Moving to...

hi:
im moving to Texas and i want to know de Iphone's (8g) price including taxes.
(taxes %)or the apple online shop already include it ($299).
thnx
c'ya
Message was edited by: carlosluna699

The state rate is 6.25% plus the city rate where you live.
Where I live, the total sales tax rate is 8.25%, but the total can be slightly different depending on the city.
For example, I lived in Dallas proper from 1989 - 96 and the sales tax rate was 8.25%. Arlington, which is located halfway between Dallas and Fort Worth, had a sales tax rate of 7.25% during that time.

Similar Messages

I moved iTunes music to my hard drive "D" and now it won't open!

My hard drive "C" was getting somewhat full, so I decided to move my iTunes music files over to my second hard drive "D" (I have a dual hard drive on my computer). When I try and open iTunes, it says, "The folder 'iTunes' cannot be found or created, and is required. The default location for this folder is inside the 'Music' folder."
I cannot open the "Music" folder, because when I do, it just opens up the same window I was already in when I tried to open it. The main reason I want to open iTunes is so I can reset my iPod because it is not working anymore. The scroll wheel, the hold button, the backlight, and it automatically sleep mode (after not touching it for a couple of minutes) is all that works. I cannot click anything.
I have moved all of my iTunes folders back over to my "C" drive, but it still won't work. I also reinstalled iTunes in the "Music" folder, and it won't work. Basically nothing has worked!

You might find this article useful, don't be put off by the title, the process is substantially similar moving to another internal drive: iLounge - Managing your iTunes Library on an External Hard Drive

Cannot send email from mail after moving to iCloud

I have just moved to iCloud and now I cannot send email but can still receive email

Hi Judy,
Problem solved.
Go into Mail/Acounts and delete you iCloud account.
Now add a new account and type in your details for MobileMe/iCloud.
It should now work. O noticed the default server name is different.
Hope this helps.
Yours,
Charlie

Have found multiple iTunes Library.xml files. Moved Library to new Hard Drive and it needs to be completely rebuilt?

Hello. I have a Mac Mini operating Mac OS X 10.7.2. I recently had to move my iTunes Library to a new hard drive. I followed the directions on how to move the library and refind everything yet when I do so what comes up is a mere skeleton of what I had. I have had to hunt down my purchased Apps, Music and Movies and re-add them to the library. I also noticed in doing this I have multiple iTunes Library.xml files ... shouldn't there only be one? If so how do I clean this up without doing any accidental damage (i.e. how do I find the one that is being used and delete the rest?)? If I delete the others is there any risk of losing purchased content? Lastly syncing my iPads has become a nightmare as I get the "This iPad is currently synced to another iTunes library" message. Obviously something

It's hard for me to picture the exact situation. It sounds like you still have your library file on the internal but some files on the external, and maybe some on the internal, some of which are in the library and others not... By re-adding things after consolidating it may have made things into a hodge-podge. Yes, that article you referenced says: "iTunes for Mac: Moving your iTunes Media folder"with Media Folder being the emphasis. You probably should have just moved your whole iTunes folder. Still, moving the media folder as instructed should not have messed up the library. Did you make the mistake of starting up iTunes before the external drive had mounted fully and it then told you it couldn't find many files? How you proceed to sort it out will depend upon how much time you want to spend and how important things such as ratings and playcount are to you. I have not actually used the consolidate feature across different drives myself (and don't feel inclined to do so here to test ).
If you are in the USA you can download some previous purhcases with iCloud, but not all.
Here's a bit on what an iTunes folder should look like:
What are the iTunes library files? - [http://support.apple.com/kb/HT1660]
More on iTunes library files and what they do - [http://en.wikipedia.org/wiki/ITunes#Media_management]
Library files with graphic and explanation of different iTunes versions - http://discussions.apple.com/message.jspa?messageID=13169517
Once you get iTunes working off the external drive it should just put new media to the external when you add it.
I have almost no experience with synching (I synched my neice's iPod, once, about 4 years ago).

Please help me open an iMovie trailer, moved to my iPad from my PC. I can view it on my iPad but am unable to import it into the app to edit it.

I created a trailer on an iPad at a workshop to use in my classroom. I retrieved it from my PC and can view it on my iPad mini, but the iMovie app won't open it. I need to edit it. Desperately need help. I want to show it to my students tomorrow. Thanks! I've checked other threads here but can't find a solution.

