MSI 880GM-E41

 
I need information about my mainboard i wont upgrade(bay) the procesor Phenom II X6 1055T L3 9mb 125w On msi site dont have that cpu on cpu suport so i want some information can i put that procesor. 
MSI 880GM-E41

I don't think it will support that one since it's not on the list. You can always check with MSI: >>How to contact MSI<<
You should be able to find the 95W version available to buy though, so that's the alternative.

Similar Messages

  • MSI 880GM-E41 problem

    Hello,
    I tried to turn on PC,but led of APS blinking and PC can't turn on.I tried everything remove all hardware except procesor,but it blinks.I can't recognize is this PSU or CPU problem?
    P.S sorry for my English.

    Quote from: Dexas on 24-June-13, 17:59:56
    Hello,
    I tried to turn on PC,but led of APS blinking and PC can't turn on.I tried everything remove all hardware except procesor,but it blinks.I can't recognize is this PSU or CPU problem?
    P.S sorry for my English.
    CPU: AMD Athlon X3 445
    MB: MSI 880GM - E41
    RAM : Kingston 2x2GB
    VGA: Intergrated
    HDD: Seagate ST3500418AS 500GB
    PSU: FSP 400W
    OC: no OC
    OS: Windows 8

  • Random Shut Down on a MSI 880GM-E41

    System under discussion
      AMD Athlon II x3  450 Regor  3.2 Ghz
      MSI 880GM-E41 mainboard
      Kingston DDR3 Hyperx/fb 2x2Gb
      Seagate Baracuda 160Gb IDE  HD
      Logisys 480w Power supply
      USB mouse
      corded keyboard
      using onboard video by ATI
            I used the search to find random reset posts but they all seemed to be 10 years old.. and none marked solved so here is a fresh question for old timers on the MSI board.
            This random shutdown (as described in those old posts) happens with no load on the system except for my always on net connection which does exchange some data.
            This MSI board was a (unknown to me at the time) discontinued item from New Egg.  It works ok most of the time so I was wondering if there is some software cycle that kicks in.  I have no screen savers on or anything else I know of.  A defrag monitor is loaded and I use the Comodo firewall system.  That's it-- nothing else to tell of interest.

    You already have a topic for your issue, no need for another (https://forum-en.msi.com/index.php?topic=160956.msg1179710#msg1179710) . Besides this board is not ten years old. "Similar issues" that old are irrelevant.
    -- TOPIC LOCKED --

  • Sound issue with my msi 880gm-e41 mainboard

    please help me to solve the problem as follows----------i have 5.1 speaker system and the sound is good at a medium sound range from my pc sound control,but when i increase the sound the song tends to stop and play randomly,i dont have such type of problem in my previous gigabyte mobo.and the most funny thing is if i unplug the red jack which is connected for middle and sub woofer sound the sound is ok for the remaining four speaker,please help me to solve the problem ,i have already checked many times as the via hd audio has been installed perfectly or not....................

    ok here are my PC configuration:
    amd phenomIx4-955 BE processor,
    msi 88o-gm-e41 mainboard.
    2x2gb 1333 bus team&e-lite ram,
    220 gt 1gb gpu,
    500 gb seagate harddisk,
    win7 64 bit ultimate os,
    logitech keyboard mouse
    delux-sh496 casing with psu
    viewsonic 17 inch lcd monitor
    via build in sound card,
    5.1 logitech soundbox

  • MSI 880GMS-E41 support UEFI?

    I was looking around on Newegg for a new motherboard with some type of rebate, and saw: http://www.newegg.com/Product/Product.aspx?Item=N82E16813130652&name=AMD-Motherboards
    Which looks pretty good. I happen to have a 3TB SATA drive though, and from my understanding; I can't use all 3TB of this HDD as one partition unless the partitioning scheme is GPT. And it turns out Windows will only boot from GPT drives if it was installed in UEFI mode.
    So, did that motherboard happen to support UEFI? Looking around the internet didn't exactly show that it did, but I'd rather be sure.

    from some searching it has a basic AMI BIOS not a UEFI! so it wont allow 3TB GPT partition boot!
    if your looking to do a single large drive look for a MSI board that has 3TB+ infinity on it as they are designed for that specifically!

  • 880GM-E41 and Server 2008 / Windows Home Server 2011

    I am building a WHS 2011 machine (which is based on Server 2008) and am considering the 880GM-E41 mainboard.  However when I go to the product website:
    http://www.msi.com/product/mb/880GM-E41.html
    I don't see drivers listed for Server 2008.  Specifically, there are chipset, audio, raid (etc) drivers listed for Windows 7 64-bit, but nothing for Windows Server 2008.  However in the past I have experienced mainboards which 'just work' regardless of the drivers that are downloadable.  My question is... before I purchase this mainboard, does anybody know if the motherboard works on Windows Server 2008?  Or which devices/features will not work?
    I actually don't require the RAID drivers to work since I won't be using hardware raid, but I will need the system, chipset, and audio drivers working (whether they get pulled from Windows Update or downloaded from MSI).
    Thanks!

