MRP -Individual requirements of the same day are summarized in PReq

Hi all,
I have a problem with MRP.  For example, there is 2 PP or CS order with the same material, SAP creates automatic reservation for these order for the same day. When I do MRP run, SAP crates one Preq, and I want to have two PReq for each reservations. Is it possible ? And how?
Example: Material A
MRP type: PD
Lot size: EX
availability check: 02 - individual requirement
strategy group:PP
safety stock:30
Stock requirement list:
22.08.2007   Stock                            0
22.08.2007   Safety st                      30
22.08.2007   reservation 1                 50
22.08.2007   reservation 2                100
After MRP run, SAP creates one Preq with value 180.
in the next situation, if the date of reservations are different, then it will be different PReq.
Stock requirement list:
22.08.2007   Stock                            0
22.08.2007   Safety st                      30
22.08.2007   reservation 1                 50
28.08.2007   reservation 2                100
SAP will create 2 PReq. One with 80, and another with 100.
But, I need to have 3 Preq, for 30, 50 and 100.
Thanx in advance,
Natasa

Dear Natasa,
In my opinion, the system is working perfectly ok.  Why would you want to convert three PRs to PO when you could do with one.  Also, you will not be able to track the progress of prs against reservations until and unless you are entering the reservation number in the tracking number field.  By splitting the PRs you would be increasing the load of the Purchase Group and chances of PRs not getting converted to order are high due to high volumes of PR.  You will also be consuming a lot of number range and increasing your Datebase as well. Last but not the lease you will have a lot of PR/PO to follow up on. 
reg
Kiki

Similar Messages

  • Several plan orders for the same day

    Hi SAP Experts,
    In my company we have a requirement to produce the same finish material in two work centers, using different BOMs. This was achieved through production versions for production orders. Now we need to plan (Indipendent requirement & Plan orders )the material based on these two BOMs.
    We enter the indipendent requirement in MD61. I have given the production version against the requirement (In schedule lines tab). However i am unable to give two different requirements for the same day in different production versions.
    Then i tried using different planning versions and assigning the different production versions to different plan versions.
    Although my indipendent requirements are taken in different production versions(As I can see in MD04). When i run MRP plan orders are raised as the total of the requirements and in only one production version.
    Please, Can some one help me to find a method to raise different plan orders for the same day in different production versions???
    regards,
    Madhushika

    Dear All,
    I tried  quota arrangements as a solution for above mentioned problem. What i require is to devide the PIR for a particular day in to two equal parts in two different production versions so that two plan orders will raise in equal quantities for the same day in two different production versions.
    With quota arrangement what i get is alternative plan oders in different versions in diffrent days.
    For example If my PIR are
    Day 1 = 1000
    Day 2 = 1500
    Day 3 =  500
    Day 4 = 1000
    what i get is
    Day 1 = 1000  - prd ver1
    Day 2 = 1500  - prd ver2 
    Day 3 =  500   - prd ver1
    Day 4 = 1000  - prd ver2
    What i want is
    Day 1 = 500 -prd ver1
    Day 1 = 500 -prd ver2
    Day 2 = 750 -prd ver1
    Day 2 = 750 -prd ver2
    Day 3 =  250 -prd ver1
    Day 3 =  250 -prd ver2
    Day 4 = 500 -prd ver1
    Day 4 = 500 -prd ver2
    Hope its clear to you all.
    Please advise me how to configure the system according to this reqirement.
    Best regards,
    Madhushika

  • Majority of Apps released are being reviewed/released the same day?

    Check this out:
    http://www.medialets.com/app-store-metrics/feeds/new/
    If you look at the release dates (when they get submitted), they are generally the same day that they hit the AppStore.
    I verified this by looking at one of my apps, and the "release date" was the same day I submitted it. However it showed up in the app store (10 days later) .. therefore I believe that the release date is actually accurate.
    What does this mean?
    I believe it means that most apps that hit the appstore are getting churned out the same day. If you don't get released on the same day, you might be in for a very long wait, or there is something wrong with you / your app.
    Some ideas:
    - App that is uninteresting to the reviewers
    - It's your second+ app
    - Bad reviews / low popularity for existing apps
    - Problems with the App
    It's an interesting problem. It's unclear to me that there is a solution, except to write high quality, innovative, interesting apps that your pretty sure Apple will like and will get reviewed well / be popular .. which I suppose, isn't such a bad thing, all considered.