Hi Leica 42,
I never said that a PP file moved to your ipad cannot be straight edited in keynote. Nor did I say that you needed a third party solution...
My response was to offer an option (Jump) because like many others, you're having problems.
Check out the app store and user Keynote reviews. There are more (by 1) 1 star ratings than 5 star ratings for the current version. There are 72 ratings of 3 or more stars while there are 78 ratings of one or two stars. In terms of statistical significance, the numbers are pretty equal, but I prefer to deal with an app that shows more top stars and fewer bottom stars. Some posters have been on here with your same question, so I'm thinking maybe, just perhaps, Keynote is not perfect.
Pro tech reviews vary, many given at the time it was released. Many do not point out that they actually used Keynote before the review. Google Keynote for more pro tech reviews where reviewers have actually used the app.
http://www.techradar.com/us/reviews/pc-mac/software/business-and-finance-softwar e/apple-keynote-ipad-689424/review
http://www.theverge.com/2013/10/29/5042880/apple-iwork-2013-refresh-complaints
http://www.igeeksblog.com/ipad-presentation-apps/

SSRS 2008 Column Chart with Calculated Series (moving average) "formula error - there are not enough data points for the period" error

I have a simple column chart grouping on 1 value on the category axis. For simplicity's sake, we are plotting $ amounts grouping by Month on the category axis. I right click on the data series and choose "Add calculated series...". I choose moving average. I want to move the average over at least 2 periods.
When I run the report, I get the error "Formula error - there are not enough data points for the period". The way the report is, I never have a guaranteed number of categories (there could be one or there could be 5). When there is 2 or more, the chart renders fine, however, when there is only 1 value, instead of suppressing the moving average line, I get that error and the chart shows nothing.
I don't think this is entirely acceptable for our end users. At a minimum, I would think the moving average line would be suppressed instead of hiding the entire chart. Does anyone know of any workarounds or do I have to enter another ms. connect bug/design consideration.
Thank you,
Dan

I was having the same error while trying to plot a moving average across 7 days. The work around I found was rather simple.
If you right click your report in the solution explorer and select "View Code" it will give you the underlying XML of the report. Find the entry for the value of your calculated series and enter a formula to dynamically create your periods.
<ChartFormulaParameter Name="Period">
<Value>=IIf(Count(Fields!Calls.Value) >= 7 ,7, (Count(Fields!Calls.Value)))</Value>
</ChartFormulaParameter>
What I'm doing here is getting the row count of records returned in the chart. If the returned rows are greater than or equal to 7 (The amount of days I want the average) it will set the points to 7. If not, it will set the number to the amount of returned rows. So far this has worked great. I'm probably going to add more code to handle no records returned although in my case that shouldn't happen but, you never know.
A side note:
If you open the calculated series properties in the designer, you will notice the number of periods is set to "0". If you change this it will overwrite your custom formula in the XML.

Error Message - Moving a Folder

Please help! I just tried to move a folder from my portable hard drive to my MacBook Pro desktop. Therefore, I used the following key combination: "Command + C" and "Option + Command + V". For some reason an error message appears, and I am not able to continue the moving process. I attached the error message as a photo to this question. The Trash actually seems to be completely empty. Nothing seems to be in the trash, and I am not able to remove the error message. When I click "OK" nothing happens. Additional I still can not move the actual file to my MacBook Pro desktop.
Please let me know what to do. Thank you very much for your help.

You can try and find the locked items and unlock them.
Get info (CMD+i), under "General", there's a "locked" checkbox.
Copy and paste is an odd way to move files, but if it works. I'd still rather drag and drop. But maybe that's showing my age (that was not an option until recently).

My ipod touch will no longer download new apps after i updated via apple store.How can i get the updates deleted or correct the problem moving forward?

My ipod touch will no longer download new apps after I updated via apple store.It freezes now when I attempt to download and blanks the app off entirely . How can I reverse the updates or correct the problem moving forward?

