MS/UB 12.0.1 BUG? Cannot set order of magnitude (GHz-MHz-kHz) in bode plotter if viewed in 2nd monitor

(Win 7 laptop with external monitor connected. Desktop streched across both monitors.)
I have MS open and maximized in the external monitor. If I double-click the bode plotter, the bode plotter window opens in the external monitor as expected, and all controls seem to work correctly and bode plot graphic seems to work correctly. I just can't adjust the order of mag indication (GHz-MHz-kHz, etc.) for any of the initial or final value selectors, when the bode plotter window is in the external monitor. If I drag the bode plotter window down to the laptop monitor, it works as expected.
Regards,
Who

Hello,
I can see the bode plotter window equally as well in either monitor. The problem is, the controls for changing from Hz to kHz, etc, do not work when the bode plotter appears on the external monitor, but they do when the bode plotter appears on the built-in monitor. The issue is getting the software to work correctly when a user runs the software on a computer that has more than one monitor.
Regards,
Who

Similar Messages

BUG : Cannot set Nokia Messaging as default client...

Hi,
Nokia Email v.9.5.3.75 on Nokia E71 (firmware v300.21.012).
Mail for Exchange v2.09.158.
I can select 'E-mail' as default mailbox in 'messages > settings'. However when in Gallery and trying to send a picture from the list it opens Mail for Exchange client ! And when opening the picture .. and then trying to send .. it lets me choose the mailbox (that should happen in the list-view also !) .. but .. when i try to send via 'E-mail' (the default) nothing happens !
Please fix a.s.a.p. since these are pretty basic functions if you ask me that should have been tested !

I actually got this to work. When I did the check for new firmware, the system told me I was up to date. I reflashed the firmware anyway. From a blank device, everything is integrated perfectly.
Whe I go the new phone, I used the backup and restore function of Nokia PC suit to restore settings to my phone. When I did that (with up to date firmware) I had the problems mentioned above. I suspect then that this is an issue with the restore function, although I have not bothered to isolate the issue as I now have a working phone.
So what worked for me is:
1) Run firmware update.
2) Firmware update tells me my phone is up to date and asks if I want to replace the firmware anyway. I chose yes
3) Reflash and lose all programs, data, themes, etc.
4) Completely set up the phone from scratch
5) Everything works beautifully, except for the 4 hours of my life I will never get back

[svn:fx-trunk] 15267: Cannot set Spark Label or Spark RichText showTruncationTip property at runtime using bindngs or ActionScript .

Revision: 15267
Revision: 15267
Author:   [email protected]
Date:     2010-04-07 15:57:04 -0700 (Wed, 07 Apr 2010)
Log Message:
Cannot set Spark Label or Spark RichText showTruncationTip property at runtime using bindngs or ActionScript.
QE notes:
Doc notes: None
Bugs: partial fix for SDK-25980
Reviewed By: Gordon
Tests run: checkintests
Fix Label styles baselineShift and typographicCase so they work as documented. The documentation is from TLF.
QE notes:
Doc notes: None
Bugs: partial fix for SDK-25169, SDK-25210
Reviewed By: Gordon
Tests run: checkintests
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-25980
    http://bugs.adobe.com/jira/browse/SDK-25169
    http://bugs.adobe.com/jira/browse/SDK-25210
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/Label.as

I'd have to see the xml to say what, but 1009 is what it says - a null reference has no properties, it is null.
Try tracing out SampleWebServiceCS.GetMember and you'll quickly see where along your .element.element path you have an error.
(BTW, I've not used s:Operation before, but is your syntax correct?)
G

SoapDoc::Init: Cannot set inout buffer

My calls to http://...:8000/sap/bc/soap/rfc worked fine for several years.
However, since I installed basis support packages 61-63 for basis 6.20 (SAPKB62061 to SAPKB62063), I get the following error:
<?xml version="1.0" encoding="UTF-8" ?>
- <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/">
- <SOAP-ENV:Body>
    - <SOAP-ENV:Fault>
      <faultcode>SOAP-ENV:Server</faultcode>
      <faultstring>Internal Server Error</faultstring>
      <detail>SoapDoc::Init: Cannot set inout buffer</detail>
      </SOAP-ENV:Fault>
    </SOAP-ENV:Body>
</SOAP-ENV:Envelope>"<faultstring>Internal Server Error</faultstring> <detail>SoapDoc::Init: Cannot set inout buffer</detail>".
(Fortunately, our applications using webservices are still working properly.)
What has changed in these basis support packages. Is there a bug fix for it?
Regards
Walter