    My first app took 8 days to go from review to pending contract. It's been pending contract for 3 days now.
    I find it unlikely a lot of apps are getting to the store in 1 day.
    {quote:title=blazespinnaker wrote:}
    I verified this by looking at one of my apps, and the "release date" was the same day I submitted it. However it showed up in the app store (10 days later) .. therefore I believe that the release date is actually accurate.
    {quote}
    This contradicts your whole point I think. If your app took 10 days from the release/submit date then why do you think so many apps are going to the store the day they are submitted. Maybe I'm misunderstanding your statement.

  • I have a iTunes account and recently 2 of the song I have downloaded will not play, it says that it not authorised to play. How ever on the same day the other songs I downloaded that day are playing fine

    I have a iTunes account and recently 2 of the song I have downloaded will not play, it says that it not authorised to play. How ever on the same day the other songs I downloaded that day are playing fine. I can't play the 2 song on my lap top and I-pod.

    Hello Jigz19,
    It sounds like you are unable to play a couple of songs from your library becuase you get a message that the computer is unauthorized to play, but other content purchased that same day works without issue. I would verify that the affected songs were purchased with the same Apple ID first:
    Recovering a forgotten iTunes Store account name
    http://support.apple.com/kb/ht1920
    Open iTunes
    Highlight one of the items you have purchased (You can find your purchases in your Purchases playlist).
    Choose File > Get Info.
    Click the Summary tab.
    The Account Name area will list the account used to purchase the item. Unless you have changed accounts, this is your iTunes Store account name.
    If so, then delete the songs:
    How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
    http://support.apple.com/kb/HT5772
    Then re download them with this article:
    Download past purchases
    http://support.apple.com/kb/ht2519
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • Multiple leave requests on the same day

    We would like to enforce a check so that multiple leave requests of the same type cannot be submitted for the same day on ESS.
    How can this be achieved ? We are on EP 7.0 and ECC 6.0 and are using webdynpro java version of the ESS applications.
    Any configuration available for this or does this require a BADI implementation ?
    Thanks in advance.
    Thank You,
    Raj

    http://wiki.sdn.sap.com/wiki/display/ERPHCM/ValidationsforESSLeaverequest
    read here, it requies a badi implementation only, no config is available!
    You have to call backend exits from the badi of leave request
    Edited by: Siddharth Rajora on Aug 2, 2011 7:48 AM

  • Multiple Meter Reads on the same day and Billing

    Hi All,
    There is a requirement to hold all reads received from Customer/ Meter Reader etc even they these are received on the same day for e.g. schedule read could be received in the morning, followed by customer read through internet and then another customer read through IVR system.
    Can we store multiple reads on the same day?
    If a read goes into implausible and then it's corrected, implausible read is replaced by corrected read. Is there any way to store old implausible read?
    Thanks in advance.
    SJ

    Your questions answered below:
    1. So my question is can we enter multiple reads to the Meter on a single day with same meter read reason? - Yes when we have MR reason which is not relevant to billing. In your case its 09 which is nonrelevant and you should be able to enter multiple reads with different time.
    Make sure you supply time also when you are submitting your read. However there is a restriction of what level you can enter multiple MRs since SAP stores read at Minute level so you can not post 2 reads in same minute.
    2. Are there any configurations to be done to allow multiple meter readings on a single day? - Not sure but standard SAP should allow you to save multiple MRs with the above rules.
    Cheers
    Jignesh

  • Two or more productid will be accquired by same customerid, by same shipvia, on the same day of the week of shipped date. i want the simple query for this.

