MPEG2 broken when upgrading to 7.0.2

Hello all,
I upgraded to QT7.0.2 and afterward OSX can not recognize ANY MPEG2 file. The file shows up in finder but there is no QT icon. In fact, if I try to open one up it crashes my finder. I am running Panther 10.3.9 - G5 Dual 2.0 - 2.5Gig RAM - Final cut studio - Compressor 2.
Any help would be great.

Hi,
I've not had a problem with MPEG2 playback but .AVI playback using Xvid video and AC3 audio codecs. This too would appear to be down to the iTunes 5/Quicktime 702 upgrade as nothing changed apart from this and I had just finished watching a movie then upgraded and then it didn't work.
After an hour on the phone to Apple an archive restore was recommended. I chose not to take that advice.
Would Apple admit that there's a problem with the OS X upgrade as they have with the x86 version for the PC?
Will we be expecting a new version?

Similar Messages

  • No sound in MPEG2 video after upgrading to QT 7.6.6

    I still have a problem with QT playing the sound of MPEG2 videos after upgrading to QT 7.6. I had this problem one year ago and solved it by downgrading to QT 7.5. Now I did the automatic update suggested by the system which insrtalled QT 7.6.6
    Unfortunately again no sound when playing MPEG2 videos (I have the MPEG2 QT component installed). When converting the video to MPEG1 or MP4 there are no problems at all. So it seems to be a problem of the MPEG2 component together with QT 7.6
    Any idea how I could solve this? Is the a MPEG2 component update which works with QT 7.6?
    Thanks for your help
    Wolfgang

    I downloaded the new MPEG2 component (unfortunately I had to pay the 20 EUR as my previous download has been in something liek 2008 and is no longer registered in the Apple Store
    Strange! I made my original pre-QT v6.4 MPEG-2 component purchase in September of 2002 and it was automatically updated to the version for QT 6.4 thru QT v7.5 which was then automatically updated for QT v7.6 and later. It would seem the European stores may operate differently than the US store. You may wish to hang onto you purchase information in case this ever happens again in order to discuss the matter with Customer Service or at least learn the specific terms/limitations of your purchase agreement and/or account.
    I hope this solves the problem but it seems most likely that the incompatibility of the old MPEG2 component and QT 7.6.x is the reason for my problem. You may be right
    I opened up the installer package after reading your latest post and noticed a statement that QT 7.6 is "required" for this update. So it looks like there were some compatibility issues with the change to QT v7.6 software.
    In any case, wish you the best of luck...

  • When upgrading to Lion from SL, is it possible to grow the partition?

    The partition in which Snow Leopard resides needs to be larger.  Is it possible when upgrading to Lion to make it bigger?  Is there another way to grow the Snow Leopard partition w/o migrating to Lion?

    You have 4-5 internal drive bays.
    Extra drive sleds are also sold so you can swap out drives (powered down of course, no hot swap).
    Lion creates a recovery partition - and if you install Lion to its own drive it will be fine, then Setup Assistant will run on first restart and import your files.
    There are a few more things to look out for on Mac Pro generally, software, drivers, and hardware.
    As for using 20%,  200GB, what some people do is move all the non OS/Apps items to a 2nd media/data/user account hard drive. 
    Limiting the OS to the outer 25% insures reduced seeks and that it uses the outer faster tracks.
    If you use RAID, that is another concern.
    Software RAID on Lion, Broken Functionality
    SuperDuper will optimize your folders and such, but it won't copy a recovery partition.
    How to keep Snow Leopard when upgrading to Lion
    How to prepare your Mac for OS X 10.7 Lion

