Ms-6309/do I have right bios?

bought this board off ebay...(I know)....I tried installing winxp & received all kinds of error code messages & can't be loaded messages & bsods.....so I tried loading win98 & received errors as well....I've tried different memory sticks, videocards,  underclocking so I thought I would try a bios flash as a last resort ...I'm wondering if I have the right bios installed that came with the board...as per a search at this forum between the pci slots on the mobo I have these markings   CE  ver:2      ms-6309    N1996 ...I assumed I had just a straight ms-6309 but the bios that loads shows this  A6309MS V3.2  12012000 ......wouldn't this be a bios for an ms-6309 lite?.....are the 6309 & 6309 lite ami bios flashes compatible/interchangeable?.....I've put alot of time & effort into this, I'd appreciate some help.....thanks alot
p3 933
128mb pc133

http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=127
sure its not that

Similar Messages

  • After I have download BIOS DISPLAY; DATED 02-10-2010, can not drag pictures or documents in CD/DVD

    I might have downloaded BIOS DISPLAY twice by mistake, since then I can not drag a picture in CD/DVD after inserted the disk. When I try to drag the picture, the computer is asking me "insert a writable disk,"  and the disk comes out before I paste the documents or pictures. Please help. I can not save anything right now.

    I might have downloaded BIOS DISPLAY twice by mistake, since then I can not drag a picture in CD/DVD after inserted the disk. When I try to drag the picture, the computer is asking me "insert a writable disk,"  and the disk comes out before I paste the documents or pictures. Please help. I can not save anything right now.

  • MSI 280x right Bios for batch

    Just realized there is a different bios for different batches of 280x , 
     I have two and they both have an SN  :  602 v277 28sb1311053874
    Whats the right bios for the cards?
    Can someone point me to the right and latest rom plz
    thx

    Use the attached for your cards.
    Then unpack the provided archive (330.rar) and put the included file (TV277MH.330) on that stick.
    Rename TV277MH.330 to 330.rom. Put the atiflash.exe also included in the archive on the USB stick too. Now boot from the stick.
    Type atiflash -p -f -noaper 0 330.rom [ENTER] and let it flash the vbios.

  • Do all MSI Nvidia 750 TI graphics card have hybrid bios?

    I have been advised to get a MSI Nvidia gtx 750 TI graphics card that has a hybrid bios switch as my HP pavilion has had compatibility issues with another graphics cards in the past. Im  having a look on Amazon but im really not sure what one to choose as i dont know which ones have hybrid bios. Do all MSI GTX 750 TI card have hybrid bios or only certain ones? Im really not very good when it comes to things like this and i want to make sure i get it right so i thought i would ask, hope you can help.
    Thanks Steve

    If the VGA card have hybrid bios, it will write on the product box.
    But since the website spec didn't mention it , I think it is better to ask the Amazon seller before you buy it...
    You can check >>MSI website for hybrid BIOS introduction<<...

  • How to make an user to have right to approve only one specific STS?

    In our BPS STS, we assign user A both on the highest level of one STS hierarchy B and on the lower level of another STS hierarchy C. And because in our real business planning process, A should only have right to approve STS B and can be approved by others in STS C, so we grant authorization "R_STS_SUP" to this user A, but then he has all the authorizations for approving or rejecting plans in both B and C. How to make this user only have authorization to approve STS B? Is there someone can kindly solve this problem? Thank you very much.

    Try to modify tunguska BSP application, OnInitialization handler for page frame.htm contains next code:
      AUTHORITY-CHECK OBJECT 'R_STS_SUP'
               ID 'ACTVT' FIELD '16'.
      IF sy-subrc NE 0.
        application->with_tree = ''.
      ELSE.
        application->with_tree = 'X'.
      ENDIF
    Try to add check for subplan/planning session here and in the case of B and C hierarchy set application->with_tree to blank value.

  • Why my Firefox v6.02 browser always open *.csv (comma delimited) file in another tab rather than downloading a file? I do not have right click option to save this file.

