Movement Type 341 not seen in MIGO

Hi all,
I need movement type 341 for transfer posting with SLocs within same plant (Unrestricted use to Block stock) but i could not find the MType 341 in MIGO for transfer posting..
Could any one let me know how to go about this configuration?
Regards,
Sachin Narvekar,Mumbai

Hi
If you want to transfer the stock <b>from Unrestricted to Blocked,</b> then in MIGO Transaction Use <b>Movement type: 344.</b>...It will solve your Purpose.
<b>Dont use 341 movement type for this purpose</b>.
Reward if useful
Regards
S.Baskaran
Message was edited by:
        baskaran srinivasan
Message was edited by:
        baskaran srinivasan

Similar Messages

  • Movement types data not capturing from BW cube data load

    Dear Experts,
    We are supporting BPC 10.0 Netweaver consolidation activities.
    As a part of the monthly consolidation, we are loading the ECC data available in the BW cubes into BPC.
    0FIGL_C10 cube: From this standard cube we are capturing the movement types (i.e, transaction type details) for the balance sheet items. So opening minus closing should be equal to the movement types.
    ZFIGl_CA10  : From this cube the YTD closing balances of the balance sheet items are captured.
    Opening balances are copied from the last period of the previous year through balance carry forward.
    For a balance sheet itens, we are getting the F99 closing balances correctly captures.
    But, the movement types are not getting captured correctly and the difference between the (opening + movements) - closing is sitting the controls.
    I have tried to check ECC data for these accounts in FS10N and 0FIGL_C10. The monthly data is all flowing properly. But when coming into BPC movement type alone has the problem.
    The transformation and conversion has all worked fine time June 2014 but July 2014 it has incorrect figures.
    No modifications are done for both the file.
    Please find the below attached screen shot and kindly help me on the same.
    Regards,
    Shilpa

    Hi Shilpa,
    I had the same problem in mi last consolidation implementation and the solution in this case was
    implement all the data flow for the 0FI_GL_014,
    Regards,
    Mario

  • WM movement type 255 not allowed for warehouse number 008

    Hi,
    Error message "WM movement type 255 not allowed for warehouse number 008" pops up during creation of outbound delivery. I checked the schedule line for this sales order, it was actually tagged to movement type 631 instead of 255. There ain't any movement type 255 at all. How to solve this?
    Thanks.

    Hi,
    Check in Customizing for Define Movement Types where for the given warehouse number movement type 255 is assigned.
    Path is,
    Logistics Execution - Activities - Transfers - Define Movement Types.
    Check for 008 Movement 255 is assigned or not.
    Thanks
    Krishna.

  • In Upgraded from 4.6c to ECC 6.0 Cust.Movement type is not availablein MIGO

    Hi Experts,
    We have done SAP upgrade from SAP 4.6c to ECC 6.0.
    There is a costomized Movement type Z01 and Z02 for goods issue to cost centre in 4.6c and working fine.
    Now after upgrade those movement types Z01 and Z02 are not appearing for selecting in MIGO transaction.
    Please suggest me what are the check points I have to cross verify or is there any note has to be apply
    Your fast responce is more valuable.
    Thanks
    Reshma

    Check OSS Note 700015 - MIGO: Customer-specific movement types cannot be used
    Regards

  • Movement Type 309 Not posting to the correct Cost Center

    Hi,
    We have changed the field status group for movement type 309 to be able to enter profit center. We maintained a cost center determination in OKB9 based on the profit center. However the system is ignoring the profit center entered in the MIGO (309) and picking the profit center from the material master.
    Material Master has Profit center 40000.
    MIGO posting has Profit Center 43005 which in turn has a cost center assigned to 100143005 cost center.
    When we do MIGO 309, with the profit center 43005, the accounting document is posted with profit center 40000 and cost center 100140000. Can anyone tell why is it ignoring the profit center maintained in the transaction?
    I also checked OMJJ and checked the "Account Assignment" box for transaction type AUM.
    Thanks and Regards
    Madhu Vutukuri

    HI,
    check SAPNET note 105024.
    Best regards, Christian

  • GR quantity for movement type 101 not updated in PCA

    Hi,
    Does anyone have an idea why quantity is not updated in GLPCA-MSL for 101 movement type?. It has updated in FI (BSEG-MENGE) but not in PCA (GLPCA-MSL).
    Appreciate prompt response.
    Thanks,
    Rashmi

    Hi
       With note 834458 a statement for activity RMWE was introduced but removed again with note 962731 as this caused double quantities in PCA. Please read these 2 notes and check the coding in your system.
    regards
    Waman

  • MB1C - Sloc 0001, Mov type 561 (not able to post the goods)

