Moving multiple clips simultaneously on timeline

Hi!
Is it possible to move multiple clips - lying side by side - simultaneously to a new location on timeline. I know how to move one clip at a time.
Regards.

Drag a lasso around all the clips you want, that will highlight them all. Then move to where you want.
Shane

Similar Messages

  • Moving multiple clips simultaneously..?

    How do you move multiple clips at the same time? I don't mean on the timeline, but in the viewer? ie, firstly selecting multiple clips stacked vertically in the timeline then moving their position or scale in the viewer? How can you do this to all the clips you've selected simultaneously?

    Let Adobe know.
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  • Adjusting audio of multiple clips in the timeline simultaneously

    Is there a way to adjust the audio volume of multiple clips in the timeline simultaneously?

    Or you can send the whole things over to Audition and work in multitrack there. 
    I like to get everything edited in Prmiere and then send the audio (I never bother with a refernce video) to Audition for finish work.  There you can apply effects to individual clips, individual tracks or the entire mix.  I always put a hard limiter on the Master track at -3dB to prevent clipping.  Since this is the last filter in the chain I can boost other clips first and still know that my audio will never be too loud

  • How to apply Time Remap to multiple clips simultaneously

    Quite often after trimming many different clips for a wedding video I will then want the majority of them slowed down to a 50% speed. I know how to apply the Time Remap Speed % change in the Motion Tab, but have yet to figure out how to make the change to multiple clips simultaneously.
    Thanks for your help!

    You can apply a speed change from one clip to multiple clips by copying the first one, then pasting attributes (option + V, then select speed from the list) onto as many clips as you have selected.
    Just be aware that this will ripple your timeline by extending all of your clips. FCP keeps the original out point of the source clip, not the out point of each cut on the T/L.
    Tim

  • Scrolling multiple clips simultaneously when selected

    Does cs6 allow you scroll multiple clips simultaneously when selected.  It seems I can only scroll one clip even the other clips are selected as well.
    I also can't seem to select all clips in just two tracks  (not select all).  3.0 allowed for both of these functions which I use often.

    I'm not sure what you mean by "Scroll multiple clips simultaneously"  Do you mean you want to click-and-drag multiple clips around the timeline?  Make sure none of the selected clips are Locked in Time (right-click menu on a clip, or you'll see a small lock icon in the lower-left corner.)
    There is a menu command to select all clips in a selected track, but currently, this only functions on one track at a time.  If the full timeline is visible, the selection tools should allow you to click-and-drag to select all the clips in consecutive tracks.  We have been enhacing these MT selection tools internally for a future release, but I'll verify that the functionality you've requested is present.

  • How do I add a video effect to multiple clips in my timeline at once?

    How do I add a video effect to multiple clips in my timeline at once?

    or... you can command click to select all the clips you want to apply the effect to, then double click the effect in the Effects browser. (PS - you can't simply drag and drop an effect on multiple clip selections, the effect will only be applied to the clip you drop it on -- but double clicking the effect will apply it to all selected clips at once.)

  • While moving a clip to the timeline cc puts it to the righ instead of on top

    while moving a clip to the timeline cc puts it to the righ instead of on top

    Maybe it can't put it on the track above it because you have the lower track set as the Source Patching destination.

  • Is there a way to apply Time Remapping to multiple clips simultaneously?

    Is there a way to apply Time Remapping to multiple clips simultaneously? I'd like to uniformly speed up and slow down two different clips that are playing in a picture-in-picture setup. I’m hoping there’s a more elegant way to sync them up than just editing their Time Remapping functions individually (I already tried using an Adjustment Layer. It didn’t work).

    you can try nesting the two clips together, then control the time remapping of the nest.

  • Keyframed lens flare across multiple clips in the timeline?

    How can  I apply a keyframed lens flare that continues across multiple clips in my timeline?
    Using keyframes I am trying to have a lens flare travel across several clips in my timeline as one contiunes movement.
    Back in the day (before elements) i could do this in Premiere using something called virtual clips (I think).
    Thanking you in adavance for any help on this or "virtual clips"

    Welcome to the forum.
    Premiere Pro allows for Transparent Video (think the opposite of Black Video, in both PrPro and PrE), but PrE does not have that feature. You are probably thinking of Sub-Clips, also not available directly in PrE.
    Steve's method will work, but here is another to consider:
    Place the WAB (Work Area Bar) over those particular contiguous Clips, and then Publish+Share (for PrE 11, or Share for PrE 7 - 10), and export those contiguous Clips to an AV file. The choice of Publish+Share settings will depend on what you have for your Source Footage, and what your Project's Preset is. If you are working with, say AVCHD, then doing the Publish+Share to matching H.264 will probably be what you want.* In the Publish+Share dialog, make sure to check Work Area, to limit that to JUST the area defined by the WAB. Import that output file into your Project, and replace those edited Clips with it. Apply your Keyframed Lens Flare to that Clip. That is basically a manual Sub-Clip, but with a few more steps, than in PrPro.
    Good luck,
    Hunt
    * For some other options on the output settings, see this article: http://forums.adobe.com/message/4556586#4556586

  • Moving multiple clips together on the timeline

    I have multiple clips on a time line and need to move them together either right or left to accomodate new additions.
    Thank you for any help and God Bless,
    Mark A. Sam

    There are a number of ways of "selecting" multiple clips (including a Tool)
    Lasso them as a group
    Shift-Select them individualy to create a group selection
    Ctrl-A   select all of them ( targeted tracks)
    Track Tool
    and Keyboard short cuts too...
    Select ....and move , nudge, cut, copy, paste, drag......

