MSI 785GM-E51 can't install audio drivers

Hey, I would be grateful if you could help me with this problem.
When I try to install the audio drivers of this mobo(785GM-E51), Windows 7 can't find them. It offers me another set of drivers - that of VIA's, but it should be Realtek's. Normally it wouldn't be a problem, but I have a an issue with front panel microphone jack(it's not working), so I want to install the proper drivers. I tried disabling auto-installing option of Windows 7, and then install the drivers that MSI offers officially , but still the computer acts as if I didn't install anything.
EDIT: It seems that I have a different motherboard - in the document I have(about the parts of PC), it says that the computer has MSI 785GM-E51, but now that I checked the informationa about motherboard in the Windows itself, it appaars that ASrock M3A770DE is in the case. So I guess the fact that I can't install the MSI's drivers is because of different mobo. I have no idea how  this could've  happened.

>>Posting Guide<<
Why don't you open up a case and read the model? Is the computer secured with some sort of sticker that voids warranty if opened?

Similar Messages

  • Re: MSI 785GM-E51 and memory modules problems -l- Split

    I am using AMD PHENOM II 1055 125w CPU on MSI 785GM-E51.  Memory Corsair XMS3 DDR3-1600 x4
    I can put memory in slot 1 and 3 it will boot fine.
    If I install DDR3 in slot 1 and 2 the system will not boot. If I full populate all the memory slots it will not boot
    In both scenario's after the system does not boot and go back to just using slots 1 and 3 the system boot with CMOS checksum error and need to go in to BIOS setup. All the changes need to be made again, saved and exit and it reboots fine.
    I have already attempted to setup the memory speed to 1333 and 1066 with no luck. Any ideas?
    785GM-E51/BIOS 2A0, Phenom II T1055 @ 2.8 GHz, 125W Stock AMD Heat sink&Fan
    Corsair  2x2GB CMX4GX3M2A1600C9, 9,9,9,24, 1T, 1.47V, 1600 MHz --------- 2 kits
    ESXi 4.1
    Antec 650 Truepower
    ATI x600 PCI-e
    Adaptec AAR-2610A with 5 WD Caviar RE WD2500SD-01KCB0  250GB RAID-5 Configuration
    NEC ND-2501A DVD-Burner

     Topic split, don't hi-jack other peoples topics.  >> Please read and comply with the Forum Rules <<
     Provide more information on your system, read this:  >> Posting Guide <<
     See my signature for example of information to provide.

  • MSI 785GM-E51 - Amount of usable RAM in Windows 7 Ultimate 64bit

    Hello i have the following system:
    Mobo: MSI 785GM-E51
    Bios: AMI v 2.3
    CPU: AMD Phenom II 955 BE @ 3.2Ghz
    Memory: 2 dimms of  ( KINGSTON KVR1333D3N9/2G DDR3 2GB PC10666 1333MHZ VALUE RAM ) , Total 4Gb
    GPU: Sapphire Radeon X1950 Pro with 256mb RAM
    OS: Windows 7 Ultimate 64bit
    The specific motherboard has an onboard ATI 4200 vga. I've installed the Radeon x1950 pro from day 1 and in the bios settings the onboard vga option reads disabled. However windows 7 during install always recognize both x1950 pro an 4200 and provide drivers. In windows device manager i have the 4200 disabled. However windows display that from the 4GB of installed ram only 3,75GB is usable. Is this normal? Isn't supposed to have all my memory available since the onboard vga is disabled? And if it is disabled from start how windows 7 detect it during installation and suggest corresponding drivers ? I'm looking forward for your opinions and suggestions
    Thanks in advance...