  • Problems with pacman when upgrading to xorg7

    I decided to try and update from xorg-11R6.8 to 7 tonight, after hesitating for a while. I saw all the bug reports and problem threads, and I still can't understand why something that results in so many bugs has been released. It doesn't seem to comply with the KISS principle, either, but who am I to judge?
    Anyway, my problem is this:
    When I try to install the xorg components, I get the following message in my terminal. After checking the packe intergrities, it'll go to install the first package and then show this:
    load_pkg: missing package name in /var/cache/pacman/pkg/libxkbfile-1.0.1-1.pkg.tar.gz.
    After removing xorg-11R6.8, it will do this for any package I try to install, whether part of the new modular xorg or not.
    If I do a "pacman -U /var/cache/pacman/pkg/xorg-11R6.8.2-6.pkg.tar.gz", it works fine again.
    I've read through the Xorg7 wiki entry and there's no reference to this problem.
    Any way to solve it?
    Thanks in advance.

    That didn't really help, either.
    Apart from a fresh install, is there anything I can do to just sort out all these stupid problems in one go?
    When I try and upgrade to xorg7, I get all these messages about missing object files and libraries, complaints from /sbin/ldconfig about the nvidia module being empty, all this other crap too; it seems like a different thing broken every time. When I downgrade to xorg-6.8, fluxbox comes up and works, but when I go to upgrade anything else with pacman, I just get the load_pkg errors or whatever else.
    I've tried editing my /etc/X11/xorg.conf file to the new xorg7 paths when upgrading to xorg7, but it makes no difference.
    I don't understand how something that's supposed to simplify Arch could break things for so many people, =

  • Lost bootcamp capability when upgrading from OS X Mavericks to OS X Yosemite 10.10?

    When upgrading from OS X Mavericks to OS X Yosemite 10.10 while dual booting with Windows 7 on my bootcamp partition, I can't access the Windows partition any more. When I restart my computer and hold the alt key the only drives that are shown are my Mac OS X and Recovery (usually there is the bootcamp drive there too). Does anyone have any solutions? I can still access my windows 7 files from within my Mac partition weirdly enough. And if there aren't any solutions, is bootcamp broken on Yosemite? Is it safe to redo the process and put a fresh Windows 7 or Windows 8 partition back on bootcamp again? I'm not tech savvy enough to understand all of the coding components so if you want to walk me through it you can, or just provide a simple explanation, any help is grateful. Thanks for your help.

    Welcome To Discussions Dedesu!
    Here is some additional info.
    Tiger is available for purchase at The Apple Store (U.S.).
    If you know what to look for, a Full Retail Version, of the Panther Install CDs, or a Full Retail Version, of the Tiger Install DVD, can also be purchased rather inexpensively, at some additional online Apple retailers, like Amazon, FastMac, etc, and as posted, eBay.
    As also posted, be sure not to purchase grey, upgrade or machine specific CDs or DVDs. They will not work.
    Panther is only on CDs, not DVDs.
    Unless purchased from AppleRescue, the discs should look exactly like the images in the above links, and not say Upgrade, CPU Drop-in DVD, or "This software is part of a hardware bundle purchase - not to be sold seperately." on them.
    Additional info here Using OS X Install CDs/DVDs On Multiple Macs.
    Once Panther 10.3.x is installed, you can use the 10.3.9 Combo Update, to upgrade to the final version.
    If your Mac meets the Tiger System Requirements, you could also consider installing that, and then use the PPC 10.4.9 Combo Update, to upgrade to the current version.
    Panther Install & Upgrade Hints
    Additionally, "Tiger ships on a DVD, but if your Mac doesn’t have a built-in DVD-ROM player, you’ll need CD media."
    AppleRescue, also sells a Tiger installation set on CD.
    Shop Carefully, Examine All Documentation, And I Wish You Success!
    ali b

