Ms word 2000 not showing up in software scan?

Using ZEN 3.2 SP1
Windows 2000 Pro with SP2 workstation with MS Office 2000 installed.
Software inventory will report workstations with Word 97 and Word
2002,
but NOT Word 2000?
Any ideas why?
--Kevin

I'm guessing something with the MSI as well.
Now, it WILL show that Office 2000 is installed, just not the
individual
components.
All workstations in the entire container (I did a search for all
workstations that had software titled: %word%)
It will show me Word 97 and Word 2002, but not Word 2000
Now, if I pick a select workstation and go into Properties -> ZEN
Inventory -> Minimal information -> Detailed information > Software ->
By Vendor -> Microsoft Inc it does not list Word or Excel or PP
either,
but it does list Office 2000.
So maybe this is how it's supposed to be?
Keep in mind we use zfd 3.2 with SP1
Should be upgrading to ZEN 4.0.1 in the next several weeks.
I suppose I can tell it to look for Word.exe?
(I see you use Spamcop too)
--Kevin
In article <Mtgra.4236$[email protected]>,
[email protected] says...
> Kevin,
> is it just one workstation or a general problem ?
> Could it be an MSI problem ? Because Zen inventory i using the MSI
> informations placed in the registry to retrieve informations about
> these products.
>
>

Similar Messages

Where is mavericks? not showing up in software update?

where is mavericks? not showing up in software update?

Use this link
https://itunes.apple.com/app/os-x-mavericks/id675248567?mt=12
All can download from here NOW!

I upgrade succesfully my laptop OS from mountain lion to maverick. i have my canon IR 2530 driver installed. after i reset my printer, the driver is not showing from Printer Software. could you guys help me to solve these problem?

I upgrade succesfully my laptop OS from mountain lion to maverick. i have my canon IR2530 driver installed. after I reset my printer and add again(Canon IR2530), the driver is not showing from Printer Software. could you guys help me to solve these problem?

Maybe this thread will help:
https://discussions.apple.com/message/23873672#23873672

My settings "general". Does not show a"update software " choice from the menu?

My settings "general". Does not show a"update software " choice from the menu? I cannot find what iOS software I'm currently using or what iPad I have

The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848

Applications Installed through task sequence not showing up in Software Center

In the task sequence we use for our OSD Windows 7 machine build, we have Custom-Install Application steps which install a number of of our Applications. Each of these Applications has the "Allow this application to be installed from the Install
Application task sequence action without being deployed" checkbox checked. All of the Applications have the following properties set:
Installation behavior: Install for system
Logon requirement: Whether or not a user is logged in
Installation program visibility: Hidden
When a machine is built using this task sequence, all of the Applications install successfully - they show up in Control Panel\Programs and Features, and they run correctly. However, none of them show up in the Software Center. I'm not seeing anything in
any of the logs that indicates a problem, and the Software Center remains empty even after running all the client evaluation cycle actions
Interestingly, if I add a couple of the newly build machines to a collection, then target deployments for the already installed Applications to that collection, after running the Machine Policy Retrieval and Evaluation Cycle the Applications immediately
show up in Software Center as installed.
Does anyone know if Applications installed through a task sequence do not show up in the Software Center by default, or could you give me some troubleshooting tips if this is not normal?
Thanks for any suggestions!
SCCM 2012 SP1, Single site, W7 clients

Why you deploy applications through task sequences? Task sequences are built and meant to be used with OSD, not application deployment.
To my knowledge, if you have application install step in a task sequence and you deploy that task sequence to a collection of machines, the software center on those machines only sees the task sequence itself, not the applications inside the task sequence.
If you want your applications to be shown in the software center, change the method of deploying stuff and deploy applications as they're are meant to.

11.0.3 update not showing up in software update.

I am currently running itunes 11.0.2 on OS X 10.8.3. Checking for an upate for itunes from within the app indicates an update is available. Choosing to download it brings up the app store. App store checks and retruns that no updates are available. Any ideas? I guess I could go ahead and download the install image for 11.0.3. Just curious why it isn't showing up.
thanks.

see:
software update not showing updates

RoboHelp for Word will not show new .WMF graphics

I am working on a help file, and I have to insert equations that I would like to attach pop-ups to. I add the .wmf graphic and add the pop-up, but when I compile the image is not there. This is an older file that was converted over to Robohelp for word and it has .wmf graphics that compile. The only ones that do not show up are the new ones I add to the project. There is just a blank space where the graphic should be. The only way I can get the graphic to show is to convert it into a .shg graphic and then it works. I don't want to keep converting the .wmf file to .shg it is just a waste of time, and it makes my image folder double in size. I have tried inserting the equation as an object in word, but that will not allow me to link it to a pop-up and still have the equation there. Any help with this would be greatly appreciated. Thank you.

