MR11 : error CKMLGRIR013 for a po of a material UNBW

Dear.
I try to run MR11 for a purchase order with goods receipt of a material UNBW.
The system send this error message when I try to post clearing.
Error during reading of material ... or material locked
Message no. CKMLGRIR013
Can you help me ?
Thanks.

Hi,
check SAP Note:-
Note 1145489 - MR11: Error handling in background processing
Regards
Kailas Ugale

Similar Messages

MR11 - Error Message C+171

Iam trying MR11 and getting following Error message. Material Ledger is active in our system.
Any idea what could be the reason..
Message no. C+ 171
Error while determining the currency types for XXXXXX XXX
Note - XX...   = PO number.

If you have material ledger active and setup a plant with out running CKMSTART, MR11 will read table CKMLV " Material Ledger Control Record " table and not find an entry for that plant.
Since text base PO does not have a material, it was not bothered by the material ledger during GR.    With MR11 it found the material ledger was active (even though it was a text base PO) but missing the plant. It then gets sy-subrc exception condition and returns the C+171 currency error.
If you have Material ledger active run ckmstart in test mode and see if it is setup first, if not run it and the error message should go away.
( Note:material ledger can not be deactivated once turned on and can really change how MM records are processed.   Please refer to OSS notes on the subject ). If material ledger is not active << STAY AWAY FROM IT >>, then you need to look elsewhere.

How to create a error message for Deleted batch while creating a PO

Hi ,
Can any body tell me how to create error message for a deleted batch while creating a PO in ME21n,
when a PO is created for a deleted batch at GI &GR lebel it is showing a error message,
but i want to show a error message while doing the PO creation.
Thanks,
Sachhi

in badi me_process_po_cust u can put this message
METHOD if_ex_me_process_po_cust~check.

Error BACKINT for Oracle Connection

hi @ maxdb gurus...
i have a problem backing up my maxdb 7.6.0.033 (serving for a mysap.erp2005 on aix 5.3) using the backint mechanism.
-> backup media created: two pipes and one parallel medium containing these pipes
-> bsi.env has been created
-> backint4sapdb.sar contains
   4 staging areas each with 4096 MB
   files per backint call 2
-> maxdb is about 57 gb perm. data area (and 6 gb temp.)
i use the backup wizard (dbmgui) to invoke a complete data backup which starts (pipes are created in the file system) and runs until approx. 4 gb...then the backup terminates with error "-24920 backup operation was unsuccesful. The database request failed with error -8020"
what might be the problem? are the staging areas too small? is says that when using only one stage area it must hold the complete database...can i then conclude that 4 staging areas must hold the database as well - meaning they must be around 15 gb each?
GreetZ, AH

