Mozilla.cfg not being applied in Firefox 4

I am trying to get certain settings configured and locked using mozilla.cfg. We have used this exact method in Firefox 3.x but for some reason it is ignoring mozilla.cfg.
Here is my mozilla.cfg
<pre><nowiki>//
try {
lockPref("app.update.enabled", false);
lockPref("app.update.autoUpdateEnabled", false);
lockPref("extensions.update.enabled", true);
lockPref("extensions.update.autoUpdateEnabled", true);
lockPref("network.automatic-ntlm-auth.trusted-uris", "shpt1-ed1, sharepoint");
lockPref("network.cookie.alwaysAcceptSessionCookies", true);
lockPref("network.cookie.cookieBehavior", 1);
} catch(e) {
displayError("lockedPref", e);
}</nowiki></pre>
and the appropriate all.js lines
pref("general.config.obscure_value", 0); // for MCD .cfg files
pref("general.config.filename", "mozilla.cfg");

You can place a js file (local-settings.js) in the defaults\pref folder in the Firefox program folder. Firefox 4 no longer uses all.js , but packs all files in a special compressed (optimized) omni.jar archive and it is best not to tamper with that file.
See http://kb.mozillazine.org/Locking_preferences

Similar Messages

  • The "Roman" font is not being recognized in Firefox 4.0. As such, I cannot read any previously posted topics or post any new topics on websites using this font.

    The "Roman" font is not being recognized in Firefox 4.0. As such, I cannot read any previously posted topics or post any new topics on websites using this font.

    I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
    When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
    At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
    I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

  • Null offset from calibration not being applied to output

    I am measuring some load cells using a I 9237.  I am setting the null offset using Device > Bridge Calibration in the DAQ Assistant.  I measure the offet and hit calibrate.  It says "Calibration successful" and I hit finish, but the offset value is not applied to the data.
    How do I get this to work?

    Hello IamRubber,
    How can you see the calibration not being applied?  Are you running the same DAQ Assistant to see the offset?  If possible, please attach a screenshot from before/after running bridge calibration.
    Patrick W.
    Applications Engineer
    National Instruments

  • Policy not being applied to users

    I have a group policy that used to work, but now has decided it does not want to be applied to the workstations anymore. I don't know what may have happened to make is stop working.
    It's a pretty restrictive policy for students. I have the exact same policy for two other groups of students that still work. All three policies were copied from the same set of files. In other words, I make a change to one, then copy the files to the other two because they reside on different servers. Yes, I do open each one in C1 to update the timestamp.
    When I run wmsched, the policy is there in the list, but the settings are not applied. I can log in to the PC with one of the other student accounts and their policy is applied.
    The login I'm using to test with has R rights to the policy location - the same rights that the other users have to their policies. I have also tried more rights with no different results.
    The DLU part of the policy runs, and I have turned off the windows firewall. I have also created a brand new policy from scratch to rule out any corruption in the old policy and I get the same results.
    Apparantly, my workstation policy for this group is not being applied either. The other two groups' policies apply like they are supposed to. So this means that neither policy assigned to this group of students/workstations is working.
    Any ideas?
    Thanks

    FishEggStew,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • Data are not being applied at destination side

    Hi all,
    I have implemented real time streams replication(not archive log based downstream replication).
    source:9.2.0.8.0
    destination:10.2.0.2.0
    Capture and propagation is working fine. DBlinks are also fine. Apply process is running , but data are not being applied in destination side.
    The trc file shows this:
    Dump file /dev1/visdb10/10.2.0/admin/VIS_wbsebdev1/bdump/vis_p001_14628.trc
    Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
    With the Partitioning, OLAP and Data Mining options
    ORACLE_HOME = /dev1/visdb10/10.2.0
    System name: Linux
    Node name: wbsebdev1
    Release: 2.4.21-32.ELsmp
    Version: #1 SMP Fri Apr 15 21:17:59 EDT 2005
    Machine: i686
    Instance name: VIS
    Redo thread mounted by this instance: 1
    Oracle process number: 21
    Unix process pid: 14628, image: oracle@wbsebdev1 (P001)
    *** SERVICE NAME:(SYS$USERS) 2008-05-29 11:39:26.957
    *** SESSION ID:(388.16) 2008-05-29 11:39:26.957
    The Alertlog file shows at the end this:
    Thu May 29 11:19:06 2008
    Streams APPLY A001 with pid=16, OS id=9531 stopped
    Thu May 29 11:21:25 2008
    Incremental checkpoint up to RBA [0x746.d359.0], current log tail at RBA [0x746.d471.0]
    Thu May 29 11:39:26 2008
    Streams APPLY A001 started with pid=18, OS id=14624
    Streams Apply Reader started P000 with pid=20 OS id=14626
    Streams Apply Server started P001 with pid=21 OS id=14628
    Thu May 29 11:41:33 2008
    Incremental checkpoint up to RBA [0x746.11565.0], current log tail at RBA [0x746.121b9.0]
    Pls help.
    Thanking You,
    Nitesh.

