MsiInstaller 1023

This error message on the Windows Server 2008 computer:
Source: MsiInstaller
ID: 1023
Product: Adobe Reader XI (11.0.06) - Russian - isn't possible to set the Adobe Reader XI (11.0.06) service pack. Error state number 1603. Additional data see in the log file C:\Users\ADMINI ~ 1\AppData\Local\Temp\52\MSIbc7be.LOG.
What is the problem?

Similar Messages

Workaround for 1023 byte limit in utl_file

I am looking for a work-around for the 1023 byte limit in PL/SQL's utl_file.put_line.
Here's what I need to be able to do :
I need to extract all columns out of a table into a file. Two of the columns are varchar 2000 bytes.
I am using utl_file.put_line to write out the record to a file.
I get a SQLCODE:1 SQLERRM: User-Defined Exception when extracting certain records out.
Looking at the data that's causing the problem, I see that the 2000 byte columns contain data with length greater than 1000 bytes.
I tried extracting the data using a series of utl_file.put, but that does not help either as it generates the same error after it put's the 2000 byte column.
I need the entire record in a single file, as it needs to be used as input to SQLLOAD.
I tried overloading the fopen with buffer size 32000 and the compiler accepts the overload. However it does not seem to have any effect at run-time.
We are at Oracle 8.0.5.1.0.
Anyone with a work-around/tip??
Thanks in advance.
null

Thanks to all who replied, really appreciate your assistance.
I tried the suggestions of using utl_file.put in a loop to split the input record. I still get the same error message [SQLCODE: 1 SQLERRM: User-Defined Exception ]
The code I am using is as follows :
declare
outfile utl_file.file_type;
cursor c1 is
select col1| |delim| |col2| |.....
from tbl
where ....;
vBuf varchar2(32000);
vMaxLineSize number := 1023;
begin
outfile := utl_file.fopen('/tmp','outfil','w',32000);
open c1;
loop
fetch c1
into vBuf;
exit when c1%NOTFOUND;
begin
vStart := 0;
if length(vBuf) >= vMaxLineSize then
for i in 1..ceil(length(vBuf) / vMaxLineSize)
loop
utl_file.put(outfile,substr(vBuf,vStart+1,vMaxLineSize));
vStart := vMaxLineSize * i;
end loop;
utl_file.new_line(outfile);
else
utl_file.put_line(outfile,vBuf);
end if;
exception
when OTHERS then
utl_file.put_line(logFile,'Error: col1: '| |col1| |' SQLCODE: '| |SQLCODE| |' SQLERRM: '| |SQLERRM);
end;
end loop;
close c1;
utl_file.fclose_all;
end;
The error message occurs only for a few records as a result of which they are not extracted out. I looked at the data and there does not seem to be anything out of the ordinary with the records that errored out.
Perhaps there is some error in the code I am using, that hopefully someone else will be able to spot.
Thanks in advance.

ERROR = e=13 semget(20160,1,1023) (13: Permission denied) [semux0_mt.c 98

Hi Experts,
I installed Java Stack as add-in on our already existing Abap System (NW04s, HP-UX with an Oracle DB) and the following issue I have in the std_server0.out
stdout/stderr redirect
node name : server0
pid : 4626
system name : BWU
system nr. : 01
started at : Tue Sep 29 19:10:59 2009
[Thr 1] MtxInit: 10001 0 0
[Thr 1] *** ERROR => e=13 semget(20160,1,1023) (13: Permission denied) [semux0_mt.c 982]
[Thr 1] *** ERROR => SemRq: Implicit SemInit failed. Key=60 [semux0_mt.c 1629]
Critical Error
Can't initialize JControl Administration
-> Internal program error (rc = -1)
[Thr 1] *** ERROR => ShmDelete: Inv. Key=69 [shmux0_mt.c 3338]
Somebody could help me? Please.

