MSI R5750 Will not display during boot, crashes on update

Hello,
I recently upgraded my PSU and VGA for my computer and am using a generic LCD monitor (hp L1925).  When I installed the VGA, it will not send any video output unless the monitor is first plugged into the motherboard's video.  When I plug the monitor into the VGA, everything runs fine, the VGA works well.  However, when I try to either install or uninstall drivers, part of the monitor turns black and then loses picture.  Live Update has my system at the latest version of BIOS for both the motherboard and VGA.  Any ideas?     

I swapped out the video cable between the monitor and the vga, now everything is working very well.  Thanks.

Similar Messages

  • 2006 Mac Pro + NEC 3090 - grey screen not displayed during boot

    I have a September '06 Mac Pro 1,1 (Woodcrest variant) hooked up to an NEC 3090 30" LCD monitor, running OS X 10.5.7. Previously, I was using an Eizo S2110W 21" LCD; turning the monitor and computer on would cause the following to be displayed (in order):
    1. Light grey background with dark grey Apple logo with spinning thing.
    2. Solid blue background.
    3. Leopard wallpaper.
    4. Log-in dialogue.
    Since using the NEC, the grey screen is not displayed at all: the display stays blank until the blue screen is displayed, and then the Leopard wallpaper and so on. This is using the 2560x1600 native resolution of the display, and has occurred using both 10.5.6 and 10.5.7.
    If I change the resolution to 1280x960 and boot, the grey screen is displayed. If I change it to 1600x1200, I get weird corruption on-screen during the period when the grey screen should be displayed; for some reason, this includes part of the desktop wallpaper I was using before I rebooted.
    Resetting the non-volatile RAM using Command-Option-P-R works for the very first time I boot the computer, though the grey screen is displayed at very low resolution. If I reboot from the log-in dialogue immediately afterwards, normal behaviour occurs - i.e. the blank screen.
    The upshot of all of the above is that if I want to boot into Windows, or install OS X (e.g. when Snow Leopard comes out), I have to remember to boot into my existing OS X installation, change resolution, reboot whilst remembering also to hold down the ALT/Option key. It would be much easier if I could do away with having to change resolution.
    I have tried connecting the monitor to a PPC Mac mini at 1600x1200 (it won't go any higher), using Tiger 10.4.11 (not sure of exact version - the latest). At this resolution, the grey screen is displayed.
    Using a '08 MacBook Air (first generation) and the supplied DVI adapter, also at 1600x1200, nothing is displayed on the NEC until I get to the log-in screen. This occurs if the NEC is set to be the primary display or the secondary one - the only difference is where the log-in dialogue is displayed. I am not familiar with dual-screen behaviour, so I can't say whether anything is supposed to be displayed or not (i.e. does the grey appear on both displays?).
    I have been in touch with NEC Europe support on this issue, who suggested it might have something to do with the 10.5.7 release. I know this not to be the case, as it was occurring prior to 10.5.7 being released.
    Any ideas?

    Put more of your hardware listed in your profile.
    I looked and don't see you list your graphics card anywhere.
    Graphic card it came with was either X1900 (watch for heat and dust bunnies and clogged vent);
    OEM 7300GT (seems unlikely).
    You could have replaced either with 8800GT or ATI 3870.
    Require 10.5.2+ ideally 10.5.6+.
    Some problems cropped up with 10.5.7. 10.5.7 doesn't work on some (many) 3rd party displays and stay with 10.5.6 if necessary until it is fixed or resolved.
    But you say it happens with 10.5.6 also, and was doing so before 10.5.7? which makes your problem somewhat different or unique.
    Zapping PRAM or NVRAM reset obviously shouldn't be needed repeatedly. And your graphics card probably needs to be replaced, or test with another card to rule it out.

  • Macbook Pro will not boot on external Firewire drive. Mybook with 2 partitions containing 2 OSX images using CCC. Volumes will not display when booting but do display when the internal drive is running OSX using Startup utility.

    I've reset SMC and PRAM several times. Activiatng Terminal from Recovery HD displays the following:
    -bash-3.2# diskutil list
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *250.1 GB   disk0
       1:                        EFI                         209.7 MB   disk0s1
       2:                  Apple_HFS Macintosh HD            249.2 GB   disk0s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
    /dev/disk1
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:     Apple_partition_scheme                        *1.3 GB     disk1
       1:        Apple_partition_map                         30.7 KB    disk1s1
       2:                  Apple_HFS Mac OS X Base System    1.3 GB     disk1s2
    /dev/disk2
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *2.0 TB     disk2
       1:                        EFI                         209.7 MB   disk2s1
       2:                  Apple_HFS MyBook1                 999.8 GB   disk2s2
       3:                  Apple_HFS MyBook2                 767.2 GB   disk2s3
    Any comments are greatly appreciated.