    When I post inventory for ROH material
    using movement type 561 (Tcode:MB1C) with
    SLOC 0001, the system errors outs with the following message
    "Material XXXX doesnot exist in warehouse 001"
    Iam not maintaining warehouse management for ROH materials.
    But I am able to post for the same material with Sloc 0002
    Its the issue with sloc 0001
    System posts the following Message:
    Material XXXX does not exist in warehouse 001
        Message no. L9023
    Diagnosis
        All the materials that you use within a warehouse number must also be
        defined for this warehouse number.  The material you are using is not
        defined.
    Procedure
        If you want to use the material within your warehouse number, you must
        create the material in the material segment for that warehouse number.
    Is there any workaround, where I need not maintain WHSE management view for ROH
    materials but still able to post the goods with Sloc 0001

    Csaba/Rajesha:
    Thank you for your replies
    For the Sloc 0001, like mentioned it is assigned to whse number 001
    I tried to remove/delete the whse number 001 for the sloc0001, but its a entry required
    field
    In order to fullfill the requirement, maintained the same whse number(HMM) that is
    being maintained for sloc 0002 {for which I was able to post (Mvt type 561, Tcode MB1C)}
    In MB1C Mtype 561 posted with sloc 0001, Now the system posts
    "Material XXXX doesnot exist in warehouse HMM" (previously it gave "Material XXXX doesnot exist in warehouse 001")
    It does not give the message for Sloc 0002
    Any way in this process, I learned some new things
    Due points have been assigned

  • Excise tb not seen in MIGO

    hi all,
    for cenvat material for which GR already done for many time for same vendor with capturing all excise duties,
    but now it is not showing excise tab while migo. How  it is possible & why it is happen ?
    i check all necessary entrie like J1ID, vendor information, in excise, everything is available.
    please help me.

    Please check the tax code used in the Purchase Order and also check whether the plant for which you are doing GR is Excisable or not
    Hope this will help you...
    Enjoyyyyyyyyyyyyy
    Akshit

  • Transfer posting with Mov Type 311E in MIGO with reference to SC-PO

    Hi,
    I am working with MTO scenario.
    I want to carry out transfer posting of material with movement type 311E against subcontracting Purchase Order which is sale order specific.
    However, system does not allow me to do the same. whenever transfer posting, PO & movement type is selected in transaction MIGO, item details entry tabs are displayed blank.
    Below steps are being follow:
    Scenario is MTO ( special stock subcontracting)
    1. Subcontracting PO no. 4500000147 against Sale Order no 61 created.
    2. RM code - 61, available stock 100 TO & batch no.0000000127
    3. Transfer material to vendor for processing through MIGO ( since it is a special sales order stock, transferring happens from SL 0001- Main Stores to SL VLSC -Virtual storage location) using movement type 311 E
    5. Item Data details tabs are blank.---This is the issue / error.
    Note: I am restricted to post transfer posting through MIGO-Transfer Posting (will not use MB1B) due to some enhancement of MIGO and interfaces with legacy system.
    Please have a look on attachment for SAP screen issue.
    Regards
    Mohit Jaiswal

    Hi Mohit ,
    please check below link , you need to perform steps as given
    http://help.sap.com/saphelp_470/helpdata/en/4d/2b90b043ad11d189410000e829fbbd/content.htm
    also see the sales order subcontracting using the business addon
    http://help.sap.com/erp2005_ehp_04/helpdata/en/c7/2587b8dad94c52854ccd28015dceb0/frameset.htm

  • MIGO Goods Receipt multiple Movement Types?

    Hi,
    Is it possible with MIGO Goods Receipt using Inbound Deliveries to have multiple movement types? the reason I ask is I am getting the following error 'BORGR622 Movement Type XXX not allowed; only 101 is allowed' when trying to receipt a Line no. with different Movement Type to the earlier lines.
    We do have the same problem if we receipt in MIGO Goods Receipt directly to the Purchase Order, we can happily post a document which has the normal '101' movement type and another Custom movement type.
    The reason for the requirement is to do with Account Determination, we have free bonus goods lines which are zero price on the purchase order - the price difference gets posted to a bonus stock account instead of the usual price difference account, by using a Custom Movement Type - the bonus stock agreement (kind of like BOGOFs Buy One get one free) is passed to the Customer with similar account determination updating the same bonus stock account.
    This works fine for MIGO receipt directly with the Purchase Order but we get the error message above with Inbound Deliveries.
    I cannot see anywhere obvious in config which might sort this issue, but am unsure why multiple movement types on a Goods Receipt would be allowed against a Purchase Order but not an Inbound Delivery.

