MS 6533 & adding 256 DDR PC2100

Hi guys, can someone help me with this RAM problem. Whan I put together this machine I installed one Crucial 256 MB DDR PC2100 chip. Then I purchased a second chip a few months later. Ahen I added the second one in the remaining slot, the machine continues to detect only 256MB, one of the two slots does not seem to be seeing the chip, because when I use either of the 2 chips in the other slot, iit works fine. Any suggestions?

you can use this one
[email protected]
Thanx
Quote
Originally posted by Assaf
Quote
Originally posted by mmragheb
Yep...
I sent you an email (about 1MB).
/EDIT/
It bounced back due to an overloaded mailbox.
I need another address or free up 1.06MB in the hotmail box.

Similar Messages

Ddr Pc2100

A few months ago i've posted a combination of ddr modules on a km2m, it was nice because the two modules were from known brands such as amd and kingston, but now the story is different:
actual configuration:
athlon xp 2000+ (oc'ed up to 1925mhz)
ddr 256 pc2100U kingston CL 2.5
ddr 128 pc2100U "unknown" CL 2.5 (the amd bank was pc2700 or 333 cl 2)
mobo km2m combo-L
psu 300W unknown brand
hdd maxtor 40Gb max diamond plus 8
cdrw optorite
1 side fan 12v 18amps
2 rear fans 12v 18 amps
Ok now my problem, with the same conf as before (when using the 128 amd module), i'm getting a lot of errors in memtest86. This is the second mem module i'm testing (previous one was returned) i know it isn't a defective module so this gotta be some bios configuration or maybe the new 128 module its not as good as the 256 kingston module, but what i find more bizzare is that i ran a test over the 128 module on a pcchips mobo with a p4 and it was ok with the same conf.
Some ideas? recomended bios configuration using 1t clk?
thanks in advance

Sorry for the delay to answer, i have good news and bad news, i'll tel the good ones first, my actual configuration is working ok so far with no errors:
dram clock --- 133
dram timing --- manual
dram cas latency --- 2.5 (if i change it the system is still stable but no difference)
bank interleave --- 4bank
precharge to active --- 2t
active to precharge --- 5t
active to cmd --- 2t
dram command rate --- 2t
ok that is the configuration that is actually working but the bad and sad news is that the speed has decreased for about 200Mhz (from 709Mhz to 524Mhz) so now the oc i've made has gone to hell, and the only setting that i have to change to get the 700Mhz is dram command rate but every time i do this memtest86 drops a consecutive list of at least 1200 errors in test 5 and some more in 11.
Any suggestion, please be creative :P.
Thanks in advance

Adding 256 SSD to a new iMAC

History: I have just recently sold my old 2010 Mac book Pro and kept the SSD that came with it and and currently looking to buy the 27-inch iMac and befor i buy it i was wondering if my SSD i have would work as a second HD i can add to it once i get it. I would preffer to have my Mac boot up on the SSD (and other programs) and have all my personal file (like Pictures, movies, word doc...ext) on the standered 1T HD.
This is what i am looking to get:
3.4GHz Quad-Core Intel Core i7
4GB 1333MHz DDR3 SDRAM - 2x2GB
1TB Serial ATA Drive
AMD Radeon HD 6970M 2GB GDDR5
Magic Trackpad
Apple Keyboard with Numeric Keypad (English) & User's Guide
I know i can upgrade the Memery to 16G RAM and how to do it myself. I need to know if the SSD that i have (originaly installed by Apple on my Mac book pro) will work without having problems? Also will i be able to do this myself or will i need to go to apple to open up the iMac to do it for me. if so will apple install a SSD if i bring it in or must i buy a new one with them?

You asked; " if so will apple install a SSD if i bring it in or must i buy a new one with them?"
You are are going to have to ask at the store. I know here in my local area that they is one store that will do just about anything while another is not so willing to do anything with the Macs. It appears to be pretty much dependen on the Apple Store and the personal they have to do the work.
Allan

Halo geforce fx 5900 ultra 256 ddr

hi,
i'm having a big prob with this game trying to run it on my system :(.
each time i want to run halo on my pc, i get the following message : "Halo - Fatal error. Couldn't initialize direct3D accelaration. it may be disabled, pls run DXDIAG."
i've already done that and it is enabled and i've also ran the directX tests, and they are all fine, i have directX 9.0b...i've also reinstalled Halo, didnt solve the prob, also reinstalled detonator drivers, also didnt solve the prob...
what more can i do ?
msi 875p neo-fis2r
p4 2.6 Ghz (HT)
2x256 mb ddr400
80 gb sata-150
geforce fx 5900 ultra 256ddr

