Movement type 647 does not currently support serial numbers management

we can't do "shipment start/PGI for DOWN shipment 1178184 DN# 40309339.
Error message " Movement type 647 does not currently support serial numbers management" see also attachment
Error is like that
Stop : Save Shipment
Stop : Shipment 0001178184 :Action for Shipment start
Read Activities profile ZPGI
Main issue
Stop: Movement type 647 does not currentely support serial number management.
Delivery 001114455 in shipment could not be posted GI
Ssome problem with the movement type 647.
what I understand is, its a SD movement which place the material in transit and automatically executes
the 101 movement. If possible please help in this matter.
Pls help what exactly issue and resolution .
Regards
Vicky

Check this thread
[STO with delivery in 1 step (mvt. type 647) with serial numbering |STO with delivery in 1 step (mvt. type 647) with serial numbering]
thanks
G. Lakshmipathi

Similar Messages

Movement type 317 does not currently support serial number management

Movement type 317 - support serial number management?
We are using SAP ECC 6.0. and trying to create a structured material from constituent components with the WM 317. The components are using serial numbers. When we try to post the material document we get an error message:
u201CMovement type 317 does not currently support Serial number managementu201D
Movement type 317 does not currently support serial number management
Message no. IO306
Diagnosis
With the help of * under the business operation, the entry in table T156S used here under movement type 317 defines that no serial numbers are supported here.
System Response
Termination of the transaction called up.
Is any new availability which support serial number management in warehouse movement 317?

Is the scenario relates to Retail ?? Movement Type 317 is used for Creation of a structured material from constituent components (Retail). Check Note 131969 - Recommendation: Store returns in SAP Retail Release 4.0
thanks
G. Lakshmipathi

Movement type 124 does not currently support serial number management

Movement type 124 does not currently support serial number management
when I post goods return in qa12, the system shows movement type 124 doesn't support serial number.
Could anyone can tell me where I can set the movement type for serial number?
John

Unfortunately it is impossible to post a return delivery from the usage-decision for a material with serial number profile, which is in goods receipt blocked stock. This is is missing functionality
The possibility in the standard would be the following :
1. Close the inspection lot. Please do the stock-posting in a way, that you post to 'GR blocked stock'. Remark : No physical is done. This is only necessary to achieve, that status SPCO is set.
2. Post the reutrn delivery with the MM-IM-transaction (e.g. MIGO).
Please check, if this is possible.

Movement type 101 does not currently support serial

Hi experts,
I'm trying to realize MIGO for a PO with a material with serial number.
The error msg is " Movement type 101 does not currently support serial number Management." IO306
I already config. spro>plant maintenance & customer service>master data in plant maintenance & customer service->technical objects>serial number management-->define serialization attributes for movement types
And
Plant Maintenance and Customer Service -->Master Data in Plant Maintenance and Customer Service -->Technical Objects --Serial Number Management -->Define Serialization Attributes for Movement Types
And assigned the material to attributes ate MM02.
I have know ideia what else i have to do.
Is there anone here already see that?
Tks
Antonio Oliveira

try posting GR via MB01 transaction instead of MIGO and let us know if you are getting same issue.
also there are few OSS notes created for this kind of issue which has to do with maintainenance of table V_T156SY, check below thread
Movement type 101 does not currently support
yogesh

Movement type 101 does not currently support

Dear Experts
there is an error occur at the Time of MB31 with 101 Movement type
Movement type 101 does not currently support serial number Management.
Rgds
Pankaj

Hi
Serialization config is missing for 101.
Check in below config
spro>plant maintenance & customer service>master data in plant maintenance & customer service->technical objects>serial number management-->define serialization attributes for movement types
Check with the help of PM or CS consultant
Regards
Antony

Target does not currently support account discovery

What does the message "Target does not currently support account discovery" means?
I am getting it while using OPAM REST API to get the accounts from a given resource.
How can I make it support it?
TIA
Leo

I would suggest waiting a day or two. YouTube has their standard flash format that will play on a web browser, but they also have an h.264 format that will play on the iPhone. It may take some time before they create the iPhone version. Similarly, it may take some time for YouTube to post a high def version.

There were no results for I've downloaded the kindle app to my new iPad4 but when I went to Amazon UK and tried to download a book it said "this mobile app does not currently support digital downloads. I don't understand! I'm in the UK.

There were no results for I've downloaded the kindle app to my new iPad4 but when I went to Amazon UK and tried to download a book it said "this mobile app does not currently support digital downloads. I don't understand! I was told you could download kindle books from amazon straight to iPad if you download the kindle app first. Do I have to do it onto my computer and then sync it onto iPad? surely not?

