MP navigator ex the scanner driver for this device is not supported for my itunes/ ipod

Mp navigator ex driver for this device not supported when I plug in my ipod I have windows vista

Hello there K_McCreedy,
I saw your post about the scanning issues you have been having with your PS B110a and Mavericks. I have looked into this for you and I would like to offer some suggestions.
First of all, there is no downloadable full feature driver and software (scanning software included) for this model of printer and Mavericks. There are some work around options however, that I will link you to below!
Please follow these steps:
1. Mac OS X: How to reset the printing system
2. Repair disk permissions
3. OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
(See under link #3 for the different methods of scanning options with Mavericks under the FAQ's section)
I hope I helped answer your question!
Thanks for posting in the community and have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

  • The aspect ratio of this file is  not support by DVD. Possible slideshow error?

    hello everyone,
    I will try to give as much information as possible.  Dont scream at me if i forget anything.  For starters, I just learned how to use Adobe Encore CS4.  I taught my self between reading the  help files and videos I found on the web.   I am an amateur when it comes to DVD authoring (could have alot to do with my problem).  Im an animator and I am making a DVD to show my demo reel, drawings, and i have a storyboard to final comparison video.  I designed all of my menus in photoshop.  I have one transition that was animated in after effects that was imported using dynamic link.  My demo reel is a mov file at 640x360 widescreen, half the size of HD 720p.  The comparison video is a premiere file from dynamic link (same size as the demo reel). There is some background music for the menus. Then I have 3 slideshows, and i believe this is where the error is coming from.  Most of the artwork has the same dimensions but there are some that are larger or smaller.  Some are jpg, but most are PSD files.  The slide show is set to manual advance with music in the background. I have no transition effects on the slideshow.  When building the DVD, i believe when it says "starting project" after all the importing was done,i get the error
    The aspect ratio of this file is  not support by DVD. PGC info: name= Figure Drawing (name of the slideshow and a menu button) ref=Fpgc, time=234.2340s
    I just tried to build the DVD without the slideshow and I still get the error. Possibly a menu issue? I have no idea. Ive ran into errors before but I was able to get through the others.  I just cant seem to find a solution to this error. Even after searching the forums for similar problems. Hopefully, the solution is simple. If more info is needed let me know.  I really need this DVD to send out for jobs!! Thanks everyone.
    Brandon

    When doing SlideShows, whether in Encore (somewhat limited), or in PrPro, it is always better to re-size outside of these programs, prior to Import. I use Photoshop (PS) to do this, and use an Action to get everything in the proper Mode, Color Space, Size - everything. I always do a Save_As and use .PSD files. I also Save a working version, incase I have Flattened, etc., for Import into the NLE/authoring app.
    JPEG's *should* work fine too, though there is the JPEG compression to deal with. Might not be an issue, but for max quality, I start with RAW images, process to .PSD's, and then work from copies of these, to get my still Assets ready for PrPro, or En.
    I either size exactly to my Project Preset, or to exactly what I need, if say I will pan across a zoomed out image. In a major Project, I may have sub-folders with 4 different sizes of image - based precisely on what I will need to do with that/those image(s). If I will not need to do any animation on any images, then I use that Project Preset (including the correct PAR) and they work perfectly. This also eliminates any unnecessary overhead on the system.
    Good luck,
    Hunt

  • I am trying to download pictures from my canon rebel  eos to my Ipad but i get the message "this device is not supported" what can I do ?

    I just bought an Apple Lighting to USB Camera Adapter. When I got home to and connected it to my Canon Rebel EOS Digital Camera. I received the error message "This device is not supported" I was wondering if there is any software or drivers I need to download?
    Thanks
    Don

    I use Canon Cameras and have no problems downloading photos from the camera to the Lightning to USB Camera Adapter. My questions and suggestions might be basic but just to make sure:
    1. This is an iPad forum area. Are you using the lightning to USB camera adapter with an iPad? Your info in your original post says iPod. I'm not sure that the adapter works with an iPod.
    2. After you connect the adapter to your iPad and then use a USB cable to connect the adapter to the camera did you turn on the camera?
    3. If you did turn on the camera and still did not get the import of photos to start try a reset your iPad. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. This will not cause any data loss.

  • When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

    When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

    You can try downloading the 64 bit version.  You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

  • My iPhone 4s was playing music now won't on my sony dream machine how do I fix. "This device is not supported by this I-phone".  I have turned  off phone unplugged sony and did the pin reset on bottom.     Help please I need my tunes

    My iPhone 4s was playing music now won't on my sony dream machine how do I fix. "This device is not supported by this I-phone".  I have turned  off phone unplugged sony and did the pin reset on bottom.     Help please I need my tunes

    Try plugging it up to your computer and launching iTunes and either resetting it to factory settings or resetting to last sync. Hopefully it just noticing it's plugged up to iTunes will fix it. This happened to my friend once and all she had to do was plug it into her computer and that fixed it.