    Turn memory >4GB remapping on, see your manual how to do it.
    And stop bumping your message, it's NOT allowed.
    >>Please read and comply with the Forum Rules.<<

  • CMOS Checksum Error on MSI 785GM-E51

    Hi, I have 2 years old MSI 785GM-E51. Approximately 2 - 3 months ago, my PC just go hang without any reasons, even the mouse / keyboard won't respond to anything.
    After I reset, sometimes it's fine, but sometimes it's hang again, the interval is random. Sometimes it even hang when in the POST or when i enter BIOS setting.
    After several restart, it's sometimes gives me CMOS Checksum Error, so I decided to reset the CMOS using jumper method. After that my PC just works normal.
    Until a week ago, my pc start to hang randomly again, the symptom is similar but this time sometimes it's not hang, but the PC just restart immediately with black / white / blue random pattern
    displayed momentarily on the screen. And it always display CMOS Checksum Error. I already tried reinstalling Windows, and updating BIOS via flash disk from Live Update 5, no use.
    I already tried to plug out my VGA and using the onboard one, still crash / hang randomly. I also test Memtest overnight with passing 11 pass without error.
    Is it my motherboard already dead? or it's my PSU? CPU?
    Here is my complete specs:
    AMD Phenom II X4 955BE
    MSI 785GM-E51
    DDR3 Dual Channel 4GB RAM (corsair, forgot the model)
    Radeon 5770
    WDC 1TB
    WDC 1.5TB
    Amacrox Free Style 650W
    Thanks in advance.

    Quote
    Yesterday i desperate enough and change some BIOS settings, and
    surprisingly, the CPU is much cooler!
    Try entering bios, hitting f6 for optimized defaults then save and exit. See if problem persists.
    Quote
    As far as I remember, no, the crash / hang time i remembered is when POST / boot / startup / browsing / install app / playing games / copy file.
    And one more thing, when it hangs, it really hangs, not just the windows, sometimes it even not respond to reset button, so i have to power it off. But sometimes it respond
    to reset button, but with quite a long delay, it could half a minute i think.
    Have you tried re-seating the cpu,memory and all of the power connectors etc?
    What are the amp ratings on the 12v rail of the PSU? I found this on thier website but dont have time to dig furthur: Quote
    4-Channel 12V Rails Design
    Although the VGA you list only needs 24a on a 12v rail.
    Quote
    what's cpuid / ram timings / spd? where i can look at it?
    http://www.cpuid.com/
    When the program opens, take a screen shot of the tab that describe how your ram is running, It will show the current timings,speed, single or dual channel. Also take a ss of the spd tab, which will show the jdec standards that apply to that ram and the xmp profile. Then post the SS's to imageshack or the link and link them.

  • MSI 785GM-E51 coaxial?

    Hi,
    I've bought a HTPC based on MSI 785GM-E51. I haven't noticed that this motherboard has only HDMI and 6ch output for sound. I've A/V receiver with no hdmi-in connector. My question is if one of 6ch outputs is coaxial?
    Sorry for my english - haven't used it for years.

    Quote
    I've bought a HTPC based on MSI 785GM-E51.
    I presume you bought this system prebuilt then? If the system builder did not provide the mainboard manual, you can download it from here:
    http://eu.msi.com/index.php?func=downloaddetail&type=manual&maincat_no=1&prod_no=1866
    The S/PDIF bracket is an optional extra with this mainboard. You can ask the system builder if they have any available, or you may be able to find one elsewhere.

  • System unstable - MSI 785GM-E51 and OCZ3G1600LV2G

    I had random freezes since I built the system(20 days ago). But, intially freezing up once a day or so. Recently in the last 10 days, the freezes are more often (sometimes within 5 to 10 mins). Basically system freezes at stock settings.
    Running Prime95 to test
    Blend test stops mostly within the first few seconds reporting hardware error. The other two types work well. Did not let them go past few mins.
    Also, changed the CPU to FSB ratio to 1:4. So, BIOS indicates 1600Mhz. Changed DRAM Voltage to 1.65V and system still unstable. Changed back.
    Also, when I enable the MSI board features to Unlock CPU and ACC, the sytem does not boot under and stock settings.
    MSI 785GM-E51 BIOS 2.4 (had 2.3 before)
    AMD Athalon X3 435
    4GB RAM (2x2) OCZ 1600Mhz DDR3 OCZ3G1600LV2G (recommended voltage 1.65V)
    1TB Hitachi SATA
    Samsung 22x DVD/RW
    Enerma 05W power supply ETK405AST
    ETK405AST

    Run a test @DDR3-1066 first.
    Quote
    OCZ3G1600LV2G
    The model number is incomplete (not possible to find any match on the OCZ Product Pages).
    Can you write down the model number as it appears on the modules themselves?
    Quote
    Voltage 1.5V  (Mfg specs.. say 1.65V)
    Those 1.5V do not indicate the voltage set in BIOS but the JEDEC Compliant default voltage for DDR3 modules (1.5V +/- 0.075V).  1.65V is an overvoltaged rating that is needed to compensate the overclocked/undertimed ratings OCZ adverises for those modules.