  • Resume from suspend broken after upgrade

    Hi, I'm having a hardware issue noone else seems to be having. I mean, I can't find any discussions or bug reports about it anywhere. :-(
    The specifics:
    Resume from suspend broke after an upgrade. X starts, windows appear, and I can move the cursor around, but everything else is frozen. The only way out is to hit C-A-F1 to switch to the virtual console and restart X or reboot.
    Please, any help will be greatly appreciated.
    I'm running:
    local/lib32-nouveau-dri 9.1.1-1
    extra/nouveau-dri 9.1.1-1
    extra/xf86-video-nouveau 1.0.7-1 (xorg-drivers xorg)
    local/linux-ck 3.8.6-1
    local/linux-ck-headers 3.8.6-1
    An extract of my Xorg.0.log during suspend/resume:
    [    43.750] (II) AIGLX: Suspending AIGLX clients for VT switch
    [    43.750] (II) NOUVEAU(0): NVLeaveVT is called.
    [    53.660] (II) AIGLX: Resuming AIGLX clients after VT switch
    [    53.660] (II) NOUVEAU(0): NVEnterVT is called.
    [    53.694] (II) NOUVEAU(0): EDID vendor "PHL", prod id 2151
    [    53.694] (II) NOUVEAU(0): Using hsync ranges from config file
    [    53.694] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [    53.694] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [    53.694] (II) NOUVEAU(0): Modeline "1920x1200"x0.0  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +hsync +vsync (74.0 kHz eP)
    [    53.694] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
    [    53.694] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
    [    53.694] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
    [    53.694] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
    [    53.694] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
    [    53.694] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
    [    53.694] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
    [    53.694] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [    53.694] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
    [    53.694] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
    [    53.694] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
    [    53.694] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
    [    53.694] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
    [    53.694] (II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
    [    53.694] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
    [    53.694] (II) NOUVEAU(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz e)
    [    53.694] (II) NOUVEAU(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [    53.694] (II) NOUVEAU(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz e)
    [    53.694] (II) NOUVEAU(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
    [    53.694] (II) NOUVEAU(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
    [    53.694] (II) NOUVEAU(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
    [    53.694] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [    53.694] (II) NOUVEAU(0): Modeline "1920x1200"x0.0  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +hsync -vsync (74.0 kHz e)
    [    60.180] (II) AIGLX: Suspending AIGLX clients for VT switch
    [    60.180] (II) NOUVEAU(0): NVLeaveVT is called.
    [   131.086] (II) evdev: Logitech USB Optical Mouse: Close
    [   131.087] (II) UnloadModule: "evdev"
    [   131.087] (II) evdev: Microsoft Wired Keyboard 400: Close
    [   131.087] (II) UnloadModule: "evdev"
    [   131.087] (II) evdev: Power Button: Close
    [   131.087] (II) UnloadModule: "evdev"
    [   131.087] (II) evdev: Power Button: Close
    [   131.087] (II) UnloadModule: "evdev"
    [   131.089] (II) NOUVEAU(0): Closed GPU channel 0
    [   131.092] Server terminated successfully (0). Closing log file.
    (looks error free)

    Thank you for your reply, pyther. I figured it was a kernel bug, too, but now I'm not so sure. Surprisingly, in Ubuntu 11.04 (which uses kernel 2.6.38), suspend works fine on my laptop. Figuring that perhaps this was due to an Ubuntu-specific patch, I tried booting the 2.6.38-8-generic kernel that ships with Ubuntu 11.04 on my Arch installation, but found that it was subject to the same issue described above, where the system fails to resume from suspend. I also tried disabling laptop-mode-tools, but to no avail.
    Clearly, the problem is related somewhat to the kernel, as in my Arch installation, suspend works fine in 2.6.36, is somewhat problematic in 2.6.37, and is completely broken in 2.6.38. Yet I don't think it's entirely due to the kernel, as suspend works fine in Ubuntu 11.04, but is broken when I boot my Arch installation with Ubuntu's kernel. Performing a bit bisect to determine the bad commit sounds like it might help, but given that suspend functionality seems to have gotten progressively worse for me since 2.6.36, I'm not sure how I would go about locating a specific commit that is the source of my issues. Is there anything else I might try?