HI everybody,
Thank you all for your suggestion.
Issue resolved by updates a kernel. Additional see note 1336333.
Regards
Sergey
Edited by: Sergey Shtelingq on Sep 29, 2009 8:19 PM

ERROR = e=13 semget(20046,1,1023) (13: Permission denied) [semux.c 93]

Hi Everybody,
Dispatcher is not running . The following error found in dev_disp file
ERROR => e=13 semget(20046,1,1023) (13: Permission denied) [semux.c 939]
In dev_ms
[Thr 1] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from eccr3sox_TU2_00 [msxxserv_mt. 4681]
in stderr2
ERROR => e=13 semget(20046,1,1023) (13: Permission denied) [semux.c 939]
ERROR => DpShmPrfCreate : SemInit SEM_PROFILE [dpxxprf.c 402]
Any idea??
Regards
Santanu

Hi,
dev_w0
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
M sysno 00
M sid TU2
M systemid 274 (HP (IA-64) with HP-UX)
M relno 7000
M patchlevel 0
M patchno 185
M intno 20050900
M make: single threaded, Unicode, 64 bit, optimized
M pid 16542
M
M
M Tue Sep 8 16:05:21 2009
M kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q01=> ThInit, WPStart (Workproc 0 1 16542) [thxxhead.c 1290]
M ThInit: running on host eccr3sox
M calling db_connect ...
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPR3's password
C Connecting as /@TU2 on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0x60000000035969b0 0x600000000359e350 0x60000000035aeb28
C Attaching to DB Server TU2 (con_hdl=0,svchp=0x60000000035aea58,srvhp=0x60000000035b0dc8)
C
C Tue Sep 8 16:05:23 2009
C Starting user session (con_hdl=0,svchp=0x60000000035aea58,srvhp=0x60000000035b0dc8,usrhp=0x600000000359eb68)
C
C Tue Sep 8 16:05:24 2009
C Now '/@TU2' is connected: con_hdl=0, nls_hdl=0, session_id=1177.
C Got SAPR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=0x60000000035aea58,usrhp=0x600000000359eb68)
C Now I'm disconnected from ORACLE
C Connecting as SAPR3/<pwd>@TU2 on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0x60000000035969b0 0x600000000359e350 0x60000000035aeb28
C Starting user session (con_hdl=0,svchp=0x60000000035aea58,srvhp=0x60000000035b0dc8,usrhp=0x600000000359eb68)
C Now 'SAPR3/<pwd>@TU2' is connected: con_hdl=0, nls_hdl=0, session_id=1177.
C Database NLS settings: AMERICAN_AMERICA.UTF8
C DB instance TU2 is running on eccr3sox with ORACLE version 10.2.0.2.0 since SEP 08, 2009, 15:58:27
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20090908 160521 eccr3sox
C build_stmt: reallocating stmt buffer: 256 -> 2000 characters
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,*
.sar,*.gif
I
I Tue Sep 8 16:05:29 2009
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0xc000000028000000, size: 20000768)
M SHM_ROLL_AREA (addr: 0xc00000002a000000, size: 134217728)
M SHM_PAGING_AREA (addr: 0xc000000032000000, size: 67108864)
M SHM_ROLL_ADM (addr: 0xc000000017975000, size: 2672386)
M SHM_PAGING_ADM (addr: 0xc000000010640000, size: 656416)
M ThCreateNoBuffer allocated 560152 bytes for 1000 entries at 0xc000000036002000
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 0xc000000007081000
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation std
X <ES> Info: use normal pages (no huge table support available)
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
B dbntab: NTAB buffers attached
B dbntab: Buffer FTAB(hash header) (addr: 0xc00000003608c090, size: 584)
