MSI 4800 se 8x (8900)

I just bought of course a MSI 4800 SE 8X (ms8900) Card installed hardware and when I went to install drivers they will not take.
Says "Bad Data"after installation of drivers and then "video card not installed properly there may be problems."
When I go to look at driver version there is no information displayed for it.
I have tried uninstalling old drivers and even tried it in safe mode.
Are there know issues of installing to (home)xp? what can i do to correct this.
this is supposed to work with a 4xagp board correct?
here are my specs
1.6 P4
80 gig western dig 8/mb buffer
asus P4b533
2 sticks of 256 ddr 2100 total (512)
350 powersupply
O/S XP (home)
Old Card was A (Leadtek GF3 TDH)now removed
PLEASE HELP!
Thank you for reading
also the update program does not seem to work as well.

Ntorres,
Since your MSI Product is a Vid Card and not a  Motherboard and you posted in the nVidia/AMD/SiS Motherboard Forum, I moved the thread to Mutlimedia Forum for you.
Good Luck,
Richard

Similar Messages

  • Clocking MSI Ti4800SE-TD8X(MS-8900)

    Hi everyone! My question is: Can I clock my card to 300/650 without any extra cooling?? I have heard this somewhere that with the big fan on my VGA-card I can easily do so, but I thought maybe I should get some expert help before doing so if possible! So everyone who knows wheter it is possible to clock my MSI Ti4800SE-TD8X(MS-8900) (currenlty @ 275/554) to 300/650 please post a reply, bye!  :D

    ApA,
    When you get to those speeds it will be hit or miss. One board might, while an identical will not. It is all the luck of the draw with the RAM.
    Take Care,
    Richard

  • K7N2G + MSI Ti4800SE = no 8x AGP???

    Hi all
    I just bought a new MSI K7NG2 mobo and an MSI Ti4800SE-VTD8X (MS-8900) and can't get them to work in 8x AGP.
    I have enabled 8x support in the bios (ver 2.1) but 3DMark2001SE still reports it running 4x, though it identifies support for 8x
    In it's current state the graphics card is running a lot slower than it did in my K7N420Pro mobo. (a 3dmark score of 7000 compared to 10000 before)
    I'm using an AthlonXP2400+ 266FSB and 512MB of PC2100 (266Mhz) 2 sticks in DDR slots 2 and 3
    Does anyoone know how to make them run in 8x mode?
    Thanks in advance

    I've tried downloading the 2.03 version fron nVidia and it wont load.
    It unpacks all the files then just quits as soon as it starts loading the intall wizard (all it does is show the nVidia logo and then close)
    I unloaded the drivers which came with the CD  I had on and tried again and now can't load them either, so not sure which version they were
    help!

  • MSI TI4600 problem

    Hi
    i have a MSI TI4600 AGP8x(602-8900-070) but the detonator 45.23 drivers detect a TI4800 GPU... the card is VERY hot.... the system tº up to 47ºc !!!!!!
    please help me after burning my card

    eXPerience,
    Btw, a GeForce4 Ti4600 with 8X is a GeForce4 Ti4800. So your drivers are detecting the card correctly.
    Do not worry about the Temp, it is withing normal operating limits for that card.
    Take Care,
    Richard

  • Cannot set resolution with gnome-display-properties

    Hey all!
    After full system update my external display does not get detected/recognized properly by gnome-display-properties
    Though before upgrade it worked just fine!
    Tried to downgrade hal and xorg-server but without any success.
    Any ideas how to fix?
    Thanks!

    I have the same problem. I do, like You, own a ASUS P4S8X motherboard and a MSI (Ti4800SE-VTD8X(MS-8900))videocard.
    Because it was a brand new system i installed everything from scratch, so installed the MSI drivers for the videocard. Afterwards i thought i that it would be better to download the latest nvidia drivers. Since that time i have the same problem with the property settings of the videocard, Ghost Recon (original and supplied version) does not work anymore as goes for liveupdate of msi.
    There is a solution but i think it is CRAP. You have to uninstall nvidia drivers and reinstall the original msi drivers.... bla bla bla... Why is it that there are a lot of known errors with msi/nvidia drivers in conjuntion with the liveupdate, supplied games and with the settings?? I would like to see a (driver)update from msi which is for mortals. I'm not the hacking and phreaking guy, and so are more. I have spent a fortune on this card so MSI get started!!!!!!

