Mpd won't start after recent upgrade

Hi!
After one of the last upgrades my mpd service does not start anymore.
● mpd.service - Music Player Daemon
Loaded: loaded (/usr/lib/systemd/system/mpd.service; enabled)
Active: failed (Result: exit-code) since Di 2014-09-30 10:21:04 CEST; 2s ago
Process: 1489 ExecStart=/usr/bin/mpd --no-daemon (code=exited, status=1/FAILURE)
Main PID: 1489 (code=exited, status=1/FAILURE)
Sep 30 10:21:04 lu10855 systemd[1]: Started Music Player Daemon.
Sep 30 10:21:04 lu10855 mpd[1489]: fatal_error: Failed to set group 92: Operation not permitted
Sep 30 10:21:04 lu10855 systemd[1]: mpd.service: main process exited, code=exited, status=1/FAILURE
Sep 30 10:21:04 lu10855 systemd[1]: Unit mpd.service entered failed state.
If I start mpd directly with mpd --no-daemon as root or via sudo it starts without any problems.
Group 92 is audio and the user mpd is part of that group. Do you have any ideas what is going wrong here?
Best Regards,
Robin
Last edited by jayasinghe (2014-09-30 08:43:43)

jayasinghe wrote:
Hi!
After one of the last upgrades my mpd service does not start anymore.
● mpd.service - Music Player Daemon
Loaded: loaded (/usr/lib/systemd/system/mpd.service; enabled)
Active: failed (Result: exit-code) since Di 2014-09-30 10:21:04 CEST; 2s ago
Process: 1489 ExecStart=/usr/bin/mpd --no-daemon (code=exited, status=1/FAILURE)
Main PID: 1489 (code=exited, status=1/FAILURE)
Sep 30 10:21:04 lu10855 systemd[1]: Started Music Player Daemon.
Sep 30 10:21:04 lu10855 mpd[1489]: fatal_error: Failed to set group 92: Operation not permitted
Sep 30 10:21:04 lu10855 systemd[1]: mpd.service: main process exited, code=exited, status=1/FAILURE
Sep 30 10:21:04 lu10855 systemd[1]: Unit mpd.service entered failed state.
If I start mpd directly with mpd --no-daemon as root or via sudo it starts without any problems.
Group 92 is audio and the user mpd is part of that group. Do you have any ideas what is going wrong here?
Best Regards,
Robin
Systemd now starts the service as the mpd user by default (see /usr/lib/systemd/system/mpd.service). You can restore the previous behaviour by creating /etc/systemd/system/mpd.service.d/user.conf with the following content:
[Service]
User=
(will run mpd as root, which then has the capabilities to su to another user)
Though I'd recommend that you just let systemd handle the permissions setting rather than mpd. Comment out the user/group declarations in your mpd.conf and change the User declaration to the user/uid you want. Add in a Group declaration if you want too, though I don't think running processes as the audio group is a Good Idea™.

Similar Messages

  • Won't start after recent upgrade

    Started the recent upgrade. A depiction of the apple tv and usb cable connected on one end to tv and other end pointing to iTunes icon then showed up on the tv screen. Let run overnight and still will not connect. I am pretty sure battery in remote is fine; remote was working fine before the upgrade.

    The update has failed.
    You need to connect to iTunes on a computer with a cable.
    Using a USB to microUSB lead (that Apple annoyingly don't include!), try to restore the AppleTV software to current version software using instructions here:
    http://support.apple.com/kb/HT4367
    Pay attention to differences in power connection depending on whether or not you have AppleTV2 or AppleTV 3.

