MSI K8T NEO-FIS2R Sound Problem

Why does the sound cut out after a period of about 5 hrs or more it completely stops in windows XP havent tryed any other OS,  i keep having to restart the computer to bring the sound back!
Any help on this would be greatly Appreciated

Quote
Originally posted by joshr45
Why does the sound cut out after a period of about 5 hrs or more it completely stops in windows XP havent tryed any other OS,  i keep having to restart the computer to bring the sound back!
Any help on this would be greatly Appreciated
Do you have LiveUpdate installed (or whatever it is called)? When I was using the onboard sound (moved to an Audigy2 ZS) the sound would go once Live Update had searched the web for available BIOS/Driver updates.  I only had mine set weekly but sods law meant that I ended up with no sound for a Rugby World cup I had recorded on my AIW pro (aaaarrgghh). It would only come back with a reboot.
Alex

Similar Messages

  • MSI K8T NEO-FIS2R: RAM problems

    I have the motherboard K8T NEO-FIS2R with AMIBIOS 2VMS V2.0 010505.
    I tried these DDR-RAM:
    DDR-RAM 512MB PC400 CL3 Kingston KVR400X64C3A/512
    DDR-RAM 512MB PC400 CL3 Samsung
    but the motherboard recognizes only 256 MB for both. The RAM are good: I tried them in an other pc!
    Now I have installed an A-DATA ram 256 MB and the motherboard recognizes 256 MB!
    Do you think that my motherboard is defective?
    Thank you in advance.
    P.S. I'm sorry for my bad english.
     

    No the memory controller is onboard the CPU so in any case the MB is not defective. However the CPU revision may hold you back on some RAM especially if you mix make and model RAM on the same channel. A socket 754 CPU only has one channel so all RAM must be matched to work properly.
    If those Sticks can only be seen as a wrong value when used by themselves it is likely that either they have errors or the timings in Bios are improperly set to azllow them to work. In this case you can normally find out what is going on by running memtest86. If you get errors on test 5 or 7 then you have timgs timed improperly and any other errors would show bad RAM.
    Another case is not having enough power for everything to work properly together. Usually this happens when you don't have enough 12v amps for these newer rigs.
    Post complete specs and test results and maybe we can help you further.

  • MSI K8T Neo FIS2R - Memory problem???

    I have bought myself a second stick of ram for my computer, being careful to make sure it was exactly the same brand and model.
    In spite of this I now get random bluescreen errors of varying types, the first was PFN_LIST_CORRUPT and the latest:
    PAGE_FAULT_IN_NON_PAGED_AREA
    STOP: 0x00000050 (0xC5AD0D7C, 0x0000000, 0x8050298A, 0x0000000)
    Is the new ram incompatible?? this makes no sense though.....   ???

    I have tried switching ram sticks around but no luck there
    Got three BSOD's yesterday, no specific error just STOP: blah blah blah when trying to burn a CD and then after that just when using IE.....
    ........and then I played call of duty 2 for 3hours without a single problem 
    Today when trying to run FS2 open I got two IRQL_NOT_LESS_OR_EQUAL errors (with no driver mentioned)
    Anyway, I have been doing some research on socket 754 athlon 64's, and I found some interesting info from AMD:
    Where MSI says that the board supports that config at DDR400. so the board supports it but the CPU doesn't! what is the point of that??
    I tried running at DDR333 but the CPU stuck at 1.8GHZ (150FSBx12) according to everest 
    Is it possible at all to run two sticks of Double sided ram at DDR400? surely someone has done it and has it working....
    Another thing, after the first IRQL error my computer hung at detecting the CD-RW drive and I had to turn off and on again  ???

  • Msi k8t neo fis2r problems part 3

    sometimes when the computer is turned on it just turns the fans and leds on but doesnt boot up...
    most of the time it loads up and i boot to the windows xp cd and i install the drivers for sata and then when it reaches the point of copying the files it will give me a bsod and say that there is a problem with the irql driver and then force me to shut the pc down..
    sometimes it makes it past that and will begin to copy files onto the hard drive, like somehow the data is becoming corrupted..however it will start to say that the files cant copy randomly and it will allow me to retry..they will copy the 2nd time usually..i can keep hitting retry and it will usually go by..it gets to 30 something % and then crashes to bsod just giving me some random error..for some reason the files keep screwing up that go on the sata drive....I just replaced the old power supply that wasnt working with an antec true watt 430 watt power supply, so i know it isnt that..
    i just cant figure out what the heck is going on..any help would be appreciated.my specs are
    "IRQ NOT EQUAL OR LESS"
    athlon 64 3000+ cpu
    msi k8t neo fis2r motherboard
    mushkin special cas 2.0 2-2-2-5 512 mb pc 3200
    western digital 8mb cache 80 gb sata hard drive
    sapphire radeon 9800 pro 128 mb 8x agp

    fyi look an your cd sticker ity will show power, consumption, but they are way lower than you would think, hard drives,can be only 10 watts, less then some case lights , and fans, cd are  similar.. your video, is the biggy somewhere between 90~150 watts..yikes .next to the cpu..and the mobo can use 50 or so (not sure about new mobos)  not to mention the ram 1024 is @40 watts or so., dont forget about 25watts per pci card, not counting the sound card which can be double....
    ergo the need for a big psu..
    the combined total ratting on a psu is not the max number that the psu is rated, that is surge value.. so a 500 may only hold 400 sustained , and that will drop as the machine heats up, so in the end your 500 may onlyy pull 366 @50'c...