    WHS 2011 is built on the Windows Server 2008 R2 code base, which is built on Windows NT 6.1, the same core operating system used with the end-user oriented Windows 7.  So basically, you need to use Windows 7 64bit drivers and everything will be fine.

  • 880GM-E41 And Amd Phenom 840

    I am thinking about ordering a http://www.msi.com/product/mb/880GM-E41.html and a AMD phenom II 840(HDX840WFGMBOX) but the 880GM-E41 does not list it under supported cpus but since the 840 a propus die would it work ? will msi release a bios update for proper ID

    I have the same CPU in my 890FX-GD70 board, and it works fine and is recognised correctly, despite also not being on the supported list for my board. Should also work in yours too.

  • Problem 880gm-e41 and corsair 1600

    Hi to everybody. I just bought a new 880gm-e41 and 6gb (3x2)gb, code name cmx6gx3m3a1600c9.
    The problem is that sometimes when i switch off the pc it does not starts again until i not remove a module of ram.
    I have made the last bios update and the problem still exists.
    The rams did not give me some error with testing softwares.
    What can i do more?
    Please help  :(
    Many regards

    See this FAQ: https://forum-en.msi.com/faq/article/amd64-and-memory-explained

  • Does 880GM-E41 support Wake-On-Lan?

    I've been through the manual at 880GM-E41:
    http://www.msi.com/product/mb/880GM-E41.html
    But it makes no mention of supporting Wake-On-Lan.  It shows a BIOS picture and support for all other type of wakes, but not Wake-On-Lan.  A search of the internet gives inconclusive evidence.
    Any feedback appreciated!
    Thanks!

    Modern mainboards do not have a specific 'Wake on LAN' option in the BIOS.
    Most recent MSI boards, including yours, use an integrated Realtek PCI-E network controller. So in BIOS, you need to enable 'Wake on PCI-E', and then configure the driver properties for the network controller in Windows.

  • MSI 880gm-e43 ddr3 1600 support

    I recently purchased this motherboard (msi 880gm-e43), and Kingston HyperX 4GB KHX1600C9AD3K2/4G ram kit. However while both are supposed to support DDR3 1600MHz, I only get 1333 with the default configuration.
    Do I need to change overclocking settings to get these working? If so how can I do that?
    (Btw, SPD shows up to 1333 only, while MSI's control panel applications also has another entry for XMP-1600, which I do not exactly know how it differs).

    I though I was able to do it. There was a simple option, which allowed 1600MHz with no issues.
    But it turns out that mode comes with increasing DRAM timers. Is there a way to increase the clock speed, while keeping the timers fixed?
    (I compared Windows Experience Index scores, it performs exactly the same in both those configurations).
    There is this page, but it has no documentation, and I have no idea how to set it up:

  • MSI 880GM-e35 Wakeing up from sleep by USB mouse or USB keyboard

    I have two 880gm-e35 boards that will not wake up from sleep by Keyboard or mouse. (S3) sleep condition.
    -They wake up by tapping the power button..ok.
    On the E-35 boards If I set the (S1) Sleep condition where the fans stay on and power light does not blink, they wake up by USB mouse.
    I have a 880gm-e43 that does wake up from (S3)  sleep by usb mouse or keyboard.
    They are configured about the same, the E43 has a couple more options in that area but basically the same.
    Is that normal, The Bios kind of implies that it should wake up from S3, but no luck.
    Not a big deal, but I would prefer the USB wakeup, if possible..!

    Thanks for the reply. On the right track, but could not find that option.
    maybe I will look to see if they have other bios options for that board.
    Thanks again...

  • MOVED: MSI 880gm-e43 ddr3 1600 support

    This topic has been moved to Overclockers & Modding Corner.
    https://forum-en.msi.com/index.php?topic=145131.0

    I though I was able to do it. There was a simple option, which allowed 1600MHz with no issues.
    But it turns out that mode comes with increasing DRAM timers. Is there a way to increase the clock speed, while keeping the timers fixed?
    (I compared Windows Experience Index scores, it performs exactly the same in both those configurations).
    There is this page, but it has no documentation, and I have no idea how to set it up:

  • MOVED: msi 880GM-E43 can't overclock my ram

    This topic has been moved to Overclockers & Modding Corner.
    https://forum-en.msi.com/index.php?topic=144700.0