    Hi,
    Try with the below mentioned settings,
    goto SPRO -> Materials Management -> Inventory Management & Physical Invetory -> Settings for enjoy transactions -> Settings for good movements(MIGO) -> Settings for transactions & reference documents -> select MIGO_GR -> Click on transaction/event -> select goods receipt -> click on reference documents -> remove the tick mark on active.
    Regards,
    Prabu

  • Difference between header and item movement types in MIGO

    Dear all,
    what is the difference between movement type entered in header of MIGO and item level?
    not all movements are possible in header. how it is controlled? may not be in OMJJ
    thanks and regards
    gajanan

    Hi Gajanan,
    Movement types in Standard SAP are predefined. You can also create a new movement type, but generally it is not required.
    In MIGO ,movement types on right hand side corner changes as per the transaction your are carrying out in header level like
    Good reciept, Good issue, , Cancellation, subsequent adjustment, Remove from storage, placer in storage etc.....
    As you go for transaction and make allocation in the allocation field, the movement type changes.
    Regards,
    Tushar Patankar

  • Goods Issue not possible with ref to Reservation using 201 mvt type when reservation created by 311 movement type

    HI MM Folks,
    My requirement is reservation should be created with 311 movt type. When we do good issue with 201 movt type with reference to reservation
    system is throwing an error "Goods movement not possible with mvmt type 311". Due to MRP run we should create a reservation using 311 movement type but not 201 mvt type, (If we create a reservation 201 movt type, during MRP run automatically reservation quantity also taking into consideration, to avoid this we will be creating reservation as 311 movt type). Is there any enhancement to available to reach the requirement. If it is possible give me guidelines.
    your help will be highly appreciable.
    Regards
    Vinay

    Dear,
    Movement type 311 is for doing transfer posting from storage location to storage location with single step.But Movement Type 201 is to have consumption entry with respect to cost center etc...
    You are creating a reservation using 311 movement type and while posting the entry you are selecting the"Executable action in MIGO" is "A08-Transfer Posting" so system will always use the movement type used at the time of reservation only.Here you can not change.
    And more over if you process entry with 201 movement type system creates accounting documents but with movement type 311 system will not create accounting documents.
    Regards,
    Pardhu

  • 103 movement type not getting extracted

    HI Gurus,
    103 movement type is not getting extracted in 2lis_03_bf.
    Do we need to do any config/code for this ??
    Regards,
    Sunita

    hi,
    Your specific error and resolutiobn is explained in
    SAP Note 827178 - 2LIS_03_BF/_UM: Individual documents not extracted
    https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=827178
    we had done the changes mentioned in the above note and resolved the issue in our system.
    regards,
    Arvind.

  • Getting serial number box while transfer post in MB1A but not while doing MIGO

    Hi Team
    I am getting serial number box while transfer post in MB1A.
    But getting below error under serial number tab while doing GR through MIGO of outbound delivery.
    Issuing plant and receiving plant, material, batch, qty are same in both cases.
    How can I get serial number box when doing GR? Does any customizing changes needed?
    Br, Kiran U

    Movement type is different for those two screen shots, also you are saying you are using MB1A, but you are using 301 movement type. Generally 301 movement type is not allowed from MB1A t-code.
    Please check these SAP notes if relevant for your case.
    856548 - MIGO: you cannot enter serial numbers
    856662 - T156Q: Missing entries

  • Movement type for production Reversal-102

    Hi Experts
    Our client has a requirement as such what transaction MB31 is providing for reversal of Production order,we can do only 4 at a Time.
    Our client requires same thing to be done in migo against production order so that we can reverse production 14 lines at a time(i,e 14 different Pos).
    I tried in MIGO i got error message
    Update control of movement type is incorrect(entry 102X x )
    Can we configure this movement type or not.
    Regards
    Sandeep Patil

    asfar as reversing PO isconcerned it is not a good idea to use MIGo or MB31 as the childpart consumption is not increased automativcally.
    So you should try CO13,where you can reverse 1 PO at a time
    and automatically 262 also takes place.
    Moreover why is that you have to revers so many POs which is a bad practice.

Maybe you are looking for

  • How can I add JScrollpane to one of the panels of a JFrame????

    I want to generate a screen with one JFrame and two JPanels.one panel to the left of the Frame and another to the right. I want to add a Jscrollpane to left panel,to which i am adding images so that they can be scrolled.How can I achieve this ???????

  • My BBM is not working well

    Hi, please I need A̶̲̥̅ help anytime I send A̶̲̥̅ friend request from M̶̲̥̅γ̲̣̣̥ BBM the people I sent it too will not see it but the contact will be on M̶̲̥̅γ̲̣̣̥ pending list but they send to me I can accept and chat with them what can I do to reso

  • Fault message handling in BPM workaround?

    Okay so we all know by now that SAP does not support fault messages in their ccBPM implementation of the BPEL standard. My question is this. Does anyone have a viable work around for a SOAP (or any other) interface? I have altered my calling interfac

  • How do I composite with a matte and fill ?

    Hi all, If I have for example, a image of the desert for the background. And then I have a logo I want to add over it. And that logo comes with a matte and fill. How do I composite that over the desert image ? I've tried working with the (add image m

  • How can I get my CDs to import with the latest iTunes?

    I have PC, currently operating on XP and the latest iTunes update. I have tried several CDs, and none will pop up with any information on what to do with it. Please help