MRP : does not create purchase req.

Hi,
I have a batch job for RMMRP000 but the program are not always getting picked up material ABC. This material was
sitting below it's Re-order point and should have had a Purchase
Requisition created for it via RMMRP000. However no PR was created.
I then selected this material via MD03 and manually run the transaction
against this material and a PR was created.
My worry is that there are other materials within the plant that
have fallen below their Re-order point and have not been picked up by MRP, so we could be sitting without critical spares for the plant.
What should I do?
Processing key: NETCH
Create Purch. Req :1
Scheduling lines : 3
Create MRP List : 1
Planning Mode: 1
Scheduling: 1
Planning date: Current date

Hello Ellen gatchalian,
In reorder point planning, procurement is triggered when the sum of plant stock and firmed receipts falls below the reorder point
For Eg if you enter reorder point as 10. During planning run, system checks only whether stock has fallen below this reorder point or not i.e. whether there are less than 10 pieces in stock. If that is the case, system triggers procurement to the amount of lot size (fixed lot size of 500 for example).
Also check is there any safety stock maintained?? If that is the case, against your requirement, system will first consider safety stock and then requirement and Check the procurement type in MRP view of material master?
Please try and come back
Regards
R.Brahmankar

Similar Messages

MRP does not creates Shcedule Line

I have a valid scheduling agreement LPA in place. Scheduling Agreement is approved and released status.
I have source list also maintained for same scheduling agreement with long validity and MRP indicator as 2 - Create Schedule line automatically.
I am running MRP using following parameters in MD02.
Processing key          NETCH               Net Change in Total Horizon
Create purchase req.    3                   Planned orders
Delivery schedules      3                   Schedule lines
Create MRP list         1                   MRP list
Planning mode           3                   Delete and recreate planning data
Scheduling              2                   Lead Time Scheduling and Capacity Planni
Even schedule line and other parameters maintained properly, MRP creates planned order and does not creates Schedule Line automatically. Material Master is maintained MRP Type PD, Lot Size as Replenishment to maximum stock level, Safety stock, No strategy and availability on.
What I am doing wrong? With same setting in other system it is working perfectly fine.
Any feedback appreciated.
Thanks
PP

Hi
Check whether the Agreement Open Target value .
If the target quantity was completed . so system will not create the Schedule lines for the material
2. If you mainatian the open period in the smk.
so system will create the planned order instead of schedule agreement. check

CRM service order does not create purchase requisition

Dear experts,
CRM 5.0
We have a scenario where saving a released service order should create a purchase requisition in ECC and update the document flow. I have performed the following steps and still the PR isn't getting created.
1. Configuration in CRM and ECC for integration of service processes with logistics and maintaining the purchasing document types.
2. Maintaining standard pruchase groups in ECC table V_TMW01
3. Assigning standard purchase org to the plant
4. Making sure correct RFC destination is assigned to the logical system.
Am I by any chance missing some middleware steps as saving the service order does not even trigger anything in the system?
Thanks
Ritwik

Hi Ritwik,
Just check the following activities are maintained or not
1) You have created the subscription in SMOEAC with Site , Replication object and Service Order
     Process type in the criteria value.
2) You have maintained the customizing entry in CRM in spro for the following combination in logiistics
    Integration for Trans.Type Item Cat. Service Organization Org Unit (Service) Log. Scen.
Regards
Pavan.A