    Problem solved.

  • Rules in Mail not being applied after Mavericks update

    Hi everyone, I know there are a lot of threads already discussing similar issues, but so far I've been unable to find one that helps resolve my particular issue. Ever since upgrading to Mavericks my rules are not being applied in Mail. I will give you a screenshot of one of my rules:
    I have about five rules that follow the same pattern: search for particular string in the FROM field and mark it with a color if the string is present. These rules all worked fine in Snow Leopard. All of my rules are still present after the upgrade and all checked as active. When I "select all" messages in my inbox and press Option-Cmd-L the rules are applied properly. However, the rules are not applying themselves when new mail comes in. As far as I can tell this does not have anything to do with the mail not being recognizes “as a new message” like, for example, because the mail was already read on my phone. It happens even if my other devices are offline and the only thing I am using to check mail is my laptop.
    I am using a MacBook Pro 2.3 GHz Intel Core Duo with OS X 10.9.1, in case that matters.
    Thanks for any advice!

    I think I've found at least a partial solution to the Mail - Rules Don't Work problem:
    In "Mail" go to the menu Mailbox and click on Rebuild.
    If you have a lot of stuff, this will take several minutes to finish.
    I also reviewed all my rules and made a few minor changes.
    Mixed results:  I found that running "Apply Rules" didn't work on email already received; but new mail did.  I don't quite understand that, but I call it a partial success.

  • [svn:osmf:] 14871: Fixing anchoring 'right' and 'bottom' properties not being applied on items that don't have a width/ height and position set.

    Revision: 14871
    Revision: 14871
    Author:   [email protected]
    Date:     2010-03-19 01:05:54 -0700 (Fri, 19 Mar 2010)
    Log Message:
    Fixing anchoring 'right' and 'bottom' properties not being applied on items that don't have a width/height and position set.
    Modified Paths:
        osmf/trunk/framework/OSMF/org/osmf/layout/LayoutRenderer.as

    If you're just doing it in a back and forth or spiral fashion, you don't need to check whether a square's been filled in. You just go from a start point to an end point. Those points and the squares in between are determined by simple arithmetic.
    If you're doing it randomly, I wouldn't use the GUI elements themselves. I'd have, for example, and array of booleans that tells whether each square has been filled in.

  • Security constraints not being applied after using custom login module

    I am using form based authentication and I applied the custom login module - DBProcLoginModule to work with the embedded OC4J (JDeveloper 10.1.3.2). I have specified two security contraints in web.xml. The authentication is working correctly, however the security contraints are not being applied. All users are able to access all url resources. The security constraints were working properly before applying the custom login module. Pls help.
    Leena

    Hi,
    if "All users are able to access all url resources" then this indicates that the RL isn't properly protected. If the authorization would fail then noone would have access and you would see error code 401
    Make sure the role names in web.xml are the same as added by the LoginModule. Also make sure you set the dynamic.role property and the custom security provider property in the orion-application.xml
    <jazn provider="XML">
         <property name="custom.loginmodule.provider" value="true"/>
         <property name="role.mapping.dynamic" value="true"/>
    </jazn>
    Note that the above is not required (because done automatically) if the custom LoginModule configuration is deployed through the orion-application.xml file
    Frank

  • LOV not being applied to a column

    Problem: The first query runs quite fast as it is soft parsed, but the LOV values are not applied to the resulting values in the column CHECK_MARK. The second query is hard parsed (and slow due to that) but has its LOV value properly realized. The LOV being applied changes 0/NULL to white space and the 1 is a graphical checkmark.
    For this situation an LOV is being applied to a column named "CHECK_MARK'. The column will have a value of 0/NULL or 1 if the row (employee) is in the source table (SCHEMA.EMPLOYEE_V) has its primary id (EMP_ID) in a collection named 'SELECTED_EMP_IDS'. The only values inside the collection is C001 storing the EMP_ID value of every employee selected.
    --Works fast, but the report renders with 0/NULL and 1's instead of nothing for 0/NULL and an IMG tag for a value of 1.
    SELECT
    EMP_ID,
    NVL((SELECT 1 FROM HTMLDB_COLLECTIONS WHERE C001 = EMPLOYEE_ID AND COLLECTION_NAME = ''SELECTED_EMP_IDS''),0) AS CHECK_MARK FROM SCHEMA.EMPLOYEE_V;
    --Slow, but the img tag is properly output from the LOV.
    SELECT
    EMP_ID
    0 CHECK_MARK FROM SHEMA.EMPLOYEE_V
    LEFT JOIN (SELECT 1 CHECK_MARK FROM DUAL) ON (EMP_ID) IN (SELECT C001 FROM HTMLDB_COLLECTIONS WHERE COLLECTION_NAME = 'SELECTED_EMP_IDS';
    Any reason for this or is there another way to format the query so it is both soft parsed and have the LOV properly output?