  • X server won't start after recent catalyst-test and kernel upgrade

    Hi,
    after recent upgrade of catalyst-test (13.2) and kernel (3.7.5), my x server won't start with this log (WW) and (EE) only:
    [   114.989] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [   116.077] (WW) Falling back to old probe method for fglrx
    [   116.093] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
    [   116.101] (EE) fglrx(0): DAL initialization failed!
    [   116.101] (EE) fglrx(0): Display Infrastructure Failed
    [   116.101] (EE) fglrx(0): PreInit failed
    [   116.212] (EE) Screen(s) found, but none have a usable configuration.
    [   116.212]
    Fatal server error:
    [   116.212] no screens found
    [   116.212] (EE)
    Please consult the The X.Org Foundation support
         at http://wiki.x.org
    for help.
    [   116.212] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [   116.212] (EE)
    [   116.515] Server terminated with error (1). Closing log file.
    My card is mobility radeon hd 5700, I'm running on x86_64 system. I'm using aticonfig generated xorg.conf. I will provide any other information if needed.
    I've tried:
    - to downgrade to catalyst 12.8 and xorg 1.12 (screen just freezes after trying to get to X, only poweroff button works (system catches the signal and shuts down softly - no errors in Xorg.0.log))
    - to use catalyst-total 13.1 / catalyst-generator 13.1 (Xorg.0.log says something about *not* compatible module - i can try it again and give you the whole log, it is probably another problem)
    - to use open-source drivers (poor performance, overheating)
    - to check nomodeset option (present at all kernel images in generated grub.cfg)
    Unfortunately, I could not find any similar issue solved in past few days...

    Downgrading kernel to 3.7.4 actually worked for catalyst 13.1. Anyone knows what could be wrong for linux 3.7.5?
    Edit: catalyst-test 13.2 beta works with linux 3.7.4.
    Last edited by sirkubador (2013-02-05 14:24:44)

  • Itunes just won't start after the upgrade

    I've upgraded my itunes, and done all the double checks I've found on this site. My itunes just will not start after the upgrade. It's frustrating to say the least because I can't even access my libary or edit my ipod. I've tried everything including uninstalling and reinstalling.. please help! I wanted to put my audio books on my ipod for a roadtrip tomorrow!

    Thanks Katrina. I was able to find what I needed through the link that you provided.
    To those that are having this problem, here's what I did to fix this issue:
    +If I have a computer or device that does not work well with an AWD with the latest update, how can I install previous (earlier) versions of firmware?+
    +1. Open AirPort Utility.+
    +2. From the AirPort Utility menu, hold the Option key *(Control key in Windows XP and Vista)* and choose Check for Updates....+
    +3. Select the specific firmware version you require.+
    +4. Click Download.+
    +5. Select your base station and choose Manual Setup from the Base Station menu, or double-click on the AWD icon.+
    +6. Choose Base Station > Upload Firmware.+
    +7. Select a firmware version and click OK.+
    +An important note about installing firmware+
    +After you have successfully installed a firmware update, AirPort Utility will wait for the AWD to restart. Once the AWD is available, AirPort Utility will display the standard configuration setup window with the Manual Setup and Continue buttons. Unless you intentionally wish to change some configuration of one of your apple Wireless Devices, you do not need to click Continue. At this point, simply quit AirPort Utility. Your AWD should be functioning correctly.+
    http://support.apple.com/kb/HT1218
    I chose firmware: Airport Extreme with 8-2.11n (Fast Ethernet) 7.3.2 Be patient, as Airport Utility will report that it can't find the AEBS, but after a short while mine was back. I did not roll back my version of Airport Utility.
    All appears to be normal and the iTunes library is rebuilding as I type this. Hopefully, Apple will figure out what's causing the problem with firmware 7.4.1

  • Macbook won't start after recent update

    Hi Guys,
    Got a problem with a month old Macbook. Clicked for the recent updates and after it restarting the Macbook won't start up past the Apple logo and the rotating symbol beneath it.
    Any ideas ? Thanks in advance
    Nick

    Hi Nick,
    Check out these two articles:
    http://support.apple.com/kb/TS1541 (Mac OS X 10.5: Troubleshooting installation, startup, and login issues)
    http://support.apple.com/kb/HT2956 (Troubleshooting Mac OS X installation from CD or DVD)
    Running Disk Utility and trying to verify the startup volume or starting up in Safe Mode would probably be the next best course of action.

  • WCS won't start after Linux Upgrade

    Hi,
    I've just upgrade RH to v5.0 and it all seemed to go fine except WCS won't start. I was running v5.0.56.0 on RH v4.0 (I know it's not supported) on a WLSE appliance, which ironically seemed to be fine. Now I get this....
    Database server is running
    Apache server is stopped
    WCS is registered, but not initialized.
    The Server seems to be unavailable. The possible reasons are
    1. The server is not running yet.
    2. The server is hanging.
    3 The server has crashed.
    If the server has crashed or is hanging
    Please report the issue and follow the instructions to restart it.
    1. Run StopWCS to stop all WCS processes.
    2. Run StartWCS to start the WCS server.
    3. If the server still fails to start, or you still get this
    message, then reboot the machine.
    Any suggestions will be most welcome.
    Thanks
    Scott

