 101 k not planned
Hi Freinds,
While doing GR for Consignement framework order , im getting this error as 'Movement type 101 K is not planned. (Entry is not copied over)'.
Could u help me with this please.
Thanks
AkkshayaHi,
Enter the item category K for the consignment item in your FO . To ensure that the goods receipt is posted to the consignment stores and an invoice receipt cannot be generated for the item.
BR
Diwakar
reward if useful -
262 Movement Type Issue - Does not check order
Hello,
A material is issued via a 261 to an order.
Say this order is now complete and we want to do a 262 back into stock SAP does not check whether or not the material had ever been issued to the order I entered in my 261.
Is there anyway we can have a 262 movement type check whether the material is in the order we enter?
N.B. I am aware we can use MBST, however this doesn't help for partial reversals.
E.G.
MIGO - 261
Material 123456789
Order2 123XYZ
Plant 1234
MIGO- 262
Material 123456789
Order2 RANDOMORDER
Plant 1234
The above scenario will post okay. We don't want it to as Order 2 has never had anything to do with material 123456789.
Any help is greatly appreciated.
JamesShakti,
You did not read my problem.
As I have said using MIGO to reverse the 261 does not check if the material was issued to that order. If I wanted to I can 262 back to an order that I've just found randomly....
My question was how can we get SAP to check whether the order we used has issued that material before (in the 261). -
Movement type that does not register consumption
When my client regularly moves material from plant A to plant B and consumes it in the production operaiton at plant B. When they want to move excess inventory BACK from B to A it registers consumption at plant B - and makes it appear that they are consuming more than they actually are. This causes the reorder point for that material to increase and the buyers are given signals to re-order the excess material back to plant B! Is there a movement type that can be used to ship excess inventory back to the original plant, using a stock transfer order, that will not register consumption?
Thanks,
NedHello Nethe, please tell us which is the movement type used to return the goods.
From a planning point of view it can be seen as a withdrawal of material, but it should be a transfer movement (i.e. 3xx)
Regards -
Error in MIGO Movement type 101 E is not planned.(Entry is not copied over)
Hie Experts,
I had created a process order for XYZ material. Now i want to assign this goods receipt to sales order. For this i am trying to go MIGO with mvt type 101 & special stock indicator as 'E'(order stock). I am facing the error as "Movement type 101 E is not planned. (Entry is not copied over)".
Can anyone help to solve this error.
Regards,
PiyushHie,
Thanks for your valuable response. But, my scenario is like this. I am doing goods receipts against PRODUCTION Order.
I want to take this stock as Sales order stock(Special Stock).
Can u pl help me for this scenario.
Regards,
Piyush -
Some key figure are not update for movement type 101
Dear All,
I have done load for Inventory and now i am finding that for some material the with movement type 101 the key figures are not getting populated, for these materials the values in characteristics is getting populated fine.
I have loaded the data according to stranded procedure in "How to Load...."
I have checked the values of material in R3 and it is there.
Example of the record::
Material Plant Movement type Calender Day quanity Base Unit
10101 01 350 01.02.2006 20 KG
10101 01 101 05.07.2006 KG
10101 01 101 10.07.2006 KG
The Quantity is not appearing in second and third record.Hi,
Please check whether you have set ''Rule groups'' at transfermation level . There you can set the conditions like materials having movement type X can be updated to one Key Figure and material having movement type Y can be updated to another Key figure.
Please check whether you have set this option at transfermation level.
For example, may be in your case materials from different plants are updating to different key figure.
Thanks,
Edited by: kavitha nagandla on Feb 17, 2010 7:19 AM -
Error: Device type SWIN does not support page..
Hi All,
I'm working on smartforms which print sticker of size 5 cm width and 2.5 cm hight. I made page of same above mention size. but when i'm trying print this, it will show following error:
Device type SWIN does not support page for ZSTICKER(my page name).
Please do needful help ASAP.
-DharmeshHi,
You need to link your new page to a device type. Use transaction SPAD. Go into the device type and click on the 'Format' button, this will list the supported formats, switch to change mode and add your new page format (ZSTICKER).
Regards,
Nick -
Movement type 101 Q is not planned. (Entry is not copied over)
Hi,
I have created a purchase order with account assignment to WBS element.
While i am trying to create migo using 101 Q movement type, i get the following error.
"Movement type 101 Q is not planned. (Entry is not copied over)"
if i post the migo using only 101 (without mentioning Q), project stock is not shown.
Please help me create a GRN with project stock.
Cheers!
AUNhI,
check whether below link useful or not.
Movement type 101 Q is not planned. (Entry is not copied over)
Maybe you are looking for
-
Help computer will not boot up!
Hi, I followed the guide on PBfixit.com to replace my hard drive. After doing so, putting it back together, the computer will not start up, no chime. When plugged it it has the green light on, showing power. Help! Any suggestions would be thankful..
-
Haven't seen definitive answer... Hyperlinks don't work
I am using iWeb 08 and I have created a links page (http://web.mac.com/a_arredondo/HarmonicesGaudi/Links.html) and for the life of me I can't get the links to work. They work just fine in iWeb but not on the published site. The underlined titles are
-
Macbook won't show detect displays need help???
Won't detect any, but says I need 2 displays sometimes??? Help
-
Everything I sent I cannot see anymore. It's like all my sent items erased.
-
Windows won't show up on start up
Hi, I finally managed to get boot camp working and save an Windows .ios file to my samsung 3.0 Hardrive however when I press alt on the start up only the macintosh HD and the recovery disk shows up. I dont think it's a problem with the ios file itsel