  • Capture green strip

    I have a MSI Ti4800se VTD8x (ms-8900), and when capturing with WinDVR (I haven't any other programs installed - WINXP Pro is my OS), I get a green strip or line up the top of the video. I tried unplugging the source cable, and that only resulted in the dvr screen going black, with the green strip still there. My Country standard is PAL (Australia). When the NTSC_M standard is selected under Device > Video Input, the green strip disappears (a thinner white/grey line replaces it with white dots), but the image gets stretched, as you would predict. These lines are around 8-2 pixels in height. I remember it hasn't always been there.
    P4 2.6gig
    Asus p4s8x-x
    512mb pc2700 ddr ram
    winxp pro sp1

    I have found the problem is not any hardware problem, as both Virtualdub and iuVCR capture without any visible glitches (except those of bad codecs at low compression :P). It is purely due to Intervideo WinDVR 2.0... I might try an update.

  • Ti4800SE Overclocking !!!

    Hi, there... can anyone help me, please ?
    I have a MSI Ti4800SE 8x (MS-8900-VTD).
    Default is 275/555.
    I can get 302/640... in the maximum... no distorsions...
    Is it normal that the core limit is 302 ?
    Help me, please.
    Thanks in advance,
    Diego.

    Quote from: ferohh on 01-March-05, 04:39:20
    I tried to overclock my p4. 2,66ghz to 3.18ghz.
    l increased the cpu fsb only since the multiplier is fixed at 20x.
    l tried to change it but couldn´t.
    l then increased my cpu voltage from 1.525v to 1.732v.
    At 3.2ghz, the computer was on and restarts automatically, so l turned it to 3.18ghz.
    does it mean the cpu will not overclock further or l need a new cooler?
    I did not overclock anything except the fsb.
    any help?
    I have a 2.6C Northwood pentium 4 on an MSI 875P Neo2-FISR mobo.  On air I'm able to get it to about 3.14Ghz stable.  I don't believe it's a good idea to go past 1.6 for the voltage, from what I've read, voltage doesn't help too much with the northwoods.
    I can overclock mine higher without any significant changes in temperatures, but the overclocks aren't stable and the system freezes up from time to time.  I'm using Kingston HyperX PC4000 DDR, which can run at up to 500mhz, so I can do a 1:1 ratio on the overclock.  I'm using a modular 500-watt power supply, Arctic Silver 5 and a huge honking Swiftech heatsink with an 80mm fan.

  • AMD 3000+ cannot set the fsb in order to boot

    Hi,
    My system below worked fine with an AMD 2100 chip. I recently bought a 3000+ chip and slotted in to my PC - all booted up fine.  I then changed the FSB within bios to 166 - and then rebooted - the machine didn't boot and I had to clear the CMOS.
    I worked out that I cannot set the fsb to anything above 139 fsb else the machine won't boot and I have to reclear the CMOS...I have no idea what to do
    Anyone got any ideas pleaaaaseee?????
    btw I took the cpu down to the dealer and it worked fine there.
    AMD Barton 3000+ (333)
    2 x 256mb PC2700 ram
    MSI 4800 AGP 8X videocard
    Firewire Card
    DVD RW
    CD RW
    80 Gb HD
    120 GB HD
    PSU 350w - +3.3v / 28a
    +5v / 30a
    +12v / 15a

    Hi,
    Sorry my fault...
    but before I give you my system spec - I stuck in a 550W power supply and all is fine.
    However when I clock it up to 166 system crashes - better ram needed I guess.
    But FSb at 160 is fine....
    Considering its warm weather at the mo - my machie hits around 50 -55 degrees when playing something like fs2004.
    Thanks for your replies guys!
    M
    AMD Barton 3000+ (333)
    2 x 256mb PC2700 ram (non branded)
    MSI KTV4-L MB -
    MSI 4800 AGP 8X videocard
    Firewire Card
    DVD RW
    CD RW
    80 Gb HD
    120 GB HD
    PSU 350w - +3.3v / 28a
    +5v / 30a
    +12v / 15a