Batch job not creating purchase requisitions

I have a batch job that runs every day at 5 pm. The point of this job is to run the MRP and create purchase requisitions for materials that have more demand than current supply.
Programs ran within the jobu2026
RWPOB001
RVV50R10C
RMMRP000
My problem...
Purchase Requisitions are not being created for random materials after the batch job has been ran. When the MRP is run by itself (MD01), ALL materials will have purchase requisitions created for them without fail. There is no order to it, and no one has kept track of any material numbers that have not had purchase requisitions created, so I cannot check the configuration.
How I would like to investigateu2026
1 u2013 Obtain a list of ALL purchase requisitions created in the timeframe AFTER the batch job has been ran
2 u2013 Export this list into Excel
3 u2013 Run the MRP manually to create purchase requisitions for ALL materials
4 u2013 Obtain new list of ALL purchase requisitions created in the timeframe AFTER the MRP was manually ran
5 u2013 Export this list into Excel
6 u2013 Compare both lists; remove duplicates, display materials and requisitions that were created AFTER the batch job missed them.
How would I go about getting a full list of purchase requisitions that have been created within the time frame the batch job has been ran, then export them into excel? I understand that ME5A is the standard transaction for displaying lists of purchase requisitions, but how would I go about pulling all purchase reqs CREATED within a certain time period?
Please, include specific SAP transactions and details in your answers.
Also, if anyone has any good advice regarding how to get to the bottom of this specific issue, Iu2019m open to suggestions. All good suggestions will be rewarded promptly.

Cameron Lawrence Dunbar wrote:
>
> You mention that RMMRP000 should be ran before requirements planning. Is it possible that our positioning of the program at the end of the job is causing these issues? Or is it most likely the varient/parameters of one of these programs?
>
> Also, how can I display a list of purchase requisitions CREATED over a certain period of time?
No, I did not say that RMMRP000 should be ran before requirements planning. I said it is the requirments planning. So you just run it twice if you execute it with MD01 again after this job.
Running it twice should not end in different results if it is run with the same paramters (selection variants)
As you are saying you get different results, I think you are running it actually with different entries in the selection screen.
So you need to compare both selection screens. MD01 is obvious as you see it directly.
Compare it with the selection variant of the batch job, that you can display via the menu after you displayed the job in SM35
ME5A transaction can give you a list of requisitions. alternative you can just use SE16 at table EBAN.
Edited by: Jürgen L. on Apr 25, 2011 9:08 PM

Need to create a sales order that does not create demand

Hi,
We need to create a no cost sales order - that does not create demand
In our current set-up when we try to create a no cost sales order with a material ( It Cat = Norm) we see demand being created in MD04
What configuration settings will allow us a deliverable order - that does not create demand (no MRP run?)
Thanks,
SM

Hello,
For this set of requirement i think the best option would be to configure a New Sales Order Type and a new Schedule Line Category. In VOV6, While you are defining a new Schedule line category in the transaction flow make sure to switch off the three check box.
Transfer of requirements / Begin assembly order from SD
Availability check for sales
Product allocation active
Then when we are assigning this newly defined Schedule line Category to Item category, make sure to leave the field of MRP Type as blank in VOV5.
Regards,
Sarthak

Save as does not Create PDF Compatible File even when the creare pdf compatible files is on, Illustrator CC 2014

save as does not Create PDF Compatible File even when the creare pdf compatible files is on, Illustrator CC 2014

When I open is adobe acrobat I get this message.
"This is an Adobe® Illustrator® File that was
saved without PDF Content.
To Place or open this le in other
applications, it should be re-saved from
Adobe Illustrator with the "Create PDF
Compatible File" option turned on. This
option is in the Illustrator Native Format
Options dialog box, which appears when
saving an Adobe Illustrator le using the
Save As command."

Mail does not create new emails based on the highlighted mailbox, but rather the receiving mailbox of whatever individual email happens to be highlighted. This was not the case prior to Lion. Is this a bug or an error on my part?

Mail does not create new emails based on the highlighted mailbox, but rather according the receiving mailbox of whatever individual email happens to be highlighted. This was not the case prior to Lion. Is this a bug or an error on my part? (I do have the setting for creating new emails from the highlighted mailbox checked.)