  • Problems with OC in MSI K8T Neo FIS2R!!!

    Hi!
    I have faced problems when making OC in my Athlon 64 3400+. I do not obtain to increase the FSB for 213Mhz more than without that they occur stopped or reset. I am using 1Gb (2x512) of Ram (Corsair CMX 3200LL PRO).
    In the internet many stories exist that chip VIA K8T800 is not good for OC, because the AGP/PCI cannot be stopped with fixed values.
    Exists some form to obtain with stability in this Mobo one overclock descent, with FSB of at least 220Mhz? The lack of stability in overclock limits the processor very, what it finishes in forcing to who knows to abandon the K8T Neo, passing to a Mobo that uses Nforce3 250, for example.
    If somebody will be able to help with tips to try one overclock for FSB in 220mhz with stability would be very grateful, friends!
    my system
    Athlon 64 3400+ (cooler venus 12)
    MSI K8T Neo FIS2R
    1Gb Ram (512x2) Corsair CMX 3200LL PRO
    ATI Radeon 9800XT 256Mb
    120Gb SATA Maxtor 8mb buffer
    Audigy 2
    420W Thermaltalke
    Case Lanfire Thermaltalke
    Monitor LG Flatron 17 700P
    CD/RW+DVD
    LAN (adsl 400k) + Fax Moden (56k)

    Take your sata drive off and you can overclock higher. There is no PCI/AGP lock so the speeds are affecting your sata drive. 210 mhz. system clock is about the limit before the sata drives start to act up.
    The problem is with that particular VIA chipset. No way around it has been found to work in a practical manner.

  • MSI K8T Neo-FIS2R - Which slot sound card?.

    Hi all,
    I have a MSI K8T Neo-FIS2R and was wondering which slot to put my sound card in?.
    At the mo it's in pci slot 4 i only have 3/4and 5 availible becuase of my arctic cooler on my rad 9800 pro.
    The sound card is on IRQ 19 sharing with the IEE1394 host controller, i dont use firewire so could i disable it in the bios?.
    Cheers all.

    Hi
    Should not make any differance, don't worry about the IRQ, let the comp sort it out, it knows whats where, better than humans do.
    Any probs, disable the onboard sound. maybe change PCI slot, but there should not be.
    cheers
    jocko

  • Msi k8t neo fis2r xp install problem

    I tried to install xp on my sata drive..i downloaded the raid drivers and put them on a floppy, it accepts the raid drivers (im not trying to use raid, just regular sata), and i select the hard drive and attempt to install to it, but the files from my xp cd keep saying something about invalid image has been installed to your hard disk (or a similar message to that)
    also part of the time the comp will not boot properly, it will just beep on and hang and nothing will show to the monitor, or if i have a disc in my cdrom when i try to turn it on it wont turn on, but then when i take out the disc and reboot the comp it turns on again..no clue what might be going on..
    my specs are
    a64 3000+
    512 mushkin special 2-2-2-5 cas 2.0 ram
    80gb WD SATA 8mb cache HD
    radeon 9800 pro (sapphire)
    MSI K8T NEO FIS2R
    sparkle 400 watt power supply

    You better get something like an Enermax 465 for your rigg, as yours:
    Quote
    Output: [email protected]/28A,+5V@40/28.5A,[email protected],+12V@15A,[email protected],+5VSB@2A
    Could blow to pieces any minute now....
    15A @ 12V is way too light.....
    The Enermax has 33 of them

  • Problem with MSI K8T NEO-FIS2R

    When I boot my computer I get a message invalid boot.ini then it says c:\windows and windows starts normaly. What I don't understand is why do I get invalid boot.ini Anyone knos how to fix this?

    I'm sorry for no specs. Here you go
    MSI K8T NEO-FIS2R
    AMD 64 3000+
    2X 512MB 400MHz Ceon CL=2,5
    HDD 120GB WD
    HDD 4GB SEAGATE
    CDR DVD-RW NEC ND3520
    CDR SONY
    400W POWER SUPLY
    primary master CDR DVD-RW
    primary slave NONE
    secondary master CDR SONY
    secondary slave HDD 4GB
    and last HDD 120GB on primary raid
    NONE on secondary
    I have ORIGINAL windows xp with sp2 on 120GB HDD. I bought this computer and they put windows xp on my system.

