Mplayer doesn't seem to want to play anything...

Whenever I try to run mplayer, I get the following error:
MPEG-PS file format detected.
VIDEO: MPEG1 352x240 (aspect 12) 24.000 fps 480.0 kbps (60.0 kbyte/s)
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
MP3lib: init layer2&3 finished, tables done
AUDIO: 44100 Hz, 2 ch, 16 bit (0x10), ratio: 12000->176400 (96.0 kbit)
Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
vo: X11 running at 1280x1024 with depth 24 and 32 bpp (":0.0" => local display)
Disabling DPMS
==========================================================================
Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough
VDec: vo config request - 352 x 240 (preferred csp: Mpeg PES)
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
The selected video_out device is incompatible with this codec.
VDecoder init failed :(
Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder libmpeg2-v0.3.1
Selected video codec: [mpeg12] vfm:libmpeg2 (MPEG 1 or 2 (libmpeg2))
==========================================================================
Checking audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 44100 hz, little endian signed int
AF_pre: 44100Hz 2ch Signed 16-bit (Little-Endian)
AO: [oss] 44100Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
Starting playback...
VDec: vo config request - 352 x 240 (preferred csp: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
VO: [xv] 352x240 => 352x264 Planar YV12
X11 error: BadAlloc (insufficient resources for operation) 0.0% 0 0 0%
MPlayer interrupted by signal 6 in module: flip_page
- MPlayer crashed. This shouldn't happen.
It can be a bug in the MPlayer code _or_ in your drivers _or_ in your
gcc version. If you think it's MPlayer's fault, please read
DOCS/HTML/en/bugreports.html and follow the instructions there. We can't and
won't help unless you provide this information when reporting a possible bug.
Successfully enabled DPMS
X11 error: BadValue (integer parameter out of range for operation)
I am running fluxbox with a gig of memory - any ideas what could cause this?
Edit: also running xorg and using an ATI 9800 video card, although I've had mplayer running on this before...

I dont have ati card and I'm not using fluxbox but just an idea found with google: http://sourceforge.net/mailarchive/foru … um_id=2754
If it's not your case try other suggestions http://www.google.com/search?q=mplayer+ … 8&oe=utf-8

Similar Messages

I tried to manually clear my Time Machine back up drive (a La Cie). But now the Trash is filled with files (over 130,000) and it doesn't seem to want to trash them - how do I get rid of them now in a quicker way?

I tried to manually clear my Time Machine back up drive (a La Cie) of some of the older backups. But now the Trash is filled with files (over 130,000) and it doesn't seem to want to trash them - it's taking forever!! how do I get rid of them now in a quicker way?

dear Sue
i've tried the alt solution to empty trash but it does not work
I still got the -8003 error
for emptying time machine backups that i foolishly put in the trash
i've also tried this solution using terminal and it did not work either
http://www.imore.com/how-force-empty-trash-your-mac-using-terminal
any help you might offer would be greatly appreciated
i am using a 24 inch iMac
OSX 10.6.8
Message was edited by: summer_laughter

I have just purchased Logic Pro X and it doesn't seem to want to work with my Tascam us-122L sound card. Do i need to purchase a new one and if so, any advice on a reasonable priced one?

I have just purchased Logic Pro X and it doesn't seem to want to work with my Tascam us-122L sound card. Do i need to purchase a new one and if so, any advice on a reasonable priced one?

What OS do you have? Have you tried the latest drivers?
http://tascam.com/product/us-122l/downloads/
alternatives: Focusrite Scarlett 2i2, Presonus Audiobox.

The iPad doesn't seem to want to set up an email for a "group" in my contacts. On my iMac, when I type the name of a group, the email addresses of everyone in the group appear in the "To" line of a new message. Not so with the iPad. Help?

The iPad doesn't seem to want to set up an email for a "group" in my Contacts. When I type the name of a group in the "To:" line of a new message on my iMac, all the email addresses of the group automatically appear. Not so with my iPad. Help?

Apparently Groups are not supported in the Mail App on the iPad. Read this thread and see Michael Morgan's post for a workaround.
https://discussions.apple.com/message/13084823#13084823

10.1 doesn't seem to want to create proxy media

Now 10.1 doesn't seem to want to create proxying media.
Is this new?.
Will it ever create proxy media.?
Or is that only for like 4K cameras?
I used to create proxy media for everything I shot which is 1080.

My two Canon Vixias shoot AVCHD and my Canon DSLR shoots in .mov format.
I usually import all that I'm going to edit and then choose create proxy media.
10.1 did not create proxy media nor does it seem to when I ask it too.
Maybe with improvements, it doesn't feel a need, but before working in proxy improved the editing process and I'd just switch back to optimized media for output.