The questions about time was not only because of thinking about the Time Machine, but also possible impact on recognizing which messages remaining on a POP server (doesn't apply to IMAP) have been already downloaded. In the Mail folder, at its root level, in Mail 3.x there is a file named MessageUidsAlreadyDownloaded3 that should prevent duplicate downloading -- some servers may not communicate the best with respect to that, and the universal index must certainly be involved in updating that index file. If it corrupts, it can inhibit proper downloading. However, setting the account up in a New User Account and having the same problem does not point that way, unless your POP3 server is very different from most.
That universal index is also typically involved when messages are meant to be moved from the Inbox to another mailbox -- in Mail 3.x the message does not move, but rather is copied, and then erased from the origin mailbox. That requires updating the Envelope Index to keep track of where the message is, and should keep track of where it is supposed to have been removed after the "Move".
Ernie

Adobe After Effects CC 2014 Multi-machine rendering does not create RCF after Collect-File

This was working in the previous release. After going through all of the steps to perform a multi-machine render, not only does it say it is limiting it to 5 machines instead of the usual 99 (and I have over 100 cores on the render farm) but "Collect Files" (File/Dependencies/Collect Files) does not create the Render Control File (RCF) that kicks off the process on the other machines, like it did before and is supposed to do.
This release was supposed to fix the 32 core limitation on render nodes (my server has 48), but now does nothing at all.
Anyway, I assume there is a check box somewhere that says "do something" that hasn't been checked and another that says "Maybe my machine has more than 5 cores", and I would appreciate being steered in the direction of these new mis-features.
Just as background, the 48 core server does show the little TV screen that monitors the watch folder, and I know for a fact that process looks for the "RCF" file. Looking at the directory specified for "collect files", I can see that no RCF file is created, only 1 file, a report.txt file which contains this information is produced:
Report created:
7/9/2014 1:54:12 AM
Project name: highup.aep
Source files collected to:
P:\temp\highup folder
Source files collected: All
Collected comps:
Thomas Falke - High Again High On Emotion)
Number of collected files: 1
Size of collected files: 63.4 MB
Collected source files:
C:\Users\Jeff K\Videos\Down\2014-2015\Thomas Falke - High Again High On Emotion).mp4
Rendering plug-ins:
Classic 3D
Effects used: 1
Effect: Detail-preserving Upscale

The dialog box has been slightly refactored. You must click "Allow watch folder rendering" and then all is good. Hope this helps anyone else. Thanks to Rafil at customer support chat for this.

Payment Wizard Does not create the File

Hi I am trying to run the payment wizard and in the final step it says it ran successful and create the outgoing payments but it does not create the payment file for the bank.
Step 1
            Start a new Payment run
Step 2
           payment type : out going
           payment method : bank transfer
           File Path : Go to Desktop and file name is test
Step3
          Select the business partner
Step 4
         Select the date range
Step 5
        Select the payment method
Step 6
        Select the Invoices
Step 7
        Execute
It says successfully Executed the payment and create outgoing payment for the business partner.
But it does not create the payment file (test in the Desktop)
Please help me!!!
Thanks
Sanjaya

Hi Sanjaya,
Check the link
Payment Wizard
Payment Wizard Run does not create Payment/Check
Payment Wizard/Engine - creation of Bank File
*Close the thread if issue solved.
Regards
Jambulingam.P

MS Outlook 2010 Add in Create pdf - does not create pdf of draft emails- Adobe Acrobat Pro X

In MS Outlook 2010 Add in Create pdf- does not create pdf of draft emails- this maybe the case, but just wanted to make sure this is normal for the program- though I guess one can print as an Adobe pdf but it does not maintain the hyperlinks of email addresses etc. the functionality is compromised in a print vs create a pdf.

Here's a workaround by the team:
Right click on the message from Explorer list view or folder view and chose the option to convert to PDF.