Hello Walter,
I am trying to create web services was620 r/3 4.7 Getting the same error. Also if you can provide input on creating web services using function module (remotelyenabled)
thanks,
jim

How to export all Artboards for different mobile resolutions? e.g. My artboards are 1080 x 1920 px, I want them all to 216 x 384px... ( I m using export .png by adjust ppi, but cannot set less than 72ppi)

e.g. My artboards are 1080 x 1920 px, I want them all to 216 x 384px...
( I am using export .png by adjust ppi, but cannot set less than 72ppi)

Sorry to hear that. There is an enhanced version on Adobe Exchange that may be more "bug free".
https://creative.adobe.com/addons/products/2955#.VNQ6Asbdkqg
You might want to test is on a smaller file and see if it will export the PNGs at the proper resolution. My quick test showed that it did.
You can delete the "Layer" export and get JUST the Artboards by choosing "Export Layers>None". You may have already tried that.
You might also break your file into 2 or more files and see if it works with fewer artboards.
I have had good success with the free version. Perhaps the paid version will solve the issue.

In FrameMaker 9.0.3 and 9.0.4, I cannot set tab stops for a style in the Paragraph Designer.

In FrameMaker 9.0.3 and 9.0.4, I cannot set tab stops for a style in the paragraph designer. Here are the steps to dysfunction:
1. In Paragraph Designer, for Tab Stops, click Edit. Edit Tab Stop dialog box opens, and the Paragraph Designer dialog box closes.
2. Type value in New Position box.
3. Click Continue. The Edit Tab Stop box closes.
4. Open Paragraph Designer. No tabs are recorded.
Discussion of a similar problem occured on this forum in June 2010. At that time, the resolution seemed to be to upgrade to 9.0.3. Has anyone else encountered this problem with these versions?
Thanks.

Hi, Arnis,
Brilliant! Thanks so much. I only looked at the later discussions of that thread, which seemed to indicate the problem would be solved by an upgrade to 9.0.3.
-Trish

When I click the iCloud button I get a browser with check boxes, not slider buttons and it does not have a "backup and storage" button. So I cannot set up backup.

When I open my iCloud browser it looks different than "normal." It shows the list with check boxes, not slider on-off buttons. It dos not show a "storage and backup" button so I cannot set up my backup. What is wrong?

If see something like the image below it's because you are looking at the iCloud settings on your Mac, not on an iOS device (which has sliders). Storage & Backup isn't in the Mac settings because you cannot back up your Mac to iCloud. Only iOS devices can back up to iCloud. On a Mac, you can get information about your iCloud account storage by looking at the green usage bar at the bottom and by clicking the "Manage..." button on the bottom right.

When I try to create a calendar announcement in my iCloud calendar thru my PC / Outlook, it says 'the set of folders could not be opened. The information store could not be opened'. Can anyone help? This means I cannot set any calendar events thru my PC.

When I try to create an iCloud calendar announcement / event on my PC thru Outlook, I get the message 'the set of folders could not be opened. The information store could not be opened'.
I cannot set any calendar events for my shared calendar. Can ayone help?

If you upgraded to Windows 8 you may need to update the iCloud control panel for Windows to version 2.1 (see http://support.apple.com/kb/TS4463).

Cannot set Windows 7 default printer in Boot Camp

I discovered today that I cannot set a default printer in Windows 7. I right click, and try to make one of the printers default but there is no check mark. One of the programs that I use says I do not have a printer installed.
I can print to my printers using Word by selecting the printer that I want but cannot select a default in control panel.
If I access Windows programs using a VM Fusion, the program that says there is no printer installed in boot camp, does not give be this message and I can select a printer. BTW, I have never been able to select a "default printer" using VM Fusion.
The only thing unusual is I had to reactivate Windows for no apparent reason last week and I cannot select all of the Themes available in the personalize menu.
It is difficult to pinpoint when the printer issue started because I mainly access my Windows programs through VM Fusion. I am guessing the changes happened when I had to reactivate Windows
I am away from my iMac currently and was wondering if anyone has experienced this and/or have a suggestion.?
Thanks,
Roy