Basics from the manual are restart, reset, restore.
Try those

AirPort Extreme extends my network and has worked well for three months. Now it can no longer extend the network and flashes Amber. I have restored to factory settings moved it closer to time capsule and rebooted the system without luck

i have a blinking Amber on my extreme now and it cannot extend the network. It was working fine and nothing has changed. I have restored to factory settings moved it to another room and rebooted the system without luck. Any suggestions

What OS are you running?
Please give me a screenshot of the current AE setup..
I strongly recommend if you have issues.. take control of all the variables. Apple routers have too much auto..
Here is a list that I use for setups when using Yosemite.. but it relates to any OS.
You will need to factory reset again to get going.
Factory reset universal
Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
Then redo the setup from the computer with Yosemite or whatever you are using.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg AEgen5 for basestation.
Use AE24ghz and AE5ghz for wireless on each band, with fixed channels as this also seems to help stop the nonsense.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the AE always takes the same IP address.. this is not a problem for router but if the AE is bridged you can have trouble.. Try using the static IP method or control it via the main router dhcp reservations.
4. Check your share name on the computer/s is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
6. Set up the extend to the Express using 2.4ghz and then see how good or bad the connection is.. this is better in the old v5 utility but if you hover your mouse over where it shows connection an extra chunk of info comes up.
I have specifically used 5ghz to make the extend.. because by testing it works better.. but do not be fooled.. this good connection is poor.. the RSSI.. which is difference signal .. at -79dbm is down the bottom of the stable.. and it drops out on a daily basis.. you want to see that signal around -60dbm at min.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.

2-3 old ipod touch is no longer syncing to itunes library, which was recently moved to new laptop.

Recently moved my library of music, audiobooks, and podcasts to new laptop with Windows 8, at which time I upgraded my itunes software as well. My 2-3 year old ipod touch is no longer syncing properly. Audiobooks and podcasts are fine (after much effort), but all of two songs out of an extensive music library are the only ones syncing. I see them in my library on the new computer and have managed to sync them to my iphone 5 as well. Ipod touch appears to have ample file storage space left. What gives? Is the i-pod touch already useless with the latest Itunes software? Operator error? Hardware problem? I don't know what to think. Have been using ipods for years without this issue.

Salut, et un accueil chaleureux aux forums!
Not certain I can help, but...
http://www.blindedbytech.com/2006/09/14/what-to-do-if-ipod-not-recognized-by-itu nes/
http://www.blindedbytech.com/2006/09/14/what-to-do-if-ipod-not-recognized-by-itu nes/
http://support.apple.com/kb/TS1401
http://support.apple.com/kb/TS1496

I have moved all my songs onto a new external hard drive but it has wiped my iPod clean. Although when I connect my iPod it's starts teh process of sync'ing - so many songs in I get a pop up advising the siong could not be read or written to?

I have moved all my itunes onto a new external hard drive to free up space. It has wiped my ipod clean! I can still see the itunes on the new hard drive so I restored my iPod and tried to sync. Although when I connect my iPod it's in the process of syncing, so many songs in I get a pop up saying could not copy to my iPod as xyz song title could not be read or written. I click ok for this pop up to dissapear and then another pop up appears saying could not coyp to iPod because of unknown error.!!! Help I'm going crazy.

Did you go into iTunes to change the location of your media files? if not you will need to go into iTunes and click on preference and select the advance tab then click the iTunes Media folder location. Select the location of your on external hard drive.