    My Firefox v6.02 browser always open *.csv (comma delimited) file in another tab rather than downloading a file? I do not have right click option to save this file. My OP is windows XP sp2.

    Hi mha007,
    Go to this site "http://www.nseindia.com/content/indices/ind_histvalues.htm"
    Select any Index type and from dates select just one day or any number of days. Click "Get Details" button. This will open tabular data on loaded page (with link CSV file link at bottom).
    When I click this link, it opens CSV file in new tab (in Firefox browser) and does not open download window (just as in case of other file formats like *.zip, *.rar or *.xls).
    Right-click of link does not give "save as" or "save file" option.
    Firefox is my preferred and default browser.
    ========
    surprisingly, When I do same thing in IE6 browser, data-table page shows 2 options below table, i.e. (1) download file (2) open file.

  • The icons on the screen of my laptop are too large. How can I make them smaller. I have right

    the icons on the screen of my laptop are much too large. I don't know how they got that way.  I want them to return to the smaller ones. I have right clicked on the desktop and clicked on making icons and other things smaller.  this made the items on the bar at the bottom much smaller but did nothing for the icons all over the screen. What else can I do.  I am using Windows 7  HP pavillion dv7 notebook

    Hi,
    Left click on an empty area of the Desktop to ensure it's the active window, then hold down the Ctrl key and use the scroll area of the Touchpad to adjust the size.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • I have an IPod Touch that is disabled. I can't connect it to ITunes becaus e the computer I synced it with cannot be used. How do I sync it to the computer I have right now?

         I have an IPod Touch that is disabled. I can't connect it to ITunes because the computer I synced it with cannot be used. How do I sync it to the computer I have right now without using the old one?

    polaricee1319 wrote:
         I have an IPod Touch that is disabled. ...
    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Once you have it resolved... have a look at this link...
    http://support.apple.com/kb/ht1766

  • Adobe X & IE9  "You don't have rights to save in this location"

    Installed adobe X on windows 7 32 bit with all windows and adobe updates.  Trying to print from IE9 using adobe as my printer.  This prints fine from local applications like Excel, Word, Quickbooks.  I created a new folder with full control C:\Temp and when trying to print there from IE9 I get the message "you dont' have rights to saave in this location".  I am logged in as an admistrator.  I changed all users on the PC to full control and even C:\ on the security tab.  This will print to the "Users\" folder only.  Spent hours trying suggestions from discussion sites.  Help!!
    Thanks,

    Thanks for your reply.  Security level set to Medium by default.  When I uncheck the "Enable Protected Mode"  it works. I can save files to folders on my computer.   I tried this before.   If I unable protected mode I compromise my security and it is easier for malicious software being installed to my computer.  Any suggestions?

  • Reviewer have rights for two regions,once he logged-in after the User promotion then corresponding region selected as default

    Hi Experts,
    My doubt is about Hyperion Workflow Process Management.
    Scenario : User-A promoting the budget unit to Reviewer-A.
    User-A : Have rights to enter the budget unit for the region New York.
    Reviewer-A : Have rights to review the budget unit for the regions New York, California.
    Doubt : If the User-A entered the budget unit for New York and it will be promoted to Reviewer-A.
    When the Reviewer-A log-in to the planning unit which was promoted by User-A, by default the
    Entity mentioned in the POV should be displayed as New York even though the reviewer have rights for reviewing both the region [New York, California]
    Note : Once user-A promoted then I logged-in to that planning unit as a Reviewer-A, by default California was selected (instead of New York) as a Entity mentioned in the POV.
    Kindly guide me how to select New York as a Entity mentioned in the POV by default

    It's good to hear that your issue is progressing.
    Frustrating though it is, I have a certain amount of sympathy with BT because they are totally dependent upon Openreach to handle the faults. It would be the same if your phone service was provided by Sky or anyone else. Openreach have to do the technical stuff and, from my experience, their systems do not seem to be geared up for dealng with the general public and this is why they don't care about missing appointments or just turning up on spec. They have a monopoly and can please themselves because their customer is BT and not you or me.
    I find having to go through a call centre frustrating because the people you speak to are not connected at all with the people with the technical knowledge. I have been told many different tales by these people after thay have checked with the engineering department and phoned me back. I even got two completely different versions of what was happening with my phone when I disagreed with what they told me the first time and they referred it back to them again. Someone was making it up - I don't know who. Also you never talk to the same person twice. I think BT could improve this aspect although this is a common problem with large businesses these days.
    I live in hope that this will be sorted out soon.
    Tony

  • How can i Update Bios of HP DC7800, I have old Bios version of 2007.