yup...but that also means that the sum of the staging areas need as much space as the database ie. around 70 gigs netto! the staging files will be filled and thus grow until the defined size, meaning that the file system(s) need to be big enough!
everything works fine until the stage files are filled (up to the defined size) and then stops...when i change the sizes of the staging areas i can reproduce the error!
i compared the tsm implementation of that system with another system (live cache...kind of small regarding db size...) and found nothing serious...
-> dbm.ebp (AIX 5.3, MaxDB 7.6.0.033, ERP2005, TSM 5.3.3.0)
2006-11-09 13:56:50
Using environment variable 'TEMP' with value '' as directory for temporary files and pipes.
Using environment variable 'TMP' with value '' as directory for temporary files and pipes.
Using connection to Backint for MaxDB Interface.
2006-11-09 13:56:50
Checking existence and configuration of Backint for MaxDB.
    Using configuration variable 'BSI_ENV' = '/sapdb/data/wrk/TDV/bsi.env' as path of the configuration file of Backint for MaxDB.
    Setting environment variable 'BSI_ENV' for the path of the configuration file of Backint for MaxDB from '/sapdba/data/wrk/TDV/bsi.env' to configuration value '/sapdb/data/wrk/TDV/bsi.env'.
    Reading the Backint for MaxDB configuration file '/sapdb/data/wrk/TDV/bsi.env'.
        The following line of the Backint for MaxDB configuration file does not start with a proper keyword and is ignored:
        The following line of the Backint for MaxDB configuration file does not start with a proper keyword and is ignored:
        The following line of the Backint for MaxDB configuration file does not start with a proper keyword and is ignored:
        The following line of the Backint for MaxDB configuration file does not start with a proper keyword and is ignored:
        Found keyword 'BACKINT' with value '/sapdb/TDV/db/bin/backint'.
        The following line of the Backint for MaxDB configuration file does not start with a proper keyword and is ignored:
        Found keyword 'INPUT' with value '/sapdb/TDV/backup/backint4sapdb.in'.
        Found keyword 'OUTPUT' with value '/sapdb/TDV/backup/backint4sapdb.out'.
        Found keyword 'ERROROUTPUT' with value '/sapdb/TDV/backup/backint4sapdb.err'.
        The following line of the Backint for MaxDB configuration file does not start with a proper keyword and is ignored:
        Found keyword 'PARAMETERFILE' with value '/sapdb/data/wrk/TDV/backint4sapdb.par'.
        Found keyword 'TIMEOUT_SUCCESS' with value '6000'.
        Found keyword 'TIMEOUT_FAILURE' with value '300'.
    Finished reading of the Backint for MaxDB configuration file.
    Using '/sapdb/TDV/db/bin/backint' as Backint for MaxDB program.
    Using '/sapdb/TDV/backup/backint4sapdb.in' as input file for Backint for MaxDB.
    Using '/sapdb/TDV/backup/backint4sapdb.out' as output file for Backint for MaxDB.
    Using '/sapdb/TDV/backup/backint4sapdb.err' as error output file for Backint for MaxDB.
    Using '/sapdb/data/wrk/TDV/backint4sapdb.par' as parameter file for Backint for MaxDB.
    Using '6000' seconds as timeout for Backint for MaxDB in the case of success.
    Using '300' seconds as timeout for Backint for MaxDB in the case of failure.
    Using '/sapdb/data/wrk/TDV/dbm.knl' as backup history of a database to migrate.
    Using '/sapdb/data/wrk/TDV/dbm.ebf' as external backup history of a database to migrate.
    Checking availability of backups using backint's inquire function.
Check passed successful.
2006-11-09 13:56:50
Checking medium.
Check passed successfully.
2006-11-09 13:56:50
Preparing backup.
    Setting environment variable 'BI_CALLER' to value 'DBMSRV'.
    Setting environment variable 'BI_REQUEST' to value 'NEW'.
    Setting environment variable 'BI_BACKUP' to value 'FULL'.
    Constructed Backint for MaxDB call '/sapdb/TDV/db/bin/backint -u TDV -f backup -t file -p /sapdb/data/wrk/TDV/backint4sapdb.par -i /sapdb/TDV/backup/backint4sapdb.in -c'.
    Created temporary file '/sapdb/TDV/backup/backint4sapdb.out' as output for Backint for MaxDB.
    Created temporary file '/sapdb/TDV/backup/backint4sapdb.err' as error output for Backint for MaxDB.
    Writing '/sapdb/TDV/backup/back-tdv-data-m10.pipe #PIPE' to the input file.
    Writing '/sapdb/TDV/backup/back-tdv-data-m11.pipe #PIPE' to the input file.