    Applejack is just a command-line "front-end" for a number of different command-line tools you can use in single-user mode, and I'm not sure whether it's Lion-compatible.  You can always try booting into single-user mode and executing:
    /sbin/fsck -fy
    That's unlikely to solve your problems, though.  Since you can't boot from two different hard drives and your optical drive, that indicates there's a more serious hardware issue, or multiple hardware issues.

  • IPod Will Not Display In My Compuater unless updating and album art.

    Okay, when I plug my Ipod into my computer now it doesnt seem to immediatly recognise it. It takes a few minutes. When it does finally catch my IPod is not adding with any of my new songs the album art with it. It was also saying that ITunes Artwork file temp 2 was corrupt or something. I just want to get this problem solved before my 3 months are up cause its coming in two weeks.

    Have you Restored it?
    just want to get this problem solved before my 3 months are up cause its coming in two weeks.
    The iPod comes with a one year warranty.
    You get one telephone support issue in the 90 days (meaning you ca call that one issue within the 90 days) and get it solved.
    You have one year in which to have it repaired/replaced under waranty.
    You can post here forever.

  • Firefox will not display certain features of websites in windows 8.1

    I've upgraded to windows 8.1. Installed Firefox (now ver. 26) right away. I go to the same websites to pay bills, do work stuff etc for the past few years.
    Those websites work fine most of the time. RANDOMLY (at least to me) 2 websites have been giving me trouble for certain features:
    1. Banking website will not display my online bill pay. It does not crash, it just says "unable to display page" and for me to check my firewall etc, reload page, etc. When I go to other features for my bank, it works fine except for the bill pay.
    2. My work website has a feature to display paychecks etc. It give me the same message of "unable to display".
    Here's the weird thing: I open and close firefox a few times and the page "magically" works.
    I load the same page in IE 11 and I have the same problem.
    I load the same page in chrome 32.0.1700.107m and I never have this problem.
    I load the same pages in firefox ver. 26 on a windows 7 machine and it work just fine.
    I'm at a loss since Firefox is my primary browser and only have the other browsers for the occasional incompatibilities.
    Any ideas? I've concluded that it's a windows 8.1 issue/compatibility but would like to try other solutions before I downgrade back to windows 7.
    FYI: I've turned off windows firewall and the same issue still occurs. I've updated to the latest adobe flash, shockwave, and Java. I only have one extension installed - adblocker (which is disabled for these websites).
    Thanks in advance for any help.

    Current Firefox versions have enabled a built-in PDF Viewer that doesn't have all features that other PDF readers like the Adobe Reader have or may not function properly otherwise.
    You can change the action for Portable Document Format (PDF) from Preview in Firefox to use another application like the Adobe Reader or set to Always Ask in "Firefox > Options/Preferences > Applications".
    You can set the pdfjs.disabled pref to true on the <b>about:config</b> page to disable the build-in PDF viewer.
    You can check the value of the plugin.disable_full_page_plugin_for_types pref on the about:config page and remove the application/pdf part if present or reset the pref to the default via the right-click context menu if you want to display PDF documents in Firefox with another application (i.e. not the built-in PDF Viewer).
    See also:
    *https://support.mozilla.org/kb/view-pdf-files-firefox-without-downloading-them

  • Firefox will not display characters that were added by the webmaster on user PC?

    I employed a company to design a site for me which is great. Then I asked them to add a small button/image in the back end (admin area) that when clicked on will send an email. No image will display so I got them to change it to Text format, still it is not showing on my end. The design company are able to send me emails showing where it is but I cannot see it. It is worthwhile mentioning that it will not display in either IE8 or Opera, Is it a firewall problem ? Or a setting on Windows 7?
    == This happened ==
    Every time Firefox opened
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; GTB6.4; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; eSobiSubscriber 2.0.4.16; OfficeLiveConnector.1.3; OfficeLivePatch.0.0; AskTB5.6)

    Can you post a link?
    Did you try to bypass or clear the cache?
    Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
    You can reload the page and bypass the cache with:
    * Press and hold Shift and left-click the Reload button.
    * Press Ctrl + F5 or press Shift + Ctrl + R (Windows,Linux)
    * Press Shift + Cmd + R (MAC)
    See [[Keyboard shortcuts]] and [[Mouse shortcuts]]