Can you go here:
http://www.amazon.co.uk/Kindle-eBooks/b/ref=amb_link_173148087_8?ie=UTF8&nav_sdd =aps&node=341689031&pf_rd_m=A3P5ROKL5A1OLE&pf_rd_s=center-1&pf_rd_r=1GDPPW8ZCN9Y 9NQF5VV0&pf_rd_t=101&pf_rd_p=365751407&pf_rd_i=468294
and not log on. See what you can do.

Customize Movement Type : Reverse is not update the Serial No Status

Hi All,
Customize Movement Type : Reverse is not update the Serial No Status from ECUS to ESTO when reverse Delivery Order movement document.
Mind to guide where to check this configuration problems.
Thank you.

Hi All,
For the Customization Movement Type, Initial plan is copy from 602 but found out below different on Trans./ev serial no. Not sure the problems is from this site > How to change the configuration.

262 Movement Type Issue - Does not check order

Hello,
A material is issued via a 261 to an order.
Say this order is now complete and we want to do a 262 back into stock SAP does not check whether or not the material had ever been issued to the order I entered in my 261.
Is there anyway we can have a 262 movement type check whether the material is in the order we enter?
N.B. I am aware we can use MBST, however this doesn't help for partial reversals.
E.G.
MIGO - 261
Material     123456789
Order2       123XYZ
Plant          1234
MIGO- 262
Material    123456789
Order2      RANDOMORDER
Plant        1234
The above scenario will post okay. We don't want it to as Order 2 has never had anything to do with material 123456789.
Any help is greatly appreciated.
James

Shakti,
You did not read my problem.
As I have said using MIGO to reverse the 261 does not check if the material was issued to that order. If I wanted to I can 262 back to an order that I've just found randomly....
My question was how can we get SAP to check whether the order we used has issued that material before (in the 261).

Movement type that does not register consumption

When my client regularly moves material from plant A to plant B and consumes it in the production operaiton at plant B. When they want to move excess inventory BACK from B to A it registers consumption at plant B - and makes it appear that they are consuming more than they actually are. This causes the reorder point for that material to increase and the buyers are given signals to re-order the excess material back to plant B! Is there a movement type that can be used to ship excess inventory back to the original plant, using a stock transfer order, that will not register consumption?
Thanks,
Ned

Hello Nethe, please tell us which is the movement type used to return the goods.
From a planning point of view it can be seen as a withdrawal of material, but it should be a transfer movement (i.e. 3xx)
Regards

Migo (Movement type 101) does not update quntity in the report.

Dear experts,
I have a custome report for goods receipt (ABAP Query).
In this report, quntity (unrestricted stock) is not updated when I do MIGO (mType 101). The quntity however, is updated in MMBE unrestricted stock columm after MIGO.
Could you please help me how to make quntity updated in the report when I do MIGO with movement type 101?
I thank in advance for all replies.
Jaan
Edited by: Bhajan Singh on Feb 9, 2010 10:19 AM

Thanks R.S. Nambi for your rpely.
The question is solved.
I went to query, then Additional fields and picked movement tyep-quntity field, went to Local fields and added complex calculation for mtype 101.
I am going to close this thread.

Does not recognize the serial numbers that were emailed to me

I purchased Photoshop Elements 13 via the Web however the version is for Windows and I'm using a Mac. The serial numbers given to me won't work. I don't know how to get in touch with Adobe, I can't find contact information. Any help with this is greatly appreciated. Thanks. Darlene

John, I purchased direct from Adobe. Tried the phone number and after going through all the prompts on the voice message it then said it doesn't offer phone support for what I was looking for. Tried online support but it's closed now. I've honestly never experienced having such a hard time trying to contact a Company before. I feel lille I'm running in circles. I know it was my error but I'm still hoping they can help by giving me the correct version of Software. I paid for it so hoping to get the resolved. Thanks for trying to help me

Error: Device type SWIN does not support page..

Hi All,
I'm working on smartforms which print sticker of size 5 cm width and 2.5 cm hight. I made page of same above mention size. but when i'm trying print this, it will show following error:
Device type SWIN does not support page for ZSTICKER(my page name).
Please do needful help ASAP.
-Dharmesh

Hi,
You need to link your new page to a device type. Use transaction SPAD. Go into the device type and click on the 'Format' button, this will list the supported formats, switch to change mode and add your new page format (ZSTICKER).
Regards,
Nick

Selected file cannot be linked because its type (video) does not match the original file's type