Prepare passed successfully.
2006-11-09 13:56:51
Creating pipes for data transfer.
    Creating pipe '/sapdb/TDV/backup/back-tdv-data-m10.pipe' ... Done.
    Creating pipe '/sapdb/TDV/backup/back-tdv-data-m11.pipe' ... Done.
All data transfer pipes have been created.
2006-11-09 13:56:51
Starting database action for the backup.
    Requesting 'SAVE DATA QUICK TO '/sapdb/TDV/backup/back-tdv-data-m10.pipe' PIPE,'/sapdb/TDV/backup/back-tdv-data-m11.pipe' PIPE BLOCKSIZE 8 NO CHECKPOINT MEDIANAME 'BACK-TDV-DATA-G1'' from db-kernel.
The database is working on the request.
2006-11-09 13:56:51
Waiting until database has prepared the backup.
    Asking for state of database.
    2006-11-09 13:56:51 Database is still preparing the backup.
    Waiting 1 second ... Done.
    Asking for state of database.
    2006-11-09 13:56:52 Database is still preparing the backup.
    Waiting 2 seconds ... Done.
    Asking for state of database.
    2006-11-09 13:56:54 Database is still preparing the backup.
    Waiting 3 seconds ... Done.
    Asking for state of database.
    2006-11-09 13:56:57 Database is still preparing the backup.
    Waiting 4 seconds ... Done.
    Asking for state of database.
    2006-11-09 13:57:01 Database is still preparing the backup.
    Waiting 5 seconds ... Done.
    Asking for state of database.
    2006-11-09 13:57:06 Database has finished preparation of the backup.
The database has prepared the backup successfully.
2006-11-09 13:57:06
Starting Backint for MaxDB.
    Starting Backint for MaxDB process '/sapdb/TDV/db/bin/backint -u TDV -f backup -t file -p /sapdb/data/wrk/TDV/backint4sapdb.par -i /sapdb/TDV/backup/backint4sapdb.in -c >>/sapdb/TDV/backup/backint4sapdb.out 2>>/sapdb/TDV/backup/backint4sapdb.err'.
    Process was started successfully.
Backint for MaxDB has been started successfully.
2006-11-09 13:57:06
Waiting for end of the backup operation.
    2006-11-09 13:57:06 The backup tool is running.
    2006-11-09 13:57:06 The database is working on the request.
    2006-11-09 13:57:11 The backup tool is running.
    2006-11-09 13:57:11 The database is working on the request.
    2006-11-09 13:57:21 The backup tool is running.
    2006-11-09 13:57:21 The database is working on the request.
    2006-11-09 13:57:36 The backup tool is running.
    2006-11-09 13:57:36 The database is working on the request.
    2006-11-09 13:57:56 The backup tool is running.
    2006-11-09 13:57:56 The database is working on the request.
    2006-11-09 13:58:21 The backup tool is running.
    2006-11-09 13:58:21 The database is working on the request.
    2006-11-09 13:58:51 The backup tool is running.
    2006-11-09 13:58:51 The database is working on the request.
    2006-11-09 13:59:21 The database has finished work on the request.
    Receiving a reply from the database kernel.
    Got the following reply from db-kernel:
        SQL-Code              :-8020
        Date                  :20061109
        Time                  :00135703
        Database              :TDV
        Server                :r4335
        KernelVersion         :Kernel    7.6.00   Build 033-123-130-873
        PagesTransfered       :377688
        PagesLeft             :6903331
        MediaName             :BACK-TDV-DATA-G1
        Location              :/sapdb/TDV/backup/back-tdv-data-m10.pipe
        Errortext             :end of file
        Label                 :DAT_000000017
        IsConsistent          :true
        FirstLogPageNo        :247812
        DBStamp1Date          :20061109
        DBStamp1Time          :00135651
        BDPageCount           :7280971
        DevicesUsed           :2
        DatabaseID            :r4335:TDV_20061109_135703
        Max Used Data Page    :0
        Converter Page Count :5201
    2006-11-09 13:59:21 The backup tool is running.
    2006-11-09 13:59:22 The backup tool process has finished work with return code 2.
    2006-11-09 13:59:22 The backup tool is not running.
The backup operation has ended.
2006-11-09 13:59:22
Filling reply buffer.
    Have encountered error -24920:
        The backup tool failed with 2 as sum of exit codes. The database request failed with error -8020.
    Constructed the following reply:
        ERR
        -24920,ERR_BACKUPOP: backup operation was unsuccessful
        The backup tool failed with 2 as sum of exit codes. The database request failed with error -8020.