    Hi Lucien,
    Thanks for the suggestions - unfortunately I can't get dbadmin to do anything;
    [root@nlcwcs1 bin]# dbadmin ?
    -bash: dbadmin: command not found
    [root@nlcwcs1 bin]# DBAdmin ?
    -bash: DBAdmin: command not found
    [root@nlcwcs1 bin]# dbadmin.sh
    -bash: dbadmin.sh: command not found
    [root@nlcwcs1 bin]#
    Am I in the right directory?
    [root@nlcwcs1 WCS5.0.56.0]# cd bin
    [root@nlcwcs1 bin]# dir
    aclProtocol.sql upgrade_2.2_b.sql
    Backup upgrade_2.2_c.sql
    Backup.lax upgrade_3.0-3.1.sql
    CVS upgrade_3.0_Beta1_Beta2.sql
    DBAdmin upgrade_3.0_Beta2_Beta3.sql
    DBAdmin.lax upgrade_3.1-3.2.sql
    dbadmin.sh upgrade_3.2_Beta1_Beta2.sql
    EULA.html upgrade_4.0_Beta1_Fcs.sql
    If I am, can you tell me how to use these commands please?
    Many Thanks
    Scott

  • [BDB/OpenLDAP] OpenLDAP won't start after BDB upgrade

    After upgrading to BDB 4.6.21-1, my OpenLDAP-server doesn't start anymore displaying some error about environment mismatch. When upgrading BDB I saw the message I needed to upgrade the database, but that didn't work because the environment versions were different. (I've been trying to get this sh!t running for over two hours, deleted the database files in the meantime so I can't reproduce the error anymore ..)
    According to JGC in http://bbs.archlinux.org/viewtopic.php?id=31375, where somebody has a similar problem, the following should be 100% working:
    1) /etc/rc.d/openldap stop
    it is stopped, wouldn't even start after reboot
    2) slapcat -l /root/ldif
    I made backup yesterday using this method
    3) pacman -S openldap
    local version is up to date
    4) rm /var/lib/openldap/data/* (though you could keep a backup of DB_CONFIG)
    check
    5) slapadd -l /root/ldif
    bdb_back_initialize: BDB library version mismatch: expected Berkeley DB 4.6.19: (August 10, 2007), got Berkeley DB 4.6.21: (September 27, 2007)
    backend_init: initialized for type "bdb"
    slapadd: slap_init failed!
    6) /etc/rc.d/openldap start
    it doesn't start (Fail). Starting manually with debugging on level 255, I get the following:
    [root@kitten openldap]# /usr/sbin/slapd -f /etc/openldap/slapd.conf -d 255
    @(#) $OpenLDAP: slapd 2.3.38 (Sep 29 2007 14:38:33) $
            tobias@T-POWA-LX:/home/tobias/Install/Arch/arch-cvs/extra/daemons/openldap/src/openldap-2.3.38/servers/slapd
    daemon_init: <null>
    daemon_init: listen on ldap:///
    daemon_init: 1 listeners to open...
    ldap_url_parse_ext(ldap:///)
    daemon: IPv6 socket() failed errno=97 (Address family not supported by protocol)
    daemon: listener initialized ldap:///
    daemon_init: 2 listeners opened
    slapd init: initiated server.
    slap_sasl_init: initialized!
    bdb_back_initialize: initialize BDB backend
    bdb_back_initialize: BDB library version mismatch: expected Berkeley DB 4.6.19: (August 10, 2007), got Berkeley DB 4.6.21: (September 27, 2007)
    backend_init: initialized for type "bdb"
    slapd destroy: freeing system resources.
    slapd stopped.
    connections_destroy: nothing to destroy.
    Any help appreciated, I really don't know what to do about this!

    Someone opened a bug report for it already. Glad I'm not the only one with this problem http://bugs.archlinux.org/task/8311

  • Apps won't start after iOS5 upgrade for ipad2

    Hi, after upgrading my ipad with the latest iOS. when you clck on any apps..it starts and then minimize..when you double click on the home buttom..you will see the apps there. Please advice.