SQLJ Translation does not create profile file

SQLJ Translation does not create profile file.
After translating a small file HelloWorld.sqlj
the following files are created:
HelloWorld_SJProfileKeys.class
HelloWorld.class
HelloWorld.java
Although there is a HelloWorld_SJProfileKeys.class, profile file HelloWorld_SJProfile0.ser has NOT been created.
The starting file .sqlj file HelloWorld.sqlj is taken from O'Reilly book 'Java Programming with Oracle SQLJ' by Jason Price. The file contains a valid SQL statement to display the date.
My environment variables were set up with instructions from:
http://www.onjava.com/pub/a/onjava/2001/12/05/learning_sqlj.html
When I run java HelloWorld to run the .java file, I get the error:
SQLException java.sql.SQLException: profile HelloWorld_SJProfile0 not found: java.lang.ClassNotFoundException: HelloWorld_SJProfile0
I searched the internet high and low for a similar error to mine but I could not find a match.
I read the following text from http://otn.oracle.com/tech/java/sqlj_jdbc/htdocs/faq.html#translationerrors
but it does not help me.
"ClassNotFoundException: xxx.yyy_SJProfile0 for class xxx.yyy_SJProfileKeys
If you see an exception such as:
java.sql.SQLException: profile xxx.yyy_SJProfile0 not found:
java.lang.ClassNotFoundException:
xxx.yyy_SJProfile0 for class xxx.yy_SJProfileKeys
then you must ensure that the SQLJ profile(s), such as xxx/yyy_SJProfile0.ser, is available in the SQLJ runtime environment. This includes JARing this file as part of an applet deployment, or publishing it to the server via loadjava.
Any ideas? Thanks in advance,
John
Helloworld.sqlj before translation:
The program HelloWorld.sqlj illustrates how to connect to a
database, and display the words "Hello World" along with
the current date.
// import required packages
import java.sql.Date;
import java.sql.SQLException;
import oracle.sqlj.runtime.Oracle;
public class HelloWorld {
public static void main(String [] args) {
java.sql.Date current_date;
try {
// connect to the database
Oracle.connect(
"jdbc:oracle:thin:@localhost:1521:orac",
"scott",
"tiger"
// get the current date from the database
#sql { SELECT sysdate INTO :current_date FROM dual };
// display message
System.out.println("Hello World! The current date is " +
current_date);
} catch ( SQLException e ) {
System.err.println("SQLException " + e);
} finally {
try {
// disconnect from the database
Oracle.close();
} catch ( SQLException e ) {
System.err.println("SQLException " + e);
} // end of main()
HelloWorld.java after translation:
/*@lineinfo:filename=HelloWorld*//*@lineinfo:user-code*//*@lineinfo:1^1*//*