  • Can't install audio for hp 530...it says no media device

    please help i can't install audio on my hp530 

    Hi peshi77,
    Welcome to the HP Support Forums! I see you are trying to install your HP Laserjet P1006 to your computer running Windows 8.1, but everytime you attempt to extract the files it crashes. After some research I see there were no updated drivers made available for the Windows 8.1 OS, you must install the Hostbased Plug and Play Basic Driver, to get the basic printing functions. Please click on the link below to download and install:
    HP LaserJet P1000-P1500 Hostbased Plug and Play Basic Driver
    Once downloaded, please follow the on screen instructions. I hope this helps!
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Got a problem with BIOS in my board MSI 785GM-E51

    i have a MSI 785GM-E51 board,i got a problem with the graphic card bus interface,it still run in 8x not in 16x
    i try to disable a onboard graphic on BIOS,but i not find it.
    and last i try to update BIOS to v2.4 n' not work too.
    this a example;

    Quote from: Bas on 08-March-10, 21:21:36
    You do not need to disable the onboard.
    As for the plug-in card, there is nothing in the BIOS to make it work 8x or 16x.
    Make sure your card is seated correctly, else it will work but at lower number of lanes.
    What program is telling you it's 8x?
    GPU-Z

  • MSI 785GM-E51 Fails POST

    I have built a new machine with the following Specifications: (All new parts)
    Mainboard: MSI 785GM-E51
    RAM: Crucial Ballistix sport 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 Desktop Memory Model BL2KIT25664BA1339
    CPU: AMD Athlon II X3 455 Rana 3.3GHz Socket AM3 95W Triple-Core Desktop Processor ADX455WFGMBOX
    PSU: CORSAIR Builder Series CX430 V2 (CMPSU-430CXV2) 430W ATX12V v2.3 80 PLUS Certified Active PFC
    Hard Drive: Western Digital Caviar Green WD6400AACS 640GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive
    This build initially started up but then failed POST. I am getting what sounds like the normal beep followed by two short beeps and then nothing. Earlier in the day, it started up and I reviewed the BIOS settings. Shut it down and moved it from one work bench to another, inserted the O/S CD and tried to start it. Would not pass POST. Nothing had changed from when it started only a few moments before. I have removed all expansion cards and the CD drive. Disconnected everything from the main board except the RAM and the hard drive. Reseated the RAM. Tried only one stick, twice. Still the same POST of one beep followed by two rapid beeps. Using onboard video. Tried VGA and HDMI connections. 
    I have build many computers but this one has be stuck.  :(
    Any ideas? Thanks

    Excellent advice on this forum.    Thanks to all. Up and running fine now.
    I had some small washers in my shop so I put a small washer under each of the standoffs. This raised the motherboard enough to prevent any shorting.
    The advice on the toenail clippers was good. Would have done that had I read the note in time.
    The "two many standoffs" is also good advice. I made that mistake once early in my building career. Especially important when upgrading. 
    Again, Thanks to all, 
    SL

  • MSI 785GM-E51 and memory modules problems

     
    Could anyone help me with one problem. I have motherboard MSI 785GM-E51 and 4 memory modules GOODRAM GR 1333D364L9/2G. But when I'm inserting ALL modules my system not starting (even POST procedure). So working variants - when I'm inserting:
    - one module in first (boot) slot
    or
    - they inserted in first and third memory slots
    Any ideas?

    It is not motherboard problem, but processor itself - I have AMD Phenom II X4 965 Black Edition 3,4 Ghz Core Revision C2 and this revision (according to the article: http://www.fcenter.ru/online.shtml?articles/hardware/processors/27650#02) has problems with support memory modules DDR3-1333 Mhz more than 2 modules. Conclusion - either adjust BIOS settings concerning memory timings and memory controller voltage or replace this kind of processor with the same type but with core revision C3

  • MSI 785GM-E51 - onboard LAN not working

    Hello,
    I've problem with MSI 785GM-E51 board. Suddenly, when I booted system (Ubuntu) I've noticed that there is no network and even network device (lcpci showed no network devices). Is it possible that the onboard LAN got damaged? I tried to check BIOS and renabled oboard LAN/remove PCI devices/unplug power for a few hours etc but nothing helped. Any suggestions?