    If it's happening on all the apps that you've downloaded from the App Store, but not the Apple built-in ones, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
    Otherwise have you tried closing all apps completely and then seeing if they work when you re-open them ? From the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Safari won't start after Yosemite upgrade

    Safari won't connect to internet after upgrading to Yosemite

      Go step by step by step and test.
    1. Power off the router. Unplug it from the wall. Wait a while.
        Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
        Restart the computer.
        Start up in Safe Mode.
        http://support.apple.com/kb/PH14204
    2. Deselect Proxies if selected.
       System Preference > Network > Advanced  > Proxies Tab
       Under "Select Protocol", uncheck any box if selected.
       Click "OK" then  "Apply”.
    3. Delete Caches.db
        Close all windows and quit all applications.
        Hold "option" key down and click "Go" menu in the Finder menu bar.
        Select "Library" from the dropdown.
        Library > Caches > com.apple.Safari > Caches.db
        Right click the Caches.db file and select "Move To Trash.
        Close windows and relaunch Safari.
    4. Empty Caches
        Safari > Preference > Advanced
        Checkmark the box for "Show Develop menu in menu bar".
        Develop menu will appear in the Safari menu bar.
        Click Develop and select "Empty Caches" from the dropdown.
    5. Safari > Preferences > Extensions
        Turn off Extensions if any and launch Safari again to test.
        Turn on those one by one and test.

  • IPad won't start after iOS7 upgrade and reset

    Hi,
    I have just tried to upgrade to iOS7 through WiFi. No luck. So I upgraded via iTunes. When it finally was finished, I tried to turn on my iPad, but it wouldn't. It gets stuck at the Apple logo with a loading bar just under it. I did a full reset on iTunes and I can only get to the loading bar (which won't load).. Any suggestions?

    I was experiencing the same thing.  This article worked for me, hopefully it will help you.
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    Hold both the home button and the wake/suspend button down at the same time. You should see the Apple logo appear on your screen after holding these buttons down a couple of seconds, which means your iPad is booting up and should be good to go in a few more seconds.

  • ITunes Won't Start After Airport Upgrade

    After running the latest upgrade to Airport Utility and upgrading the firmware on my Airport Extreme, I lost all access to my iTunes library that is housed on a Drobo attached to the Airport. When trying to start iTunes, I get error "13005".
    I normally access my library from both a Windows XP/SP3 box and a MacBook. I have tried the following steps:
    1) deleted genius.itdb and extras.itdb.
    2) Repaired iTunes install.
    3) Removed and reinstalled iTunes.
    4) Plugged the Drobo directly into the Windows box (no airport or USB hub).
    Still no love. I was able to rebuild my library via my MacBook, and I created a Windows XP user account which can successfully run iTunes and see the library once I rebuilt it. However my main XP account (with Admin access) still cannot start iTunes.
    Any thoughts would be greatly appreciated. Thanks.
    Fogbert

    Thanks Katrina. I was able to find what I needed through the link that you provided.
    To those that are having this problem, here's what I did to fix this issue:
    +If I have a computer or device that does not work well with an AWD with the latest update, how can I install previous (earlier) versions of firmware?+
    +1. Open AirPort Utility.+
    +2. From the AirPort Utility menu, hold the Option key *(Control key in Windows XP and Vista)* and choose Check for Updates....+
    +3. Select the specific firmware version you require.+
    +4. Click Download.+
    +5. Select your base station and choose Manual Setup from the Base Station menu, or double-click on the AWD icon.+
    +6. Choose Base Station > Upload Firmware.+
    +7. Select a firmware version and click OK.+
    +An important note about installing firmware+
    +After you have successfully installed a firmware update, AirPort Utility will wait for the AWD to restart. Once the AWD is available, AirPort Utility will display the standard configuration setup window with the Manual Setup and Continue buttons. Unless you intentionally wish to change some configuration of one of your apple Wireless Devices, you do not need to click Continue. At this point, simply quit AirPort Utility. Your AWD should be functioning correctly.+
    http://support.apple.com/kb/HT1218
    I chose firmware: Airport Extreme with 8-2.11n (Fast Ethernet) 7.3.2 Be patient, as Airport Utility will report that it can't find the AEBS, but after a short while mine was back. I did not roll back my version of Airport Utility.
    All appears to be normal and the iTunes library is rebuilding as I type this. Hopefully, Apple will figure out what's causing the problem with firmware 7.4.1

  • Mac Mini Won't Start after RAM upgrade

    Hi, I just tried upgrading my RAM from 1GB to 2GB on my Intel Core Solo Mac Mini. When i hooked everything back up it wouldn't start up. So I replaced the original RAM and the same thing happened. I get to the gray apple screen with the gray spinning wheel and then it just shuts off. What could be my problem? Are their any solutions?