I also had problems with Halo. I downloaded the Det 52.13 beta drivers and everything works now. Also, Halo runs much much faster with these drivers. You can find them here:
http://www.3dchipset.com/drivers/beta/nvidia/nt5/5213.php

[845 Series] MS-6541

Hi,
I install an motherboard MS-6541 in a new pc, but it does star. I Have intel p4 2.48ghz 512/533 with 256 ddr pc2100 (266).
I need a manual of MS-6541, someone can help me, please?
Thanks

intel MS6541 ver2.1 that comes from a desktop Compaq EVO 310

Msi km4m-v xp setup problems

I have just installed a new mobo to my system.
I have loaded default bios settings
The board will post ok and see my hard drive and dvd rw
it will the start to load win xp from cd rom
it gets to the point where it says SETUP IS STARTING WINDOWS and hangs
I have tried to run maxtors diagnostics tool and this cannot see any ide devices.
system
Athlon xp 2200
256 ddr pc2100 ram
pioneer 106 dvd rw
maxtor 30g hdd
msi km4m-v (ms -7061 ver 1.0 )
bios v1.2
the hdd is on its own cable on the primary hdd and configured as master
the dvd rw is secondary master
i have swapped cables. no change
i have removed the dvd rw. no change
i have put all components on to another board and they all work fine, i have also run power max on the hard drive with another board and this has low level formatted ok and verifyed that the disk is ok.
i tried turning off usb in the bios still no change
can you offer any help
thanks

You're welcome dude!
Here you can see the whole post that I've made when I was having troubles installing XP on my KM4M-V, also check that my old PSU was only 16a in 12V rail: KM4M-V Can't install...
Quote
can anyone please explain to me why this board seems to work fine with win ME loaded but has this problem with XP.
I can't be shure, but I guess that XP try to load a lot of components in memory while installing, also this can make the installation crashes because of memory is not getting enough power... That's only my guess, and I know I can be totally wrong... Any other ideas guys?
Here is a very good reading for PSU : Power Supply Guide
Also you can "caculate" here but it's only a reference but will help you a little: PSU calculator

KT266 Pro2 Blue Screen.. via chips??

everytime i try to run a program, more specifically, games; IE: WarCraft 3, Command & Conquer: Generals, or n/ething that requires Direct X (my speculation) when i quit the game (and only when i quit the game) i get this gay blue screen in windows 2000 (and it was in XP also) that says "IRQ NOT... " something something, i'm not sure, all iget is the IRQ part about my AGP controller? or VIA chipset?
can someone please tell me how 2 fix it, and i have the via drivers installed, and videocard drivers updated
Rig:
AMD Athlon T-Bird 1.333 Ghz @ 266 FSB
MSI K7T-266 Pro2 w/ Via
ATi All In Wonder Radeon 32 Meg DDR Ram
256 DDR PC2100 Ram
NEC 16X DVD
MSI 40x12x48 CD-RW (defective BTW!! grrr)
Quantum 40 Gig 7200 RPM HD

http://www.msi.com.tw/program/service/forum/index.php?threadid=1131&boardid=13&styleid=1

No boot... no food

I have just finished to setup my new motherboard (msi 875 Neo).. X( Pc is not boot .. the reason says keyboard controller...
My PC {
2.6 Intel 800
2x 256 ddr pc2100 (samsung)
msi 5600 vtdr 128 mb
Is there anybody out there?
plz! reply me...

I'm pretty sure that with a 800Mhz FSB you need DDR333 at least.
If you have any way of getting some faster RAM to test with you should try it.