I just downloaded 11 onto my mac but it doesn't seem to want to install. Any reason why this would be?

I just downloaded 11 onto my mac but it doesn't seem to want to install. Any reason why this would be?
Downloading should be fairly easy and the installer opens but nothing seems to happen after that.
Help please!

What link, website? Firefox should not do that. Did you get FF from '''Mozilla.org?'''
It could be the work of one of your add-ons, or even add / mal-ware.
Look thru your add-ons list and make sure you know what each one is
there for. Also, check the programs that are on your computer
'''Windows > Start > Control Panel > Uninstall Programs.'''
'''(Mac: Open the "Applications" folder)'''
Go thru the list and use a web search to check any that you don't
know what they are.
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-caused-malware Troubleshoot Firefox Issues Caused By Malware]''''' {web link}

X-Fi DD-DTS doesn't seem to work right playing DVD Movies with VLC Player or anything els

I have an X-Fi Platinum with the bay and When I try to Play a DVD with VLC Player And choose a/52 over s/pdif it sounds HORRID skipping and pausing and not functioning at all.. I must choose 5. channel to have Listenable Audio. The Same goes for AC3 Encoded Files If I chose A/52 over S/PDIF in VLC player it sounds like **bleep** and doesn't seem to decode it right. I must chose stereo 2 channel to listen to AC3 encoded video's.. NOTE The dolby Digital symbol DOES appear when i chose A/52 over S/PDIF so it does know it's a digital signal.. And I have the software set to USE hardware decoder and S/PDIF in Decode selected. NOW Here's something that REALLY makes me wonder wtf is wrong, I can connect my Home DVD Player or Cable Box over the Optical?in OR the S/PDIF in and the SOB works Fine, The Dolby Digital symbol comes up and everything sounds great! I get Dolby Digital surround no problem..Why in the heck does it not want to play DVD's using the A/52 over S/PDIF or any AC3 Encoded Files?What's the deal?And I am using windows XP Pro SP2 yadda yadda yadda?Message Edited by mbrown0420 on 07-25-20070:58 PM
Message Edited by mbrown0420 on 07-25-20070:58 PM

Only with VLC?
Same problem with PowerDVD, WinDVD?
VLC media player Forum:
http://forum.videolan.org/viewforum.php?f=4
Unplayable DTS/Dolby Output via A/52 over S/PDIF (Videolan forum)
http://forum.videolan.org/viewtopic....d=a&view=print
"In the preferences menu: (tab) Audio > Output modules > (check the "advanced options" box) choose "Win32 waveOut extension output" from the drop-list, save and restart VLC (by CloudStalker)"
http://lh3.google.es/rmorinr/Rqhsqp7cvhI/AAAAAAAAAfM/qtzo3E8-sQQ/s44/VLC_DTS_Options.JPG">
Message Edited by Rad-Wulf on 07-26-20070:47 AM

A little lost here, view doesn't seem to want to show up

Hi,
First of all, let me say that i am not a iPhone or Mac developper although i'm a super good programmer that knows lots of languages (c/c++, java, c#, php, vb, vb.net, etc)
I was tasked to add a screen to an iphone app that asks for user acceptance of terms and then store the acceptance into the phone. I'm not even at the storage part yet, i'm all lost in that objective C thing... What kind of programming language is that... lol
Anyway, i tried my best and am able to open a view that was already existant in the system as the application starts. The same view, i duplicated it and renamed all its files, identifiers in the .h and .m file to a new name. I scoured the source code of the app to add the different variables or properties just as the previous view had been added to the app.
Compile, works, view never shows up... maybe i messed up something, try the older view i tried at first, still works... strange.
Here is a bit of code:
- (void)applicationDidFinishLaunching:(UIApplication *)application {
[window addSubView:agreementView.view];
[window makeKeyAndVisible];
This portion of code doesn't work, but if i change "agreementView" for "hmView" it works fine and shows the view called HmView. The app compiles completly and works in all cases, its just the agreementView that never shows up.
Can you help me with this at all? Do i need to post anything else. Please keep in mind that i thought it would be super simple to do this and finaly, it's taken me 3h already to simply create a view and recompile the code.