The program HelloWorld.sqlj illustrates how to connect to a
database, and display the words "Hello World" along with
the current date.
// import required packages
import java.sql.Date;
import java.sql.SQLException;
import oracle.sqlj.runtime.Oracle;
public class HelloWorld {
public static void main(String [] args) {
java.sql.Date current_date;
try {
// connect to the database
Oracle.connect(
"jdbc:oracle:thin:@localhost:1521:orcl",
"scott",
"tiger"
// get the current date from the database
/*@lineinfo:generated-code*//*@lineinfo:28^7*/
// #sql { SELECT sysdate FROM dual };
sqlj.runtime.profile.RTResultSet __sJT_rtRs;
sqlj.runtime.ConnectionContext __sJT_connCtx = sqlj.runtime.ref.DefaultContext.getDefaultContext();
if (__sJT_connCtx == null) sqlj.runtime.error.RuntimeRefErrors.raise_NULL_CONN_CTX();
sqlj.runtime.ExecutionContext __sJT_execCtx = __sJT_connCtx.getExecutionContext();
if (__sJT_execCtx == null) sqlj.runtime.error.RuntimeRefErrors.raise_NULL_EXEC_CTX();
synchronized (__sJT_execCtx) {
sqlj.runtime.profile.RTStatement __sJT_stmt = __sJT_execCtx.registerStatement(__sJT_connCtx, HelloWorld_SJProfileKeys.getKey(0), 0);
try
sqlj.runtime.profile.RTResultSet __sJT_result = __sJT_execCtx.executeQuery();
__sJT_rtRs = __sJT_result;
finally
__sJT_execCtx.releaseStatement();
try
sqlj.runtime.ref.ResultSetIterImpl.checkColumns(__sJT_rtRs, 1);
if (!__sJT_rtRs.next())
sqlj.runtime.error.RuntimeRefErrors.raise_NO_ROW_SELECT_INTO();
current_date = __sJT_rtRs.getDate(1);
if (__sJT_rtRs.next())
sqlj.runtime.error.RuntimeRefErrors.raise_MULTI_ROW_SELECT_INTO();
finally
__sJT_rtRs.close();
/*@lineinfo:user-code*//*@lineinfo:28^58*/
// display message
System.out.println("Hello World! The current date is " +
current_date);
} catch ( SQLException e ) {
System.err.println("SQLException " + e);
} finally {
try {
// disconnect from the database
Oracle.close();
} catch ( SQLException e ) {
System.err.println("SQLException " + e);
} // end of main()
}/*@lineinfo:generated-code*/class HelloWorld_SJProfileKeys
private static HelloWorld_SJProfileKeys inst = null;
public static java.lang.Object getKey(int keyNum)
throws java.sql.SQLException
if (inst == null)
inst = new HelloWorld_SJProfileKeys();
return inst.keys[keyNum];
private final sqlj.runtime.profile.Loader loader = sqlj.runtime.RuntimeContext.getRuntime().getLoaderForClass(getClass());
private java.lang.Object[] keys;
private HelloWorld_SJProfileKeys()
throws java.sql.SQLException
keys = new java.lang.Object[1];
keys[0] = sqlj.runtime.ref.DefaultContext.getProfileKey(loader, "HelloWorld_SJProfile0");
}