    Got the same probs as you mate. Can't push my 3000+ much higher than 208mhz FSB either, it just resets and sometimes throw up errors when i try.
    My specs are as follows;
    AMD64 3000+ (Stock cooler)
    2x512 Geil Value pc3200 RAM
    K8N NEo Platinum
    2x 80gig Maxtor SATA (RAID 0)
    ATI 9800pro
    Temp was really high (idle 49, load 59!) when i first got it but after changing to the 1.4 bios i get idle 36, load 45 now.
    Strangely my system is not set at 200mhz FSB by default. When i try to go to default FSB or try 200Mhz FSB it sets to 201Mhz instead so my system is at 2010Mhz, I cant get 200Mhz bus! At this setting its really 'jumpy' when playing games i get little judders/pauses. When i overclock to 205mhz+ then it runs smooth as anything, it's really strange.
    Well i've tried AGP at 67 and 68 no luck, moved SATA over to the 3/4 Ports, relaxed memory timings, upped voltage on both ram and CPU, removed drives, etc no luck at all :(
    Temps are well within limits (Apart from this the system runs rock solid, primes at full load for 9+ hours overnight easy at 2080Mhz with temps reaching 49C, just absolutely no luck in overclocking any further.
    I've decided to use this setup for a HTPC instead and build another with a DFI board and hopefully fare better next time.
    H.Hoang

  • Msi 880GM-E43 can't overclock my ram

    My Computer Spec:
    880GM-E43 BIOS 2.11, Sempron 140/Sempron 145(Unlock)/Athlon X2 5200(Unlock), Windows 7 Home Premium 32 bit
    Super Talent WB160UB2G8 (Default: 1600MHz CL8-8-8-24-36 1T)*
    Corsair HX850W +12V~70A, +5V~25A, +3.3V~25A
    Galaxy GTS250 1GB
    WD Caviar Blue WD6400AAKS 640GB 16 MB cache SATA 2.0
    ASUS DVD/CD R-W
    * This ram cannot find on SuperTalent offical webpage.
    Bios show "cmos checksum bad" when I overclock my Ram(1600MHz CL8-8-8-24-36 1T change to 1600MHz CL7-8-8-24-36 1T or 1600MHz CL7-8-7-24-36 1T etc.)
    This ram maybe use ELPIDA BDBG ram chips(find from internet)

    Got the same probs as you mate. Can't push my 3000+ much higher than 208mhz FSB either, it just resets and sometimes throw up errors when i try.
    My specs are as follows;
    AMD64 3000+ (Stock cooler)
    2x512 Geil Value pc3200 RAM
    K8N NEo Platinum
    2x 80gig Maxtor SATA (RAID 0)
    ATI 9800pro
    Temp was really high (idle 49, load 59!) when i first got it but after changing to the 1.4 bios i get idle 36, load 45 now.
    Strangely my system is not set at 200mhz FSB by default. When i try to go to default FSB or try 200Mhz FSB it sets to 201Mhz instead so my system is at 2010Mhz, I cant get 200Mhz bus! At this setting its really 'jumpy' when playing games i get little judders/pauses. When i overclock to 205mhz+ then it runs smooth as anything, it's really strange.
    Well i've tried AGP at 67 and 68 no luck, moved SATA over to the 3/4 Ports, relaxed memory timings, upped voltage on both ram and CPU, removed drives, etc no luck at all :(
    Temps are well within limits (Apart from this the system runs rock solid, primes at full load for 9+ hours overnight easy at 2080Mhz with temps reaching 49C, just absolutely no luck in overclocking any further.
    I've decided to use this setup for a HTPC instead and build another with a DFI board and hopefully fare better next time.
    H.Hoang

  • 880GMS-E41 (FX) onboard video chip

    My motherboard died. So, I was looking at it, since it has the HDMI port, but for the life of, I cannot find out what video chip this motherboard comes with. Does anyone know?

    The AMD 880G Chipset with ATI Radeon™ HD 4250 Graphics

Maybe you are looking for

  • Weblogic Server abort suddenly

    Hi, We experienced spontaneous weblogic server abortions. The system configuration is as follows: Microsoft Windows Advanced Server 2000 Weblogic Server 8.1.0 (in production mode) SUN JDK 1.4.1_02 The symptom is that Weblogic server exits without pri

  • Help - updatd to 7.3 this morning and getting error

    i got the error that 'cannot run because it has detected a problem with your audio configuration' does anyone know what that means and how I fix. I can't get iTunes to open at all anymore.

  • SRM replenishment collaboration with Supplier consigment Material.

    Hi . Srm community. I have need to implement the funcionallity the supplier can see the stock of material in consigment. the srm standar have that functionallity or is neccesary make developments to meet .  thanks a lot .

  • Configuration validation resulted in error(s)

    Hi, I am facing a problem in configurator,we are using deferred booking workflow.When we are creating new orders with ATO/PTO items the standard BOOK Node in the workflow is getting completed with result Incomplete. The error message on sales order,

  • The question about "Merge"

    I created a Sequences (24fps),Captured video and imported audio files.After set inport,I used the command "merge".But that merged clip's inport presented offset--video's inport and audio's inport are not superposed. that's Why? waiting your answer. p