HELP PLZZZZZZZZ

I recently replaced my old mb ram and processor. with a msi k7t266 pro2-a with 256 ddr pc2100 ram and a athlon xp 1800. I am now experiencing stuttering or choppyness while playing the bf 1942 demo on the ea servers but it is ok ibn the single player. I have cable internet and am playing on a t-1 server. There should be no lag so i don't think that is it. I have dled all the latest drivers for the card and such even formatting my hd trying to figure this out. I have a 64 mb nvidea gforve2 mx400. The game played fine with my old board and have no idea what to do now. Please help me i desperately need this solved.
Msi k7t266 pro2-a
256 ddr pc2100
athlon xp 1800
17 inch mnonitor
win 98
64 mb nvidea geforce2 mx400
20 gig hd
pci 128 sb sound card
32*10*40 lg burner :(

I'd Say, between using windows 98, a VIA chipset, and the g2mx400, your askin' for trouble online .
If turning down the video details doesnt fix it, then I recomend selecting 22k modem instead of cable/dsl in the network properties. :]
and If its still jumpy, You need to join smaller games cause your system is cloged and cant handle the netstream, as well as pushing the g2 through that game. 8o
Even my game stutters on a map with 31 other people who are kickn' ass. So im not suprised yours is jumpy too.

Bad version BIOS???

I am upgrade BIOS to v.5.00 / support my processor E6/
CPU Tepmperature 21-29 C
System temperature 39 C
Is it swap???
Application Corecenter crash in blue screen / error rushtop.Sys/.Cool and Quiet disabled. This is problem have already been in this forum by few users, reply not....
Application Vcore open and in second close.
I guess that BIOS is bad.
New or old version replace?
Thank you for reply.
I have
AMD Sempron 2600+ 64-bit E6
MSI K8T NEO-V 7032 latest Bios
256 DDR PC2100 CL2.5
GF4 440SE 64MB
Latest MB drivers.
WiNXP Professional / no service pack/ + W98SE.

Hello !!
Sorry but i do not understand exactly what you are saying.
Does your system post, boot and is it loading your OS ?
Why are you gessing that Bios is dead ?
Why are you mentioning Corecenter ?
Please give us some more detailed information on what exactly is going on.
Greetz MurdoK

Got the msi 645 ultra c

just upgraded (on my old dell dimension xps t700r) to a pent 4 2.0 ghz from a pent 3 700mhz and i had to buy a new power supply and a new motherboard. after hookin all the supplies up, i cant seem to find where something goes. there is a cord that runs from the power button on the front of the computer to the motherboard, but on this motherboard i cannot find where to hook this cord to, can somebody please help me!! ?(
pent 4 2.0gig
msi 645 ultra c
geforce 4 ti4200
2 30gig wd hard drives
256 ddr pc2100 ram

Hi,
Read the manual that came with your motherboard, it tells you were to connect the power button. Or, if that doesn't help you, I think you're better out turning your computer in at a service shop and let a trained technician do the work for you. 8)
Quote
Originally posted by golfer
just upgraded (on my old dell dimension xps t700r) to a pent 4 2.0 ghz from a pent 3 700mhz and i had to buy a new power supply and a new motherboard. after hookin all the supplies up, i cant seem to find where something goes. there is a cord that runs from the power button on the front of the computer to the motherboard, but on this motherboard i cannot find where to hook this cord to, can somebody please help me!! ?(
pent 4 2.0gig
msi 645 ultra c
geforce 4 ti4200
2 30gig wd hard drives
256 ddr pc2100 ram

PSU Question

I've read a lot in the forum about weak power supplies causing a lot of problems. I honestly don't know too much about PSUs, but this is what I have:
AHEAD Model SH-350 Version 2.03
350W Max
3.3V @ 28A
5V @ 32A
Combined 220W
Can somebody tell me if this is sufficient or any good? If not, any suggestions on a new one?
BTW, I've also had problems with certain games (WC3, The Sims, etc) crashing to the desktop. At the time of the problems I was running this:
Asus A7A266 MoBo
1.4 Athlon
256MB DDR PC2100
5400RPM 30Gig
DVD-Rom
CD-RW
Sound Blaster Live! Value
Radeon VE 32MB (don't worry, my TI4200 will arrive tomorrow)
Win98 SE
Under those conditions, do you think my power supply was the problem?
I am currently doing some upgrades:
120GB Maxtor 7200 8MB HDD
additional 256 DDR PC2100
48X CD-RW
MSI GF4 TI-4200 TD8X-64
WinXP Pro
Hopefully these upgrades will solve my crashing problem. But does anyone see a potential problem with my PSU after those upgrades?
Thank you for all your help!

I do not have a link to the maker. I purchased my computer from CyberPower Inc. with a 350W PSU...I did not have the option of choosing a brand.
But I take it that brand is important?