  • How do you select/move multiple clips from one timeline to another?

    Has to do with combining multiple edls from Avid - required due to an issue with duplicate reel names in the original Arri footage. I can move them one at a time, but it is very tedious. Is there a way to select multiple clips and move them together?

    Actually discovered the magic of the shift key.
    IRCP Beauty doesn't recognize multiple timelines in a session, so first you have to at least get the footage on multiple tracks in the same timeline. Shift + drag on the track will allow you to move it to another timeline. Also Shift + drag on the center of the first clip in a sequence will slide the entire sequence down - which is how timelines end up getthing offset all the time. Also, if there are multiple tracks in a timeline and some are locked and some aren't, Shift + drag on a clip will slide ALL UNLOCKED tracks in the timeline.
    Finally, Shift + click on either in or out marker moves both points up or down the timeline.

  • How do I select multiple clips in a timeline in the reverse direction, e.g. middle to front?

    I know how to click "a" and select clips in the timeline looking forward, but how do we select multiple clips from a middle point to the front of the timeline?  I don't want to be lassoing -- is there some other way?

    Hi denniscallan,
    Please check the track selection tool. Refer to the link below for more information about the tools section.
    http://help.adobe.com/en_US/premierepro/cs/using/WSd79b3ca3b623cac957c49aa9127401b0642-7ff f.html
    Regards,
    Vinay

  • Export multiple clips from one timeline

    Hi,
    Is there a way to export multiple clips into separate files from the timeline. So, basically i have a time line with many clips which i need to export to individual files, not one long video. In FCP 7 I would drag all these clips into a new folder and then batch export. But in FCPX?
    Thanks!

    Of course i's  not "half baked". Just because it lacks a feature that you want doesn't make it so.
    There isn't  as NLE out there that doesn't attract  complaints from some users about its functionality in some area or other.
    Fortunately, the fully functional  trial version gives us a good chance to find out first-hand whether the design meets our requirements.
    Russ

  • How can I replace multiple clips in my timeline w/ an edited version of their original source file

    I have a single audio .wav file that I've already cut up and assembled in in my timeline. If I want to do a noise reduction for the full .wav file in Adobe Audition, is there a way to perform the noise reduction only once, on the original .wav file, and then ensure that the new "audio extracted" file replaces all of the related subclips in clips in my timeline? I'm trying to avoid performing the same noise reduction on multiple subclips, when they originally all came from the same file anyway. I also want to avoid the clutter of adding a bunch more "audio extracted" files to my media.
    In the future, I'll probably need to change my workflow so that I perform the noise reduction first! But in the meantime, is there a clean/ simple way to retroactively do the edit, and replace the edited .wav file with it's respective subclips?
    Thanks!
    Alex

    SAFEHARBOR11 wrote:
    ...turn off other audio tracks, export a .wav (takes seconds)
    and do the Audition work on that and drop into timeline,
    simple and clean.
    This assumes that the .wav file in question
    is only used by itself on its own audio track.
    If there are other audio elements mixed on the track(s) along with
    the .wav file the OP wants to treat with noise reduction, this method
    will require "un-editing" the track(s) before you isolate for export.

  • How do I select multiple clips in the timeline!?

    Ok, not quite as simple as the subject! This is what I want to do:
    Just finished a multi camera edit and I now need to color correct and grade the footage. So, now that I've corrected the color on camera angle number 1 I want to apply that effect to all the clips in the timeline that come from that camera angle. How do I apply that effect to all those clips without having to do some manually. In FCP its possible to search for all timeline clips that come from a specific file. When those are highlighted it's possible to paste an effect onto all those clips.
    So, how do I do that in Premiere Pro CS5?
    Thanks!
    Bradley

    Had to create proxies of my Canon 7d footage to achieve smooth playback but it's worked out fairly well so far!
    I'm surprised that the DSLR Preset for the Canon footage still required proxy files. I thought that would handle the 5D/7D MOV files just fine. Maybe I was mis-informed.
    The good news is that it's working for you, so things are good.
    Good luck,
    Hunt

Maybe you are looking for

  • How to Send Purchase Order in mail( PDF) to vendor while creating it(ME21N)

    Dear Experts, In our current system when ever we create purchase order using the tcode ME21N, based on the output type configured in our system for the vendor a FAX is send to them.. Now we wanted to send vendors a mail with PO as a PDF attachement. 

  • I got a message saying ipad is disabled

    i got a message saying ipad is disabled!how to fix this please

  • Anonymous Client - How Does the Service Endpoint Know Which Operation

    I am using a client (Axis2) to invoke a service through their Anonymous capabilities. When this is done, you create a ServiceClient with the default constructor and call one of its methods based on the MEP that I want to perform. In doing this, the S

  • Do i need firewall / antivirus?

    As the title suggests, im a very long time pc user and have just come over to the Mac by purchasing new macbook pro which is now 2 days old. my question is as well as the built in firewall do i need any other protection like antivirus or firewall tha

  • Budget checking

    Dear guru, i need some idea regarding budget checking. my client wants that budget checking will be available for procurement and consumption.Means while creating PR,PO,INVOICE & PAYMENT  system will check procurement budget &  wihle issueing goods s