  • MSI MS-8900 (Ti4600-VT2D8X) Problems

    Two major problems, and one lesser problem:
    1.  The fan on this thing is absolutely deafening,  I figure it must be a malfunction.  Anyone else feel this to be extremely noticable?
    2.  Packaging says 128MB memory, but all utilities (nVidia / MSI / Windows) show it as 64MB.  Anyone else have a similar problem?
    3.  Lesser problem -- I replaced an ATI Radeon 9700 Pro because I was receiving huge numbers of graphics device failures (they kinda came in spurts, when I would do something - like download / install Windows updates).  Before I went out to the nVidia site and installed the most current version of the drivers (43.45) I would experience the same thing.  Haven't had a graphics device failure since the driver updates, but get weird jittery screen every once in a while.
    I'm returning to the ATI card until I get some answers.

    Serin,
    I agree send the card back. I have had that version of MSI card and did not have any noise from the fan.
    Sorry,
    Richard

  • Problems msi gf ti 4800 se

    i have problem with playing games, it seems by post its quite common. game starts to load then minimizes to task bar and cannot be reopend. its new pc, win xp corp, 256mb ddr, jetway v266, onbrd sound, no on brd graphics, cpu : xp 2400, latest nvida drivers (44) direct x 9, power supp is 350w.
    i have changed agp from auto to 4x in bios, and init vga driver from boot from pci to agp.
    sometimes if i keep trying to get / open game from task bar pc with crash ie reboot.
    any ideas please?
    regards geoff

    Quote
    Originally posted by alpha_leader
    hey djgeoff, i also have the same problem with my comp but i have found a way to fix this.  When you start the game wait till the screen goes black then hold Tab and Alt at the same time until the game goes to its main menu.  After the main menu comes up up can let off of Alt/Tab and go on with your game. Some games you have to wait till you are playing the game till you can let off. Hope this helps.
    thanks, what a performance though! ive been advised by another guy to try updating mother brd drives so im gonna do that 1st, but as the pc is not at my location ( i built it for someone else)i cant get to it till week end. thanks anyway will bare ur info in mind
    regards geoff

  • FX5200-TD128LF on MSI Neo3-F ???

    Does anybody know if the videocard MSI FX5200-TD128LF AGP works on MOBO MSI K8Neo3-F ??
    The list of compatible card is in: http://www.msi.com.tw/html/products/mainboard/agr/7135agr.pdf, but this list is final?
    The MSI part number of this VGA car is: MSI Part No: MS-8998-Z01
    Anybody probe instead this vgacard in this motherboard??
    Thanks!