AMD 2000+ TB core & PC2100 DDR mem

I just installed an AMD XP 2000+ processor with a T-Bred core. I also installed some DDR pc2100 memory. What should I set my bios to in order to make sure this thing is running as fast as possible? Do I set the CPU FSB to 266mhz and then is there anything I need to do to make sure the RAM is running at the same speed? Lastly, the retail box the proc came in says it runs at 1.667 Ghz. WHen I check it in the Core Center, it says it's running at like 1.2xx Ghz. What gives?

Dude... thanks... that fixed like almost all of my problems. Now the bios start up screen appears and now CoreCenter reports 1.667 Ghz! Thanks again.... is there anything I need to do to my RAM now?

6533 motherboard

Hi Guys I`m a complete newb, but would love some help.
I`m thinking of buying, a new pc,
Its a pentium 4, 3.06ghz, SIS 645 chipset on a MSI 6533 motherboard, 2700 DDR ram.
But when I downloaded the motherboard manual, it says
Supports 1.5GHz, 1.6GHz, 1.7GHz, 1.8GHz, 1.9GHz, 2GHz and up.
How do I know how far up, because when I check the cpu support I get
Pentium 4 Willamette 1.4G 400 14 OK
Pentium 4 Willamette 1.5G 400 15 OK
Pentium 4 Willamette 1.6G 400 16 OK
Pentium 4 Willamette 1.7G 400 17 OK
Pentium 4 Willamette 1.8G 400 18 OK
Pentium 4 Willamette 1.9G 400 19 OK
Pentium 4 Willamette 2.0G 400 20 OK
Pentium 4 Northwood 1.5G 400 15 OK
Pentium 4 Northwood 1.6G 400 16 OK
Pentium 4 Northwood 1.7G 400 17 OK
Pentium 4 Northwood 1.8G 400 18 OK
Pentium 4 Northwood 1.9G 400 19 OK
Pentium 4 Northwood 2.0G 400 20 OK
Pentium 4 Northwood 2.1G 400 21 OK
Pentium 4 Northwood 2.2G 400 22 OK
Pentium 4 Northwood 2.4G 400 24 OK
Pentium 4 Northwood 2.5G 400 25 OK
Pentium 4 Northwood 2.6G 400 26 OK
Pentium 4 Northwood 2.26G 533 17 NO
Pentium 4 Northwood 2.4G 533 18 NO
Pentium 4 Northwood 2.53G 533 19 NO
Pentium 4 Northwood 2.66G 533 20 NO
Pentium 4 Northwood 2.8G 533 21 NO
Pentium 4 Northwood 3.06G 533 23 NO
why does it say no for everything above 2.6ghz, and no for all the 533 speed chips, is this because its a northwood chip in the test, or would you assume its not meant to support a 3.06ghz/533 speed, pentium 4 chip?
The pc store selling them said they have sold heaps, so I`m wondering if
1: they are pushing the motherboard beyond its limits
2: there is a bios update that enables it
3: or the info in the MSI CPU support has not been updated?
would appreciate any suggestions.

Hi Assaf, I have spent another couple of months looking and researching,(after your advice), for the best PC to get for my money.
I have come up with this system built by RK Datastore. Could you let me know what you think please.
* Mitsubishi Diamond View 19inch 1998FDB (Black) - $409
· CSXSonata - """Antec""(USA) Top Quality ""Sonata""
QUIET Black Miditower Case,380Watt TruePower PSU,
16.75""(H) x 18.25""(D) x 8.13""(W), Cooling System
- up to 2x120mm Fans (1x rear - standard), 1x front -
optional),Front mounted Audio, USB & IEEE1394
(FireWire) ports, Wa" - $219
· P4C800 DELUXE i875P DUAL - DDR400 - SATA-1394
GigaLAN - RAID - $317
· P4-2.4Ghz/512K/0.13u/S478/800MhzFSB/HYPER THREADING
READY - $310
· 2 sticks of VS256MB400 - "256MB PC-3200 (400MHz) DDRAM
Corsair ""VALUE SELECT""(USA), CAS 2.5, Lifetime
warranty" - $190(for both)
· WD 80GB 7200RPM 8MB UATA/100 HDD (3 YEAR WARRANTY) - $155
· LITEON "48XCDR,24XCRW,48XCDREAD,16XDVD,IDE,NERO5.5+ - $92
· 1.44 FDD - $15
· Internal 56k modem - $20
· ATI Sapphire Radeon 9700 Pro Ultimate - 128M DDR -
256bit memory - VIVO+ DVI- 8XAGP - core clk 325 -
memclk 620 - 8x pipelines - 256 Bit DDR bus - $572
(They tell me the 9700 is now out of production and
this seems a reasonable price for the Pro Ultimate)
· Creative SBS250 2.1 Speakers - $38
· Microsoft Internet Keyboard and OpticalMouse, valuepack - $50
· XP Home Edition - $185
· Freight - $120 (from victoria to kangaroo Island)
Total - $2692 (Discount given on some items)
As you can see I have gone a little over my budget, of $2500, but have saved a little extra money in last 2 months, hahaha, but I am now hanging out for it, hehehe
So if you could offer your opinion on the system, and let me know if their are any components that you dont like for some reason or other, I would be very appreciative, Thanks for your time, and Cheers guys Mad_Dan