  • Nokia E50: "This device is not supported by iSync"

    Just purchased Nokia E50 (series 60 smartphone) but I'm unable to add it to my iSync devices. I keep on receiving this message, "This device is not supported by iSync."
    I purchased it because it was listed as a compatible device on http://www.apple.com/macosx/features/isync/devices.html
    I'm using iSync Version 2.3
    Very keen on getting it to work/sync.
    Please help.

    You might be better off getting a new cell phone. From what I can gather, the W490 is quite old. If your cell phone plan's expiration date has passed, it should be easy to convince your cell phone carrier to replace your cell phone with a compatible version for little or no money simply by telling them that you will switch to another cell service provider if they can't give you a good deal on a new cell phone, but of course, make sure it is compatible with iSync on Snow Leopard. Here is a pointer to Apple's iSync device compatibility guide: http://support.apple.com/kb/HT2824

  • My new ipod nano 7th generation will not sync with i tunes, followed all the apple on line trouble shooting ideas, this device will not show up in itunes but i can see it from explorer, windows 7 user.

    ipod nano 7th generation will not sysc with i tunes is updated , device does not show up in itunes under devices but shows itself in explorer.ran diagnostics failed sync. about ready to take this back to best buy.

    yes i have a solution to my problem only because of a recent phone call from apple they were great.......... in the right hand side of itunes my i pod was displayed.  click on the ipod symbol........at the top of the page you will see summary,,,,,,music,,,,,,movies,,,,,,tvshow,,,,,,photo,,,,,on this ipod.
    click on music check mark music done and sync
    problem solved
    thanks apple

  • When connecting an HDMI adapter I get the message This device is not supported by this ipad

    WWhen I connect the adapter vis an HDMI cable to my TV, I see the image of my IPad then I get the error message about not supported and the TV displays No Signal. I have a multifunction adapter that works although the connection on it is fiddly. I Use an IPad 2 with the latest version of IOS .

    Howdy Gdad_Edw,
    Welcome to Apple Support Communities.
    Take a look at the article linked below, it provides information and troubleshooting tips that can help you resolve the no video issue with your Apple Digital AV Adapter and your iPad.
    About Apple Digital AV Adapters for iPhone, iPad, and iPod touch - Apple Support
    Troubleshooting
    If you encounter an issue using the Apple Digital AV Adapter or VGA Adapter:
    Disconnect and reconnect the adapter from the iOS device and display.
    Connect directly to the TV, projector, or external display using a known-good VGA or HDMI cable.
    Remove any VGA or HDMI extension cables or converters.
    Note that accessories that convert a VGA or HDMI signal to other video formats (DVI, Composite, Component) are not supported.
    Ensure that you are using the latest version of iOS. Some Apple Digital AV Adapters require iOS 5.1 or later.
    Ciao,
    -Jason

  • "The aspect ratio of this file is not supported by DVD" Error

    Hi everyone,
    I've gone to build my project, transcoded ALL of the video files used in it, and when Encore goes to create my first timeline the above error pops up.
    Just for reference and to save people asking questions, I did check my project before I went to build it, and I'm using PAL 16:9 footage for all of my project. Please Help! I desperately need to have this finished!
    Desperately,
    Brett.

    Could it be that you used a 4x3 menu template, instead of 16x9? Are you sure that all your assets are 16x9?

  • How do I donwnload the scanner drivers for my HP Officejet 4500 printer

    How do I download a patch for Windows 8.1. so that I can download the scanner driver for my HP Officejet 4500, I have tried all the links that have been given and nothing works.

    Hello, 
    Please download and run the HP Printer Install Wizard from www.hp.com/go/tools
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • This device is not eligible for the requested build

    I am getting an error message when trying to update my iphone to the latest software version.  The error message says "This device is not eligible for the requested build"

    Can you get a Wi-Fi connection on your iPhone?
    I got an Internet connection on my phone, went to SETTINGS --> GENERAL --> SOFTWARE UPDATE and updated my Software wirelessly (no iTunes involved).
    When I connected my phone to my Computer again and iTunes popped up, it showed that my iPhone software was up to date. Then I could restore to an old back-up.

  • Why- I try to connect my Samsung PL 55 camera to my iPad 1 using the camera kit it tells me this accessory is not supported by iPad.   I have tried restarting etc but nothing works

    I got the camera kit and plug in my Samsung pl55 camera.  The iPad eventually says this accessory is not supported by iPad.    a matte camera asks me if ! want to connect the USB to a computer or a printer.   I select computer but by then it's too late and everything just sits and nothing happens. 

    Are you using Apple's iPad Camera Connection Kit?
    Have you plugged your Samsung PL55 into the kit as shown here:
    Are you trying to send JPEG images from the camera to the iPad?
    Your post has a portion that starts with " a matte".  I don't understand it.  Perhaps the beginning of the sentence got omitted.