    How can i Update Bios of HP DC7800, I have old Bios version of 2007.

    To find your updates page start here- choose which DC 7800 you have, on next page choose OS- then you will land on driver/software page.
    http://h10025.www1.hp.com/ewfrf/wc/pfinder?cc=us&lc=en&query=DC+7800&tool=s-002&dlc=en#Z7_LAI0GH40KG...
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • You do not have rights to access the data in the universe - WIS 00505

    Hello,
    Trying to create my firs WebI report above Universe, I entered the InfoView, and selected new Web Intelligence report. After drug and drop the objects I want to display, when I press the run query button I get the message "you do not have rights to access the data in the universe .Contact BO Administrator Error WIS 00505". I already implemented note number 1299687.
    What can it be?
    Thanks,
    David

    Hi David,
    please make sure that the BOBJ user you are using to create the report has appropriate rights on your universe AND the underlying connection. You can set the authorization for this kind of objects in the CMC under Universes and under Connections .
    Regards,
    Stratos

  • U400 - dont have rights to dvd burner?

    I just got a new u400 today. The first thing I did was try to make a recovery disk. The first disk burned, then when I tried the second disk I got a message saying that there was no dvd burner or I dont have rights to the dvd burner. All subsequent attempts to burn the disk showed the same message. Anybody got any ideas? Thx.

    Hi
    Welcome To Lenovo Community
    Please try updating windows OKR software
    http://support.lenovo.com/en_US/downloads/detail.p​age?DocID=DS027948
    Hope This Helps
    Cheers!!!
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with Kudos!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!  This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

  • My apple id keeps saying is blocked i cant get through i have right id abd right password

    Cannot download apps with itunes credit apple id kerps saying is blocked i have right password so how do i fix it

    Hi,
    This is about the type of APple ID that is also a Valid AIM Screen Name.
    Apple's Agreement with AIM was originally for the @mac.com ending names issued under the .Mac service (pre MobileMe) and then later the MobileMe issued @me.com IDs.
    When MobileMe started Apple changed the registration page for @mac.com names to be "iChat names"  (Under @mac.com all names worked "forever" in iChat (Trial Accounts, Paid for account or Lapsed accounts)
    The Trial and Lapsed accounts no longer worked as email addresses but will work with iChat. (Therefore a small step to keep issuing the names).
    NOTE: 
    You cannot create a new Apple ID whilst using the email already linked to another one.
    An @mac.com name is a New Apple ID.
    The MobileMe @Me.com issued names work in all iChat versions.
    Later @me.com names issued via iCloud only work with iChat 6  (iChat makes a dual Login to AIM and Me.com so that the Password can be verified)
    In All Cases the password has to be 16 characters or less due to the limit at the AIM server end (despite Apple trying to get you to make them longer).
    My Apple ID is, like yours, an email from somewhere else.  In my case it is an old Dial-up Account I used to have.
    An Alternative to to register the Email Address with AIM's Registration Page (Or just use it a Security, Password and Confirmation address).
    At the end of the day it is about whether you want a separate ID or not.
    9:02 PM      Saturday; January 14, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • I cannot access itunes on my pc. It says itunes is locked, locked on a disk, don't have right permissions

    I cannot access itunes on my pc. It says itunes is locked, locked on a disks, don't have right permissions.

    Since this question is related to an issue with iTunes, I would post this in the iTunes forums.
    https://discussions.apple.com/community/itunes
    B-rock

Maybe you are looking for