Mpeg audio not playing back correctly

I just upgraded to CS6 and am doing my first project in it.
I have a Sony HVR-Z1U camera which i recorded HDV to and have captured this into PPro using HDV capture settings
Here is the result of the capture
File Path: V:\HC2012\Show\Untitled Clip 04.mpeg
Type: MPEG Movie
File Size: 9.5 GB
Image Size: 1440 x 1080
Frame Rate: 29.97
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:51:54:21
Pixel Aspect Ratio: 1.3333
When i try and play back the clip in CS6, the video comes out ok but the audio sounds like a chirp.
If i right clip the clip and say to edit in Audition, it sounds fine
If i play the file back from Explorer in Windows Media play it looks and sounds fine
If i import the same file into CS5.5 it plays both video and audio fine.
What am i doing wrong here?

Try clearing your media cache files and see if that fixes the issue. You can do so by going up top inside premiere and going  to "edit>prefrences>media then click where it says "clean" under media cache datebase. This might fix the problem.

Similar Messages

  • TS1424 i downloaded an album from i tunes, but it will not play back correctly,tracks stop half way through and skip to the next one. what can i do???

    I downloaded an album from i tunes, but it will not play back correctly,
    it starts a track and then stops randomly and jumps to the next track
    and then does the same thing ad ainfinitum! What to do??

    Other people have been having similar problems with songs over the last few days, I assume that there has been a problem with Apple's servers.
    Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting those tracks from your iTunes library and redownload them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
    If you aren't in a country where you can re-download music or if they re-download in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that album and use the 'Report a Problem' link.

  • HDV from AE not playing back correctly.. how to fix?

    Hi, I'm having a HDV footage from Sony V1 captured, exported as ref in AE for compositing. It's fine til then. The problem is when i export my comp from AE (HDV codec, upper field) and import it in FCP it can't be played back correctly. Even not at all....! Even after I render it. The clip properties says 3MB/sec... correct field, correct codec (HDV)... so I really don't see what i miss...
    Can someone help on this? I work on the Quad 2.5Ghz-4.5 GbRAM
    Thanks,
    Federico

    Sorry I wasn't clear. I rendered the clip in AE and had the same video lag not matching the audio. I just went back and rendered the entire sequence in Premiere which resulted in the video in sync with the audio (yeah!) but all the video clips appeared to be a bit pixelated, not as crisp as prior to rendering. I may not be using the best way to render. I simply went up to the Sequence tab in the top menu, chose render entire work area.

  • QuickTime movie made in QuickTime 7 audio not playing back in qt 10

    I made a qt using qt 7 pro, H.264 with the AAC audio compressor and that qt will not play back audio in QuickTime 10 which is what my client has on his computer.

    The point being here is that I rendered out a movie in QuickTime pro 7 and the audio isn't being resolved in QuickTime 10, even on my own computer.
    Does the audio play correctly in the QT 7 Player? Have you determined if this is a playback or a conversion problem? I asked about the source file since some source compression formats will not convert the audio using QT 7 Pro. In a similar manner, some AAC data rate and sampling rate combinations are not supported on the Mac which is why QT is programmed to disallow their use. (Unfortunately, I do not know what would happen if a source file using such audio settings were to be used as a source for a QT 7 Pro conversion.)
    How is this possible and should I just remove qt10 altogether?
    As already indicated, there are a number of "normal" problems that could give these results. In addition, QT changes made as part of the most recent Lion OS update seem to have had adverse effects on QT 7 Pro features (as evidenced by the loss of the "loop" playback feature and "green screen" problems on some platforms). As to the removal of QT 10, the embedded structures cannot be removed without corrupting the operating system. And, while the QT X player can be removed/deleted, why bother since you can just as easily opt not to use it for manual playback and restoring it, should you later change your mind, may present a problem.
    I am a professional editor, have been working on Macs since 1992 (Avid and FCP7) and have never had a compatibility problem like this before within the Mac environment.
    Have you made any recent changes to your normal work flow that might account for this problem and is the problem consistently repeatable?

  • The hoverover actions are not playing back correctly always

    Hello,
    I am developing manual test scripts using MTM2013. I see that hover over actions doesn't always play back correctly. The application has two levels of hover over levels in the sense i have to click on main hover over link which has multiple hover over links
    and then several links for the second layer of hover over links.
    Any suggestions on how to record and payback correctly consistently.