  • "This form is not supported" with updated version on iMac.

    I can view PDFs in Safari, but when I click save and open the document on my computer, the document states "Warning: This form is not supported with the current version of Acrobat or Adobe Reader. Upgrade to the latest version for full support." I am upgraded to the latest version! What is going on here?
    I also tried to save it to Adobe's cloud, and when I went to view the document in my Adobe account, it says the same thing. Can somebody help me fix this? I'm trying to fill out a very important document.
    I am using OS X Version 10.9.3, Safari Version 7.0.4, and Adobe Reader Version XI (11.0.07)

    That means you were probably using Adobe Acrobat to view PDF's. Acrobat is totally unnessary, you can view PDF's in Preview (Applications - Preview).
    BTW PLEASE complete your profile. It's very difficult to help  someone when they don't provide any information about their system. You can easily do this by clicking Your Stuff in the upper right of this page, then click Profile and fill in the pertinent information.

  • "Aspect Ratio of this file is not supported"

    HI
    While I have used Premier Pro for some time, I am only an occasional creator of DVD.  Today I have had the error message above, but am unsure where to start to sort it out.
    I have loaded up an HVD original (1440*1080) into PP and then, after some editing used Dynamic Link to 'Send to Encore'.  This worked fine and I can see edits in PP cause the Encore footage to be updated
    However, when I try to build the project, for output to a DVD folder, I get a message stating:
    PGC "File name.prproj" has an error at time X
    The Aspect Ratio of this file is not supported by DVD-PGC Info: name = filename, ref=Bpgc, time = X
    I'm pretty sure I've done something simple and/or stupid, but can anyone point me in the right direction?
    I tried to search the forums for aspect ratio, but with no luck
    Many thanks

    Link to DVD Demystified FAQ http://forums.adobe.com/thread/544206?tstart=0
    >HVD original (1440*1080)
    Do you mean HDV via Firewire from a camera?
    That format will not work on a DVD, which is 720x480 (US, foreign is slightly different)
    Someplace along the line, you need to downsize to be legal for a DVD

  • Error "This class does not support SAAJ 1.3" in oim 11g

    hai all,
    i have error "This class does not support SAAJ 1.3" when i running create user.
    i already tried added in startWeblogic.cmd and in setDomainEnv.cmd :
    -Djavax.xml.soap.MessageFactory=weblogic.xml.saaj.MessageFactoryImpl and -Djavax.xml.soap.MessageFactory=com.sun.xml.internal.messaging.saaj.soap.ver1_1.SOAPMessageFactory1_1Impl
    step like this site (http://blog.xebia.com/2009/07/14/jax-ws-cxf-and-saaj-on-oracle-weblogic-103/)
    i already too set path for = saaj-impl-1.3.jar but the error still same "This class does not support SAAJ 1.3"
    i used weblogic 10.3.5, i'm generate soap message used rt.jar (import javax.xml.namespace.QName; etc)
    any idea to solving this error ?
    thank's
    darvesth
    Edited by: darvesth on Mar 19, 2013 4:08 AM

    thank you darvest, i follow your step before.
    but i added any steps after that.
    1. include saaj-impl-1.13.jar and saaj-api.jar in project adapter
    2. add parameter "SOAPConstants.SOAP_1_2_PROTOCOL" in line code, MessageFactory mf= MessageFactory.newInstance()
    -> MessageFactory mf= MessageFactory.newInstance(SOAPConstants.SOAP_1_2_PROTOCOL);
    so, my problem already resolve..
    i hope this solution usefull to resolve our problem, darvest.
    thanks,
    Tim BENGA

Maybe you are looking for

  • Why can't I access two local online news sites?

    I can access any online publication....except two right in my backyard - the Detroit Free Press and the Detroit News. Anyone know why, or how I can fix it? I mac G5   Mac OS X (10.3.1)  

  • Is this possible in oracle?

    Hi guys, i was just curious whether this is possible to display in oracle like C? situation is like. I have to code like, it should ask user to enter the number. and then it should display the result on screen like this. e.g. if user enters 3 then it

  • Which memory for MBP 2.16, Core 2 Duo

    If this has been answered before than just point me in the right direction. I now have a MBP and am contemplating going to higher memory . That said the local apple store says use there memory, or ramjets ? OK, and to stay away from 3rd party memory,

  • PSE 8 Editor crashes on launch

    When I try to start the editor in PSE8 the editor workspace appears to be loading then I get a crash report stating that " Adobe has detected the application Elements Organizer has unexpectedly quit" (see below). I have tried uninstalling then reinst

  • Rename oledb command parameters

    Hi i am updating nearly 200 columns in oledb command.but it is showing param_0,1,2,3, etc i want makes sure those are not mis matched ,can i rename param0 as customer id Please urgent thanks in advance ADKR