  • Z97 PC MATE - Second GPU will not display / black screen

    Using Z97 PC MATE with 2 nvidia cards (GeForce GTX970 and GeForce GETX750ti). My goal is to use the 750ti for dual display with the 970 reserved for compute in a 3D software package (houdini simulations). If both cards are installed on the mobo and one monitor is plugged into the 750ti, it will not display, not even the BIOS screen. Also there is no audio, there is normally a chime when the OS lock screen is reached and that never plays.
    The 750ti is plugged into the PCEe 2.0 slot, the 970 the 3.0 slot. Both cards can display in their respective buses by themselves if only one card is installed. If both are installed, the 970 will output a display as expected.  I have also tried an older quadro card in the 2.0 slot and it also defaulted to the 970 in the 3.0 slot. With one display plugged into the 970, and one in the 750ti I have gotten an image to display on the 750ti. But never with only one monitor plugged into the 750 attempting to use that card as the main display.
    I have used m flash to update the bios to 4.6, but I never used the disc which came with the mobo to update. I thought maybe there is a GPU display priority in the BIOS but I'm not seeing it. I see there is a way to prioritize UEFI and legacy, and Gen1, 2 or 3, but don't know how that should be set up for this (if that is the problem). I would think if that were the case though the audio at the lock screen would still play, but I don't know.
    My current nvidia driver version is 342.22, I am using Ubuntu 14.04 as linux OS operates better with the software I am using. I have also posted to the Ubuntu forums about this, but thought I would post here because the BIOS screen doesn't display which makes me think it could be hardware related. Although all of the hardware is detected properly and appears to be functioning as expected.
    This issue was reproduced with and without the HDD connected. 
    Hardware:
    i7 4790k
    EVGA GTX970 and EVGA GTX750ti
    Z97 PC MATE
    32gb PNY DDR3-1866 240-pin DIMM
    Antec Truepower Classic 750w gold certified
    PNY Optima 480gb SSD  - PNY SSD7SC480GOPT-RB
    Hitachi 2TB ultrastar HDD
    I am not sure at this point how to continue troubleshooting this issue, or if this is not possible for this mobo and I just didn't recognize that. One test I was considering is putting the 970 in my old computer (MSI 970FX-GD70) and seeing if the results are the same. Will post any additional required information.
    thanks! 

    Did you install your graphic driver when both vgas are on? Let the driver detect both vga then you can just switch cable and display well. Use the latest 344.65 driver. As for the 3D package, you need to make sure the software support or can change the settings that which vga to compute.
    But there's one thing I need to make sure first, does your vga work with only one vga on pcie 2.0 slot? Just wanna be sure it's not faulty slot...

  • Mail will not display, screen returns to home screen when I try.

    MMail will not display or load up.  When I enter the mail icon it instantly returns to the home screen.  Therefor mail will not display or show.

    The Mail App is crashing on you. You might have a corrupt email, a spam email or an email with a very large attachment that is causing the crash. It could also be a corrupt setting. It's difficult to know that it could be. If you have a computer, log into your email account in a web browser and look for any problematic emails and try deleting them there.
    Try closing the mail app completely on the iPad, reset the device and then try mail again.
    In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • My Databases Panel will not display my Databases?

    The issue "This server behavior requires a Cold Fusion Data
    Source" happens to me periodically when DW crashes after a week or
    two of non-stop use and all of my Databases "disappear" under the
    Database Panel? DW thinks that I have no Databases setup under
    Administrator? This is driving me crazy.
    I can open another Site and it's database's appear in the DW
    panel fine, but the Site I was under when DW crashed will not
    display in the Database Panel even though all of the webpages that
    access those databases work fine so I know it's not a CF server
    issue?
    I have tried the Site/Advanced/Remove Connection Scripts but
    that does not work.
    Sometimes if I rebuild the Site under Manage Sites, they will
    show back up? Other times I have reinstalled but that is not an
    option this time.
    This issue seems to be related to a DW & CF connection
    only? Any ideas or solutions?
    ps: Ben Forta, I remember your comment in the CFWACK chapter
    about DW's refusal to display the Databases unless a proper page is
    open in DW. While all of my pages are definitely .CFM with Datasets
    & querys, this looks like it's related to DW.
    Thanks,
    jlig

    Once again, I opened up DW, created & saved a new .CFM
    page, clicked on Insert/Data Objects/Recordset and DW pops up a box
    saying:
    Before inserting this object, please do the following:
    1. Create a site for this file. (checked)
    2) Choose a document type. (checked)
    3) Ste up the site's testing server. (checked)
    4) Specify the RDS login info on CF server. (checked)
    5) Create a CF data source.
    6) Create a Recordset.
    Obviously, I have already set up a CF data source, and can
    verify them in the CF Admin page.
    What causes DW to "lose access" to my Data sources?
    I would appreciate any suggestions and help.
    Thanks,
    cw

  • I have placed a photoshop file within a new picture and it will not display

    i have placed a psd file within a new psd file and it will not display.  It flashed on the screen for a moment and then disappeared, and no matter how many times I try, it will not show

    I started a new file, placed the image and the screen went into a bizarre pattern. I ended up closing the program and starting fresh and it worked properly.  Something went wonky during the session I guess.