CDGI Developper wrote:
this application is already multiview. I'm just trying to add a view in the code that shows an agreement ppl have to accept.
Ok, understood. It's sounding more and more like a modal view would be the best solution.
If i use the variable name of another view that was working, it loads up fine as the application starts.
Although you mentioned creating another view, it seems likely you didn't actually do so, or that the variable you assigned to the new view doesn't actually point to that view. You haven't mentioned Interface Builder yet. IB is the resource editor for Xcode, and is usually where Cocoa developers start when creating a new view (though new views can certainly be created in code without using IB).
Since you've been focusing on the root view so far (i.e., the view which is added directly to the window in applicationDidFinishLaunching), can we assume that you want the "agreement view" to be reached directly from the root view? Or, do you want agreementView to replace the current root view at start up? For example, do you want agreementView to be the gateway to the app, like a login screen, so that none of the app's functionality can be accessed until the agreement is accepted?
Once we know exactly how the agreement fits into the view hierarchy, it might be easy to walk you through the steps needed to create it, display it, and dismiss it. Another question that might help clarify your requirements: Could you use an "alert view" instead of a new, full-screen view for your purpose? An instance of the UIAlertView class is used just like a Windows "MessageBox" to display a message and wait for the user to respond. So an alert view would be good for obtaining a "yes" or "no" answer from the user. Of course, if the agreement screen needs to present the text of an agreement, much like the contract presented during an app installation, I guess you'd need a new full-screen view.
... if i use the new view i have created (from a copy of the one that works) and i adapt all the identifiers in the different copied files, then the app still compiles, but the reference to the view variable doesn't seem to work.
Here's an example of how to bring up a modal view that covers the root view at startup:
- (void)applicationDidFinishLaunching:(UIApplication *)application {
// add the root view to the window
[window addSubview:viewController.view];
// make a new view controller
// (this also makes a default view for the new controller)
UIViewController *myController = [[UIViewController alloc] init];
myController.view.backgroundColor = [UIColor blueColor];
// set the modal transition style of the new controller
myController.modalTransitionStyle = UIModalTransitionStyleCoverVertical;
// add a text view object to the new view
UITextView *myTextView = [[UITextView alloc]
initWithFrame:CGRectMake(36, 50, 248, 228)];
myTextView.editable = NO;
myTextView.showsVerticalScrollIndicator = YES;
[myController.view addSubview:myTextView];
[myTextView release];
// add something legal to the text view
NSString *legalText = [NSString string];
for (int i = 0; i < 40; i++)
legalText = [legalText
stringByAppendingString:@"Whereas, henceforth and notwithstanding.
myTextView.text = legalText;
// add a button to the new view
UIButton *myButton = [UIButton buttonWithType:UIButtonTypeRoundedRect];
myButton.frame = CGRectMake(124, 320, 72, 37);
[myButton setTitle:@"Agree" forState:UIControlStateNormal];
[myController.view addSubview:myButton];
// connect the action of the button to a method in this file
[myButton addTarget:self action:@selector(dismissAgreement)
forControlEvents:UIControlEventTouchUpInside];
// bring up the modal view as a child of the root view
[viewController presentModalViewController:myController animated:NO];
[myController release];
[window makeKeyAndVisible];
- (IBAction)dismissAgreement {
[viewController dismissModalViewControllerAnimated:YES];
To see how the example works, remove the current version of applicationDidFinishLaunching from the app delegate .m file, replace it with the two methods above, save the file and click Build and Go. The example is working, tested code which doesn't require any work in Interface Builder. Be sure to cut and paste directly from the forum to the source file. At this point you don't need to lose a day or two tracking down a syntax error.
- Ray

Sallie Mae doesn't seem to want to grow with me. Anybody else have this problem?

I have had my Sallie Mae card since January. They gave me a startiing limit of $500. I have done a credit limit increase request and was offered $300. I felt insulted so I declined lol. I don't understand why they aren't offering a more reasonable increase. I am below 10% utilization on all my cards with many having a 0 balance. I have no new credit lines, no new inquiries. With the limits I have on other cards, I just don't get it. I am thinking of just closing the card rather than wasting another hard pull. If I am going to do a hard pull, I would rather it be on a new card with someone else. Any opinions or ideas?

bengalikejenga wrote:
fordguy89 wrote:
Barclays is like Chase I've read that they combine limits pretty easily. If you are low inquries try for the nfl. They gave me 5k SL when others gave 1500. I would love to open a Sallie Mae and do this but I burned a lot of inquiries.i think Fordguy is right.... you might be better off opening another Barclays card that you mind like but not really need, and combine the limits to get a good push on your Sallie Mae Credit card.... you profile seems like it could support it. I need to get my mind checked out or something. ^^^^ This kind of stuff seems to really bother me and I can't figure out why. I know one could rationalize it as playing the game....but I am sorry...there aint a person in this world that should have to open another account with the same dang bank, combine limits, strictly for a larger CL. That is ridiculous. This should not have to happen. I would give this crazy card one last hoorah. I would use it for almost everything, pay that sucker off multiple times per week, and do this for 2 months, maybe 3. Then if they wont raise you, then just use it strictly for the rewards and only use it for gas/groceries/amazon. Leave it in your glove box. I get that OP has a limit of 10k with amex and this seems small...that would be very frustrating to me too. I gotta say tho, I have NEVER been a fan of anything barclay until I discovered their ring. They cap their rewards WAY WAY WAY too low, the card is geared for students and maybe some more frugal spenders. I dunno I get better deals with gas gift cards and my other cards so I don't have a need for it. That ring tho, the ability to go get cash and deal with moving it around later, for a buck, that is crazy awesome! I would try to keep this card a little longer and change it to the ring once your limit is higher. But thats just me.