"Message ... could not be moved" Mail/Exchange problems

I know this has been discussed before, but I am not sure it applies for Snow Leopard Exchange mail. I have messages in my inbox in Mac Mail that I cannot move or delete. I get the error message above stating "An error occurred while moving messages to mailbox...". The console reports this when I make the attempt:
3/1/10 3:54:08 PM Mail[5466] * Assertion failure in -[EWSGateway resolvedIdStringForIdString:], /SourceCache/Message/Message-1077/MessageStores.subproj/EWSGateway.m:1548
Temporary ids should never be used while online. Got temp-015642e6-9ce5-4610-8ad5-963008b599ee.
0 Message 0x00007fff81608119 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 137
1 Message 0x00007fff8160807e -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 220
2 Message 0x00007fff81553b68 -[EWSGateway resolvedIdStringForIdString:] + 186
3 Message 0x00007fff8154c8cc -[EWSCopyItemsRequestOperation prepareRequest] + 394
4 Message 0x00007fff81568f93 -[EWSRequestOperation executeOperation] + 60
5 Message 0x00007fff81616347 -[MonitoredOperation main] + 229
6 Foundation 0x00007fff81d0c06d -[__NSOperationInternal start] + 681
7 Foundation 0x00007fff81d0bd23 ___startOperations_block_invoke2 + 99
8 libSystem.B.dylib 0x00007fff85bf9ce8 dispatch_call_block_andrelease + 15
9 libSystem.B.dylib 0x00007fff85bd8279 dispatch_workerthread2 + 231
10 libSystem.B.dylib 0x00007fff85bd7bb8 pthreadwqthread + 353
11 libSystem.B.dylib 0x00007fff85bd7a55 start_wqthread + 13
3/1/10 3:54:08 PM Mail[5466] * Assertion failure in -[EWSCopyItemsResponseOperation handleResponseMessage:withObject:], /SourceCache/Message/Message-1077/MessageStores.subproj/EWSResponseOperation.m: 420
Mail did something wrong: Id is malformed. on EWS response <EWSCopyItemsResponseOperation: 0x111202ff0> (EXECUTING)
0 Message 0x00007fff81608119 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 137
1 Message 0x00007fff8160807e -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 220
2 Message 0x00007fff81569eb2 -[EWSResponseOperation handleResponseMessage:withObject:] + 2295
3 Message 0x00007fff8154ce6b -[EWSCopyItemsResponseOperation executeOperation] + 363
4 Message 0x00007fff81616347 -[MonitoredOperation main] + 229
5 Foundation 0x00007fff81d0c06d -[__NSOperationInternal start] + 681
6 Foundation 0x00007fff81d0bd23 ___startOperations_block_invoke2 + 99
7 libSystem.B.dylib 0x00007fff85bf9ce8 dispatch_call_block_andrelease + 15
8 libSystem.B.dylib 0x00007fff85bd8279 dispatch_workerthread2 + 231
9 libSystem.B.dylib 0x00007fff85bd7bb8 pthreadwqthread + 353
10 libSystem.B.dylib 0x00007fff85bd7a55 start_wqthread + 13
I believe these were messages that were deleted on the Exchange server due to company SOX policies.
I have attempted to take Mail offline and delete the mail and go online after, but the messages just reappear! I am willing to start with a fresh inbox and rebuild, but I do not want to lose messages in Mail in other folders that have been cleared from the Exchange server for obvious reasons.
I tried removing Inbox.ewsmbox from my mail server folder under /Users/mlitwin/Library/Mail/<server-account-name> but that didn't do what I hoped it would. I also tried removing the Envelope Index but those messages remained in place. Is there some other way to clear them out? Do I just have to do both at the same time? Since it takes nearly a day for Mail to process all this I don't want to try this if this is the wrong approach.

In Mail.app, try using the "rebuild" item under the Mailbox pull down menu to rebuild the index.

I am moving to the USA I have a 3 pin plug on my 85 w charger

Hi,
I'm moving to the US from Pakistan (our power is 220 volts like Europe). My charger has a 3 pin plug . Will the 3 pin work in America or do I need to get a converter plug? I also have a small two-pin plug lying around but I can't remember if this came with my new macbook pro or my previous macbook. It's just a plug- doesn't have a wire or anything - it does fit directly onto the magsafe power adapter but I don't want to use it if there might be a voltage issue when I get to the US. Is there any way I can try it out there safely?
my MagSafe specs: frequency 50-60 Hz, single phase
line voltage 100-240
output voltage
16.5 V DC, 3.65 A

The power adapter places one-half of the line voltage on the computer chassis/case. In Pakistan, and much of the world, the AC input line voltage is over 200VAC, and the voltage sensation can be annoying. In the US, the AC input line voltage is 120VAC, and only 60VAC is placed on the case. Very few people can sense that voltage level and, even without a grounded 3-prong AC plug, you probably won't feel anything.

Moving to Chile in a week, need to know if my 27'' iMac will work on 220V automatically

Hi guys!
I'm graduating today from college! and I'm moving to Chile in just a week and a half to work. I have a 27'' iMac that I bought last year but I don't know if it will work there because of the voltage difference. Does anyone know for sure how this works? Of course when I've gone down there my Macbook hasn't had any problems because the charger converts the power, but I don't know if the iMac has the same capability or if I'll have to buy a converter in Chile.
Please let me know!

The iMac will work on the electricity supplied to the wall. You just may need a different shaped prong to plug into the wall. Check the specs at Apple's web site.

Moving average price in case of goods receipt with free of charge

Hello everyone,
Need some inputs......
Sometimes we receive materials from suppliers free of charge (e.g. warranty replacement) u2013 moving average goes down u2013 worst case 0,01 EUR/piece. This causes problems in government reporting and export documentation EX1 and clearance/pro-forma invoice) for deliveries to field engineers (Order type ZIS1, ZIS3 u2013 item cat. ZICA), because moving average price is used for the values in government reporting and on the invoices. In government reporting and on invoices we need to state a true value of the part.On the other hand, the value warehouse stock is depending on the moving average cost as well.Could you please let me know, how to handle such receipts from the supplier to have a correct stock value and correct values on invoices and government reporting?
Thanks
Deepthi...