  • Computer will not display picture

    The computer fan begins and power button lights up for a few second the fans continually run when starting the computer, but an image or error will not display on the monitor. The monitor does work I tried a different computer and it worked. The model of my computer is an Pavilon Media Center PC m8100n. What should I do.

    Hello Hatchlovesbees,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that your HP Pavilon Media Center PC m8100n will boot up, but is neither displaying an image or any errors on the screen.  I would be happy to assist you, but first I would encourage you to post which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this we can provide you with accurate information.
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Flash appears to install on Win 7, IE 8but will not display

    32 bit Windows 7
    IE 8, 32 bit
    FP 10.2.152.32
    FP S/W installation windows indicate that FP installed (Download Manager also says so)
    FP & Download Manager are both shown in Programs.
    History: Few weeks ago system was severely corrupted even though had McAfee Viruscan and Webroot Spysweeper. It was indicated every time an attempt to look at a video was made wherepon the computer would shutdown a few seconds afterwards. Working w/ Dell Support they determined the system was too far corrupted to save (7000+ files corrupted!!). They suggested that it would be preferable to install W 7 to replace then current XP operating system. Had disk formatted and XP operating system re-installed but only sufficient to  allow operation of email. When Windows 7 arrived fully installed along w/ new Word/Excel 2010 S/W. Retrieved backuped files successfully. Everything is operating OK except for FP. Every attempt to load (after repeated uninstalls) shows it to be "successful" but still won't allow videos to play.
    Based on perusal of thread, opened register to check on "kill-bit", found no indication it was set.
    What should I do next?

    From: eidnolb <[email protected]>
    Subject: Flash Player Flash appears to install on Win 7, IE 8but will not display
    Date: Friday, March 11, 2011, 7:32 PM
    Hi, what a terrible experience to have to go thru! I hope you don't still have either one of those "Anti-Virus" programs on your system. If not, what Anti-Virus/Spyware program(s) do you have?
    Yes it was terrible, but Dell (Solution Station, paid support) made this sickening experience bearable. Right now I have McAfee Total Protection 2011 for what it's worth (ya gotta have something) and I use Malwarebytes Anti-Malware (free version) twice a day to scan. The only thing it finds repeatedly is something in the registry defined as : HKEY_CLASSES_ROOT\regfile\shell\open\command\...
    So I can understand this, you now have Win7 on the computer? The backup files are from the XP that had the 7000 corrupted files?? When you reformatted XP, weren't those files lost? I guess what I need to know is how did those files get Installed onto the Win7 OS?
    Here's the sequence of events: I back up periodically with a WD My Book Essentials external drive, assuring that the system is as clean as I can get it and otherwise operating normally. I don't do it continuously for fear that I could be backing up corrupted files right up to the point the disk crashes The back up that was used was about six weeks old. The 7000+ corrupted files were cleaned before reformatting but would have been lost regardless when the disk was reformatted. After it was reformatted and before installation of W7, the  Dell reinstallation disk for XP was used. No backup files were loaded on this temporary XP system. When the W7 system was installed these backup files from the external drive were cleaned with Malwarebyes which found about 20 corrupted files. Since then only two have regularly appeared , they are in the registry defined as: HKEY_CLASSES_ROOT\regfile\shell\open\command\def...
    Also why wasn't the malware cleaned before reformatting?
    As indicated above, it was cleaned but never used again since it was all lost with the reformatting. The reinstalled software came from a six week old backup which has worked well and shows none of the malware, except for the few Malwarebytes intially found.
    One other thing, I revisited the "kill-bit" procedure. While I didn't find what you indicated, I did find these two entries with HKEY_LOCAL_MACHINE\SOFTWARE\ :
          Name                        Type                    Data
    "icon w/ab in it"             REG SZ            (value not set)
    "icon w/ab in it"             REG SZ            application/x-shockwave-flash
    Also, I was looking at your procedure in post #26, in response to jfirko where a vs 9 of FP is installed/uninstalled followed by the current version of FP. For my situation is this a worthwile approach?
    By the way, thanks for your interest in solving these problems. So many programs now use the flash player but there are so few sources to turn to when problems occur.     