    Yes "Dude"
    I am fully aware of the AGR Slot.
    These are the MSI Cards that were tested with the mobo:
    Quote
    8 MSI MS-8863 GeForce 4 MX 460 64MB/SDRAM 4.17.00.30.06 4X Pass 6.14.10.6681
    9 MSI MS-8907 GeForce FX 5200 64MB/DDR SDRAM 4.34.20.22.00 8X Pass 6.14.10.6681
    10 MSI MS-8911 GeForce FX 5200 128MB/DDR SDRAM 4.34.20.15.00 8X Pass 6.14.10.6681
    11 MSI MS-8919 GeForce FX 5200 128MB/DDR SDRAM 4.34.20.23.08 8X Pass 6.14.10.6681
    12 MSI MS-8923 GeForce FX 5200 Ultra 128MB/DDR SDRAM 4.34.20.23.00 8X Pass 6.14.10.6681
    13 MSI MS-8929 GeForce FX 5900 128MB/DDR SDRAM 4.35.20.18.04 8X Pass 6.14.10.6681
    14 MSI MS-8931 GeForce FX 5600 Ultra 128MB/DDR SDRAM 4.31.20.51.00 8X Pass 6.14.10.6681
    15 MSI MS-8936 GeForce4 MX4000 64MB/DDR SDRAM 4.18.20.42.00 8X Pass 6.14.10.6172
    16 MSI MS-8936 GeForce FX5500 128MB/DDR SDRAM 4.34.20.66.03 8X Pass 6.14.10.6172
    17 MSI MS-8946 GeForce FX 5950 Ultra 256MB/DDR SDRAM 4.35.20.32.16 8X Pass 6.14.10.6172
    18 MSI MS-8959 GeForce FX5700LE 128MB/DDR SDRAM 4.36.20.30.10 8X Pass 6.14.10.6681
    19 MSI MS-8975 Nvidia GeForce 6800 128MB/DDR SDRAM 5.40.02.12.01 8X Pass 6.14.10.6172
    21 MSI MS-8952 ATI Radeon 9250 128MB/DDR SDRAM 008.017D.031.000 8X Pass 6.14.10.6476
    41 MSI MS-8806 Nvidia RIVA TNT2 32MB/SDRAM 2.05.17.03.00 4X Pass 6.6.8.1
    42 MSI MS-8831 GeForce GTS Pro 64MB/SDRAM 3.15.01.00.07 4X Pass 6.6.8.1
    43 MSI MS-8847 GeForce 4 MX 440 64MB/DDR SDRAM 4.17.0045 4X Pass 6.6.8.1
    44 MSI MS-8851 GeForce 3 Ti 200 64MB/SDRAM 3.20.00.18.11 4X Pass 2.9.5.8
    45 MSI MS-8852 GeForce 2 MX 100/200 32MB/SDRAM 3.11.0148 4X Pass 2.9.5.8
    46 MSI MS-8860 GeForce 4 MX 440 64MB/SDRAM 4.17.00.24.52 4X Pass 2.9.5.8
    47 MSI MS-8861 GeForce 4 MX 440 64MB/SDRAM 4.17.00.24.46 4X Pass 2.9.5.8
    48 MSI MS-8870 GForce 4 Ti 4200 64MB/DDR SDRAM 4.25.00.29.10 4X Pass 2.9.5.8
    49 MSI MS-8872 GeForce 4 Ti 4600 128MB/DDR SDRAM 4.25.00.27.33 4X Pass 2.9.5.8
    50 MSI MS-8879 GeForce 4 Ti 4200 64MB/DDR SDRAM 4.25.0032 4X Pass 2.9.5.8
    51 MSI MS-8888 GeForce 4 MX 440 64MB/DDR SDRAM 4.18.20.03.00 8X Pass 6.6.8.1
    52 MSI MS-8889 GeForce 4 Ti 4200 128MB/DDR SDRAM 4.28.20.05.02 8X Pass 6.6.8.1
    53 MSI MS-8890 GeForce 4 MX 440 64MB/DDR SDRAM 4.18.20.07.23 8X Pass 6.6.8.1
    54 MSI MS-8891 GeForce 4 MX 440 128MB/DDR SDRAM 4.18.20.02.21 8X Pass 6.6.8.1
    55 MSI MS-8894 GeForce 4 Ti 4200 128MB/DDR SDRAM 4.28.20.05.11 8X Pass 6.6.8.1
    56 MSI MS-8895 GeForce 4 MX 440 64MB/DDR SDRAM 4.18.2007 8X Pass 6.6.8.1
    57 MSI MS-8900 GeForce 4 Ti 4800 SE 128MB/DDR SDRAM 4.28.20.21.00 8X Pass 6.6.8.1
    58 MSI MS-8904 GeForce FX 5800 128MB/DDR SDRAM 4.30.20.23.05 8X Pass 6.6.8.1
    59 MSI MS-8948 GeForce FX 5700 128MB/DDR SDRAM 4.36.20.19.06 8X Pass 6.6.8.1
    66 MSI MS-8988 GeForce 6600 256MB/DDR SDRAM 5.43.02.42.02 8X Pass 7.1.2.5
    Most of those cards have the exact same interface as your Vid Card, so it will work.
    The you look at all the 5200s tested "Dude" you will note:
    Quote
    9 MSI MS-8907 GeForce FX 5200 64MB/DDR SDRAM 4.34.20.22.00 8X Pass 6.14.10.6681
    10 MSI MS-8911 GeForce FX 5200 128MB/DDR SDRAM 4.34.20.15.00 8X Pass 6.14.10.6681
    11 MSI MS-8919 GeForce FX 5200 128MB/DDR SDRAM 4.34.20.23.08 8X Pass 6.14.10.6681
    12 MSI MS-8923 GeForce FX 5200 Ultra 128MB/DDR SDRAM 4.34.20.23.00 8X Pass 6.14.10.6681
    20 Unika FX5200 SP5208 GeForce FX5200 64MB/DDR SDRAM 4.34.20.42.00 8X Pass 6.14.10.6172
    Just about every type of 5200 chipset produced was tested for all the different memory combinations.
    Ok "Dude"?
    Richard