    consider this situation,
     Two or more productid will be accquired by same customerid, by same shipvia, on the same  day of the week of shipped date. i want the simple query for this.
    my tables are  from northwind:
    [orders] = OrderID, CustomerID, EmployeeID, OrderDate, RequiredDate, ShippedDate, ShipVia, Freight, ShipName, ShipAddress, ShipCity, ShipRegion, ShipPostalCode, ShipCountry.
    [orders details] = OrderID, ProductID, UnitPrice, Quantity, Discount.
    i tried some but it is not exact, it gives wrong result.
    select pd.CustomerID,pd.ProductID, pd.no_of_time_purchased, sd.ShipVia, sd.same_ship_count, shipped_day from
    select ProductID,o.CustomerID,COUNT(productid) as no_of_time_purchased
    from orders o join [Order Details] od on o.OrderID=od.OrderID group by ProductID,o.CustomerID
    having count(od.ProductID) >1) pd
    join
    (select OrderID,customerid, shipvia, count(shipvia)as same_ship_count, DATENAME(DW,ShippedDate)as shipped_day from orders
    group by customerid, ShipVia, ShippedDate having COUNT(ShipVia) > 1 ) sd
    on sd.CustomerID=pd.CustomerID

    Hi,
    I think I have a solution that will at least give you a clue how to go about it. I have simplified the tables you mentioned and created them as temporary tables on my side, with some fake data to test with. I have incldued the generation of these temporary
    tables for your review.
    In my example I have included:
    1. A customer which has purchased the same product on the same day, using the same ship 3 times,
    2. Another example the same as the first but the third purchase was on a different day
    3. Another example the same as the first but the third purchase was a different product
    4. Another example the same as the first but the third purchase was using a different "ShipVia".
    You should be able to see that by grouping on all of the columns that you wich to return, you should not need to perform any subselects.
    Please let me know if I have missed any requirements.
    Hope this helps:
    CREATE TABLE #ORDERS
     OrderID INT,
     CustomerID INT,
     OrderDate DATETIME,
     ShipVia VARCHAR(5)
    CREATE TABLE #ORDERS_DETAILS
     OrderID INT,
     ProductID INT,
    INSERT INTO #ORDERS
    VALUES
    (1, 1, GETDATE(), 'ABC'),
    (2, 1, GETDATE(), 'ABC'),
    (3, 1, GETDATE(), 'ABC'),
    (4, 2, GETDATE() - 4, 'DEF'),
    (5, 2, GETDATE() - 4, 'DEF'),
    (6, 2, GETDATE() - 5, 'DEF'),
    (7, 3, GETDATE() - 10, 'GHI'),
    (8, 3, GETDATE() - 10, 'GHI'),
    (9, 3, GETDATE() - 10, 'GHI'),
    (10, 4, GETDATE() - 10, 'JKL'),
    (11, 4, GETDATE() - 10, 'JKL'),
    (12, 4, GETDATE() - 10, 'MNO')
    INSERT INTO #ORDERS_DETAILS
    VALUES
    (1, 1),
    (2, 1),
    (3, 1),
    (4, 2),
    (5, 2),
    (6, 2),
    (7, 3),
    (8, 3),
    (9, 4),
    (10, 5),
    (11, 5),
    (12, 5)
    SELECT * FROM #ORDERS
    SELECT * FROM #ORDERS_DETAILS
    SELECT
     O.CustomerID,
     OD.ProductID,
     O.ShipVia,
     COUNT(O.ShipVia),
     DATENAME(DW, O.OrderDate) AS [Shipped Day]
    FROM #ORDERS O
    JOIN #ORDERS_DETAILS OD ON O.orderID = OD.OrderID
    GROUP BY OD.ProductID, O.CustomerID, O.ShipVia, DATENAME(DW, O.OrderDate) HAVING COUNT(OD.ProductID) > 1
    DROP TABLE #ORDERS
    DROP TABLE #ORDERS_DETAILS

  • Limiting the time when Sales Orders can be confirmed on the same day

    Hello Gurus. The business has a requirement where they want to limit the time of the day when they can confirm sales orders on the same day.
    So, when they receive a sales order, they want that if the order is received after a certain time (e.g. 14:00) then it cannot be confirmed for that same day, it can only be confirmed the next day.
    How can I implement this limitation?