Update.
Apparently this is a Windows Registry issue. Looks as if there is a VM Fusion driver set as default (thinprint??) I cannot delete or modify this registry key. A new profile solves this issue and I will have to copy everything over to the new profile, if I cannot get this registry key issue solved. I will post on a Microsoft board to see if there is a solution.
Roy

Cannot set status of Urgent Change after manual transport

Hi all,
We are usng CHARM in Solution Manager 7.1 for import to the SAP ECC (EHP6) systems.
I cannot set the status of the Urgent Change document (ZMHF) to status "To be Tested" after the transports were manually released and manually imported to the ECC QA system.
When I use action "Pass Urgent Change to Test", the system stopped with error "Not all task are yet released" and will not change the status .
Based, on the Task List log, the system started the release process although no transports were released.
Is there any way that I can update the status of the Urgent Change document to "To be Tested"?
I tried program CRM_SOCM_SERVICE_REPORT but still did not change the status.
Any suggestion?
Thanks,
Tess

Hi Venu,
have a look under System Administration - System Configuration -- Knowledge Management -- Configuration --Content Management -- User Interface -- Commands -- UI Command Groups -- StatemanagementGroup.
See Java class: com.sapportals.wcm.rendering.uicommand.cm.UIStatemanagementGroupCommand. Take the class and decompile this and everything needed around to understand how this class works.
Then you can choose to extend this CommandGroup to also have a command "Resubmit for Approval" or you can implement your own UI Command only for resubmitting (you will also have to activate your command (group) by settings within the configuration).
On the other hand, if all this is completely new to you, I'm a bit sceptical if the task isn't a bit too big as a first task on KM implementation topics...?
Hope it helps
Detlev

[Solved?] VLC won't play audio -- cannot set buffer duration

I can't play sound in VLC. I have tried the default and the ALSA outputs. I know ALSA works, because mpg123, speaker-test, and rdesktop's sound all work. (Saying that, I can't tell if mpg123 uses alsa or not - rdesktop does though)
Attempting to play something in VLC gives me some rather cryptic errors. What follows is the output of "vlc -v" and an attempt to play a video with sound. I have split the "code"-tag just before the actual error output for clarity and ease of scanning.
VLC media player 2.0.7 Twoflower (revision 2.0.6-54-g7dd7e4d)
[0x8eb108] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/audio_output/libportaudio_plugin.so' (libportaudio.so.2: cannot open shared object file: No such file or directory)
[0x8eb108] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/audio_output/libjack_plugin.so' (libjack.so.0: cannot open shared object file: No such file or directory)
[0x8eb108] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/services_discovery/libmtp_plugin.so' (libmtp.so.9: cannot open shared object file: No such file or directory)
[0x8eb108] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/notify/libxosd_plugin.so' (libxosd.so.2: cannot open shared object file: No such file or directory)
[0x8eb108] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/visualization/libgoom_plugin.so' (libgoom2.so.0: cannot open shared object file: No such file or directory)
[0x8eb108] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/visualization/libprojectm_plugin.so' (libprojectM.so.2: cannot open shared object file: No such file or directory)
[0x8eb108] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/codec/libtwolame_plugin.so' (libtwolame.so.0: cannot open shared object file: No such file or directory)
[0x8eb108] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/access/libvcdx_plugin.so' (libvcdinfo.so.0: cannot open shared object file: No such file or directory)
[0x8eb108] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/access/libaccess_jack_plugin.so' (libjack.so.0: cannot open shared object file: No such file or directory)
[0x8eb108] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/access/libaccess_dv_plugin.so' (libavc1394.so.0: cannot open shared object file: No such file or directory)
[0x8eb108] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/access/libaccess_mtp_plugin.so' (libmtp.so.9: cannot open shared object file: No such file or directory)
[0x8eb108] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/video_output/libaa_plugin.so' (libaa.so.1: cannot open shared object file: No such file or directory)
[0x8eb108] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/video_output/libcaca_plugin.so' (libcaca.so.0: cannot open shared object file: No such file or directory)
[0x8eb108] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/control/liblirc_plugin.so' (liblirc_client.so.0: cannot open shared object file: No such file or directory)
[0x8eb108] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
[0x7f1e6cc01bf8] mkv demux warning: MKV/Ebml Parser: m_el[mi_level] == NULL
[0x7f1e6cc01bf8] mkv demux warning: MKV/Ebml Parser: Up cannot escape itself
Fontconfig warning: FcPattern object size does not accept value "0"
[0x7f1e68c068a8] alsa audio output error: cannot set buffer duration: Invalid argument
[0x7f1e68c068a8] pulse audio output error: PulseAudio server connection failure: Connection refused
[0x7f1e68c068a8] oss audio output error: cannot open audio device (/dev/dsp)
[0x7f1e68c068a8] main audio output error: no suitable audio output module
Fontconfig warning: FcPattern object size does not accept value "0"
[0x7f1e6cc02b68] main decoder error: failed to create audio output
I have reproduced this with the same result using 'sudo vlc-wrapper' and I am added to the 'audio' group.
I have no idea where to start with this issue, I've tried googling but it seems that only one person has ever had this issue before (if Google is to be considered a reputable source), and he was running his own VLC build. I am running the build "pacman -S vlc" gave me. If anyone could point me in the right direction on this issue I'd be grateful.
Edit: This is my /etc/asound.conf. I have no idea what any of this means, at this point it's fill-in-the-blanks wiki copypasta (Edit2: The purpose of this file is to try to stop alsa from sending all my sound through a disconnected HDMI instead of the speakers)
# Use PulseAudio by default
#pcm.!default {
# type pulse
# fallback "sysdefault"
# hint {
# show on
# description "Default ALSA Output (currently PulseAudio Sound Server)"
#ctl.!default {
# type pulse
# fallback "sysdefault"
pcm.!default {
type plug
slave.pcm {
@func getenv
vars [ ALSAPCM ]
default "hw:Generic_1"
# vim:set ft=alsaconf:
Last edited by Score_Under (2013-08-02 23:23:27)