  • Satellite A300 PSAG0A - Games Will Not Display in Full Screen Size

    I have a large number of games installed on my computer. At least 90% of them will not display in full screen size but display in a small window with a large amount of black screen surrounding the window. I am running Windows Vista Home Premium 32 bit. However, I do not think it has anything to do with Windows as my husband runs the same games on his Toshiba Satellite L300, running exactly the same version of windows, and they all display in full screen size.
    Altering the screen resolution makes no difference. And, of course, I do select the full screen option in the games.
    Also, sometimes when I have been playing a game and then closed it I find that my desktop picture has shrunk to the smaller size - the same size as the window in which the game was displayed when I was playing it.
    The games work fine in every other way, it is only this small screen size which is driving me nuts.
    I hope that someone can help me with this!!

    Yes, as far as I can tell I have the latest driver. But, even this is confusing to me because....
    My graphics media accelerator is Mobile Intel(R) 965 Express Chipset Family. The installed driver version is 7.14.10.1329. The release date for this is 2007-09-13, as far as I can tell from web searches.
    However, on the Toshiba website for driver downloads, the available driver version is 8.2.0.1012 PV. The date is 2006-12-28. I have downloaded this driver and attempted to install it. I get the message that it has been installed but, after rebooting and checking the installed driver version is still 7.14.10.1329.
    Perhaps, the 8.2.0.1012 PV version does not actually install because it is older than the currently installed version. I would have thought that the driver version with the higher number would be the newer one, but perhaps this is not the case as the dates do not seem to support this theory.
    So now I ask myself, firstly, if the driver available for download on the Toshiba website is not the newest one, then why is it there?
    Secondly, if it is the newest one then why will it not install on my computer?

  • The menubar will not display in full screen

    Hi.
    I have a strange problem in fullscreen mode, on my Macbook pro 15"
    I LOVE fullscreen, and infact the next macbook I will get is the 11" air because of its size and because full screen is so nice to work with.
    But I have a strange problem which I can't find a solution for.
    Suddenly the menubar will not display it self when I move the mouse to the top of the screen. The only way I can access the menu bar is by exiting full screen (ctrl + Cmd + F) and the toggel it back on after I have used the menubar
    This actually makes fullscreen mode useless and its driving me nuts, because this should not happen on Apple software. I would expect these sorts of behaviour on windows but not in osx.
    Anybody have a hint about what to do?

    https://discussions.apple.com/thread/3881124?start=0&tstart=0     <<<<< GO THERE
    Try this:  make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home()/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
         User/Home()/Library/Caches/com.apple.iPhoto folder. 
    Click to view full size
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.

  • Upgrade - SAP will not restart during MAIN_NEWBAS/STARTSAP_NBAS phase

    We are upgrading from 4.7 to NW 7.0 (SP#5)
    SAP will not restart during the phase MAIN_NEWBAS/STARTSAP_NBAS
    We had to manually apply the kernel (NW 7.2 -#63 - NON UC). This looks OK when we calll DW -version. The T03 system will not start either through the upgrade tool or manually. There is no useful log in
    \usr\sap\T03\DVEBMGS15\work
    The upgrade tool reports this error.
    Checks after phase MAIN_NEWBAS/STARTSAP_NBAS were negative!
    Last error code set: RFC call to subst_get_uvers failed with key
    RFC_ERROR_COMMUNICATION (open): SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed Connect_PM GWHOST=CSIAS9, GWSERV=sapgw15, SYSNR=15 
    LOCATION CPIC (TCP/IP) on local host with Unicode
    ERROR partner 'CSIAS9:3315' not reached
    TIME Wed Aug 31 15:09:36 2011
    RELEASE 720 COMPONENT NI (network interface)
    VERSION 40 RC -10
    MODULE nixxi.cpp
    LINE 2898
    DETAIL NiPConnect: 165.156.101.209:3315
    SYSTEM CALL connect
    ERRNO 79 ERRNO TEXT Connection refused
    COUNTER 550
    Thanks
    Matt

    Thanks Rene, I have updated the ticket with the required information. In the mean time I am interested if anyone else had had a similar problem during an upgrade. We did have an initial error with the crtsidusr command ( setting CLASSICUSERCONCEPT + removing some of the SPCAUT) seemed to fix that. At this point the upgrade failed and we had to manually APYSAPKRN, the log shoewed it wanted the NON UC which was odd as we are including the UC in the upgrade.
    Thanks

Maybe you are looking for