845e ht ready and pc 2100 200/266 mhz 256 mb memmory module(s)

Hi all i am experiencing this problem on all my mainboards as described in the title, here it is:
Bios recognizes only 128 Mb of Ram no matter if they are 1 or 2 (same kind of modules), i tried BIOS update too.
The weird thing it's that it's happening on all my mainboards of this kind but when i'm trying the same memory modules on MSI VIA chipset based mainboards it all works fine.
Thank you in advance for your replies

motherboard is MS-65663 ver 2
Here is the report generated by AIDA, i cutted off the stuff about the OS because it is too long if you need it i will post it in the reply if asked:
--------[ AIDA32 (c) 1995-2004 Tamas Miklos ]---------------------------------------------------------------------------
Version AIDA32 v3.93
Author [email protected]
Homepage http://www.aida32.hu
Report Type Report Wizard
Computer MARIUS
Generator M
Operating System Microsoft Windows XP Professional 5.1.2600 (WinXP Retail)
Date 2004-03-18
Time 01:06
--------[ Summary ]-----------------------------------------------------------------------------------------------------
Computer:
Operating System Microsoft Windows XP Professional
OS Service Pack None
Internet Explorer 6.0.2600.0000 (IE 6.0 - Windows XP)
Computer Name MARIUS
User Name M
Logon Domain MARIUS
Motherboard:
CPU Type Intel Celeron 4A, 2400 MHz (6 x 400)
Motherboard Name MSI 845E Max (MS-6566E) (6 PCI, 1 AGP, 1 CNR, 2 DIMM)
Motherboard Chipset Intel Brookdale i845E
System Memory 128 MB (PC2100 DDR SDRAM)
BIOS Type AMI (09/01/03)
Communication Port Communications Port (COM1)
Communication Port Communications Port (COM2)
Communication Port ECP Printer Port (LPT1)
Display:
Video Adapter Inno3D GeForce4 MX 440 with AGP8X (64 MB)
3D Accelerator nVIDIA GeForce4 MX 440 with AGP8X
Multimedia:
Audio Adapter Intel 82801DB(M) ICH4(-M) - AC'97 Audio Controller [B-0]
Storage:
Floppy Drive Floppy disk drive
Disk Drive SAMSUNG SP0401N
Optical Drive SONY CD-RW CRX230E
Partitions:
C: (FAT32) 4994 MB (3712 MB free)
D: (FAT32) 33188 MB (10932 MB free)
Input:
Keyboard Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
Mouse PS/2 Compatible Mouse
Network:
Primary IP Address 217.10.212.188
Primary MAC Address 00-10-4B-6A-16-1D
Network Adapter 3Com EtherLink XL 10/100 PCI TX NIC (3C905B-TX) (217.10.212.188)
--------[ DMI ]---------------------------------------------------------------------------------------------------------
[ BIOS ]
BIOS Properties:
Vendor American Megatrends Inc.
Version 07.00T
Release Date 04/02/01
Size 512 KB
Boot Devices Floppy Disk, Hard Disk, CD-ROM, ATAPI ZIP, LS-120
Capabilities Flash BIOS, Shadow BIOS, Selectable Boot, EDD, BBS
Supported Standards DMI, APM, ACPI, ESCD, PnP
Expansion Capabilities ISA, PCI, AGP, USB
[ System ]
System Properties:
Manufacturer Micro-Star Inc.
Product MS-6566E
Version 1.0
Serial Number 00000000
Wake-Up Type Modem Ring
[ Motherboard ]
Motherboard Properties:
Manufacturer Micro-Star Inc.
Product MS-6566E
Version 1.0
Serial Number 00000000
[ Chassis ]
Chassis Properties:
Manufacturer Uknown Chassis Manufacture
Version Version 1.00
Serial Number 123456890
Asset Tag 0123ABC
Chassis Type Desktop Case
[ Memory Controller ]
Memory Controller Properties:
Error Detection Method None
Supported Memory Interleave 1-Way
Current Memory Interleave 1-Way