  • MSI K8N Neo4 Platinum SLI sound needs -5V; newest Antec 550W has no -5V rail

    I came within a whisker of ordering a non-returnable  3700 Venice, MSI K8N Neo4 Platinum SLI mobo and an upgraded Power Supply, Antec's newest 550W PS the TP2-550 EPS12V ($117).  This has dual 2x24pin 12V 19A rails and is touted as the new V2.0 EPS12V/ATX12v compatible power supply for high performance SLI systems.  By accident I came across a page at MSI for this mobo
    http://www.msi.com.tw/program/products/mai...ail.php?UID=641
    At the end is this warning:  MSI Reminds You...
    • For this model, you must use a Power Supply which has a -5V pin supply. Also, the users manual which I downloaded on Pg 2-10 says the same thing
    The above Antec PS specs do not  show a -5V rail, nor does an Enermax 600W I looked at.  The V2.0 specs for ATX12v which added 2x24pin 12V rails dropped -5V rail from the spec and it appears MSI is not conforming to the spec (See Antec response at end) None of the web sites selling these PS & mobos contain any warning.  I vaguely recall from a forum a while back it may have something to do with the Soundblaster system in the mobo.
    http://www.antec.com/us/productDetails.php?ProdID=22551 (click specifications)
    Isn't this a major showstopper which is going to cause a lot of grief for those of us upgrading to SLI systems using this mobo and upgrading our PS to the newest & best power design?  We won't know the PS won't work until we build the system.
    Regards, Ron
    Antec reply to me:
    >>>>Thanks for the link. Since MSI's website does state the motherboard needs the -5v, the True550EPS12V will not work with this motherboard. The Standard (http://enhanceusa.com/documents/atx12v_v2.01.pdf) has removed the use for the -5v rail and it is no longer needed. MSI has not manufactured that motherboard to the Standard. Finding an ATX12V v2.0 power supply with the -5v might be hard to find. You should contact MSI for a compatibility list of power supplys that were tested to work with the K8N SLI Platinum.

    Quote from: ccve3 on 21-May-05, 07:27:40
    Wow!!  syar2003 thanks for that post.  I've spend an hour going through it &  fasteddies links.  Now I are a power expert.  The dual rail argument is enough for me to go back to the MSI K8N Neo4 Platinum SLI with one of the single rail PS -5V units listed by fasteddie. The only question left now refers to computerpro3  recommendation on ultra power supplies for SLI 
    >>I quite simply wouldn't dream of putting anything else in my machine. Keep in mind, this section is for 2x 6800 models, not the 6600's which most any good psu will handle (like Antec Neopower, ocz 520, etc). . Pc Power and Cooling 510 Deluxe SLI edition (refer to list)
    2. Zippy/Emacs 550-700w models
    3. OCZ 600w (personally I would get the pcp&c for the price, but it's been proven here, so I'll be fair...). 
    These are really high end, expensive and only 3-4 choices. Since I'm getting one 6800GT and eventually another & possibly eventually a 4800 X2, I was hoping the OCZ 520W would do it but computerpro3 says Powermaster 520 isn't good enough for SLI.  I found that there is an OCZ 600W ATX12 dual rail which surprisingly has a -5V rail needed for K8N Neo4 SLI Soundblaster.  Will this meet computerpro3's preference for a high end PS for SLI systems even though I'm losing the 1 rail advantage.  Maybe the 600 Watts just overwhelms the 1 rail/2 rail question.
    Thanks again for the teriffic help
    Regards, Ron
    Wondering what you settled on.  I got the Antec TP550 and it's flawless on the board.  I even have the older 20pin model which works perfectly (including sound).  If you really wanted what I would consider to be a top dog (pcpower and cooling), and find the -5v rail missing, all you have to do is place a phone order and request they add a -5v rail.  It's a minimal cost and a total solution for having everything.  Just my $0.02

  • Can I put a amd 64 X2 3800+ on a motherboard msi K8N neo2 platinium ?