    There is a collection, with C001 having some number of EMP_ID’s in it.
    COLLECTION_NAME = ‘SELECTED_EMP_IDS’
    C001
    27
    32
    52
    70Both of the following queries will return the same data:
    (Query 1)
    SELECT
    EMP_ID,
    NVL((SELECT 1 FROM HTMLDB_COLLECTIONS WHERE C001 = EMPLOYEE_ID AND COLLECTION_NAME = ''SELECTED_EMP_IDS''),0) AS CHECK_MARK FROM SCHEMA.EMPLOYEE_V;
    (Query 2)
    SELECT
    EMP_ID
    0 CHECK_MARK FROM SHEMA.EMPLOYEE_V
    LEFT JOIN (SELECT 1 CHECK_MARK FROM DUAL) ON (EMP_ID) IN (SELECT C001 FROM HTMLDB_COLLECTIONS WHERE COLLECTION_NAME = 'SELECTED_EMP_IDS';
    EMP_ID         |       CHECK_MARK         |     ...
      10               0
      15               0
      27               1
      32               1
      52               1
      70               1
    110               0Where all the 1's in the checkmark column are also contained within the collection above. This query is used to render a report. The CHECK_MARK column in the report has a static LOV applied to it.
    CHECK_MARK_LOV:
         Return Value     Display Value
         0                
         1          &lt;img src="/i/check_small_black.gif"&gt;When the page is run using Query 1, the CHECK_MARK column will display 0's and 1's. When running the page with the report having the source of Query 2, the LOV will be properly applied and the 0's will become white space and 1's will become &lt;img src="/i/check_small_black.gif"&gt;..
    I am just trying to figure out why Query 1 makes it so the CHECK_MARK column is rendered with the return value of the LOV while Query 2 renders the CHECK_MARK column with the proper LOV display value.

  • DHCP Option Tags are not being applied...

    Hi,
    About to loose my mind... basically we are working towards a small WYSE Thin Client deployment in our environment.  The WYSE clients require to receive certain DHCP Option Tags to find the WCM server of which they receive their configuration from.  Same
    applies to the WDM Server as well.  The problem is no matter what we do, our test client is not receiving the custom option tags we've defined in our DHCP server.  
    DHCP Servers:
    vlan41
    10.40.1.206
    10.40.1.207
    Test Client:
    vlan46 - ip helpers defined on the switch
    Set to receive the same ip address from the DHCP server through the reservation route.
    Option Tags:
    186 - WDM Server - 10.40.1.184
    195 - WCM Server - 10.40.1.185
    196 - WCM Path - / 
    I've installed Wire Shark on the test client to monitor the DHCP activity.  The above custom options tags are not being pushed on to the client.  
    The Router, DNS Server and Domain Tags are being pushed.  So it's working but also not working????!!!
    Anybody with some insight to this problem?

    Hi hpaul_p
    In all fairness I'm about to give up... the vendor is not coming up with a solution and constantly blaming Microsoft.  To further test and confirm this wasn't a network issue, I've setup a secondary test environment using a 4 port switch, a client and
    a DHCP server.  Same results!!!  I'm really running out of time, so my work around is this:  I've setup a SRV records pointing to the WCM server... in your case this would be SRV record for the WDM server.  I've disabled the auto
    discovery functionality of the WDM Agent, for some reason it seems to be clashing with the WCM agent.  Since you will be using WDM only, don't disable auto discovery, tick the DNS SRV record from the Discovery Settings under the client agent. 
    I'm going to add the clients to the WDM server manually through their ip addresses so don't need auto discovery. From what I gather from the manuals the WCM searches for the repository or conifg servers in this order:  1. SRV 2.DNS (A record)
    3.DHCP (Options), I bet it's the same with WDM.  Though SRV and DNS methods has their limitations, if you will be using the default paths and credentials it shouldn't be a problem.  This is all I have have.  Steven Song I've forwarded you the
    DHCP database, if you find any problems with it please let me know.

  • Image Colour Profiles are not being applied

    When I import images in to InDesign CC 2014 the embedded colour profiles are not being activated.
    Therefore images are looking flat and a bit washed out on screen.
    In order to apply the colour profile I have to right click on the image go down to Graphics and the colour settings and select the correct profile.
    In the InDesign colour settings menu I have Colour management policies set to Preserve Embedded Profiles on RGB and Preserve Numbers (ignore linked Profiles) for CMYK. However changing these to other options makes no difference, the profile still need to be activated on each image.
    I am working with RGB images that have the Adobe RGB 1998 profile embedded in them.
    I cannot figure out why this is happening!??