    Hi Starain,
    First of Thank you very much for looking into it.
    I have following features on Data Diagnostics on.
    1.ASP.NET Client Proxy for IntelliTrace and Test Impact and Intellitrace.
    2.When trying to configure ASP.NET intellitrace and test impact, it gives this message.
    3.When MTM gives that exception and gives option to close, it doesn't capture anything.
    4.I went to view Results for the test, i don't see anything captured.
    5.Can you tell me where is this Even viewer you are mentioning to look into?
    6.In mtm log file, I have configured as below as i have mentioned in another thread. Do you still recommend to go into the blog you mentioned above and set up as given in that.
    Please confirm that i ahve to still set uptrace file as mentioned in blog given in above thread and iwill go a head and try it.
    <system.diagnostics>
        <switches>
          <!-- Trace settings for MTM -->
          <!-- Change the value to change the level of tracing you want.
                You must use integral values for "value".  
                0 ==> off,
                1 ==> error,
                2 ==> warn,
                3 ==> info,
                4 ==> verbose.
                Note that each value is inclusive of the last.
            -->
          <add name="UITestTraceLevel" value="4" />
          <add name="EqtTraceLevel" value="4" />
          <add name="TestManagement" value="4" />
          <add name="TeamBuild" value="4" />
          <add name="TeamFoundationSoapProxy" value="verbose" />
        </switches>
        <trace autoflush="true">
        <listeners>
        <add name="myListener" type="System.Diagnostics.TextWriterTraceListener" initializeData="C:\temp\MTM_Trace.log"    />    
        </listeners>    
        </trace>
      </system.diagnostics>
    </configuration>
    Thanks again.

  • .mpg audio not playing back...

    Hi Folks! Got a little challenge for ya'll...
    PPC 2.0 Dual Core with leopard. & QTpro 7.6.9
    Mac Book 2.16 intel dual core running Tiger & QTpro 7.6.4
    Both units have IDENTICAL FCP Studio 2 6.06. The compressor set ups/exports are exactly the same.
    The only variable.... intel on tiger, and PPC on leopard.. MPG plays fine on intel with tiger, but not on PPC with leopard...
    I used to be able to hear my mpg files on the ppc prior to leopard... and I did not upgrade my QT when intalling Leopard. Is this a variable anyone else has found? IS there an issue with Leopard or is this only a QT issue... I can't find a QT 7.6.9 upgrade to match these QT items to test this in stages... i also lost the use of Photoshop 7 with Leopard. This leads me to question if Leopard could be causing this audio issue as well. Just an assumption... As my Photoshop 7 works fine on Intel with Tiger as well... Clear as mud now?
    When I export mpg clips in Compressor they do not show or play audio on the PPC with Leopard. I transfer them to the Intel with Tiger and they play fine... They also play back fine on my stations Ultra Nexxus playback system... Craziness abounds here... Has anyone regained their mpg and photoshop 7 with Lion? Just asking....
    Any suggestions I'm not seeing? Thanks tons in advance...
    Joe Stanfill
    MJR VIdeo Productions

    What sort of MPEG files -1,2,3 or 4? Audio or video files?
    Photoshop 7 is old. Photoshop 8 (CS1) works fine on Leopard.
    Photoshop 7 is entirely PPC code and will not run on Lion under any circumstances.
    There's no such thing as QuckTime 7.6.9 -at least not publicly.
    7.6.6 is the latest version and Tiger doesn't qualify for it.

  • Music not playing back correctly

    For some reason, Itunes began playing back incorrectly.  The music is fine but the vocals sound like they are in a hole.  Not sure why.  Did this before and I do not recall how I got it back to playing normal.  Help plz!

    Every since the iOS 5 update, my music does not play correctly on my iPhone 4. I have tried all the fixes I have found, except to delete all my music from iTunes as well as my iPhone, and reimporting it all...are they kidding? I have thousands of songs from various sources, so that is not going to happen. When I heard about iOS 5.1, I hoped it would correct the issue, which it did, for about an hour or so. I will just cease to use my multitasking smart phone to play music and revert to my oldschool music player. I pause in wondering whether or not I should hold my breath on Apple coming to the rescue for its dedicated users. Oh yeah, some of the songs that do not play correctly or at all were purchased from iTunes on my iPhone 4, so this issue is not just related to songs imported from CDs.