    Welcome to Apple Discussions, though I suspect the circumstances could be better!
    It's not unusual for 'bad RAM' to cause a system to fail to boot, but the disturbing feature of your problem is that when the previous memory is reinserted, the system continues to fail. What makes it worse is that you describe the system shutting off after failing to boot - that is not a common symptom of something simple like bad memory, and may mean that in the initial upgrade, something was damaged or dislodged, or not reconnected correctly.
    I would open up the system again, and disassemble it sufficiently that you can reseat the original RAM which was working correctly prior to the upgrade, then check that everything is connected correctly internally, and the CPU heatsink is firmly attached. If that doesn't result in the system working, or at least in different symptoms such as being stuck on the grey screen but no longer shutting down, then I would look for an Apple store in the area and make an appointment at the genius bar for them to have a look - that would not bear a cost in the first instance for them to give their opinion.

  • CiscoWorks won't start after LMS upgrade 3.0 - 3.2 ERROR 502 Bad Gateway in Portal

    I upgraded CiscoWorks LMS from 3.0 to 3.2 today.  Everything worked prior to the upgrade.
    The upgrade was successful, with no errors, and all services started.
    Can anyone help, and check everything and I see no problem. The system creates the file MDCSupportInformation.zip me clean without any content.
    I add the installation log file;
    And tell them that after upgrading to 3.2, you carge the following patches:
    LMS321-win-CSCtr77570-0.zip,
    cm5.2.1-nt-CSCtw88763-1.0.zip,
    lms3.2.1-win-CSCts95764-0.zip,
    lms3.2.1-win-CSCts82530-0.zip
    in that order.
    He added the logs generated by the LMS services Tomcat and Apache

    Hi,
    Here are the various errors/warning I found while looking through the attached logs.
    WARNING:The application that you are installing requires new tasks to be
    WARNING:registered with ACS. If you have already registered this application
    WARNING:with ACS from another server, you do not need to register it again.
    WARNING:However if you re-register the application, you will lose any custom
    WARNING:roles that you  had created earlier for this application  in ACS.
    WARNING:Some features in ACS may not work correctly on Dual-stack servers.
    Warning: System memory is less than the minimum requirement.This may affect performance.
    Warning: Current swap space is less than the minimum requirement. This may affect performance.
    WARNING: The available RAM is 4086 MB which is lesser than the required RAM of 4096 MB. User chose to continue the installation
    WARNING: Domain Name is not found from TcpIp parameters, setting PX_FQDN same as PX_HOST
    INFO: User Selected to Reboot the Machine
    Installation Completed at 16:38:06
    Nov 23, 2012 7:59:11 PM org.apache.tomcat.util.threads.ThreadPool$ControlRunnable run
    SEVERE: Caught exception (java.lang.NoClassDefFoundError) executing org.apache.jk.common.ChannelSocket$SocketConnection@d888c7, terminating thread
    [warn] RSA server certificate CommonName (CN) `LOND-CW-MDF-1' does NOT match server name!?
    [Fri Nov 23 19:19:46 CST 2012] CMFX - fileLoc is \C:\PROGRA~1\CSCOpx\lib\classpath\md.properties
    [ Fri Nov 23 19:22:22 CST 2012 ] TomcatMonitor After gettingAJPPort
    [ Fri Nov 23 19:22:22 CST 2012 ] TomcatMonitor After gettingAJPPort : ajpPort = 9009 and host =LOND-CW-MDF-1
    Cookie value is invalid
    LTGateway.run(): connection to LWMS failed, trying again,  Nov 23 19:22:28
    You have a BUNCH of the ChannelSocket$SocketConnection exceptions.
    The next step for you:
    Check the running processes via cmd line (pdshow -brief).
    Check that all processes are running as expected.  If they are then take a look at what is keeping ports open on your box (netstat -anob).  From above, the reason may be an application occupying a port LMS needs.  Also check the Windows error logs.
    Check the following services, they should look like:
    Ciscoworks ANI database engine :Manual
    CiscoWorks Daemon Manager :Auto
    CiscoWorks RME NG database :Manual
    CiscoWorks Tomcat Servlet engine : Manual
    CW VisiBroker Smart Agent :Manual
    CiscoWorks Web Server :Manual
    CWCS Cmf database engine :Manual
    CWCS rsh/rcp service :Auto
    CWCS syslog service :Auto
    CWCS tftp service :Auto
    DFM dfmEpm :Manual
    DFM dfmFh :Manual
    DFM dfmInv :Manual
       4.  Log in as the local Administrator (not Domain).
    Stop daemons (net stop crmdmgtd)
    CSCOpxMDC\Apache\perl ConfigSSL.pl -disable
    CSCOpx\MDC\Apache\perl ConfigSSL.pl -enable (Answer when prompted)
    navigate to ..\NMSROOT\setup\support
    Execute resetCasuser.exe
    Start Daemons (net start crmdmgtd) and wait 20 minutes.
    Check if condition persists.
       5.  Check the output of  ..\NMSROOT\MDC\Apache\bin>pdreg -l Apache
    A couple other things:
    Set the server name to be the server name with the domain as well.
    Set the primary DNS suffix to match
    Modify md.properties & Registry & set PX_FQDN to the above.
    - HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet
    - HKEY_LOCAL_MACHINE\SOFTWARE\Cisco\ResourceManager\CurrentVersion\Environment
    Thanks.

