MS6701 running in Pl0 mode not DMA

P4 2.66,MSI 6701 v1.14,Phoenix 6.00PG  9/11/02
Hi my machine has suddenly started running slowly,the C drive(seagateST3120023a)is running in Pl0 mode,and won't return to DMA,seagate think it may be corrupted Bus master drivers,does anyone know how to correct this,any help would be most obliged,thanks

I had this problem once with my DVD-ROM drive. Apparently the cause could highly be caused due to broken pins on the HDD. Broken pins may cause the HDD to run at PIO or to not run at all. If the pins are actually broken it is best to replace the drive. To make sure, try inserting another to check if it runs on DMA mode. Please notify me if you have managed to solve this problem.
Regards,
Sailendran Iswara Jothi

Similar Messages

  • X121e and Windows XP: only PIO mode (not DMA)

    I installed Windows XP on a thinkpad X121e. After actualizing all drivers from Lenovo I found out why the whole system was very slow: The internal hard disk is running only in PIO mode and reaches only 3 MB/s which is far to slow to work. I did not had this issue for years; normally a hard disk should run in DMA mode without any problems.
    I tried several things:
    - deinstalling the driver
    - reinstalling chipset driver)
    - changing the hard disk
    -  resetting the storage controller with a script (dmareset.vbs) found in the net 
    but I did not find any solution. The PIO mode is still on.
    I did install the XP system in SATA legacy (compatibility) mode. I could not try installing windows XP in ACHI mode because I did not find any ACHI driver for this chipset (HM65) at intel (only for Intel 5 series chipset exist F6 driver).  
    What could be the reason for the problem that DMA mode is not recognized by XP? Is it an issue for Lenovo (e.g. Bios update necessary) or does it have to do with Intel (problem with chipset driver)? 
    Thanks for any help,
    Thorsten
    Solved!
    Go to Solution.

    Hi thoral,
    I don't know if it will fix the P-I/O issue, but there is an AHCI driver for your machine on the Lenovo support site:
    Intel SATA Controller AHCI Driver
    Intel SATA Controller AHCI Driver
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • I have a mac osx version 10.6.8 no windows and i am trying to install a program but keep getting can not run in dos mode  ( the disk says on back works on intel mac with parallels or vm fusion) is this program not compatible with my mac?

    i have a mac osx version 10.6.8 no windows installed and i am trying to install a program but keep getting can not run in dos mode  ( the disk says on back works on intel mac with parallels or vm fusion) is this program not compatible with my mac?

    You run Windows in Parallels or Fusion. Then in Windows you install the program.

  • Help I itunes will not recognize my iphone or ipod. Trouble with USB driver, device not running in safe mode, and HDCP not supported.

    Help! When I connect my iphone or ipod touch to my computer, windows recognizes my device but itunes will not. I can still see my songs, videos, and access the itunes store but my phone and itunes store have no connection so it does me no good. I have for 2 days now tried every trouble shooting method posted with no luck. I think I may have finally found a lead. My Apple Mobile Device USB Driver is showing up under portable mobile devices while it is supposed to be showing up under universal serial Bus controllers from my understanding? Also, while running my diagnostic report under itunes it also says itunes is not running in safe mode, it is not showing enabled in windows firewall (which it is checked), and the HDCP is not supported. I don't know what to do? I am in tears here, someone please help!!!

    See Here for Device not recognised:
    http://support.apple.com/kb/TS1538
    Here for General Support:
    http://www.apple.com/support/
    This may also be helpful:
    AMDS for Windows
    http://support.apple.com/kb/TS1567

  • Installed iTunes 11.0.4.4 64-bit but window 8 pro 64-bit in task manager reports that iTunes is 32-bit.  Why?  Not running in compatibility mode.  Uninstalled and reinstalled.  Same result.

    Installed iTunes 11.0.4.4 64-bit version.  Now windows 8 pro 64-bit reports iTunes as 32-bit in task manager.  Why?  Both my computer and operating system are 64-bit.  ITunes is not running in compatibility mode.  All my music files are MP3.  I uninstalled iTunes and downloaded iTunes64setup.exe from apple and still having the same result.  This was a clean install by-the-way.