  • How to transfer data & apps,When upgrading from a iPhone 3G to an iPhone 4 or soon 5

    When upgrading from a iPhone 3G to an iPhone 4 or soon 5
    How to transfer all phone number and apps and notes, pretty much copy my old iPhone to my new iPhone , all content and apps.
    Will it transfer my text messages also?
    Is this a nightmare or an easy task?

    Connect to iTunes and backup. Then when you receive the new phone restore from that backup.
    http://support.apple.com/kb/ht1766
    http://support.apple.com/kb/ht1414

  • Access denied when upgrade SharePoint app in on premise deployment while it succeeds in fresh deployment

    We deployed a SharePoint hosted app then used it for a while then we needed to upgrade it to be provider hosted app.
    we used the same AppID and name with the new package then uploaded the package to the app catalog.
    the old app in the site contents now has a note that there is a newer version and prompts to upgrade.
    the upgrade fails with access denied even for site collection administrator.
    is there really some permission issue or the upgrade can't be done?
    We are volunteers, if the reply help you mark it as your answer. thanks!!

    Hi,
    According to your post, my understanding is that you got access denied error when upgrade the SharePoint hosted app to provider hosted app.
    How did you upgrade a SharePoint hosted app to a provider hosted app?
    They are two different type apps, why not just create a new provider hosted app?
    To create a provider hosted app, we should create a certificate that is used as “security token issuer”.
    There are two articles about creating provider hosted  high trust app, you can have a look at them.
    http://blog.karstein-consulting.com/2013/01/08/create-provider-hosted-high-trust-app-for-sharepoint-2013-short-guide/
    http://msdn.microsoft.com/en-us/library/fp179901.aspx
    What’s more, there is an topic about the troubleshooting tips for SharePoint high trust app, you can refer to it.
    http://blogs.technet.com/b/speschka/archive/2012/11/01/more-troubleshooting-tips-for-high-trust-apps-on-sharepoint-2013.aspx
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Error 3194 when upgrading to ios 7.

    I receive error 3194 when upgrading to ios7 on my iphone 4 ( and I really don't know if it is 4s or just 4).  I am working though the itunes softward on my home computer.  It seems I am stuck in something called recovery mode.  I have tried a variety of suggestions found on the web (e.g., editing a "host" file, checking firewalls and connectivity, etc.) to no avail.  Any suggestions?

    The iPhone was either previously jailbroken (the DFU restore should have fixed that) or it has a hardware error. I would vote for the latter.

  • Receiving a -43 error message when upgrading to ios5.

    How do you get past error code -43  when upgrading to ios5 on ms vista??

    The only solution that I've found was here
    http://gizmodo.com/5849160/the-complete-guide-to-updating-to-ios-5&rct=j&sa=X&ei =bnaWTrPYKYekmQXR9_WFAg&sqi=2&ved=0CCoQ-AsoADAA&q=iphone+ios+5+error+-43+when+ba ckup&usg=AFQjCNGGVjsr_rky-tiplqdj-1fBfXofPA
    and here
    http://www.macworld.com/article/162925/2011/10/how_to_upgrade_your_ios_device_to _ios_5.html&rct=j&sa=X&ei=bnaWTrPYKYekmQXR9_WFAg&sqi=2&ved=0CC4Q-AsoATAA&q=iphon e+ios+5+error+-43+when+backup&usg=AFQjCNEBBPx-ymDJPGPd-sBy8TZ1dDTbeQ
    by:
    1. Doing backup.
    2. Using the Restore button and following the
    All works fine now and all the settings are there.
    BTW: it took over 2 hours to restre and that is with lots of apps and without songs, phothos and movies... that I removed before.Gizmo link above.

  • Why don't the ratings transfer when upgrading Lightroom to a new version? I no longer can sort using ratings--which took a lot of time to create.

    I have given many of my photos ratings, but the ratings don't come over when upgrading Lightroom to the newest version. Anything I can do to recreate my ratings?