Peter and Brian, THANKS so much! RoboHelp for Word is working
now.
Peter, your advice to install RoboHelp AFTER installing Word
was key in solving this problem.
For a quick summary of the result -- our Help Desk
uninstalled and reinstalled Outlook, Word, and RoboHelp. Then they
reinstalled Word and Outlook; needed to change an "Advanced"
setting in outlook; to get Word to stop giving me the error
messages, they needed to redo my user profile. Then after I was
confident that Word and Outlook were working correctly, this
afternoon I installed RoboHelp X5 via my CD, and then downloaded
and installed these two patches from Adobe.com:
- rho_x501.exe (for the RH Office Word 2003 Support Update)
- rho13_x502.exe (for the Microsoft XP Service Pack 2 Support
Update X5.0.2).
I'm so thankful that RoboHTML and RoboHelp for Word seem to
be working well! Thanks again!
Janice
P.S. I do have one more question about a patch that I've not
yet loaded, but I'll post that under a separate subject.

ITunes 9.1.1 does not show up in Software Update

I am aware that iTunes 9.1.1 is availible for download at Apple's website, however for some strange reason iTunes always alerts me to upgrade to 9.1.1 but when I open Software Update it says that "Software Update doesn’t have any new software for your computer at this time." I am currently running iTunes 8.2.1 if that helps any, and I would just like to know why the newest version does not show up in my Software Update and if there is anything that can be done to fix this.

download 9.1.1 from here: http://www.apple.com/itunes/download/.
JGG

Send to Excel or Word does not show up as an option in 6.2.2

I have Office Home and Student 2007 installed and I have also installed 6.2.2 Desktop. However, The Send to option does not show up where Help says it should be, so I can't export to Excel.
What am I doing wrong?
Post relates to: Zire 21

It may be best to clean your registry after uninstalling everything.
This is a relatively extreme step, but after this you should be able to
install (first LabVIEW, then any DAQ, then any add-ons and toolkits)
and see everything in the right place.
After uninstalling:
Remove the following registry components from the Windows Registry:
HKEY_CURRENT_USER\Software\National Instruments Delete the entire tree!
HKEY_LOCAL_MACHINE\Software\National Instruments Delete the entire tree!
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Enum\PCI\ , \ISA, or \PCMCIA and delete registry entries containing any keys with 1093 in them.
Do not worry if any of these trees are not listed.
Richard
Richard
Field Sales Engineer, New Jersey
National Instruments

Security Update 2008-008 1.0 PPC not showing up in software update panel

Security Update 2008-008 1.0 PPC is not showing up in the software update panel of a powerbook g4 with os 10.4.11. anybody else experiencing this ?
tia

HI, try Limnos' suggestion here...
http://discussions.apple.com/thread.jspa?messageID=8633164#8633164

HP Printer Driver Update 1.1.1 not showing up in software update

i have a HP HP Deskjet D4260 attached to my macs, but the 1.1.1. update doesn't show up in software update. (as 1.1 did)
i read here
http://www.apple.com/support/downloads/hpprinterdriver111.html
that the update will only be visible if the printer is connected to your computer or a print queue has been created for an earlier version. well they are.
any suggestions here as i remember that with 1.1 there was only about 100mb installed of the total of 450mb.
tia m.

http://support.apple.com/kb/HT1893
here it states that the DeskjetD2400 series drivers are still at 2.3.2. but i thought that with these updates also general printing software is updated
see also here: http://discussions.apple.com/thread.jspa?threadID=1710387&tstart=0

Clients not showing apps in software center after update to CU4

I recently upgraded my SCCM2012 SP1 to CU4 in an effort to support our Macs some of which are running Mavericks. However, I have been noticing that many times when I do an OSD of a Windows computer one of a couple things will happen. If it is a computer
that is being re-imaged, it will only get a single app installed and no other apps will show up in Software Center. I also just today got a new computer and most of our apps are in SC but several are missing. They show up in the console as being deployed to
the machine in it's properties under Devices, but they just aren't getting to the computer. On the re-image computer many times I could just remove it entirely from SCCM then re-add it and it would work fine but with the new computer I'm at a loss as to what
to do. Has anyone else seen this behavior?