    Hello irie00,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1717
    Best of luck,
    Mario

  • ADF Faces is not supported on IE running in compatibility mode

    hi
    In the blog post "Running ADF Faces applications with IE 9 in IE 8 compatibility mode "
    at https://blogs.oracle.com/jdevotnharvest/entry/running_adf_faces_applications_with_ie_9_in_ie_8_compatibility_mode
    Frank Nimphius explains about headers to make IE browsers behave like a previous version (in compatibility mode), but ends with this support information:
    Very Important(!)
    ADF Faces is not supported on IE running in compatibility mode. If using ADF Faces on IE in production, make sure IE is configured to run in native mode. Compatibility mode may only be used during development if your IE version is not certified with the JDeveloper version you work with. In production then you need to make sure the IE version matches the JDeveloper certification matrix.Reviewing the Release 1 "Certification and Support Matrix "
    at http://www.oracle.com/technetwork/developer-tools/jdev/index-091111.html#Browsers
    it currently says
    "For Internet Explorer 8 and 9, only Native mode is supported. View Compatibility mode should be disabled. "
    But there currently are no hits when searching for "compatibility" in the Release 2 "Certification and Support Matrix "
    at http://www.oracle.com/technetwork/developer-tools/jdev/jdev11gr2-cert-405181.html#Browsers
    - (q1) ADF Faces is not supported on IE running in compatibility mode, how much of that applies to JDeveloper Release 2 and where has it been documented?
    many thanks
    Jan Vervecken

    Thanks for your reply Frank.
    Frank Nimphius wrote:
    its bug 13906617 "ADD ADF FACES NOT SUPPORTED ON IE COMPATIBILITY MODE TO THE DOCUMENTATION"
    I was unable to find bug 13906617 on My Oracle Support. Has bug 13906617 been published?
    thanks
    Jan

  • Getting error : This operation is not supported on a report server that runs in native mode

    Hi,
    I have installed SQLServer2008 Standard Edition in my system.
    Using SSRS 2008.
    I have added
    http://<serverName>/ReportServer/ReportService2006.asmx as web reference in my project.
    If i consume any method in ReportingService2006 am getting below error . 
    This operation is not supported on a report server that runs in native mode. ---> Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException: This operation is not supported on a report server that runs in native
    mode.
    How to solve this problem?
    Thanks,
    Thangakumar

    Hi Thangakumar,
    In Reporting Services Web service, there are two endpoints available for managing objects on a report server, ReportServer2005 and ReportServer2006. The
    ReportService2005 endpoint is used for managing objects on a report server that is configured for native mode. The ReportService2006 endpoint is used for managing objects on a report server that is configured for SharePoint integrated mode. From you description,
    your Reporting Services runs in native mode, but ReportService2006.asmx is used for SharePoint integrated mode. If you need to call Reporting Services Web service in native mode, please change the address to:
    http://<serverName>/ReportServer/ReportService2005.asmx
    If you need to call Reporting Services Web service in SharePoint integrated mode, please change the address to:
    http://<Server Name>/<Site Name>/_vti_bin/ReportServer/ReportService2006.asmx
    For more information, you can refer to:
    http://msdn.microsoft.com/en-us/library/ms155398(v=SQL.100).aspx
    Thanks,
    Albert Ye

  • When my Itunes diagnostic's finishes running it says Itunes not running in safe mode. What is that and how do I enable it?

    My Itunes diagnostic's say's that my Itunes is not running in safe mode. What is this and how do I enable it? I have the latest version of Itunes.

    you cannot update this software because you have not owned the major version of this software
    Shouldn't give away the secret of how easy it is.....

  • Xk02 is not running inthe  N mode

    Hi,
    I recorded a Bdc of XK02 but it is working fine in call transaction mode 'A' but not in MOde 'N'. Please help me out....
    Regards,
    Kranthi.