Supported Memory Types DIMM, SDRAM
Supported Memory Voltages 3.3V
Maximum Memory Module Size 1024 MB
Memory Slots 2
[ Processors / Intel(R) Pentium(R) 4 Processor ]
Processor Properties:
Manufacturer Intel
Version Intel(R) Pentium(R) 4 Processor
External Clock 100 MHz
Maximum Clock 3000 MHz
Current Clock 2400 MHz
Type Central Processor
Voltage 3.3 V, 2.9 V
Status Enabled
Socket Designation FC-478
[ Caches / Internal Cache ]
Cache Properties:
Type Internal
Speed 40 ns
Status Enabled
Operational Mode Write-Back
Associativity 4-way Set-Associative
Maximum Size 1024 KB
Installed Size 8 KB
Supported SRAM Type Synchronous
Current SRAM Type Synchronous, Pipeline Burst
Error Correction Single-bit ECC
Socket Designation Internal Cache
[ Caches / Internal Cache ]
Cache Properties:
Type Internal
Speed 40 ns
Status Enabled
Operational Mode Write-Back
Maximum Size 1024 KB
Installed Size 128 KB
Supported SRAM Type Synchronous
Current SRAM Type Synchronous
Error Correction Parity
Socket Designation Internal Cache
[ Memory Modules / DIMM1 ]
Memory Module Properties:
Socket Designation DIMM1
Type DIMM, SDRAM
Installed Size 512 MB
Enabled Size 512 MB
[ Memory Modules / DIMM2 ]
Memory Module Properties:
Socket Designation DIMM2
Installed Size Not Installed
Enabled Size Not Installed
[ System Slots / PCI1 ]
System Slot Properties:
Slot Designation PCI1
Type PCI
Usage Empty
Data Bus Width 32-bit
Length Long
[ System Slots / PCI2 ]
System Slot Properties:
Slot Designation PCI2
Type PCI
Usage In Use
Data Bus Width 32-bit
Length Long
[ System Slots / PCI3 ]
System Slot Properties:
Slot Designation PCI3
Type PCI
Usage Empty
Data Bus Width 32-bit
Length Long
[ System Slots / PCI4 ]
System Slot Properties:
Slot Designation PCI4
Type PCI
Usage Empty
Data Bus Width 32-bit
Length Long
[ System Slots / PCI5 ]
System Slot Properties:
Slot Designation PCI5
Type PCI
Usage Empty
Data Bus Width 32-bit
Length Long
[ System Slots / PCI6 ]
System Slot Properties:
Slot Designation PCI6
Type PCI
Usage Empty
Data Bus Width 32-bit
Length Long
[ System Slots / AGP ]
System Slot Properties:
Slot Designation AGP
Type PCI
Usage Empty
Data Bus Width 32-bit
Length Long
[ System Slots / CNR ]
System Slot Properties:
Slot Designation CNR
Type PCI
Usage Empty
Data Bus Width 32-bit
Length Long
[ Port Connectors / Def ]
Port Connector Properties:
Port Type SSA SCSI
Internal Reference Designator USB
Internal Connector Type Mini-Centronics
External Reference Designator Def
External Connector Type DB-25 pin male
--------[ Sensor ]------------------------------------------------------------------------------------------------------
Sensor Properties:
Sensor Type Winbond W83627HF
Sensor Access ISA 290h
Temperatures:
Motherboard 24 °C (75 °F)
CPU 20 °C (68 °F)
Cooling Fans:
CPU 2596 RPM
Voltage Values:
CPU Core 1.49 V
CPU Aux 1.82 V
+3.3 V 3.26 V
+5 V 5.19 V
+12 V 11.98 V
-12 V -12.36 V
-5 V -5.25 V
+5 V Standby 5.04 V
VBAT Battery 3.09 V
Debug Info 5D 72 CC C1 C5 1F 31 18 FF FF 41 64 (01)
--------[ CPU ]---------------------------------------------------------------------------------------------------------
CPU Properties:
CPU Type Intel Celeron 4A, 2400 MHz (6 x 400)
CPU Alias Northwood-128
CPU Stepping D1
Original Clock 2400 MHz
L1 Trace Cache 12K Instructions
L1 Data Cache 8 KB
L2 Cache 128 KB (On-Die, ATC, Full-Speed)
CPU Physical Info:
Package Type 478 Pin uPGA