Reply buffer filled.
2006-11-09 13:59:22
Cleaning up.
    Removing data transfer pipes.
        Removing data transfer pipe /sapdb/TDV/backup/back-tdv-data-m11.pipe ... Done.
        Removing data transfer pipe /sapdb/TDV/backup/back-tdv-data-m10.pipe ... Done.
    Removed data transfer pipes successfully.
    Copying output of Backint for MaxDB to this file.
    ---------- Begin of output of Backint for MaxDB (/sapdb/TDV/backup/backint4sapdb.out)----------
        Reading parameter file /sapdb/data/wrk/TDV/backint4sapdb.par.
        Using staging area /sapdb/TDV/backup/stage1 with a size of 1585446912 bytes.
        Using staging area /sapdb/TDV/backup/stage2 with a size of 1585446912 bytes.
        Using 1 file per Backint for Oracle call.
        Using /sapdb/TDV/dbs/backint as Backint for Oracle.
        Using /sapdb/TDV/dbs/initTDV.utl as parameterfile of Backint for Oracle.
        Using /sapdb/data/wrk/TDV/backint4oracle.his as history file.
        Using /sapdb/TDV/backup/backint4oracle.in as input of Backint for Oracle.
        Using /sapdb/TDV/backup/backint4oracle.out as output of Backint for Oracle.
        Using /sapdb/TDV/backup/backint4oracle.err as error output of Backint for Oracle.
        Using a maximal delay for a Backint for Oracle call of 60 seconds.
        Reading input file /sapdb/TDV/backup/backint4sapdb.in.
        Backing up pipe /sapdb/TDV/backup/back-tdv-data-m10.pipe.
        Backing up pipe /sapdb/TDV/backup/back-tdv-data-m11.pipe.
        Found 2 entries in the input file.
        Starting the backup.
        Starting pipe2file program(s).
        Waiting for creation of temporary files.
        1 temporary file is available for backup.
        Calling Backint for Oracle at 2006-11-09 13:59:20.
        Calling '/sapdb/TDV/dbs/backint -u TDV -f backup -t file -p /sapdb/TDV/dbs/initTDV.utl -i /sapdb/TDV/backup/backint4oracle.in -c' .
        Backint for Oracle ended at 2006-11-09 13:59:20 with return code 2.
        Backint for Oracle output:
        Backint for Oracle output:                          Data Protection for mySAP(R)
        Backint for Oracle output:
        Backint for Oracle output:              Interface between BR*Tools and Tivoli Storage Manager
        Backint for Oracle output:              - Version 5, Release 3, Modification 2.0 for AIX LF 64-bit -
        Backint for Oracle output:                    Build: 275 compiled on Nov 20 2005
        Backint for Oracle output:         (c) Copyright IBM Corporation, 1996, 2005, All Rights Reserved.
        Backint for Oracle output:
        Backint for Oracle output: BKI2027I: Using TSM-API version 5.3.3.0 (compiled with 5.3.0.0).
        Backint for Oracle output: BKI2000I: Successfully connected to ProLE on port tdpr3ora64.
        Backint for Oracle output: BKI0005I: Start of program at: Thu Nov 9 13:59:20 MEZ 2006 .
        Backint for Oracle output: BKI5014E: Tivoli Storage Manager Error:
        Backint for Oracle output: ANS1035S (RC406) Options file '*' could not be found.
        Backint for Oracle output:
        Backint for Oracle output: BKI0020I: End of program at: Thu Nov 9 13:59:20 MEZ 2006 .
        Backint for Oracle output: BKI0021I: Elapsed time: 00 sec .
        Backint for Oracle output: BKI0024I: Return code is: 2.
        Backint for Oracle output:
        Backint for Oracle error output:
        Finished the backup unsuccessfully.
        #ERROR /sapdb/TDV/backup/back-tdv-data-m10.pipe
        #ERROR /sapdb/TDV/backup/back-tdv-data-m11.pipe
    ---------- End of output of Backint for MaxDB (/sapdb/TDV/backup/backint4sapdb.out)----------
    Removed Backint for MaxDB's temporary output file '/sapdb/TDV/backup/backint4sapdb.out'.
    Copying error output of Backint for MaxDB to this file.
    ---------- Begin of error output of Backint for MaxDB (/sapdb/TDV/backup/backint4sapdb.err)----------
        Backint for Oracle was unsuccessful.
    ---------- End of error output of Backint for MaxDB (/sapdb/TDV/backup/backint4sapdb.err)----------
    Removed Backint for MaxDB's temporary error output file '/sapdb/TDV/backup/backint4sapdb.err'.
    Removed the Backint for MaxDB input file '/sapdb/TDV/backup/backint4sapdb.in'.
Have finished clean up successfully.
i invoke the backup through dbmgui, not dbmcli!
any clues? thx in advance!
GreetZ, AH