    Fernando,
    Let me restate your requirement so that I understand your question: 
    A Sales order is created 'today' with a requested delivery date of 'today'.
    There exists adequate material in Stock to confirm the order.
    You want the confirmed date to be 'some-amount-of-time-later-than-now"
    (say 18 hours or so)
    Which confirmed date in the sales order are you talking about?
    Confirmed Material Availability date?
    Confirmed Loading date?
    Confirmed Transportation planning date?
    Confirmed Goods Issue date?
    Confirmed Delivery Date?
    Many people with this requirement use 'delivery scheduling', and add a half day or so in pick/pack processing time.  This means that you are recognizing that it takes a bit of time to create the delivery notice, print the shipping papers, pick and pack the parts, and get them ready for the carrier to ship.  So, for an order entered 'now', it wouldn't be due to ship from your warehouse until 'a half day from now'.
    To enable Delivery scheduling  IMG>SD>Basic Functions>Delivery scheduling and transportation scheduling>Define scheduling by sales document type. Select the relevant ordertypes, tick delivery scheduling.
    If this is already selected, then you can increase the pick/pack processing time of the shipping point in IMG transaction OVLZ.  It can be set to a fraction of a day (2 decimal points).
    Regards,
    DB49

  • Having salary increase and salary increase due to promotion on the same day

    Hi ,
    Would like to know if it is possible to have 2 salary increase (one a promotion and the other a annual salary increase) for an employee on the same day? This is because we are reporting on salary increase and would like to know how many time an individual had an increase. If it is possible how do we do it ? If not why can we? Will need both to have the same effective day.thk
    rgd
    YYTAY

    If you were using Salary Administration, then you could possibly apply multiple (up to 10 different ones I think) Salary Proposal Components to a single proposal - e.g. +1,500 for 'promotion' and +1,000 for 'annual increase' means a total increment of +2,500
    Clive

  • How do I enlarge the all-day area in iCal?

    Hi there,
    I'd like to have all my all-day events in week-view visible at the same time, but currently I can only see five and a half of them and need to scroll to see the rest. Is there a way to enlarge the all-day area?
    Thanks in advance

    Hi,
    You can only see a limited number of all day events.  I suggest you send Apple feedback if you think it should work differently. https://www.apple.com/feedback/
    Best wishes
    John M

  • Find the same day in a range then find the difference between the days

    Need assistnace with the following .
    I have a table of ids for courses and each course class is on a day. I have to take the first day the course class is on and find the next same day then work out the difference in days.
    eg. a course class is on a saturday then have to go thru the course class associated to a course and find the next saturday then work out the difference.
    Anyone able to help - it would be much appreciated

    course class id date day
    abcdefa 18/12/2002 wednesday
    abcdefb 19/12/2002 thursday
    abcdefc 20/12/2002 friday
    zxvyza 17/12/2002 monday
    zxvyzb 20/12/2002 thursday
    zxvyzc 21/12/2002 friday
    zxvyzd 24/12/2002 monday
    zxvyze 26/12/2002 wednesday
    lmnopa 11/11/2002 tuesday
    lmnopb 12/11/2002 wednesday
    lmnopc 14/11/2002 friday
    lmnopd 19/11/2002 wednesday
    lmnope 21/11/2002 friday
    where abcdefa, abcdefbc, abcdefc are for course id abcdef
    and the other set of course class ids are for course id zxvyz.
    and 3rd set relates to course id lmnop.
    expectation:
    the difference between days for the first set of data to be 0
    the difference between days for 2nd set to be 7 days (ie. take the first day for the course class and see if can find another that is the same and then work out the difference i.e monday) then return the difference then go to next course class id.
    the diff between 3rd set is calc the diff between Wednesdays, ignore the last friday and find the next course class id. the answer here will be 7 days.
    I have worked out the days from the dates (although the above is only an example)but wasnt sure how to pick the same days then work out the difference and then move to the next course class id. Some course classes wont have another same day.