  • Iphoto won't start after lion upgrade

    I installed the Lion upgrade and now I am unable to open iPhoto 09.  Any ideas?  Here is the message:
    Process:         iPhoto [9483]
    Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
    Identifier:      com.apple.iPhoto
    Version:         8.1.2 (8.1.2)
    Build Info:      iPhotoProject-4240000~8
    Code Type:       X86 (Native)
    Parent Process:  launchd [8176]
    Date/Time:       2012-01-02 12:43:31.672 -0600
    OS Version:      Mac OS X 10.7.2 (11C74)
    Report Version:  9
    Sleep/Wake UUID: A70FC8E4-B25F-4686-80D4-884636B345CB
    Interval Since Last Report:          1236 sec
    Crashes Since Last Report:           10
    Per-App Crashes Since Last Report:   10
    Anonymous UUID:                      EE8765B0-FA49-422E-9613-08D9A3A796D4
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    Dyld Error Message:
      Library not loaded: /System/Library/PrivateFrameworks/iLifeSlideshow.framework/Versions/A/iLifeSlid eshow
      Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
      Reason: image not found
    Binary Images:
        0x1000 -   0x9fbfee  com.apple.iPhoto (8.1.2 - 8.1.2) <436E886C-E26D-2C7D-9745-252829318EFE> /Applications/iPhoto.app/Contents/MacOS/iPhoto
      0xb31000 -   0xb5cff3  com.apple.DiscRecordingUI (6.0 - 6000.4.1) <008D8106-E34E-3F05-AB98-24AAC8344D03> /System/Library/Frameworks/DiscRecordingUI.framework/Versions/A/DiscRecordingUI
      0xb74000 -   0xb76fff  com.apple.ExceptionHandling (1.5 - 10) <7C514CC4-7951-31CA-AEB3-D4AF49F44AE7> /System/Library/Frameworks/ExceptionHandling.framework/Versions/A/ExceptionHand ling
      0xb7c000 -   0xc29ff7  libcrypto.0.9.7.dylib (0.9.7 - compatibility 0.9.7) <7B6DB792-C9E5-3772-8734-8D0052757B8C> /usr/lib/libcrypto.0.9.7.dylib
      0xc6e000 -   0xc78fff  com.apple.UpgradeChecker (1.0 - 1.1) /Applications/iPhoto.app/Contents/Frameworks/UpgradeChecker.framework/Versions/ A/UpgradeChecker
      0xc82000 -   0xd1effc  com.apple.MobileMe (8 - 1.0) <47DF6C20-78C5-1AA2-1D64-274EAE522D93> /Applications/iPhoto.app/Contents/Frameworks/MobileMe.framework/Versions/A/Mobi leMe
      0xd80000 -   0xd80fff +eOkaoCom.dylib (??? - ???) <17ADB0F4-BF83-0B0B-5293-F843F1724644> /Applications/iPhoto.app/Contents/MacOS/eOkaoCom.dylib
      0xd84000 -   0xdb7fe7 +eOkaoDt.dylib (??? - ???) <673BD0C5-FAC4-ABB7-B55E-FD8A75E4759D> /Applications/iPhoto.app/Contents/MacOS/eOkaoDt.dylib
      0xdbd000 -   0xf23fff +eOkaoFr.dylib (??? - ???) <684982FE-55E4-174D-9CF3-DA4319BD57F9> /Applications/iPhoto.app/Contents/MacOS/eOkaoFr.dylib
      0xf27000 -   0xf4bff2 +eOkaoPt.dylib (??? - ???) <E2ED8DE8-7A2D-8309-3CB5-2E87F135A8A8> /Applications/iPhoto.app/Contents/MacOS/eOkaoPt.dylib
      0xf52000 -   0xf99ff7  com.apple.proxtcore (1.0.0 - 1.0.0) /Applications/iPhoto.app/Contents/Frameworks/ProXTCore.framework/Versions/A/Pro XTCore
    0x8fe0a000 - 0x8fe3c9c7  dyld (195.5 - ???) <BCC83F99-7244-3DBA-867D-6226D53DD9F2> /usr/lib/dyld