For weeks I have been viewing a doggy day care via their web cam. This weekend I upgraded to Lion and have been unable to view the center since. I get an error message for java webcam class not found. All of my software is up to date--suggestions?

For weeks I have been viewing a doggy day care center via their web cam. This weekend I upgraded to Lion and have been unable to view the center. I get an error message for Java plug-in 1.6.0_29 ....webcam class not found. Any suggestions on how to fix this?

Sorry, don't know what else to suggest unless there's a URL to the problem stream that someone here can try. Otherwise we can't test it to try and determine what might be wrong.
BTW, make sure they're testing it with a Mac, not with a Windows system. If they test only with Windows, what they say is or is not working doesn't mean much.
Regards.

How to prevent error message for material description in MDG material detail screen, when user click on check action

Dear Experts,
I have a requirement for making material description as non mandetory in change request view of mdg material screen.
I have done that using field usage in get data method of feeder classes, but still message is displaying.
This message 'Material description is mandatory is displaying with check action only, but not with save or submit after i anhance field property as not mandetory.
How to prevent error message for material description in MDG material detail screen, when user click on check action.
Thanks
Sukumar

Hello Sukumar
In IMG activity "Configure Properties of Change Request Step", you can completely deactivate the reuse area checks (but will then loose all other checks of the backend business logic as well).
You can also set the error severity of the checks from Error to Warning (per CR type, not per check).
Or you provide a default value for the material description, e.g. by implementing the BAdI USMD_RULE_SERVICE.
Regards, Ingo Bruß

How can I display different error bars for each point on a scatter graph?

I have a scatter chart in Numbers and I need to add error bars to the points along both the x and y axes, however, the size of the error bars for each point need to be of different sizes. Is there a way to accomplish this or is there some kind of work around to acheieve a similar result? So far the only way I can find to add error bars only allows a standard amount for each point.

I found the answer here https://discussions.apple.com/message/16440653#16441393

How can i set a global error page for all error cod

how can i set a global error page for all error code?
i don't want to leave a long list in the web.xml file.could any one help me?
thanks

If u have a common Error JSP named as ErrorPage.jsp
You need to have the following piece of code in the JSP as :
<%@ page isErrorPage ="true"%>
This makes it as the Common Error Page for the Application. Now all you need to do is from other JSP's throw the Exception to teh container. The container will redirect to this Page and process accordingly.
Thanks and regards,
Pazhanikanthan. P

How can i put a custom error massege for error CS039

I enable an error massage in production order release if batch determination is not done for the component material. Iu2019m getting the error as Release rejected (check log). Error number is CS039. I want to put a custom error massage for this. Can someone suggest me the configuration for this.

Hi,
Implement the user-exit PPCO0021 - Release Control for Automatic Batch Determination
In this you can control the release of order & also issue custom messages. Work with your technical person to implement the same.
Regards,
Vivek

"returning error page for JRun too busy or out of memory"

Hello,
I've got some trouble to update a ColdFusion linux based.
We have already tried to update from ASPB11-04 and ASPB11-14 but we always have the folloing erreor message :
"returning error page for JRun too busy or out of memory"
We really need a solution ASAP. Thanks!
Jeff

Can you share the exception and application logs having the error entries.
Regards,
Anit Kumar

How to get rid of error message for the material?

Hi everybody,there is a material which is showing an error message whenevr try to create a sales order, i've checked the material master...there is no check in X-plant Mtrl or X-dist chan or any flag for deletion...but still the red error message comes up while creating a sales order...how to get rid of this error?

this means material is blocked for procurment
three kinds of block can be there
01 Blocked for procment/whse
02 Blocked for task list/BOM
03 Blocked for Purchasing
GOTO MM42 give material n plant data
Select BESIC VIEW
there is a field called as material block remove the blocking reason
Hope this will help
Edited by: WISH on Mar 24, 2008 6:33 AM

How to give error message for the screen element text field when wrong i/p

How to give error message for the screen element text field when wrong i/p
when wrong input given
eg.
I have a text box with SBOOK-CARRID
so when user give wrong entry in text box i.e LG
then I should give some error stating that the the input is invalid or not available ,
now it showing the error of standard messages,
i want manual message to be displayed when error comes.
Thank you,
Regards,
Jagrut Bharatkumar Shukla

Hi all,
Thank you for your valuable reply,
but the thing is that its a screen field,
i.e text box not a selection screen
i created in screen layout
with name sbook-carrid
now i want to get error message display if wrong i/p is given
thank you.
Regards,
Jagrut bharatkumar Shukla,