I've been using Premiere Elements 9 for a couple of years now, and a few months ago I began having problems importing AVI files created from a BlackMagic Intensity Pro capture card. (These issues were not previously occurring, and since they surfaced, I have exhausted the various settings for the BlackMagic card, used various software such as BlackMagic's own Media Express as well as the freeware VirtualDub, and still have the following problems.)
In addition, these AVI files play just fine, in their entirety, using Windows Media Player and in Quicktime.
The problem (or possibly two, but I suspect they could be related) is that most of the AVI files I attempt to import will either (1) import all video and NO audio, or (2) import ONLY a short segment of audio and video, and the length that Elements imports varies. Usually only in the range of a minute or two. The rest of the file is not imported at all.
After much digging in forums, and testing various settings in trying to figure out the issue, I decided to back up all of my files and completely wipe all hard drives and start over with a fresh installation of Windows and Premiere Elements 9. I haven't installed much else yet, as I wanted to first find out if the reinstallation improved things with Elements.
For the first project I created in Elements after the reinstallation, Elements successfully imported an entire AVI that was nearly 2 hours long, audio and video. This was a file that previously would not import properly into Elements. This suggested that my earlier installation of Elements must have been corrupted somehow. At this point I was very hopeful that all was well.
I proceeded to edit the video as I had wanted, saved the project, and exported it to an MPEG format file. I had originally wanted to export it as an MOV, but I hadn't yet installed Quicktime, so Elements couldn't do that just yet. The MPEG export was successful and plays fine.
However, I then installed Quicktime, and once it was finished, I restarted the PC and reloaded the same project. This time, Elements claimed the media was offline. I double-clicked on a segment of the video, and directed Elements to the raw file, but then an error message popped up: "The selected file cannot be linked because its type (video) does not match the original file's type (audio and video)." This was the same file I had JUST edited and of which I created an MPEG.
I tried creating a new project and the "Get Media" function to import the AVI again, but this time only the video imported with NO audio. (This would explain why the error message said what it did, but not why the audio wasn't imported.)
What in the world is going on with Elements??? I am baffled since the ONLY task I have done on this machine after a complete reinstallation of both Windows and Elements is edit one AVI. I find it very hard to believe that just installing Quicktime caused this.
Some info on my system:
System: Asus P6T w/ Intel i7 920 and 12 GB memory
OS: Windows 7 Ultimate
Video Software: Premiere Elements 9
Capture Card: BlackMagic Intensity Pro (PCI-e)
Capture Software: AVIs recorded with either BlackMagic Media Express or VirtualDub (only prior to the reinstallation, as neither of these programs are currently installed)
I'm getting to the point with Elements that I might need to just abandon it and find something else that is more reliable. Anybody have suggestions to help with this, so I won't have to migrate?

mtnsports
We think that we need to start off with definiting the properties of these .avi files that you are importing into Premiere Elements 9.0/9.0.1 (assumed that you are working for the required 9.0.1 Update).
You say that the "avi" was created from a "BlackMagic Intensity Pro capture card". What are the properties of this .avi that you imported into Premiere Elements? Not all .avi are created equal. What is the video and audio compression, frame size, frame rate, interlaced or progressive, pixel aspect ratio, typical duration?
Based on the properties of the video what have you been setting as the project preset?
Let us start here.
More later.
ATR