    0x90a79000 - 0x90d85ff1  com.apple.MessageFramework (5.1 - 1251.1) <9A36CBE7-C9B0-37E3-94CD-0617D81297C4> /System/Library/Frameworks/Message.framework/Versions/B/Message
    0x90dd9000 - 0x9108bff7  com.apple.security (7.0 - 55010) <BE0350C5-5221-3BFF-B674-646AB1BA0F2E> /System/Library/Frameworks/Security.framework/Versions/A/Security
    0x9108c000 - 0x911a3fe9  com.apple.WebKit (7534.52 - 7534.52.7) <BC37DBEF-DC40-3FF0-A2EA-7B445FE4A3A8> /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
    0x938cf000 - 0x938ddfff  com.apple.opengl (1.7.5 - 1.7.5) <81166D23-DE8E-3938-AAD3-29B1FA5E446E> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
    0x93b47000 - 0x93babfff  com.apple.framework.IOKit (2.0 - ???) <D14460ED-2B6C-375D-B3A4-B8C82E922666> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
    0x951e8000 - 0x9534afff  com.apple.QTKit (7.7.1 - 2306) <5A7E5ED0-C4DC-3CEC-ABE0-24899134ACE1> /System/Library/Frameworks/QTKit.framework/Versions/A/QTKit
    0x9562c000 - 0x9570dfff  com.apple.DiscRecording (6.0 - 6000.4.1) <6BD9120F-8128-3B85-8ACB-0924615425DD> /System/Library/Frameworks/DiscRecording.framework/Versions/A/DiscRecording
    0x95918000 - 0x95a27ff7  libsqlite3.dylib (9.6.0 - compatibility 9.0.0) <90D36793-04A5-3BFF-BE83-EEEDCBEDC756> /usr/lib/libsqlite3.dylib
    0x9632f000 - 0x96344fff  com.apple.iChat.InstantMessage (6.0 - 835) <F80F4A61-5EDE-3995-9FFE-49A1AD1BC9D0> /System/Library/Frameworks/InstantMessage.framework/Versions/A/InstantMessage
    0x9638f000 - 0x9640dff7  com.apple.iLifeMediaBrowser (2.6.1 - 502.1.5) <15323460-62E8-39BC-ACF0-E0C3A916C994> /System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/iLifeM ediaBrowser
    0x9697f000 - 0x96b33ff3  libicucore.A.dylib (46.1.0 - compatibility 1.0.0) <6AD14A51-AEA8-3732-B07B-DEA37577E13A> /usr/lib/libicucore.A.dylib
    0x96bb1000 - 0x96bedfff  libcups.2.dylib (2.9.0 - compatibility 2.0.0) <AA56493C-D7C6-3D4F-8DC8-855405AFF57B> /usr/lib/libcups.2.dylib
    0x96bee000 - 0x96beeff0  com.apple.ApplicationServices (41 - 41) <C48EF6B2-ABF9-35BD-A07A-A38EC0008294> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
    0x96bf1000 - 0x96bf1fff  com.apple.Cocoa (6.6 - ???) <5FAFE73E-6AF5-3D09-9191-0BDC8C6875CB> /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
    0x99aea000 - 0x99cc0fe3  com.apple.CoreFoundation (6.7.1 - 635.15) <AC9F6462-6315-3D89-8075-D048DB4DBF7E> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
    0x99f29000 - 0x99f29ff2  com.apple.CoreServices (53 - 53) <7CB7AA95-D5A7-366A-BB8A-035AA9E582F8> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
    0x9a146000 - 0x9a3f5ff7  com.apple.AddressBook.framework (6.1 - 1062) <8992D5C7-DC3C-3009-8A9E-A6937B91BB4D> /System/Library/Frameworks/AddressBook.framework/Versions/A/AddressBook
    0x9a564000 - 0x9a564fff  com.apple.Carbon (153 - 153) <F996332A-390E-3337-A09E-A1E54004B567> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
    0x9a565000 - 0x9a573fff  libz.1.dylib (1.2.5 - compatibility 1.0.0) <E73A4025-835C-3F73-9853-B08606E892DB> /usr/lib/libz.1.dylib