  • Recorded Audio Not playing back in Premiere Pro

    I use Dxtory to record; Sound from system as well as mutual programs such as skype all playback as intended. The audio from my microphone, though it plays back when reviewing it in a media program, is not present when I import it into Premiere. Still new to all of this. Any suggestions?

    Hi AkaDc,
    Though it was made for Premiere Pro CS6, this video tutorial should assist you:
    Hope it helps.
    Thanks,
    Kevin

  • Quicktime not playing back correctly

    In FCP I exported Quicktime Movie. When I playback in Quicktime and manually drag to the end of the movie, it freezes and then turns black. When I go back to start and replay, the screen stays black and only plays the audio. I'm running the latest version of Quicktime. What's interesting is that I have an older version of Quicktime and the movie plays fine in it. Thanks.

    Your Cinema Display isn't really capable of showing interlaced footage with any sort of accuracy. What you see externally on the NTSC monitor is what you really have. If you must use the CD as a full screen display you need to get an "adapter" box that will rectifiy the problem. AJA & Blackmagic both make boxes, or the Matrox MXO would be the solution I believe. The MXO does some pretty neat tricks other than allow your CD to display interlaced footage correctly... Down converts HD to SD for one thing in RT, as well as allowing the CD to display things as they should be looking.
    Jerry

  • Mp3's not playing back correctly

    Hey guys/gals, I'm in need of alittle help. I just installed iTunes 10.5.0.142 and i've been using iTunes 10.0 previous to this and now i find that all my songs that are in MP3 format are all scrambled. I've walked through everything i can think of, from checking my hadware acceleration to removing iTunes and reinstalling to removing audio drivers and reinstalling. the files play just fine on the same computer using Windows Media Player but i want my iTunes back working. ANY suggestions?

    If it is supposed to have video then it can't (or shouldn't) be a mp3. MP3 is audio only. MP4 is a possible video format, though there are many, many video formats out there so if your files are getting mislabeled you need to figure out what it should be. Most websites don't use pure mp4 for videos but wrap it as avi or mov or something

  • Videos in my iTunes are not playing back correctly.

    Every time I choose to play on of my music videos purchased from iTunes, it playsback really distorted and fuzzy sounding. I have checked all my connections ot see it it was a speaker issue, and I also checked to see if these same videos would play on windows media player and quick time, which they did. I have gone through apples page on video playback problems and did everything that applied to my computer and still I've had no luck. I am currently running windows 7 64-bit and am using iTunes version 10.4.0.80 which I recently updated to.

    The movies and tv shows in your iTunes library on your computer can be transferred to your iPad via the iTunes sync/transfer process. This is selected under the Movies and TV Shows tabs for your iPad sync preferences with iTunes. After the movies and tv shows are transferred, they will be available in the Videos app under iOS 5.

  • Images in iMovie not playing back

    I added an image to a project I had already been working on.  I then added an audio file to all of the images. When I hit the play button the image I added does not show in the playback but instead an image two away and then it plays the second and third fine. This happened to two images I inserted in the project.
    I noticed that the recently added images in iphoto when I click the camera icon have a green check mark in the corner.  What does that mean and is that stopping them from showing in the playback?
    I would appreciate any help.

    Fixed the issue myself. Here's a step-by-step because I what found online pertaining to this issue were not clear on how to fix it.  (Note that this is what I did to fix the problems, some of the steps might not be strictly necessary.)
    How to get movies to start playing back again in iMovie '09: 
    1.) Close iMovie.
    2.) Delete contents of the "iMovie Cache" folder for the event that is not playing back correctly.
             - There are were two files "Cache.mov" and "Cache.plist", I deleted both.
    3.) Restart iMovie
    This appeared to force the program to generate new files and start working correctly.  From what I read on other postings it was probably caused by the program not closing properly, which I seem to recall it crashing on me or my wife a while ago.
    @ Bengt Wärleby
    I appreciate you taking the time to post a reply, but please try to read the question before you do so in the future.  I had said that files imported from the same camera work correctly (i.e. the same file type/codec), so the problem is obviously not a codec issue.  Furthermore, .mov is the extension for the QuickTime File Format (http://en.wikipedia.org/wiki/.mov). 