    hello
    I'm sorry for my bad english but I'm french ....
    can I put a amd 64 X2 (dual core) 3800+ on a motherboard msi K8N neo2 platinium ?
    Which is the highest processor which I can put on this mothercard ?
    thanks well for your help
    @+

    I'm sorry but I dont find the info on the msi website. I listened it ! but I don't know the adress that you give me.
    thanks well for the adress : 
    but I don't know if it's e4 or e6 or manchester .... if you help me for that proc :
    http://cgi.ebay.fr/processeur-AMD-Athlon-64-X2-dual-core-3800-socket-939_W0QQitemZ290129683087QQihZ019QQcategoryZ80141QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
    and that : http://cgi.ebay.fr/AMD-Athlon-64-X2-4800-socket-939_W0QQitemZ190124445607QQihZ009QQcategoryZ80141QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
    and that :
    http://cgi.ebay.fr/AMD-ATHLON-64-X2-4200-4-4-GHZ-1MB-CACHE-939-DUAL-CORE_W0QQitemZ270133637708QQihZ017QQcategoryZ80141QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
    I don't want to make a error ....
    thanks very well for your help
    @+

  • MSI Ti4200 128MB card availability

    My son's friend is building a system very close to the same as mine and he has most of the parts now that he bought from NewEgg. The problem is that he wants to use the MSI Ti4200 video card that I have but he can't seem to locate one.
    Has MSI stopped producing these video cards or is the demand so great that nobody has any? I haven't even been able to locate many of them from Price Watch or other search engines either.
    Any ideas where he can get one would be appreciated.
    Thanks
    Mike

    Here is one but is currently out of stock.  Here and Here is another and cheaper.  Im giving you all these sites just in case you dont feel like you can trust one or another.   Oh and i have to throw this in there a 4800 for only 20 bucks more  :D Here Good luck

  • Curve 8900 not connecting to Desktop Software version 6.0.0.40

    I am not able to connect my Curve 8900 to the BlackBerry Desktop Software Version 6.0.0.40.  When I connect via USB it asks for the password  and then it says connecting in the bottom right corner - it never connects.  I also have the Blackberry Device Manager version 6.0.0.11 running at startup but it does say that the device is connected.  There are no errors in the device manager.  I am running Windows XP SP3.

    No one else replied, but I seem to have solved the problem, more or less, so I thought I'd report back.  See previous message for the setup.
    1) First attack - make a concerted effort to truly undelete the 2 old versions of Desktop Manager.  The typical list of "how to cleanly uninstall" (link above) is incomplete.  This document is much better: http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB02206 . 
    The part that matters is near the bottom, under Additional Information.  Basically, take a shovel to the Registry and start digging out absolutely every reference to "Research In Motion" using the Edit/Find.  I added to that recommendation a search on "BlackBerry" and even, for good measure, all the Roxio software (and removed the Roxio folders just like the Research In Motion folders).  I can't say which part did the trick, but I could see some of the Install and Uninstall list items go by.
    This finally killed the zombie entries in the Add/Remove Programs list, and prevented the Windows Installer attempts on unfindable .msi files.
    2) Problems: In killing Roxio, I may have accidentally munged a Sonic registry entry.  When I installed the Desktop Manager fresh from the CD, it complained about a registry-style confusion with Sonic software.  It allowed me to continue past that point anyway.
    I can't fix that, but I will be swapping in new PCs in a couple of months and can live with whatever reduced functionality might be involved.
    When I started the Desktop Manager for the first time, I could see Windows Installer popups fly by in the background, but none of them stayed open, and perhaps that will be a one-time problem.  Otherwise, if related to the Sonic issue, at least it's not a functional problem that prevents me from using the Desktop Manager.
    3) I can now connect to the Desktop Manager via USB, but am unable to successfully update the device software.  It goes through the backup process apparently successfully, but issues an error message about "Fatal error" before installing much (any?) of the new software.  Seems to be a benigh error - phone still works.  Because this will be reinstalled on a clean PC in a couple of months, I can pass on upgrading the device software until then.
    4) All I care about is the ability to synch the contact and calendar data and, by god, that seems to be working!!!  And it's much faster than my older BB.
    If you're reading this, it's because you have an ongoing nightmare...  You have my sympathy. 

Maybe you are looking for