    Press CTRL+SHIFT+DEL, change the top option to '''Everything '''and in the bottom menu, checkmark '''Cache '''(uncheck all the others). Then click '''Clear Now'''.
    Then go to '''Tools''' | '''Options '''| '''Advanced '''and in the Network tab | Offline Storage menu, click '''Clear Now'''.
    Then go to '''Tools '''| '''Options '''| '''Privacy''', click '''Show Cookies '''button and delete the cookies for lumosity.com.
    Then try again.

  • Error in "tempInit" when upgrading Flash MX AS2 FLA to Flash CS6 AS3 FLA

    I experienced a compiler error in "tempInit" when upgrading an AS2 project to AS3.  "tempInit" is something internal to Flash Authoring, because it doesn't exist in my project and other people have gotten the same error.
    I've read about this problem, and everyone thought it was because of an instance with a bad name, such as one that includes spaces or equals a keyword or something like that, and people have shot down the idea that the problem is with the library symbol, but I'm convinced now that it's a corrupted library symbol.  Here's why:
    I had 8 instances of a particular movie clip on stage, each on a different frame.
    When I deleted the symbol from the library, the compiler error went away (but so did my stage instances).  So that simply tells me that the problem is with that particular clip (I originally had to delete each clip in my library one at a time and recompile to determine the offending clip), but that obviously didn't rule out the name problem since the stage instances get removed when I deleted the corresponding library symbol.  Still, I knew it couldn't be a name problem, because all instances had a valid name "mainidea".
    I ruled out the name problem by creating a new library symbol identical to the first (it's just a few text fields with a rectangle drawn around them).  Without changing the names of the existing instances on stage, I used the "swap" button to swap in the new library symbol.  The use count on the old one dropped to zero, and the use count on the new one went up to 8.  The compiler error was gone, and it only went away once the use count for the old symbol was zero.
    The old and new library symbols are identical as far as I can see.  Same child objects at the same positions, same textfield content, same child instance names, no ActionScript code, etc.  Since there was no discernible difference, I came to the conclusion that the original library symbols had somehow been corrupted under the hood, somewhere in the pipeline between opening an old Flash MX file and setting the flash player version to 11.4 and selecting AS3 as the script language.  Somewhere in that process, the Flash Authoring environment screwed something up.  Does anyone know anything about this problem?
    I have hundreds of files I need to upgrade, and that symbol was copied to each of them as they were created years ago, and I think I'm going to experience this problem with all of them.  It's time-consuming to duplicate the old symbol and replace all the instances for every single file, so I'm trying to find the source of the problem and a workaround to avoid it.

    It works, but slowly as if somer AS1 code is interpreted into
    very
    ineffective machine code by AS2 interpretor
    My question was if it is know which particular AS1 features
    have these
    problems in AS2
    "ggshow" <[email protected]>
    ÓÏÏÂÝÉÌ/ÓÏÏÂÝÉÌÁ
    × ÎÏ×ÏÓÔÑÈ
    ÓÌÅÄÕÀÝÅÅ:
    news:f17r79$efu$[email protected]..
    > some AS1 not working when the movie run in AS2...
    > if you want to publish it as AS2, then write it in AS2.
    >
    > * it is time to learn AS3
    >

  • Hard Drive warning when upgrading to Mountain Lion. 2 try and I was able to upgrade. Software update for IPhoto, had problems restarting. Do I need my hard drive checked

    Hard Drive warning when upgrading to Mountain Lion. 2nd try and I was able to upgrade. Software update for IPhoto, had problems restarting. Do I need my hard drive checked