Package Size 3.50 cm x 3.50 cm
Transistors 55 million
Process Technology 6M, 0.13 um, CMOS, Cu, Low-K
Die Size 131 mm2
Core Voltage 1.475 - 1.55 V
I/O Voltage 1.475 - 1.55 V
Typical Power 38.7 - 82 W (depending on clock speed)
Maximum Power 49 - 103 W (depending on clock speed)
CPU Manufacturer:
Company Name Intel Corporation
Product Information http://www.intel.com/products/browse/processor.htm
CPU Utilization:
CPU #1 100 %
--------[ CPUID ]-------------------------------------------------------------------------------------------------------
CPUID Properties:
CPUID Manufacturer GenuineIntel
CPUID CPU Name Intel(R) Celeron(R) CPU 2.40GHz
CPUID Revision 0F29h
IA Brand ID 0Ah (Intel Celeron 4)
Platform ID 0Fh (Socket 478)
IA CPU Serial Number Unknown
Instruction Set:
AMD 3DNow! Not Supported
AMD 3DNow! Professional Not Supported
AMD Enhanced 3DNow! Not Supported
AMD Extended MMX Not Supported
AMD64 Not Supported
Cyrix Extended MMX Not Supported
IA-64 Not Supported
IA MMX Supported
IA SSE Supported
IA SSE 2 Supported
IA SSE 3 Not Supported
CLFLUSH Instruction Supported
CMPXCHG8B Instruction Supported
CMPXCHG16B Instruction Not Supported
Conditional Move Instruction Supported
FEMMS Instruction Not Supported
MONITOR / MWAIT Instruction Not Supported
CPUID Features:
36-bit Page Size Extension Supported
Advanced Cryptography Engine Not Supported
Alternate Instruction Set Not Supported
Automatic Clock Control Supported
CPL Qualified Debug Store Not Supported
Debug Trace Store Supported
Debugging Extension Supported
Enhanced SpeedStep Technology Not Supported
Fast Save & Restore Supported
Fast System Call Supported
Hyper-Threading Technology Not Supported
L1 Context ID Supported
Local APIC On Chip Supported
LongRun Not Supported
LongRun Table Interface Not Supported
Machine-Check Architecture Supported
Machine-Check Exception Supported
Memory Type Range Registers Supported
Model Specific Registers Supported
No-Execute Page Protection Not Supported
Page Attribute Table Supported
Page Global Extension Supported
Page Size Extension Supported
Pending Break Event Supported
Physical Address Extension Supported
Processor Duty Cycle Control Supported
Processor Serial Number Not Supported
Random Number Generator Not Supported
Self-Snoop Supported
Thermal Monitor Supported
Thermal Monitor 2 Not Supported
Time Stamp Counter Supported
Virtual Mode Extension Supported
CPUID Registers:
CPUID 00000000 00000002-756E6547-6C65746E-49656E69
CPUID 00000001 00000F29-0001080A-00004400-BFEBFBFF
CPUID 00000002 665B5101-00000000-00000000-003B7040
CPUID 80000000 80000004-00000000-00000000-00000000
CPUID 80000001 00000000-00000000-00000000-00000000
CPUID 80000002 20202020-20202020-20202020-20202020
CPUID 80000003 65746E49-2952286C-6C654320-6E6F7265
CPUID 80000004 20295228-20555043-30342E32-007A4847
MSR 00000017 000A-0000-0000-0000
MSR 0000002C 0000-0000-1810-0018
--------[ Motherboard ]-------------------------------------------------------------------------------------------------
Motherboard Properties:
Motherboard ID 62-5900-001169-00101111-040201-I845E$16566E00A6566IMS V5.9 090103
Motherboard Name MSI 845E Max (MS-6566E)
Front Side Bus Properties:
Bus Type Intel NetBurst
Bus Width 64-bit
Real Clock 100 MHz (QDR)
Effective Clock 400 MHz
Bandwidth 3200 MB/s
Memory Bus Properties:
Bus Type DDR SDRAM
Bus Width 64-bit