Situation update:
1. I didn't need my asound.conf like that -- I should have used pulseaudio in the first place, I was unaware that ALSA does not allow more than one program to use the sound device at the same time, whereas pulseaudio is used to mix sounds.
2. VLC works fine on PulseAudio. No idea why it failed on ALSA!
Last edited by Score_Under (2013-08-02 23:22:45)

Need help on ORA-02074: cannot SET NLS in a distributed transaction

Hi All,
I am Writing a plsql Code like this
DECLARE
op_job_id NUMBER;
op_object_version_number NUMBER;
x_job_definition_id NUMBER;
op_name VARCHAR2(1000);
L_VERIFY_FLAG VARCHAR2(1);
l_error_message VARCHAR2(2000);
BG_ID NUMBER;
lv_job_group_id APPS.per_job_groups.job_group_id@SYSTEM_LINK_VISMA%TYPE;
CURSOR C1 IS SELECT * FROM EBS_PER_JOBS_STG;
BEGIN
FOR H1 IN C1
LOOP
BEGIN
IF H1.BUSINESS_GROUP_NAME IS NOT NULL THEN
SELECT BUSINESS_GROUP_ID,job_group_id INTO BG_ID,lv_job_group_id
FROM APPS.PER_JOB_GROUPS@SYSTEM_LINK_VISMA
WHERE DISPLAYED_NAME=H1.JOB_GROUP_NAME;
END IF;
EXCEPTION
WHEN OTHERS THEN
L_VERIFY_FLAG := 'E';
l_error_message := 'Entered Job Group Name is Wrong';
END;
-->> JOB GROUP ID <<--
APPS.hr_job_api.CREATE_JOB@SYSTEM_LINK_VISMA
(p_business_group_id => BG_ID
,p_date_from => H1.DATE_FROM
,p_approval_authority => H1.APPROVAL_AUTHORITY
,p_emp_rights_flag => H1.EMP_RIGHTS_FLAG
,p_benchmark_job_flag => H1.BENCHMARK_JOB_FLAG
,p_job_group_id => lv_job_group_id
,p_job_information1 => H1.JOB_INFORMATION1
,p_job_information2 => H1.JOB_INFORMATION2
,p_job_information3 => H1.JOB_INFORMATION3
,p_job_information4 => H1.JOB_INFORMATION4
,p_job_information5 => H1.JOB_INFORMATION5
,p_job_information6 => H1.JOB_INFORMATION6
,p_job_information7 => H1.JOB_INFORMATION7
,p_segment3 => H1.JOB_CODE --JOB_CODE
,p_segment6 => H1.JOB_NAME --JOB_NAME
,p_job_id => op_job_id
,p_object_version_number => op_object_version_number
,p_job_definition_id => x_job_definition_id
,p_name => op_name);
dbms_output.PUT_LINE('OUTPUT JOB NAME CREATED : '||op_name);
END LOOP;
EXCEPTION
WHEN OTHERS THEN
dbms_output.PUT_LINE('Error Message Is: '||SQLERRM);
END;
i am running it in Another database Using database link connecting to Apps.
when i am running it am getting the following Error:
Error Message Is: ORA-02074: cannot SET NLS in a distributed transaction
ORA-06512: at "APPS.HR_KFLEX_UTILITY", line 2423
ORA-06512: at "APPS.HR_KFLEX_UTILITY", line 2380
ORA-06512: at "APPS.PER_JBT_UPD", line 468
ORA-02074: cannot SET NLS in a distributed transaction
ORA-06512: at "APPS.HR_JOB_API", line 878
Please help me on this, this is quite urgent to me.
thanks
sri