SQLJ Translation does not create profile file.
After translating a small file HelloWorld.sqlj
the following files are created:
HelloWorld_SJProfileKeys.class
HelloWorld.class
HelloWorld.java
Although there is a HelloWorld_SJProfileKeys.class, profile file HelloWorld_SJProfile0.ser has NOT been created.
The starting file .sqlj file HelloWorld.sqlj is taken from O'Reilly book 'Java Programming with Oracle SQLJ' by Jason Price. The file contains a valid SQL statement to display the date.
My environment variables were set up with instructions from:
http://www.onjava.com/pub/a/onjava/2001/12/05/learning_sqlj.html
When I run java HelloWorld to run the .java file, I get the error:
SQLException java.sql.SQLException: profile HelloWorld_SJProfile0 not found: java.lang.ClassNotFoundException: HelloWorld_SJProfile0
I searched the internet high and low for a similar error to mine but I could not find a match.
I read the following text from http://otn.oracle.com/tech/java/sqlj_jdbc/htdocs/faq.html#translationerrors
but it does not help me.
"ClassNotFoundException: xxx.yyy_SJProfile0 for class xxx.yyy_SJProfileKeys
If you see an exception such as:
java.sql.SQLException: profile xxx.yyy_SJProfile0 not found:
java.lang.ClassNotFoundException:
xxx.yyy_SJProfile0 for class xxx.yy_SJProfileKeys
then you must ensure that the SQLJ profile(s), such as xxx/yyy_SJProfile0.ser, is available in the SQLJ runtime environment. This includes JARing this file as part of an applet deployment, or publishing it to the server via loadjava.
Any ideas? Thanks in advance,
John
Helloworld.sqlj before translation:
The program HelloWorld.sqlj illustrates how to connect to a
database, and display the words "Hello World" along with
the current date.
// import required packages
import java.sql.Date;
import java.sql.SQLException;
import oracle.sqlj.runtime.Oracle;
public class HelloWorld {
public static void main(String [] args) {
java.sql.Date current_date;
try {
// connect to the database
Oracle.connect(
"jdbc:oracle:thin:@localhost:1521:orac",
"scott",
"tiger"
// get the current date from the database
#sql { SELECT sysdate INTO :current_date FROM dual };
// display message
System.out.println("Hello World! The current date is " +
current_date);
} catch ( SQLException e ) {
System.err.println("SQLException " + e);
} finally {
try {
// disconnect from the database
Oracle.close();
} catch ( SQLException e ) {
System.err.println("SQLException " + e);
} // end of main()
HelloWorld.java after translation:
/*@lineinfo:filename=HelloWorld*//*@lineinfo:user-code*//*@lineinfo:1^1*//*
The program HelloWorld.sqlj illustrates how to connect to a
database, and display the words "Hello World" along with
the current date.
// import required packages
import java.sql.Date;
import java.sql.SQLException;
import oracle.sqlj.runtime.Oracle;
public class HelloWorld {
public static void main(String [] args) {
java.sql.Date current_date;
try {
// connect to the database
Oracle.connect(
"jdbc:oracle:thin:@localhost:1521:orcl",
"scott",
"tiger"
// get the current date from the database
/*@lineinfo:generated-code*//*@lineinfo:28^7*/
// #sql { SELECT sysdate FROM dual };
sqlj.runtime.profile.RTResultSet __sJT_rtRs;
sqlj.runtime.ConnectionContext __sJT_connCtx = sqlj.runtime.ref.DefaultContext.getDefaultContext();
if (__sJT_connCtx == null) sqlj.runtime.error.RuntimeRefErrors.raise_NULL_CONN_CTX();
sqlj.runtime.ExecutionContext __sJT_execCtx = __sJT_connCtx.getExecutionContext();
if (__sJT_execCtx == null) sqlj.runtime.error.RuntimeRefErrors.raise_NULL_EXEC_CTX();
synchronized (__sJT_execCtx) {
sqlj.runtime.profile.RTStatement __sJT_stmt = __sJT_execCtx.registerStatement(__sJT_connCtx, HelloWorld_SJProfileKeys.getKey(0), 0);
try
sqlj.runtime.profile.RTResultSet __sJT_result = __sJT_execCtx.executeQuery();
__sJT_rtRs = __sJT_result;
finally
__sJT_execCtx.releaseStatement();
try
sqlj.runtime.ref.ResultSetIterImpl.checkColumns(__sJT_rtRs, 1);
if (!__sJT_rtRs.next())
sqlj.runtime.error.RuntimeRefErrors.raise_NO_ROW_SELECT_INTO();
current_date = __sJT_rtRs.getDate(1);
if (__sJT_rtRs.next())
sqlj.runtime.error.RuntimeRefErrors.raise_MULTI_ROW_SELECT_INTO();
finally
__sJT_rtRs.close();
/*@lineinfo:user-code*//*@lineinfo:28^58*/
// display message
System.out.println("Hello World! The current date is " +
current_date);
} catch ( SQLException e ) {
System.err.println("SQLException " + e);
} finally {
try {
// disconnect from the database
Oracle.close();
} catch ( SQLException e ) {
System.err.println("SQLException " + e);
} // end of main()
}/*@lineinfo:generated-code*/class HelloWorld_SJProfileKeys
private static HelloWorld_SJProfileKeys inst = null;
public static java.lang.Object getKey(int keyNum)
throws java.sql.SQLException
if (inst == null)
inst = new HelloWorld_SJProfileKeys();
return inst.keys[keyNum];
private final sqlj.runtime.profile.Loader loader = sqlj.runtime.RuntimeContext.getRuntime().getLoaderForClass(getClass());
private java.lang.Object[] keys;
private HelloWorld_SJProfileKeys()
throws java.sql.SQLException
keys = new java.lang.Object[1];
keys[0] = sqlj.runtime.ref.DefaultContext.getProfileKey(loader, "HelloWorld_SJProfile0");
}