Real Clock 133 MHz (DDR)
Effective Clock 267 MHz
Bandwidth 2133 MB/s
Chipset Bus Properties:
Bus Type Intel Hub Interface
Bus Width 8-bit
Real Clock 67 MHz (QDR)
Effective Clock 267 MHz
Bandwidth 267 MB/s
Motherboard Physical Info:
CPU Sockets/Slots 1
Expansion Slots 6 PCI, 1 AGP, 1 CNR
RAM Slots 2 DIMM
Form Factor ATX
Motherboard Size 200 mm x 300 mm
Motherboard Chipset i845E
Extra Features Fuzzy Logic 4
Motherboard Manufacturer:
Company Name Micro-Star International
Product Information http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_list.php
BIOS Download http://www.msi.com.tw/program/support/bios/bos/spt_bos_list.php
--------[ Memory ]------------------------------------------------------------------------------------------------------
Physical Memory:
Total 127 MB
Used 75 MB
Free 51 MB
Utilization 59 %
Swap Space:
Total 307 MB
Used 144 MB
Free 163 MB
Utilization 47 %
Virtual Memory:
Total 435 MB
Used 220 MB
Free 215 MB
Utilization 51 %
Problems & Suggestions:
Suggestion Install more system memory to improve applications performance.
--------[ SPD ]---------------------------------------------------------------------------------------------------------
[ 256 MB PC2100 DDR SDRAM ]
Memory Module Properties:
Serial Number 00303430h
Module Size 256 MB (1 rows, 4 banks)
Module Type Unbuffered
Memory Type DDR SDRAM
Memory Speed PC2100 (133 MHz)
Module Width 64 bit
Module Voltage SSTL 2.5
Error Detection Method None
Refresh Rate Normal (15.625 us), Self-Refresh
Highest CAS Latency 2.5 (7.5 ns @ 133 MHz)
2nd Highest CAS Latency 2.0 (10.0 ns @ 100 MHz)
Memory Module Features:
Early RAS# Precharge Not Supported
Auto-Precharge Not Supported
Precharge All Not Supported
Write1/Read Burst Not Supported
Buffered Address/Control Inputs Not Supported
Registered Address/Control Inputs Not Supported
On-Card PLL (Clock) Not Supported
Buffered DQMB Inputs Not Supported
Registered DQMB Inputs Not Supported
Differential Clock Input Supported
Redundant Row Address Not Supported
--------[ Chipset ]-----------------------------------------------------------------------------------------------------
Chipset Properties:
Motherboard Chipset Intel Brookdale i845E
In-Order Queue Depth 12
CAS Latency 2.5T
RAS To CAS Delay 3T
RAS Precharge 3T
RAS Active Time 6T
AC'97 Audio Controller:
Audio Controller Type Intel 82801DB(M) ICH4
Codec Name Avance Logic ALC655/ALC850
Codec ID 414C4760h
Memory Slots:
DRAM Slot #1 512 MB (PC2100 DDR SDRAM)
AGP Properties:
AGP Version 2.00
AGP Status Enabled
AGP Aperture Size 64 MB
Supported AGP Speeds 1x, 2x, 4x
Current AGP Speed 4x
Fast-Write Supported, Enabled
Side Band Addressing Supported, Enabled
Chipset Manufacturer:
Company Name Intel Corporation
Product Information http://www.intel.com/products/browse/chipsets.htm
Driver Download http://support.intel.com/support/chipsets/index.htm
Problems & Suggestions:
Problem AGP aperture size is more than half of the system memory size. This may cause performance penalty.
--------[ BIOS ]--------------------------------------------------------------------------------------------------------
BIOS Properties:
BIOS Type AMI
System BIOS Date 09/01/03
Video BIOS Date 08/18/03
BIOS Manufacturer:
Company Name American Megatrends Inc.
Product Information http://www.ami.com/amibios

MS 6533 & adding 256 DDR PC2100

Similar Messages

Maybe you are looking for