Please see these docs.
ORA-02074: Cannot SET NLS in a Distributed Transaction [ID 556391.1]
Portal Used To Call PO_CHANGE_API1_S: ORA-20001: ORA-02074: Cannot SET NLS In A Distributed Transaction [ID 561246.1]Why are Concurrent Programs Calling FND_GLOBAL.APPS_INITIALIZE Using DBLinks Failing? [ID 466800.1]
ORA-02074 when Executing set_nls over a DB Link [ID 132679.1]
Thanks,
Hussein

Viewlink between Custom VO "Cannot set user query to view"

We have an application where we have extended custom VO and EO’s to get data from flat files. It all looks fine till we create a viewlink for a LOV with two related VO’s. The viewlink VO fails we get message of the form -Cannot set user query to view "CustomVO1" because it is a destination in a view link”. Are there any methods to override in the custom VO/EO or any parameter to be added to configs. Has someone tried this out

Thanks for the update and for sharing the solution!
Regards,
Hussein

Users are not able to use Outlook 2010 to view free/busy information and cannot set Out Of Office automatic reply

Hi All,
Please help me.
I have an issue where users are not able to use Outlook 2010 to view free/busy information and cannot set Out Of Office automatic reply. But they are can set Out Of Office automatic reply from OWA. My exchange server is Ms Exchange 2010.
The test E-mail AutoConfiguration failed with this error:
Autodiscover to https://mydomain.com/autodiscover/autodiscover.xml starting
GetLastError=12175; httpStatus=0.
Autodiscover to https://mydomain.com/autodiscover/autodiscover.xml Failed (0x800C8203)
Autodiscover to https://autodiscover.mydomain.com/autodiscover/autodiscover.xml starting
GetLastError=12007; httpStatus=0.
Autodiscover to https://autodiscover.mydomain.com/autodiscover/autodiscover.xml Failed (0x800C8203)
Local autodiscover for mydomain.com starting
Local autodiscover for mydomain.com Failed (0x8004010F)
Redirect check to http://autodiscover.mydomain.com/autodiscover/autodiscover.xml starting
Srv Record lookup for http://autodiscover.mydomain.com/autodiscover/autodiscover.xml Failed (0x80072EE7)
Srv Record lookup for mydomain.com starting
Srv Record lookup for mydomain.com Failed (0x8004010F)
Any idea?
Thanks,
Pieter

OK.
Please follow this step.
1. As you said you are in coexistence step , so for now all endpoint already point to Exchange 2010 right?
2. Check legacy owa redirect that you already configure
3. In Exchange 2010 , Make sure that you already configure "Autodiscoverinternaluri" by this command set-clientaccessserver -identity "servername" -autodiscoverinternaluri
https://autodiscover.domain.com/autodiscover/autodiscover.xml. and don't forget to create autodiscover record in DNS
4. in Exchange 2010 , Make sure that you already configure "EWS" path by this command set-webservicesvertualdirectory -identity "XXX\Default web site name" -internalurl
https://yourinternalurl/EWS/Exchange.asmx -externalurl https://yourexternalurl/EWS/Exchange.asmx
5. don't forget to replicate freebusy from Exchange 2003 to Excahnge 2010 via public folder.
You error look like client cannot get autodiscover process please check it again.