    Yes.
    Choose Apple menu > Restart. Hold down the Command (⌘) and R keys as your computer restarts.
    When you see a white screen with an Apple logo in the middle, you can release the keys.
    Click Disk Utility, and then click Continue.
    In the list at the left, select the item you want to repair. (Be sure to select an item that’s indented to the right in the list, not an item at the far left.)
    Click First Aid.
    If Disk Utility tells you the disk is about to fail, back it up and replace it. You can’t repair it.
    Click Repair Disk.
    If Disk Utility reports that the disk appears to be OK or has been repaired, you’re done.
    Otherwise, you may need to do one of the following steps.
    If Disk Utility can’t repair your disk or it reports “The underlying task reported failure,” try to repair the disk or partition again. If that doesn’t work, back up as much of your data as possible, reformat the disk, reinstall Mac OS X, and then restore your backed-up data.
    If you continue to have problems with your disk, it may be physically damaged and need to be replaced

  • I lost my Visual Voicemail when upgrading to iphone 5. New phone was set up from itunes backup of iphone4 but my Mac tells me there is an iCloud back up of my phone prior to this date. Will my Vis Voicemail be on this and can I get it on my new phone?

    I lost my Visual Voicemail when upgrading to iphone 5. New phone was set up from itunes backup of iphone4 but my Mac tells me there is an iCloud back up of my phone prior to this date. Will my Vis Voicemail be on this and can I get it on my new phone?

    I see.  Apple's documentation on what is included in the iCloud backup doesn't explicitly say that it contains voicemails, but that doesn't mean it does not.  You would just have to try restoring the backup to find out. 
    To restore to your iCoud backup you have to start by erasing the phone.  Go to Settings>General>Reset and tap Erase All Content and Settings.  Then go through the setup screens on the phone and when given the option, choose Restore from iCloud backup.  You will then sign into your iCloud account, accept the terms and conditions, then choose the backup you wish to restore from.  To see an older backup, you may need to tap "Show older backups" (see image below).  Be sure your phone is connected to wifi and your charger as this may take some time to finish.
    If this does not recover your voicemails, you can check to see if you have an older iTunes backup that may contain them.  Available backups are shown in iTunes Preferences>Devices on the Backups list.
    If all else fails, you could try contacting your carrier.  Voicemail is a carrier feature and they may have an archive you could access.

  • XMP data not showing up in the custom file info panels when upgraded to CC

    For several versions of Photoshop, I have been able to use a modified custom file info panel to input, update, and track psd files. With each version of photoshop there are always some changes in the way the object data is handled. The lastest challenge is:
    1. XMP data not showing up in the custom file info panels when upgraded CC from CS6.
    2. Raw data is not visible in CC in the File info panel.
    3. This occurs in new documents where we create the xmp wrapper while the file template is built.
    4. When metadata is manually entered into the file, the data is not added to the XMP wrapper when it is recreated on the save.
    5. When a file that was created in CS6 is opened that contains the Metadata in the file info template. It is visible. the Raw data is also visible. Once the XMP wrapper is recreated - write and then close. The data is no longer available. the Raw data will not pull up in the file info panel.
    Any feedback or a direction will be appreciated.

    I have a script that the user runs to input xmp data into a Customized version of the generic file info panel. it is data that is gathered from the user when the psd file is created. once the file is open in photoshop. the information is visible in the File info panel , the raw data, and as a schema addition in the advanced tab.
    in CC the nodes and the children of the XMP packet have changed positions. so that the XML -this.XMP.child(0).appendChild(this.createNode())
    is no longer the node that can be appended.
    Where XML.child(0).elements().length(); would enable the xmlns to be added in CS6
    <rdf:Description xmlns:phsa="' + this.namespace + '" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:x="adobe:ns:meta/" rdf:about="" />'
    it is visible in CC as namespace in a different arrangement. XML.child(0).child(0).namespaceDeclarations().toString()) and the children are  XML.child(0).child(0).elements().length().toString()); There are now 7 child nodes where before there were 1.
    with all shifted, the initialize of the values and the delete XMP packet wrapper and create new or the amend to the XMP packet wrapper is undefined.

Maybe you are looking for