  • Calling all old MSI K8T Neo-FIS2R users

    Ops i posted this in the wrong forum first time, this is the right place
    This for all MSI K8T Neo-FIS2R users, that have changed to the new MSI K8N Platinum nForce3 250 mobo, if I have the chance to swap to the new board should I do so, or does this mobo have its fair share of problems?
    Is the MSI K8N Platinum nForce3 250, a better board compared to the old MSI K8T Neo-FIS2R? Not taking into account overclocking.
    Like is the onboard sound the same or worse or better in your opinion? Is it any faster at stock? Are there any other advantages?
    Thx Xe

    I had a K8T Neo Fis2r at first.  I got a K8N Neo because I believed my Blue Screens were a faulty K8T Neo.  As it turned out, the Audigy2 I had in there was the problem, because I still got Blue Screens with the K8N Neo, and when I took out the audigy and used onboard my system ran stable.
    I havent had any of the apparent keyboard controller problems, or ANY other problems with the K8N.  My only instabilities have been the Audigy2's fault.
    Havent tried overclocking on the K8N Neo yet, maybe a little down the road.  As far as features go, the K8N has the hardware firewall on it (which I dont use) but apparently its "true" gigabit ethernet is better than the K8Ts.  Dont ask me to clarify that, lol
    btw Got my turtle beach Santa Cruz today and put it in my K8N Neo, crossing my fingers... =\

  • Will Gainward 6800GT fit my MSI K8T NEO FIS2R?

    Horror picture on a ABIT NF7-S
    I saw this picture and saw that the card i extremely long!
    Anyone here on the forum that can guarantee that my Gainward 6800GT card (with a red gainward cooler) will fit on my MSI K8T NEO FIS2R?
    MSI K8T NEO FIS2R
    Please?  

    I think I have found out the problem  
    Using my old Enermax (350) I was able to boot up the AMD 64 2800 every time but the PSU made this weird electrical sound - I think because it was being overloaded (I think as it doesn't make this sound when used with my XP 1800). I then reverted back to my new X-Pro (460w) and after a few attempts I managed to get the ram module and CPU powered... slowly adding more fans it became harder to boot and eventually the GPU fan wouldn't run once I plugged another fan in... I'm guessing this is because my PSU is too weak to power the juice guzzling AMD  
    I'll need to break the bank once again I suppose  

  • MSI K8T Neo-FIS2R won't power-up

    My MSI K8T Neo-FIS2R won't power up when I switch it on. All that happens is the fans "jolt" a few millimeters and that's it  
    Using an X-Pro 460w which does work as I have tested it on this PC  
    Any help would be greatly appreciated  

    I think I have found out the problem  
    Using my old Enermax (350) I was able to boot up the AMD 64 2800 every time but the PSU made this weird electrical sound - I think because it was being overloaded (I think as it doesn't make this sound when used with my XP 1800). I then reverted back to my new X-Pro (460w) and after a few attempts I managed to get the ram module and CPU powered... slowly adding more fans it became harder to boot and eventually the GPU fan wouldn't run once I plugged another fan in... I'm guessing this is because my PSU is too weak to power the juice guzzling AMD  
    I'll need to break the bank once again I suppose  

  • MSI K8T Neo-FIS2R - help please :(

    When i first got this board + my Athlon 64bit 3200+ I just left everything in bios at default, and counter-strike bullet registration was amazing, the FSB clock said 133, (no i did not imagine this as ive had two of these boards and they both said 133fsb when i went to bios).... one day my p.c wouldnt boot up, i did a series of tests and couldnt find what was wrong, i eventaully reset cmos and still it would not boot up properly. So i got a new harddrive and that seemed to solve the problem, only this time when i went to bios instead of the FSB saying 100-280, it said 190-280, now counter-strike bullet reg has totally gone and plays like , oh sure good frames per second but it doesnt feel instant, i want 133fsb back quite desperately, i was hoping one of you kind people could tell me if theres fsb jumpers on my board or how i can get 133fsb back, wont let me below 190 at the moment :(
    Thanks

    below are my specs,similar to yours.  the issue is in the audigy card .. remove it , try a different card ( live ) if some one can resolve this please let me know too..
     I have a problem ,when ever I boot my system hangs ( at sound card) ,if I power down and reboot a few seconds later its fine.if I leave it running its fine,only on a cold start. if I remove my audigy card this problem goes away, I can use other cards ,but not the audigy, did you ever have this issue ,or know any one who has had an irq issue like this( I think its in the irq) ...............
    My system- Athlon 64 3400+ bios 1.4| MSI K8T NEO-FIS2R | Kingston HyperX 1GB(pc3200)@2-2-2-5 | Nvidia g3 ti500 | Maxtor 160gb  SATA 160gb | Creative Audigy  | Plextor 52x24x52x CDRW | | Windows XP Pro Retail | Thermaltake 3000A Case & 480w PS | NEC FE1250+ Monitor

  • MSI K8T NEO FIS2R No VGA help plz!