ORA-12514: TNS:listener does not currently know of service requested

While connecting "sqlplus SYSADM/SYSADM@HCM" I am getting the below error:
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Installation background:
Windows 7 l(64-bit) laptop.
Created linux virtualbox to installl peoplesoft VM templates.
so far installed: Oracle11gR2.vdi and HCMDB.vdi on the linux virtualbox.
Followed the steps exactly what it is in the link below: Got the above error in page 4 of the link at connecting to database via sqlplus.
http://bloggingaboutoracleapplications.org/running-oracle-vm-templates-oracle-enterprise-linux-guide-part-1-7/
Below provided initHCM.ora, tnsnames.ora, listerner.ora and some responses I tried. I could not figure out what causing the issue even after researching in web.
Your help would be highly appreciated.
tnsnames.ora:
=============
# tnsnames.ora Network Configuration File:
HCM =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = hcmdb91)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = HCM)
Listener.ora:
=============
# listener.ora Network Configuration File:
/u01/app/oracle/product/11.2.0.x/db_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = hcmdb91)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
initHCM.ora:
============
DB_FILES =256
OPEN_CURSORS = 1000
db_block_size = 8192
remote_login_passwordfile = NONE
undo_tablespace=PSUNDOTS
NLS_LENGTH_SEMANTICS=CHAR
# Cache and I/O
#db_block_size=
db_file_multiblock_read_count=16
# Database Identification
# db_domain=us.oracle.com
# db_name=
# Diagnostics and Statistics
#background_dump_dest=
#core_dump_dest=
#user_dump_dest=
# Job Queues
job_queue_processes=10
# Processes and Sessions
processes=150
# SGA Memory
sga_target=287309824
# Security and Auditing
#audit_file_dest=
#remote_login_passwordfile=EXCLUSIVE
# Shared Server
dispatchers="(PROTOCOL=TCP) (SERVICE=XDB)"
# Sort, Hash Joins, Bitmap Indexes
pga_aggregate_target=95420416
# System Managed Undo and Rollback Segments
undo_management=AUTO
#undo_tablespace=
unnestsubquery=false
# Miscellaneous
compatible=11.2.0.2.0
control_files=(/u01/app/oracle/oradata/HCM/control01.ctl)
DB_NAME=HCM
[oracle@hcmdb91 ~]$ tnsping hcm
TNS Ping Utility for Linux: Version 11.2.0.2.0 - Production on 28-MAR-2013
07:40:37
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST =
hcmdb91)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME =
HCM)))
OK (20 msec)
[oracle@hcmdb91 ~]$
[oracle@hcmdb91 ~]$ tnsping hcm
TNS Ping Utility for Linux: Version 11.2.0.2.0 - Production on 28-MAR-2013
07:40:37
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST =
hcmdb91)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME =
HCM)))
OK (20 msec)
[oracle@hcmdb91 ~]$ lsnrctl start
LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 28-MAR-2013 07:41:32
Copyright (c) 1991, 2010, Oracle. All rights reserved.
TNS-01106: Listener using listener name LISTENER has already been started
[oracle@hcmdb91 ~]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 28-MAR-2013 07:42:20
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=hcmdb91)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.2.0 - Production
Start Date 28-MAR-2013 07:29:21
Uptime 0 days 0 hr. 13 min. 1 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File
/u01/app/oracle/product/11.2.0.x/db_1/network/admin/listener.ora
Listener Log File
/u01/app/oracle/product/11.2.0.x/db_1/log/diag/tnslsnr/hcmdb91/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hcmdb91.example.com
)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
The listener supports no services
The command completed successfully
[oracle@hcmdb91 ~]$ lsnrctl services
LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 28-MAR-2013 07:42:44
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=hcmdb91)(PORT=1521)))
The listener supports no services
The command completed successfully
[oracle@hcmdb91 ~]$
[oracle@hcmdb91 ~]$ sqlplus SYSADM/SYSADM@HCM
SQL*Plus: Release 11.2.0.2.0 Production on Thu Mar 28 07:44:25 2013
Copyright (c) 1982, 2010, Oracle. All rights reserved.
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in
connect descriptor
My guess is that the database service "HCM" is not up and running but not sure how to make up and running. Even I could not find it listed in the linux services list.
Note: Able to login sqlplus using "sqlplus sys/sys as sysdba" but failing to access database table as "select * from PSRECDEFN;"
thanks
Espii.
Edited by: 995437 on Mar 28, 2013 6:52 AM
Edited by: 995437 on Mar 28, 2013 6:59 AM

Hi Nicolas,
I have no luck and the error still persists.
I have set the "export ORACLE_SID=HCM" from root user and oracle user too.
I guess, I have already loaded database when I ran the "cd /opt/oracle/psft/vm
./oraclevm-template.sh"
The outcome of the above script as similar as below:
Creating
ovm_configure_pre
CreateVirtualEnvironment
/u01/scripts/db-reconfig.sh: line 238: ovm_set_password: command not found
/u01/scripts/db-reconfig.sh: line 239: ovm_configure_network: command not found
INFO:
Starting Oracle database reconfiguration.
Oracle Database Configuration
This will configure on-boot properties of Oracle Database.
The following questions will determine whether the database should be
starting upon system boot, the ports it will use.
Press <Enter> to accept the defaults.
Do you want to relink binaries? (y/n) [n] y
Specify a port that will be used for the database listener [1521]:
Do you want Oracle Database to be started on boot (y/n) [y]:y
Wrote to /etc/sysconfig/oracle11g
Relinking Oracle Binaries...
Oracle Relinking Completed Successfully
Logs: /home/oracle/relink.log
Running orainstRoot.sh and root.sh...
set 2GB tmpfs
Enabling Oracle Database service
Configuration Completed Successfully.
Enter the name of the database SID [TESTDB]:HCM
ORACLE instance started.
Total System Global Area 288104448 bytes
Fixed Size 2225832 bytes
Variable Size 104859992 bytes
Database Buffers 176160768 bytes
Redo Buffers 4857856 bytes
Control file created.
Database altered.
Tablespace altered.
Tablespace altered.
Tablespace altered.
1 row updated.
160 rows updated.
Commit complete.
Kumar - I have found no sqlnet.ora file exist in the $ORACLE_HOME/NETWORK/ADMIN
Edited by: 995437 on Mar 28, 2013 9:15 AM

Movement type 647 does not currently support serial numbers management

Similar Messages

Maybe you are looking for