    Check your color settings.

  • Parameter is not being applied

    Hey all
    i have the parameter in one of my reports, but when i change the value of the parameter the output or the result is not being changed.
    no matter what i do it will keep on showing me the same data
    any suggestions ?

    Take a look at the query and look if the parameter is being used.
    To get a better understanding of how things work, take a look at the data modelling guide here: For 11g
    Oracle&amp;reg; Fusion Middleware Data Modeling Guide for Oracle Business Intelligence Publisher 11g Release 1 (11.1.1) …
    for 10g: http://docs.oracle.com/cd/E12844_01/doc/bip.1013/e12187.pdf
    Thanks,
    Bipuser

  • Managed proxy settings not being applied

    I am currently having an issue with a certain managed preferences set in Workgroup manager.
    Essentially, all machine preferences are applied by the clients (energy saver and such), except for network proxy settings and bypass domains.
    Preferences are set on machine groups which my clients are members of, but the same happens if I set the same managed preferences on user accounts, also.
    In each test I have done, an 'mcxquery' shows that the client has received the preferences, along with all the other settings I've applied and each time all of the preferences have applied except for the network proxy! Both the clients and the server have been re-installed from scratch, but the problem still persists.
    Has anyone ever encountered anything similar? Does anyone have any suggestions on how I might get this working again?

    Hi all,
    I'm having exactly the same issue : most of the managed preferences being applied except proxy
    I've checked with mcxquery : proxy settings are broadcasted, and I find the correct settings in the file /Library/Managed Preferences for the user, but when I check in Preferences/Network/Proxy, nothing appears ...
    Any idea ?
    Thanks,
    PhC.

  • Unable to open email inbox or files. screen changed suddenly last night. got some message about patch not being applied. i have the patience of a gnat and have no clue how to fix this issue. HELP! in English

    I'm running Mozilla-firefox on a Lenovo laptop. Last night the screen changed suddenly. brief alert about patch. unable to open email inbox to read/send emails. logged off thinking all would be right by morning. today, can access internet, google, etc, but unable to open email inbox. plus the listing of the various yahoo accts has changed the sequence order. please help. i depend on my email for my livelihood. i can read emails on my blackberry so the issue is not my internet provider.

    In the patch 29, it is
    function encode_attachment(str) {
    var c, i, s = ''
    for (i = 0; i < str.length; i++) {
    switch (c = str.charAt(i)) {
    case ' ':
    case '#':
    case '?':
    case '%':
    s += NN ? '_' : escape(c); break
    default:
    s += c
    return s
    NO issues seen, Able to open attachment which has space in the file name.

  • Urgent : Images and stylesheets not being applied in anonymous page.

    Hi
    The anonymoys page of our portal application is not showing the images, and also the styles are not applying.Everytime I open the anonymous page, its poppoing up a dialog box for authentication,and on cancelling it, showing the page without images,but the other text data which we are fetching form the XML files in the same KM document is being shown.
    We have set all the permissions, to the KM document, assigned the anonymous role, end user role and gave full control to all the roles related.
    We assigned 'anonymous' for authentication scheme of all the objects.
    The images are displalyed on clicking 'show image'  on the page.
    We have tried all the means we know.Please help us in fixing the problem.
    Help will be appreciated.
    Thanks & Regards
    Swetha

    1 check ur "Authentication Scheme" has changed to o "anonymous"
    which is in ur iview/page's properties/Advanced.
    2 check ur role has assigned to anonymous group.
    3 check URL  http://<portalserver>:<port>/irl/portal/anonymous
    hope it can help u

Maybe you are looking for

  • Error in Email Webservice

    Hi,   I  created the example  webdynpro app for consuming Webservices.[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/301ff0bb-74ca-2910-fa99-eae392695aad].   I have copied the WSDL file and saved it locally. When I deploy and ru

  • Will someone please make clear what the Star Wars display is

    I see so many references to the so called Star Wars, but never any screenshot or illustrations. TM manuals say, " If you don't find the "Star Wars" display intuitive, PLEASE tell apple" . Great, now how about showing me what I should be seeing. What

  • Error Message display in Table Maint. View without Closing

    I have logic in a table event that enforces some parameters on entries in a table maintenance view.  For example, two fields cannot be equal.  I have the logic for this working, however I am not sure the best approach to display a message to the user

  • HT1212 my ipad is disabled how to unlock it?

    my ipad is disabled how to unlock it?

  • TFS Data Bases to New Server

    Hi , we are having TFS 2013 version ..we need to migrate only TFS database server to new server. Please let me know the steps for doing this ..need to restore databases from existing server to new server and Need to point TFS application to Point to