Error Message For BISystemUser: User not authenticated

We have migrated from DEV to PROD env.(11.1.1.1 -> 11.1.1.3). Along problems with bipublisher - there are some strange thingths: we successfully loging using weblogic account into AdminConsole и Enterprise Manager, but in Answers we get an error: invalid username or password.
nqserver.log:
...[ERROR:1] [] [] ... [tid: 1090] Error Message For BISystemUser: User not authenticated.
...[ERROR:1] [] [] ... [tid: 1090] [nQSError: 43126] Authentication failed: invalid user/password.
In oracle support we found such issue (Doc ID 1308389.1):
OBIEE 11g Error: "Unable to Sign in. invalid username or password was entered" After Changing Repository, Deleting BISystem User, Adding it Back (Doc ID 1308389.1)
Applies to: Business Intelligence Server Enterprise Edition - Version: 11.1.1.3.0 [1905] to 11.1.1.5.0 [1308] - Release: 11g to 11g
Symptoms: In OBIEE 11.1.1.3.0 using default authenticator, it is not possible to log in to OBIEE after changing repository. To troubleshoot, BIsystemuser was removed from global roles and added back again.
Getting error: Unable to Sign in. invalid username or password was entered
Changes: Changed repository, deleted BISystemuser, added the user back
Cause: Several changes e.g changing rpd, deleting bisystem user, adding the user back etc. occurred in the environment and caused log in to OBIEE to stop working
Solution: After a lot of troubleshooting e.g re-starting system in the correct order, refreshing GUIDs, re-start OBIEE with default SampleAppLite.rpd and web catalog, the error persists. The system was uninstalled and re-installed to avoid further corruption and configuration problems in the new installation. This resolved the problem
Does we have to 'reinstall or make a lot of troubleshooting e.g re-starting system ' to solve this error?
It seem to be funny for PROD environment. How we cam resolve this problem?

Are you saying you upgraded both dev and prod from 11.1.1.1 to 11.1.1.3 or that you migrated a dev 11.1.1.1 to a prod 11.1.1.3? What did you migrate?
At a rough guess the BISystemUser password is different in dev and prod (created by system on install) and in your 'migration' you've moved the dev credential across to prod.
If that's the case you need to change the bisystemuser password to something known and update the credential store password.
Another possibility might just be that you need to regenerate the GUIDs:
http://download.oracle.com/docs/cd/E21764_01/bi.1111/e10543/privileges.htm#BIESC721

Error message for Adobe AIR 2.0.3 while trying to run Dreamweaver CS5

imac 2.66 Ghz, Intel Core i5, OS 10.6.4.
Error message for Adobe AIR 2.0.3 while trying to run Dreamweaver CS5:
Adobe Air
the installation of this app is damaged. Try re-installing or contacting the publisher for assistance.
Tried several times to uninstall and reinstall from fresh download to no avail.
I'm finding the instructions in the trouble shooting area a tad esoteric.
Will there be an update to the installer released soon?

Hi,
I'm assuming your having troubles installing the 2.0.3 runtime? If so, can you please try the instructions in this post?
Thanks,
Chris

Error message for Unable to connect (BIB-16633)

Dear All
I use Oracle Jdeveloper10g (win32), Oracle database10g or 9i (win32 ver). But Failure to connect to OLAP service.
Can anyone give me what is the error message for BIB-16633.
Would be really grateful if you could give me a solution as soon as possible.
Thanks & Regards,
Mr.Tsang. Hong Kong

For database versions you need to have at least 9206 for 9i and 10.1.0.4 for 10g. This requires you to apply the 9206 patchset to 9i and the 10.1.0.4 patchset to the 10g base install.
Please note there are a lot of steps invloved in the patching process and you must make sure you have completed all the steps before creating your OLAP schema. Most problems occur because the patching process is incomplete and the OLAP option is in an invalid state.
You can check the state of the OLAP option using the following commands in SQLPlus:
column comp_name format a35
SELECT comp_name, status, substr(version,1,10) as version
from dba_server_registry order by modified;
Once the OLAP option is in a valid state, then you must ensure the OLAPSYS account is unlocked. To test the OLAP environment you can install the BI10G sample schema which will create a new user account called CS_OLAP which contains an Analytic Workspace.
Hope this helps
Business Intelligence Beans Product Management Team
Oracle Corporation

MR11 : error CKMLGRIR013 for a po of a material UNBW

Similar Messages

Maybe you are looking for