    Hi, ive just purchased a new athlon 3000 64 cpu retail and an msi k8t neo fis2r motherboard, the specs and problem are below but plz bare in mind i am a system builder for the last 3 years i have tried alot of things to solve this.
    MSI K8T NEO FIS2R MOBO
    AMD 3000 64 RETAIL CPU
    AMD RETAIL HSF
    1024MB DDR333 SAMSUNG RAM
    120 GIG WD HD
    GALAXY GLACIER GEFORCE 6800 GT 256MB
    PIONEER 106 DVD WRITER
    400 WATT PSU (TSUNAMI I THINK)
    Anyway the problem is this when i put the system together and turned it on i dont get any vga the monitor just says NO SIGNAL and when i look at the graphics card the fan on it isnt spinning.
    Yet i have my old setup which is as follows,
    ASUS A7N8X DELUXE MOBO
    AMD 3200XP BARTON
    AMD HSF
    1024MB DDR333 AMSUNG
    120 GIG WD HD
    GALAXY GLACIER GEFORCE 6800 GT 256MB
    PIONEER 106 DVD WRITER
    400 WATT PSU
    Basically the same as above i just changed the cou and mobo now when the graphics card is in that system it works fine no problems as soon as i try it in the new a64 system it doesnt work the fan doesnt spin and nothing comes on screen, ive tried everything i know ive double and trebble checked connections and ive tried removing components and then trying it, no matter what the graphics wont work.
    I figured the motherbaord must be faulty and am going to contact the place i got it from but it would be good if anyone here knows how to solve it if it isnt the motherboards fault.
    thanks very much.
    ic3man1999.

    Thanks guys, huess what like an idiot i forgot to put the 4 pin 12v in :( doh
    Anyway it works fine now, but i have high temps core centre says 56 degrees right now while im typing this ? is this accurate or am i in trouble ?
    Oh yeah and everytime i load windows it says new hardware found ide channel then secondary ide channel then it says a problem occured during your new hardware installation and it calls the hardware HDC it says this twice aswell.
    ANy help guys ?
    thanks

  • MSI K8T Neo-FIS2R VIA K8T800 Issues

    I am thining of switching from a P4 system to a athlon 64 system. Only I have a few problems.
    Will I be able to use an amd athlon 64 3000+ on the MSI K8T Neo-FIS2R VIA K8T800 motherboard??
    and also will I be able to use my OCZ 1GB (512x2) DDR533Mhz PC 4200 RAM (DUAL CHANNEL) on the motherboard as well?

    Hi
    I use Elixir from Ebuyers, thats the cheapest I could find, works flawlessly on the AMD 64 3200+, the label says
    ' M2U51264D88HB3G-5T
    512MB DDR 400MHz- CL3
    PC3200U-30330
    The sticks were taken from a KT4 Ultra, where they also worked faultlessly.
    Hope it helps

  • MSI K8T Neo-FIS2R - Suggestions

    Hi,
    I have just ordered these parts:
    AMD Athlon 64 3200 (Socket 754) - Retail (CP-060-AM)
    Asus DVD-E616P1 16X DVD-ROM / 48X CD-ROM - Retail (CD-002-AS)
    Western Digital Caviar 120GB Special Edition 8MB Cache Serial ATA - OEM (HD-009-WD)
    Antec Sonata Piano Black Quiet Case - 380W TruePower Silent PSU (CA-003-AT)
    MSI K8T Neo-FIS2R (Socket 754) Motherboard (MB-010-MS)
    Sapphire Radeon 9800Pro
    I am still stuck on RAM, despite searching other topics. Which PC3200 RAM actually works to the speed that it should, I'm not convinced by the MSI list.
    Will Kingston HyperX PC3200 work to its full standard? I was initially looking at KingMax PC3500 RAM which is a lot cheaper, however it seems pointless to spend so much on quality parts and then get cheap RAM(although PC3500 should be faster, I assume it shouldn't make any difference if I'm not overclocking). I don't think I can quite afford Mushkin RAM, as I have about £220 for 1GB.
    Secondly, with my PSU be able to power the system without overclocking?
    Thanks for any ideas.

    I would also suggest a better PSU, I had a Enermax 350W before and it only just coped + a high pitched whining sound  
    Plus a Pentium 4 and an AMD64 = not equivalent in terms of power consumption. If you already have that PSU, then fair enough try it. But if your still planning to buy it... I would go for a better one. Just my 2 cents  

Maybe you are looking for