Hello Deepthi,
It depends on your company policy. If you want to valuate the material along with the material purchased handled in moving average price, free consignment will bring down the MAP for the material.
In that case, you can revaluate the material to the original price in MR21 transaction.
If you are not going to handle the materials received free of charge along with the purchased material, you can go with another material code, with non valuated material type.
But i guess, no company will be asking for another material code. So go for revaluation after the receipt of free consignment.
Regards

Failed boot after moving hard drive (IDE not SATA)

Greetings all.
I am attempting to setup a headless box, and in doing so I am installing Arch on one system (Sapphire Axion A3-M275 Motherboard), then moving the hard drive to the new system (SGS1660, a VIA CLE266/VT8235 based headless rack-solution). After moving the drive into the SGS1660, the system fails to boot. Attached output from the Serial Console:
Booting 'Arch Linux'
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /vmlinuz26 root=/dev/disk/by-uuid/93df0562-c6e6-4583-9a79-51cd2091247b r
o console=ttyS0,115200
[Linux-bzImage, setup=0x3600, size=0x1ad6d0]
initrd /kernel26.img
[Linux-initrd @ 0x2ff21000, 0x9e7a5 bytes]
Linux version 2.6.30-ARCH (root@T-POWA-LX) (gcc version 4.4.0 20090630 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jul 20 11:20:32 UTC 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002ffd0000 (usable)
BIOS-e820: 000000002ffd0000 - 000000002ffde000 (ACPI data)
BIOS-e820: 000000002ffde000 - 0000000030000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
DMI 2.3 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
last_pfn = 0x2ffd0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009fc00 (usable)
modified: 000000000009fc00 - 00000000000a0000 (reserved)
modified: 00000000000e0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000002ffd0000 (usable)
modified: 000000002ffd0000 - 000000002ffde000 (ACPI data)
modified: 000000002ffde000 - 0000000030000000 (ACPI NVS)
modified: 00000000fec00000 - 00000000fec01000 (reserved)
modified: 00000000ff780000 - 0000000100000000 (reserved)
init_memory_mapping: 0000000000000000-000000002ffd0000
RAMDISK: 2ff21000 - 2ffbf7a5
ACPI: RSDP 000f6ad0 00014 (v00 ACPIAM)
ACPI: RSDT 2ffd0000 0002C (v01 A M I OEMRSDT 09000521 MSFT 00000097)
ACPI: FACP 2ffd0200 00084 (v02 A M I OEMFACP 09000521 MSFT 00000097)
ACPI: DSDT 2ffd0390 03270 (v01 MiniV MiniV080 00000080 INTL 02002026)
ACPI: FACS 2ffde000 00040
ACPI: OEMB 2ffde040 00046 (v01 A M I AMI_OEM 09000521 MSFT 00000097)
0MB HIGHMEM available.
767MB LOWMEM available.
mapped low ram: 0 - 2ffd0000
low ram: 0 - 2ffd0000
node 0 low ram: 00000000 - 2ffd0000
node 0 bootmap 00011000 - 00016ffc
(9 early reservations) ==> bootmem [0000000000 - 002ffd0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 0000626e44] TEXT DATA BSS ==> [0000100000 - 0000626e44]
#4 [002ff21000 - 002ffbf7a5] RAMDISK ==> [002ff21000 - 002ffbf7a5]
#5 [0000099c00 - 0000100000] BIOS reserved ==> [0000099c00 - 0000100000]
#6 [0000627000 - 0000629230] BRK ==> [0000627000 - 0000629230]
#7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
#8 [0000011000 - 0000017000] BOOTMAP ==> [0000011000 - 0000017000]
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x0002ffd0
HighMem 0x0002ffd0 -> 0x0002ffd0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0002ffd0
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
SMP: Allowing 1 CPUs, 0 hotplug CPUs
No local APIC present or hardware disabled
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 11 pages at c1606000, static data 24444 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194911
Kernel command line: root=/dev/disk/by-uuid/93df0562-c6e6-4583-9a79-51cd2091247b ro console=ttyS0,115200
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
NR_IRQS:512
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 1326.894 MHz processor.
Console: colour dummy device 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing HighMem for node 0 (00000000:00000000)
Memory: 772708k/786240k available (2905k kernel code, 12976k reserved, 1052k data, 392k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf07d0000 - 0xff7fe000 ( 240 MB)
lowmem : 0xc0000000 - 0xeffd0000 ( 767 MB)
.init : 0xc04e3000 - 0xc0545000 ( 392 kB)
.data : 0xc03d647f - 0xc04dd6a8 (1052 kB)