Mac doesn't seem to want to be turned off

Processor 2 x 2.66 GHz Dual-Core Intel Xeon
Memory 3 GB 667 MHz DDR2 FB-DIMM
Mac OS X 10.5.5
I've had my Mac Pro for 1,5 years now and I never really had any issues with it. But the last few days it's behaving strangly.
- When I try to turn off the computer, it doesn't respond.
- When I try to turn it off with the power button it goes to sleep in stead of turning off.
- When, this morning, I finally could turn it off with the power button, when I turned it on again, I got the message in the little black/transparant window: Please turn off your computer using the power button (or something similar).
- Also, (and this is happening for a few weeks now) when I try to turn it off, it looks like it's switched off, but it's just the screen getting black, and nothing responds anymore.
Anyone know what could be the cause?

I have had my computer for 1,5 years now, I know it will only shut down when I hold the button for a long time
And yes, the problem was that it didn't shut down from the apple menu shut down option. I'm sorry if I wasn't clear about that.
Message was edited by: Eleonora.
Message was edited by: Eleonora.

Macbook doesn't seem to want to clear cache

So I have a client who has a Macbook and while we reset a font on our webpage for her it is stuck showing up as the old font. She cleared her cache, tried both Safari and Firefox to no luck. The same model macbook in our office shows the new font perfectly as does a MacBookPro and a windows machine. We assume it has to be something with her computer. We do not, however, have access to her actual machine. I want to give her more suggestions but am not sure what else to try...

Have you just cleared the browser cache... or have you cleared the font cache as well.
The free application Maintenance can quickly do this for you:
http://www.macupdate.com/info.php/id/16790
FontNuke will also work:
http://www.jamapi.com/pr/fn/

HT4623 My iPad doesn't seem to want to update to iOS 6. It keeps telling me I am up to date with iOS 5.1.1. What should I do?

My iPad keeps telling me that I am up to date with iOS 5.1.1. What do I need to do to download and install iOS 6?

You appear to have a first generation iPad, which isn't capable of running iOS 6. To tell for certain, append the last three characters of its serial number to http://www.everymac.com/ultimate-mac-lookup/?search_keywords= and load the page.
(87210)

My iPad doesn't seem to want to come on.

I was able to plug it into my macbook and it show up in iTunes so that I could transfer apps and other things. I tried restoring it but nothing. Help!

Did you try reset, recover or restore?
Allan

Update 7.1.2 does not install after downloading for around an hour. Wifi on, back up done, have space for update, turned off and on once completed but still doesn't seem to want to install. Help!

UPdate to 7.1.2 not installing

iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can’t update or restore your iOS device
http://support.apple.com/kb/ht1808
iPad Stuck in Recovery Mode after Update
http://www.transfer-iphone-recovery.com/ipad-stuck-in-recovery-mode-after-update .html
iOS: Apple logo with progress bar after updating or restoring from backup
http://support.apple.com/kb/TS3681
 Cheers, Tom

5.5 Mobile Applications Android emulator Doesn't seem to want to work!

Using Dreamweaver 5.5 and the new Mobile Applications I'm successfully set up the Android SDK (which was a right pain in the backside) - so now I can build the HTML5 structure and the 'PhoneGap' tools are there, my problem comes when exporting the application for build and testing.
When I start the build and emulate it pops up with a message stating 'unable to open in the emulator and to look in the build log for details'. So I do thia and find the following:
DERROR: Cannot copy phonegap files. Terminating.java.io.FileNotFoundException: (path to app here - removed for NDA reasons)\DefaultActivity.java (The system cannot find the path specified)
ERROR: Clone failed
and
Waiting for Android emulator to bootERROR: failed to launch Android emulator
No I've also tried to lauch the Android emulators via the Virtual device manager but it comes back with this error:
PANIC: Could not open: C:\Users\c554\.android/avd/AP4.ini
Now to me it looks like it;s trying to reference the emulator with the wrong path - but I'm not sure on how to go about finding or even changing this.....
So can anyone point me in the right direction so that I can get my applications fully running in Dreamweaver 5.5?
Thanks

Step1: You can run emulator android apps. it well error
Step2: You keep you keep running the emulator, then again you debug
I also encountered this error and now understand that to debug.
wish you success

Mplayer doesn't seem to want to play anything...

Similar Messages

Maybe you are looking for