    LAN card has worked earlier?
    PSU is starting to fail? If things work after several re-boots that may very well be the reason.

  • How can I install gutenprint drivers for my Epson Stylus Color 440?

    Good day all!
    I have and old and useful printer -Epson Stylus Color 440- and just bougth a cable for connecting it to USB port. Add a new print on its Print and Scan Preference Panel and it was recognized inmediatly, but I was told there was not any driver to that printer.
    Tried to set "Epson Stylus Color Series" on its driver but when I went to print, printer seemed to work but does not eject any ink. It seemed as if I were ran out of ink; its car moved over the places occupied by the photo and sounded as normal printing, but not a drop of ink. I checked on an older windows pc, and ink is full, printed normally. I also looked for its drivers on Epson pages, but it seems there are only available for previos Mac OSs, not for X.
    A son told me that in his Snow Leopard MacBook White there's a dirver called "Epson Stylus Color 440 gutenprint" on his Print and Scan Driver Menu; haven't tried to print from his MacBook yet, and as I searched, those are open drivers.
    I wonder if I can download and install that "Epson Stylus Color 440 gutenprint" from the web, of if there's a way to copy it from my son's Macbook, when he comes and check.
    Thanks in advance for your help.

    How can I install gutenprint drivers for my Epson Stylus Color 440
    Download then isntall:  http://gimp-print.sourceforge.net/

  • Installing audio drivers

    wondering how you install audio drivers.
    have digital dj equipment and a new mac (10.8.1)
    needed to install beta drivers from their site since mac is so new.
    but audio still not working and wondering if i installed correctly.
    i basically downloaded each driver, but is that it?
    do i need to save them anywhere or move them anywhere?
    thanks for any help.

    MacBook Pro Cirrus Logic Audio device driver
    http://www.lonare.com/topic/230/macbook-pro-no-sound-in-windows-7-solved/

  • Problems installing audio drivers

    Hi,
    I have a x61 notebook, and after reinstalling Win XP (pro, SP3) I can't get the audio to work. I have tried to install the drivers from Lenovos web site (7ka113ww.exe) but get an error message saying: "The HDA Audio bus driver is required and not found".
    In device manager I have two uninstalled devices, one PCI Device and on Unknown device. Where can I download the HDA Audio bus driver?
    Some threads (e.g.http://forum.notebookreview.com/showthread.ph​p?t=195883) says that I shall install Universal Audio Architecture (UAA) High Definition Audio class driver (Q888111) for Windows XP, but I only find this for SP 1 or 2, not for SP3 as I have. If I try to install the one for SP2, I get another error message saying "the service pack version is newer then the update you are applying". Anyone know where I can find the correct drivers?
    Edit: I sent an email to Microsoft to obtain the 888111 hotfix, but got a response back saying that this hotfix is included in Windows XP SP3, so I should already have it on my machine.
    Thanks, TJ
    Message Edited by TJ on 04-21-2008 04:58 AM

    You'd likely have to install the UAA driver before you but on SP3.
    If it's already included in SP3 then find the .inf file, or whatever file, name and point the unknown device in the device manager to that.
    But yes... it seems as if there are problems with high-definition audio and SP3; maybe try this:
    http://boredsysadm.blogspot.com/2008/03/windows-xp​-sp3-and-microsoft-hd-audio.html
    Moderator Note; converted to clickable link
    Message Edited by andyP on 04-21-2008 07:32 PM

  • How to install Audio drivers???

    KT3 ultra2 board (ms-6380e)  When trying to install the Audio drivers/Energize the On-Board Audio (MSI DVD 5.1ch) from the CD the pesky thing asks for a Serial #!?? What # do I put in ??
    Hope it's not on that sticky onna Back of the board.. where I have to take everything out of the case to access.:-(
    Any suggestions?

    serial # should be printed on the CD .....

Maybe you are looking for