  • Imovie not playing back video from one event

    Select vidoes in iMovie '09 won't play back for me.  All I get is a black box, no audio, no video.  The issue appears to be confined to videos from one particular event.  The preview shows up just fine, but no actual video. 
    The videos were taken and imported from the same Sony camera as the videos that do work.  They also play back fine in Quicktime.  The format is .mov.  Any ideas?

    Fixed the issue myself. Here's a step-by-step because I what found online pertaining to this issue were not clear on how to fix it.  (Note that this is what I did to fix the problems, some of the steps might not be strictly necessary.)
    How to get movies to start playing back again in iMovie '09: 
    1.) Close iMovie.
    2.) Delete contents of the "iMovie Cache" folder for the event that is not playing back correctly.
             - There are were two files "Cache.mov" and "Cache.plist", I deleted both.
    3.) Restart iMovie
    This appeared to force the program to generate new files and start working correctly.  From what I read on other postings it was probably caused by the program not closing properly, which I seem to recall it crashing on me or my wife a while ago.
    @ Bengt Wärleby
    I appreciate you taking the time to post a reply, but please try to read the question before you do so in the future.  I had said that files imported from the same camera work correctly (i.e. the same file type/codec), so the problem is obviously not a codec issue.  Furthermore, .mov is the extension for the QuickTime File Format (http://en.wikipedia.org/wiki/.mov). 

  • HELP....AVCHD / MPEG files not playing correctly!

    I have been trying to download video that was shot with the new Sony FS100 camera that I'm told are AVCHD or MPEG files to my older Adobe Premiere Pro 1.5 timeline, but they are not playing correctly. When I reverse the field dominance, the image plays better but the sound is strange (I was able to speed the sound to 450% and it worked better, but then the balance of the sound from the clip is lost somewhere.).
    Any suggestions to make these files play and work correctly? I tried converting them to AVI files but that showed up completely black on the timeline! Anything I've tried either affects the video or audio negatively!  I try either makes the image play or stutterThis was shot in regular SD format, NOT HD, so they should be able to play on  a standard timeline. Can anyone suggest anything to help please? Much appreciated!

    Thanks for your reply, I ran it through Media Info. Here are the results:
    Container & general information:
    MPEG-PS: 290 Mib  4min22s
    1 Video stream: MPEG video
    1 Audio stream: AC-3
    First Video Stream:
    8833 Kbps, 720*480 (4:3), at 29.970 fps, MPEG video (NTSC) (version 2) (Main@main) (Custom Matrix BVOP)
    First Audio Stream:
    256 Kpbs, 48.0 Khz, 16 bits, 2 channels, AC-3 (DVD-Video)
    Please let me know where to go from here. Thanks so much!
    Date: Fri, 11 Nov 2011 10:50:15 -0700
    From: [email protected]
    To: [email protected]
    Subject: HELP....AVCHD / MPEG files not playing correctly!
        Re: HELP....AVCHD / MPEG files not playing correctly!
        created by Ann Bens in Premiere Pro CS4 & Earlier - View the full discussion
    Welcome to the forum.A screendump of what these SD files exactly are would be very nice.Run them throught Media info.http://mediainfo.sourceforge.net/en
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4020725#4020725
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4020725#4020725. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Premiere Pro CS4 & Earlier by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Sound Does not Play Back

    I am playing recorded video from a Sony HDR-HC1 through the DV out and capturing in on location. All goes well(except for some red frame video) during capture, good video and audio. I captured three times. On one occasion the audio played back. The other two it did not. Audio will not play back in PP CS3. The file is an AVI T2. The same clips play back fine in Edius 3.6 with good sound.
    Any tips on what is wrong?
    Kent

    Hey There and Welcome to the mac forum!!!!
    Could it be possible that you moved or even trashed the audio files you were using? If so then they get trashed in imovie to.
    Next time, transform the movie into a Quicktime movie (once you are completely done the project). Once you have done this, you can move or even trash any of the elements of your movie (even the footage) but this will make your actual imovie project useless (The Quicktime one will be fine).
    I hope this helps,
    -Hooked

Maybe you are looking for