Is the device stuck in provisioning mode? That would block it from getting client policy (among other things).
To check, see ProvisioningMode = True under the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\CCM\CcmExec registry key.
This usually happens if an unsupported update gets installed while in the task sequence:
http://support.microsoft.com/kb/2894518/en-us
You can fix a broken client with this PowerShell command:
Invoke-WmiMethod -Namespace root\CCM -Class SMS_Client -Name SetClientProvisioningMode -ArgumentList $false
To keep them from breaking, use offline servicing to inject the updates into all of your images so they don't get installed during the task sequence.
I hope that helps,
Nash
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you've found a bug or want the product worked differently,
share your feedback.
<-- If this post was helpful, please click "Vote as Helpful".

WORD document not showing up in Apple Recent Items Documents

I work on a certain WORD document every day, maybe serveral times a day. I edit it each time, making numerous cuts, copies, pastes and saves. I remember when I first got the computer, it would show up in my Apple list of recent documents and as such was handy when I relaunched it every day. Now it isn't showing up there at all. WORD will be listed as a recent application but not the document itself. I have to access it by first launching WORD, not by clicking on it in the Apple menu as I did before. I have "Number of recent items" in the System Preferences set to 15 documents. I tried saving this document with another name to see if that would work. It didn't. Then I thought maybe there was a glitch in the particular WORD document so I opened a new one, typed a line, saved it, quit the program and then looked under the Apple menu. It was not there either. So, is this a problem with some kind of WORD preference setting or with my computer? I've recently repaired my permissions and verified my disk and there appear to be no problems.

OK, I may have resolved this but not in a way that I like. If I put the document in the "Documents" folder in my User folder then it shows up. But I prefer to organize my stuff in my own way, make my own folders and put them where I want to, as I did with system 9. Is this not possible on OSX? It's going to be a disorganized hodge-podge if I have to do it the way it seems to be set up to do - stuff is going to be all over the place and I will not feel in control over anything. What also doesn't make sense it that the Apple menu lists other items in recent "documents" that are not in the home user>documents folder at all. One is something from User>Sites and the other is the Appearance.prefPane.

My iPhone 4 is not showing me the ¨software update¨

I have an iPhone 4 and i wanna update to iOS 7 but neither my phone nor itunes is showing me that i have an update, everytime i check it says "your software is up to date". Anyone can help me? iOS 7 is supposed to be available to the public today, however it doesnt seem to me. Thanks for any help

It's not out yet, wait.

NOT SHOWING FACTORY INSTALLED SOFTWARES IN " RECOVERY MANAGER "

I'VE TRIED TO REINSTALL SOME SOFTWARE PROGMS BY USING " RECOVERY MANAGER ".
BUT I DIDNT FIND ANY FACTORY INSTALLED SOFTWARE PROGRAMS.
PLZ ASSIST ME.
I WILL BE WAITING FOR UR KIND REPLY.
THANK U SO MUCH.

That is odd - that is, as long as the integrity of the Recovery Manager is intact, I would expect it to work.
For example,
If you have reinstalled the system using other than the Recovery Manager,
or if you have upgraded the Operating System,
or added / Removed data from the Recovery Partition,
OR if the Recovery Manager is corrupted in some way,
then
the Recovery Manager will either not work at all, or may at least show inconsistancies.
======================================================================================
You might try using a Restore Point to "go back in time" and see if the setting can recover.
Using Microsoft System Restore (Windows 8)
HP PCs - Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8)
You can go to your system's website for the current Drivers and Software that are available for your computer.
First, create a place to which you can return in case things do not work as you hope:
Create a restore point
Install Software and Drivers from HP Website
Go to the top of the HP forum page to Support and Drivers
If prompted, Enter your Country or Region and
Enter your Computer Model information,
Go to Software and Drivers...
Enter your Operating System in the Drop-down menu... Scroll down
Select desired Category Software – Solutions >> Driver - Keyboard, Mouse and Input Devices
NOTE: Download ONLY the relevant drivers and software for YOUR hardware - note that in the website you might find more than one kind of driver for more than one model of computer -- this is normal, but it does not mean YOUR computer uses all the software offered.
Expand and decide if you need to install that package.
Assure that you download and install only the most recent versions of each driver or program.
Save the appropriate *.exe installation package on your computer
NOTE the name and the location - the *.exe file will likely save to "Downloads “
Install the Software / Driver installation package: If you have ‘Admin’ control, you may highlight the package(s) and “double-click” to install, else Right-Click, Select ‘run as Administrator’ and install.
NOTE: There is sometimes a lot of information at the computer’s website. Take a look at what’s available and bookmark the page for later reference.
======================================================================================
Kind Regards,
Dragon-Fur

Ms word 2000 not showing up in software scan?

Similar Messages

Maybe you are looking for