.text : 0xc0100000 - 0xc03d647f (2905 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 2654.36 BogoMIPS (lpj=4422980)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
CPU: L2 Cache: 64K (32 bytes/line)
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 10k freed
ACPI: Core revision 20090320
ACPI: setting ELCR to 0200 (from 8c20)
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (2654.36 BogoMIPS).
net_namespace: 1056 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: PME# disabled
pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.1: PME# disabled
pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.2: PME# disabled
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:11.0: quirk: region 0800-087f claimed by vt8235 PM
pci 0000:00:11.0: quirk: region 0400-040f claimed by vt8235 SMB
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:05: ioport range 0xe900-0xe90f has been reserved
system 00:05: ioport range 0xea00-0xea0f has been reserved
system 00:05: ioport range 0xeb00-0xeb2f has been reserved
system 00:05: ioport range 0xec00-0xec7f has been reserved
system 00:05: ioport range 0xe800-0xe83f has been reserved
system 00:07: ioport range 0x3e0-0x3e7 has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0x800-0x87f has been reserved
system 00:07: ioport range 0x400-0x41f could not be reserved
system 00:09: iomem range 0x0-0x9ffff could not be reserved
system 00:09: iomem range 0xe0000-0xfffff could not be reserved
system 00:09: iomem range 0x100000-0x2fffffff could not be reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: disabled
pci 0000:00:01.0: MEM window: 0xddd00000-0xdfdfffff
pci 0000:00:01.0: PREFETCH window: 0x000000d5c00000-0x000000ddbfffff
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs...
Freeing initrd memory: 633k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1248948860.509:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1510
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:01.0: disabling DAC on VIA PCI bridge
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 392k freed
:: Loading Initramfs
:: Running Hook [udev]
:: Loading udev...SCSI subsystem initialized
pata_acpi 0000:00:11.1: can't derive routing for PCI INT A
pata_acpi 0000:00:11.1: can't derive routing for PCI INT A
done.
Waiting 10 seconds for device /dev/disk/by-uuid/93df0562-c6e6-4583-9a79-51cd2091247b ...
Root device '/dev/disk/by-uuid/93df0562-c6e6-4583-9a79-51cd2091247b' doesn't exist, attempting to create it
ERROR: Failed to parse block device ids for '/dev/disk/by-uuid/93df0562-c6e6-4583-9a79-51cd2091247b'
ERROR: Unable to detect or create root device '/dev/disk/by-uuid/93df0562-c6e6-4583-9a79-51cd2091247b'
You are being dropped to a recovery shell
Type 'reboot' to reboot
Type 'exit' to try and continue booting
NOTE: klibc contains no 'ls' binary, use 'echo *' instead
If the device '/dev/disk/by-uuid/93df0562-c6e6-4583-9a79-51cd2091247b' gets created while you are here,
try adding 'rootdelay=10' or higher to the kernel command-line
ramfs$
I think what is happening is that the kernel does not have the drivers for the IDE controller on the board for the CLE266/VT8235. Does this seem accurrate? And if so, how can I verify the current kernel config, then compile a kernel with everything else Arch needs to boot properly? I am familiar with the old means of setting up a kernel using the 'make menuconfig; make; make modules_install' etc method.
Thanks for the help in advance!

Hi, not sure if this is still causing you an issue, but I just ran into the same problem.
For me, I have a Sharp PC=MM1110 which has no cd drive and doesn't like to boot from USB. To get Arch installed on it, I had to attach it to another PC (via it's docking cradle, which lets it show up as a USB hard drive), then boot the other PC from an Arch install cd and select the USB hdd for all of the partitioning etc.
When I rebooted after the installation, the Sharp wouldn't boot.
First, I had to edit the grub menu entry to point to (hd0,0), at which point I got the error listed in the first post... Failed to parse block device id's.
If i booted into fallback mode, it booted without a problem.
For me, the solution to finally get it working was to boot into fallback mode, remount the filesystem as r/w, and run mkinitcpio -g filename to rebuild the kernel. Once completed all I had to do was point grub to the new kernel image and it booted ok.
Hope this is useful to someone

Moving to...

Similar Messages

Maybe you are looking for