  • HT4060 My iPad Mini and My iPhone 4s stopped charging when plugged into and outlet. On the same day and i've tried numerous adapters . It will charge when turned off only or plugged into a computer

    My iPad Mini and my iPhone 4s stopped charging on the same day when plugged into an outlet if they are turned on. My phone charged as long as it was turned off and it will charge when pluged into an USB port,
    Anyone else have this problem?

    Youngsavage6oo wrote:
    I have had my iphone 4s for only a couple months and it was charging fine and I unplugged it and when it got low I plugged it back in and wouldnt charge so I tried plugging it into the computer and its chargeing but I dont know what to do I need help
    Its charging, whats the issue then?

  • I am being charge repeatedly on the same day and r...

    I have just been notified in three emails that I have been charged $7, $14 and $35 in subscription renewals on the same day. I have not used Skype today, so either my account has been hacked or your system is broken. Please revert immediately and fix this, applying refunds. Thank you.

    Charmaine777 wrote:
    I have just been notified in three emails that I have been charged $7, $14 and $35 in subscription renewals on the same day.
    Hello
    Your account shows that these charges are not Subscription renewals. The $7 charge is an Auto-recharge on low credit balance and both the $14 and $35 charges are for credit purchases.
    Escalated within Skype for review.
    p.s. no duplicate posting please. Duplicate removed. Thank you.
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • Query with the days of a period and the same days of last year

    I need a help.
    We have a sales cube with daily values.
    We have a query that restricts a month (0CALMONTH) and shows the daily values for this month.
    No problem, we have only to put 0CALDAY on the line and the value on the columns.
    But we need also to show the values of the same days from last year.
    Example:
    The restricted month is july/2011.
    0CALDAY is on the line, so the query shows the values for
    01.07.2011   110,00
    02.07.2011   108,00
    31.07.2011   109,00
    How can we show in the same line the values for july/2011 and july/2010?
    Example:
             July/2010    July/2011
    01     95,00            110,00
    02     96,00            108,00
    31    94,00             109,00.
    Thanks in advance
    César Menezes

    Thanks for the answers until now.
    Surely a Day characteristic (ex. CA_DAY, derived from 0CALDAY) would work.
    But we have this requirement in many other cubes (I posted only an example) and it's not feasible to create this characteristic now.
    I understood the other suggestions, but the problem is not on selecting the values.
    We have two restricted key figures, one for a period (filled by the users) and another one for this period - 12.
    They work OK and bring the correct results.
    The problem is on presenting the results, because as we have 0CALDAY in the line the results appear on two different lines.
    Example:
    15.07.2010    950,00
    15.07.2011    980,00.
    Is ther any way to present the results in the same line?
    Example:
    15.07.2011    950,00 (last year)     980,00 (today)
    or
    15.07             950,00 (last year)     980,00 (today)
    or any other way?
    César

  • List of pm orders getting generated on the same day.

    Dear all,
    my problem is large nos of pm orders are generated on the same day for a particular equipment.
    some information regarding this are as follows:
    1) maintainance plant same for all the nos.
    2) order type is ZM11----->Preventive maintainance order
    please guide me how to proceed further in order to resove the issue.
    Regards,
    santosh.

    Now you have given 1-month as the call interval but, when you have scheduled in background, what is the time interval you have given for the batch job to run daily, weekly, monthly?
    Say you have given daily, system will run the job daily, will check for the plans, which are due within next 1 month (because of call interval), refer call horizon and then schedule it. So even if you have given 1-month in call interval, it depends how often you are actually scheduling it i.e. at what frequency are you running the back ground job. So it is daily, check for any plan, which is meeting these parameters i.e. call interval, next call due date and the call horizon, you will be able to see the call created tomorrow.
    Regards,
    Ketul

Maybe you are looking for