    Hi,
      Many SAP transactions behave differently in online mode and in Batch mode and this mode is determined by the SY-BINPT variable that can be controlled using the OPTIONS command in addition to the CALL TRANSACTION.
     For example, the error message that usually comes in status bar while you are running the transaction online might appear in a popup window when you are running that in batch. This will make your fields disabled for input. This OPTIONS addition will remove this problem
    The way to use the OPTIONS addition.
    Declare a work area of type CTU_PARAMS.
    Fill the fields of CTU_PARAMS. The field NOBINPT should be set to ‘X’.
    This will set the SY-BINPT to space. So now the transaction which you will be calling will run in online mode.
    Example.
    clear X_OPTIONS.
    X_OPTIONS-DISMODE = 'E'.
    X_OPTIONS-UPDMODE = 'S'.
    X_OPTIONS-CATTMODE = ' '.
    X_OPTIONS-DEFSIZE = ' '.
    X_OPTIONS-RACOMMIT = ' '.
    X_OPTIONS-NOBINPT = 'X'.
    X_OPTIONS-NOBIEND = ' '.
    call transaction 'BP' using T_BDCDATA[] options from X_OPTIONS.
    Note:
    Do not use the MODE & UPDATE additions when you are using OPTIONS. The mode & update values are passed in the CTU_PARAMS structure.
    Regards
    Kiran Sure

  • Unable to burn cds. Have run diognostics. i tunes not running in safe mode. invalid lower filters registry value. Failed while scanning for CD/DVD drives, error 2500. Please help.

    Unable to burn CDs using i tunes. Have run diognostics.    Summary:-   i tunes not running in safe mode.
                                                                                                                                        Invalid lower filters registry value.
                                                                                                                                        Failed while scanning for CD/DVD drives, error 2500
    Please help.

    That's why you want to make a backup of the registry. If you didn't make a backup, use MS system restore to go back. The only values you should remove are UpperFilter or LowerFilter - one or both may be in there and can be removed. If neither value exists, then that is probably why you can't burn and Windows is not recognizing your drive as a writable drive.
    ... an HP employee expressing his own opinion.
    Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

  • When i open my itunes of recent edition , i am getting error as  "itunes.exe has been set to run in compatabiltity mode " Though i reinstalled it several times from last days ,the problem is not solved. Please provide the solution asap.

    When i open my itunes of recent edition 12.0, i am getting error as "itunes.exe has been set to run in compatabiltity mode " Though i reinstalled it several times from last days ,the problem is not solved. Please provide the solution asap.

    Try iTunes for Windows: How to turn off Compatibility Mode.
    tt2

  • JApplet run in Debug mode but not in Run Mode in JDev3.1

    Hi All
    I am having a problem in running a JSP file which contain an JApplet. When I choose Run from the jDev, the applet seems to take a really long time to load and finally failed to load itself.
    However when i choose run from debug mode, the jsp run perfectly by displaying the applet.
    Any idea why?
    thanks for any help
    ka

    Hi All
    I am having a problem in running a JSP file which contain an JApplet. When I choose Run from the jDev, the applet seems to take a really long time to load and finally failed to load itself.
    However when i choose run from debug mode, the jsp run perfectly by displaying the applet.
    Any idea why?
    thanks for any help
    ka

  • "G4MX420D-T" NOT RUNNING in AGP mode

    I've got a gigabyte motherbourd that supports 2x AGP but the stupid card is running in PCI mode. How do you fix that. My graphics are now running slower than before I had a 3D card.

    You should use a motherboard that support AGP 4x. :]

  • Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode?

    Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode? Particularly when I have to do it before I turn on iTunes.

    Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
    iTunes for Windows: How to turn off Compatibility Mode

  • Running under classic mode - Standard Options

    In WLS 5.1 server, there was an option to run under classic mode in a UNIX environment.
    We just upgraded to WLS 6.1 and in the docs, http://e-docs.bea.com/wls/docs61/perform/JVMTuning.html
    it mentions classic mode available in NT but not in UNIX.
    Does anyone know if the java option -classic will work under 6.1 and if not, what
    the new option is.
    Elizabeth

    -classic asks the JVM to use the old non-HotSpot JVM. First off, why do
    you want to use it? It's most likely slower.
    -- Rob
    E Johnson wrote:
    In WLS 5.1 server, there was an option to run under classic mode in a UNIX environment.
    We just upgraded to WLS 6.1 and in the docs, http://e-docs.bea.com/wls/docs61/perform/JVMTuning.html
    it mentions classic mode available in NT but not in UNIX.
    Does anyone know if the java option -classic will work under 6.1 and if not, what
    the new option is.
    Elizabeth

Maybe you are looking for