Server does not create ois ?

Hi folks !
At first I wanted to send some Strings via the Client to the Server and print them onto the screen. On a specific String "antwort" I would like to send an Object k from the Server to the Client and prove on the Client the correctness of the object by reading the attribute set on the serverside before sending.
But somehow the server does not create the ObjectInputStreams and I don�t know why.
That�s the code:
// Server:
public class Server {
public Server() {
try{
String input = new String();
ServerSocket sock = new ServerSocket(16348);
Socket socket = sock.accept();
System.out.println("socket"); // this line is printed on connection
ObjectInputStream sockin = new ObjectInputStream(socket.getInputStream());
System.out.println("objectinputstream"); // but this one never appears
ObjectOutputStream sockout = new ObjectOutputStream(socket.getOutputStream());
Kunde k = new Kunde();
k.setNummer(13);
while(!input.equals("Ende")){
input = sockin.readObject().toString();
if(input.equals("antwort")){
sockout.writeObject(k);
sockout.flush();
sockout.reset();
System.out.println(input);
socket.close();
catch(Exception e){
public static void main(String[] args) {
// TODO code application logic here
new Server();
// The Client
public class Client {
public Client() {
try{
Socket sock = new Socket("localhost",16348);
// System.out.println(sock.isOutputShutdown());
sock.setSoTimeout(5000);
System.out.println("socket hergestellt");
ObjectInputStream sockin = new ObjectInputStream(sock.getInputStream());
System.out.println("sockin");
ObjectOutputStream sockout = new ObjectOutputStream(sock.getOutputStream());
System.out.println("sockout");
String eing = "";
System.out.println("vor while");
while(!eing.equals("close")){
eing = erwarteEingabe();
System.out.println("Sende:"+eing);
if(eing.equals("antwort")){
sockout.writeObject(eing);
Kunde k = (Kunde)sockin.readObject();
System.out.println("Nummer des Kunden: "+k.getNr());
else{
sockout.writeObject(eing);
sockout.flush();
sockout.reset();
catch(Exception e){
System.out.println(e);
public static void main(String[] args) {
// TODO code application logic here
new Client();
private String erwarteEingabe(){
String eing = "";
System.out.println("nehme Eing entgegen");
try{
BufferedReader b = new BufferedReader(new InputStreamReader(System.in));
return b.readLine();
catch(Exception e){
System.out.println(e);
return "";
}

When you create an ObjectInputStream it tries to read the object stream header from the underlaying stream. In this case both your server and client are waiting for the other one to send the header before they can continue. This problem can be avoided by simply creating the object output streams first:ObjectOutputStream sockout = new ObjectOutputStream(socket.getOutputStream());
ObjectInputStream sockin = new ObjectInputStream(socket.getInputStream());

Transport Screen objects-GUI status(SAP does not create request, why)?

Hi experts,
I use SE80 to change GUI status, but system does not create a transport request for me to transfer? why?

Hi,
Thanks for replay. Actually, the SE80->program->Gui status have some objects and they are already transfered. But I can't see them on target system. But When I create exactly the same name, the system tell me they are already created. I think it becuase the original language is 'DE' but I use default language 'EN' to modify and create the request?

SQLJ translator for ISO/ANSI does not create .SER profile (Jdev 9.0.0 prev)

The SQLJ translater that comes with JDeveloper 9.0.3 preview does not create profiles (.SER) when running with -codegen=ansi or iso. Thus producing none runnable code.
It is not possible to set any switches in JDev.
Previous versions of the translated did produce the .SER files.
Is there a workaround possible?
Thanks,
Robert

Fo the answer and a workaround look here:
Re: A field is missing in my table.....
-Robert

SQLJ translator for ISO/ANSI does not create .SER profile (Jdev 9.0.3 prev)

The SQLJ translater that comes with JDeveloper 9.0.3 preview does not create profiles (.SER) when running with -codegen=ansi or iso. Thus producing none runnable code.
It is not possible to set any switches in JDev.
Previous versions of the translated did produce the .SER files.
Is there a workaround possible?
Thanks,
Robert
P.S.: I posted this also in the SQLJ forum.

Robert,
My mistake - you are correct, the change I mentioned was put in just after the Preview Release. The .ser files will go into the project source directory in the Preview Release. But this should be the same behavior as in previous releases - are you seeing a difference in behavior between a past release and the Preview Release? Everything up to and including the 9.0.3 Preview Release should put the .ser files in the project source directory. When the 9.0.3 Production Release is available, they will be put into the project output directory instead.
The fix to put the .ser files into the output directory is not in the translator.jar file. It is in the core JDeveloper code (in jdev.jar). So unfortunately it is not a fix that could be easily dropped into the Preview Release. However, it will be available in the 9.0.3 Production Release.
-Matt Hawkins, JDeveloper Team

MRP : does not create purchase req.

Similar Messages

Maybe you are looking for