    0x9a828000 - 0x9aaadfe3  com.apple.QuickTime (7.7.1 - 2306) <F8C64DC4-3FE4-3A06-B10B-59E7F3BA6FDD> /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime
    0x9b71a000 - 0x9b71afff  com.apple.Accelerate (1.7 - Accelerate 1.7) <4192CE7A-BCE0-3D3C-AAF7-6F1B3C607386> /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate
    0x9ba43000 - 0x9ba8afff  com.apple.SystemConfiguration (1.11.1 - 1.11) <CA6CE2B6-DC18-31FF-9668-70BB2FD8D7BB> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
    Model: iMac7,1, BootROM IM71.007A.B03, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.21f4
    Graphics: ATI Radeon HD 2600 Pro, ATI,RadeonHD2600, PCIe, 256 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR2 SDRAM, 667 MHz, 0x7F7F7F1900000000, 0x4D4943533338554642203247422020202020
    Memory Module: BANK 1/DIMM1, 2 GB, DDR2 SDRAM, 667 MHz, 0x7F7F7F1900000000, 0x4D4943533338554642203247422020202020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.11)
    Bluetooth: Version 4.0.1f4, 2 service, 18 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: WDC WD3200AAJS-40RYA0, 320.07 GB
    Parallel ATA Device: OPTIARC  DVD RW AD-5630A
    USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd400000 / 3
    USB Device: USB2.0 Hub, 0x05e3  (Genesys Logic, Inc.), 0x0606, 0xfd100000 / 2
    USB Device: Mass Storage Device, 0x058f  (Alcor Micro, Corp.), 0x6366, 0xfd110000 / 7
    USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd120000 / 5
    USB Device: Apple Keyboard, apple_vendor_id, 0x0220, 0xfd122000 / 6
    USB Device: USB Flash Memory, 0x0930  (Toshiba Corporation), 0x6544, 0xfd140000 / 4
    USB Device: External HDD, 0x1058  (Western Digital Technologies, Inc.), 0x0910, 0xfa400000 / 3
    USB Device: hub_device, 0x050d  (Belkin Corporation), 0x0237, 0xfa200000 / 2
    USB Device: HL-5250DN, 0x04f9  (Brother International Corporation), 0x002b, 0xfa240000 / 7
    USB Device: Officejet Pro 8000 A809, 0x03f0  (Hewlett Packard), 0x3612, 0xfa230000 / 6
    USB Device: USB2.0 MFP(Hi-Speed), 0x04b8  (Seiko Epson Corp.), 0x083c, 0xfa250000 / 5
    USB Device: FreeAgentDesktop, 0x0bc2  (Seagate LLC), 0x3000, 0xfa220000 / 4
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8206, 0x1a100000 / 2

    You need to reinstall as iPhoto is missing background frameworks required to work.
    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

  • Kdm won't start after xorg7 upgrade

    I can run startx and things startup okay (except no background color in icewm on desktop), but I can't get kdm to start.  My /etc/inittab is configured correctly and hasn't changed. 
    Any ideas?
    Darin

    Did you upgrade to KDE 3.5.1 at the same time as upgrading to Xorg 7? Maybe try a different mirror if your present mirror hasn't been updated yet with the new KDE version, that should fix your KDM problem.
    A temporary solution could be to make a symlink pointing from /usr/X11R6/bin/X to /usr/bin/X (ln -sf /usr/bin/X /usr/X11R6/bin/X , remember to create the /bin directory in X11R6 if it isn't there)
    Regards
    Simon

Maybe you are looking for