Cannot set up certs for trusted CAs going from 1.4.2_03 to 1.4.2_13

Getting a wierd issue with "Cannot set up certs for trusted CAs" This works if we are using anything less then 1.4.2_07, but the minute we install 1.4.2_07 or 13 as the case may be we get the following Exception:
log9: java.lang.ExceptionInInitializerError
log9: at javax.crypto.Cipher.a(DashoA12275)
log9: at javax.crypto.Cipher.getInstance(DashoA12275)
log9: at com.gm.gwm.common.util.AesUtil.encrypt(AesUtil.java:31)
log9: at com.gm.gwm.common.data.OfflineAuthenticatorDao.updatePassword(OfflineAuthenticatorDao.java:645)
log9: at com.gm.gwm.common.service.OfflineAuthenticatorService.updatePassword(OfflineAuthenticatorService.java:141)
log9: at main.jspService(_main.java:156)
log9: at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
log9: at oracle.lite.web.JupServlet.service(Unknown Source)
log9: at oracle.lite.web.JspRunner.service(Unknown Source)
log9: at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
log9: at oracle.lite.web.JupServlet.service(Unknown Source)
log9: at oracle.lite.web.MimeServletHandler.handle(Unknown Source)
log9: at oracle.lite.web.JupApplication.handle(Unknown Source)
log9: at oracle.lite.web.JupApplication.service(Unknown Source)
log9: at oracle.lite.web.JupHandler.handle(Unknown Source)
log9: at oracle.lite.web.HTTPServer.process(Unknown Source)
log9: at oracle.lite.web.HTTPServer.handleRequest(Unknown Source)
log9: at oracle.lite.web.JupServer.handle(Unknown Source)
log9: at oracle.lite.web.SocketListener.process(Unknown Source)
log9: at oracle.lite.web.ClientListener.process(Unknown Source)
log9: at oracle.lite.web.SocketListener$ReqHandler.run(Unknown Source)
log9: Caused by: java.lang.SecurityException: Cannot set up certs for trusted CAs
log9: at javax.crypto.SunJCE_b.<clinit>(DashoA12275)
log9: ... 21 more
log9: Caused by: java.lang.IllegalStateException: Already connected
log9: at java.net.URLConnection.setUseCaches(Unknown Source)
log9: at sun.net.www.protocol.jar.JarURLConnection.setUseCaches(Unknown Source)
log9: at javax.crypto.SunJCE_d.a(DashoA12275)
log9: at javax.crypto.SunJCE_b.g(DashoA12275)
log9: at javax.crypto.SunJCE_b.f(DashoA12275)
log9: at javax.crypto.SunJCE_t.run(DashoA12275)
log9: at java.security.AccessController.doPrivileged(Native Method)
Not sure what we are doing wrong.
    public static String encrypt(String value) throws AesException {
          try {
               SecretKeySpec secKeySpec = new SecretKeySpec(fromHexString(encyptKey), algorithm);
               Provider provider = new SunJCE();
              Security.addProvider(provider);
            Cipher cipher = Cipher.getInstance(algorithm, provider);
               cipher.init(Cipher.ENCRYPT_MODE, secKeySpec);
               byte[] encryptedBytes = cipher.doFinal(value.getBytes());
               return toHexString(encryptedBytes);
          } catch (Exception e) {
               throw new AesException(e);
     }

I added that late just in case, for some strange reason, the provider wasn't getting picked up.
Here is the list of available providers:
log9: SUN (DSA key/parameter generation; DSA signing; SHA-1, MD5 digests; SecureRandom; X.509 certificates; JKS keystore
; PKIX CertPathValidator; PKIX CertPathBuilder; LDAP, Collection CertStores)
log9: Sun JSSE provider(implements RSA Signatures, PKCS12, SunX509 key/trust factories, SSLv3, TLSv1)
log9: SUN's provider for RSA signatures
log9: SunJCE Provider (implements DES, Triple DES, AES, Blowfish, PBE, Diffie-Hellman, HMAC-MD5, HMAC-SHA1)
log9: Sun (Kerberos v5)
log9: java.lang.ExceptionInInitializerError
The minute I rollback to an older JVM this works.

MS/UB 12.0.1 BUG? Cannot set order of magnitude (GHz-MHz-kHz) in bode plotter if viewed in 2nd monitor

Similar Messages

Maybe you are looking for