B dbntab: Buffer FTAB(anchor array) (addr: 0xc00000003608c2e0, size: 319864)
B dbntab: Buffer FTAB(item array) (addr: 0xc0000000360da460, size: 1279360)
B dbntab: Buffer FTAB(data area) (addr: 0xc0000000362129e0, size: 30722048)
B dbntab: Buffer IREC(hash header) (addr: 0xc000000037f61090, size: 584)
B dbntab: Buffer IREC(anchor array) (addr: 0xc000000037f612e0, size: 319864)
B dbntab: Buffer IREC(item array) (addr: 0xc000000037faf460, size: 319808)
B dbntab: Buffer IREC(data area) (addr: 0xc000000037ffd5a0, size: 6144000)
B dbntab: Buffer STAB(hash header) (addr: 0xc0000000385db090, size: 584)
B dbntab: Buffer STAB(anchor array) (addr: 0xc0000000385db2e0, size: 319864)
B dbntab: Buffer STAB(item array) (addr: 0xc000000038629460, size: 319808)
B dbntab: Buffer STAB(data area) (addr: 0xc0000000386775a0, size: 3072000)
B dbntab: Buffer TTAB(hash header) (addr: 0xc000000038967090, size: 2872)
B dbntab: Buffer TTAB(anchor array) (addr: 0xc000000038967bd0, size: 319864)
B dbntab: Buffer TTAB(item array) (addr: 0xc0000000389b5d50, size: 799600)
B dbntab: Buffer TTAB(data area) (addr: 0xc000000038a790c0, size: 5837080)
B db_con_shm_ini: WP_ID = 0, WP_CNT = 22, CON_ID = -1
B dbstat: TABSTAT buffer attached (addr: 0xc00000003d010820)
B dbtbxbuf: Buffer TABL (addr: 0xc0000003c2000110, size: 50000896, end: 0xc0000003c4faf510)
B dbtbxbuf: Buffer TABLP (addr: 0xc0000003c5000110, size: 20480000, end: 0xc0000003c6388110)
B dbexpbuf: Buffer EIBUF (addr: 0xc00000001b800120, size: 4194304, end: 0xc00000001bc00120)
B dbexpbuf: Buffer ESM (addr: 0xc00000001d400120, size: 4194304, end: 0xc00000001d800120)
B dbexpbuf: Buffer CUA (addr: 0xc000000039010120, size: 3072000, end: 0xc0000000392fe120)
B dbexpbuf: Buffer OTR (addr: 0xc000000027800120, size: 4194304, end: 0xc000000027c00120)
B dbcalbuf: Buffer CALE (addr: 0xc000000017c03000, size: 500000, end: 0xc000000017c7d120)
B db_register_param_funcs failed
M *** ERROR => ThCallHooks: event handler db_init for event CREATE_SHM failed [thxxtool3.c 259]
M *** ERROR => ThIPCInit: hook failed [thxxhead.c 2105]
M ***LOG R19=> ThInit, ThIPCInit ( TSKH-IPC-000001) [thxxhead.c 1527]
M in_ThErrHandle: 1
M *** ERROR => ThInit: ThIPCInit (step 1, th_errno 17, action 3, level 1) [thxxhead.c 10521]
M
M Info for wp 0
M
M pid = 16542
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 723]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 259]
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 16542) [dpuxtool.c 268]
END -
Regards
Santanu

SOAP Runtime: SOAP Runtime exception: 1023 occurred in method IF_SOAP_TRANS

Hi ,
we currently have the SAP discovery system setup, i have notice that when i check the system log via sm21 , i recieve hundreds of the following error messages:
SOAP Runtime: SOAP Runtime exception: 1023 occurred in method IF_SOAP_TRANSPORT_BINDING~receive of class CL_SOAP11_HTTP_TPBND at position 1
SOAP Runtime: Exception message: SRT: Processing error in Internet Communication Framework: ("ICF Error when receivin g the response: ICM_HTTP_CONNECTION_FAILED")
Please advise where to check on resolving this error as some services donot work because of this,All services start up fine , i have also checked /nsicf and some RFC ,but have not found any thing specific.
Kind Regards
A.

Hi,
I know this question was asked a long time ago but you should check out the following note and fix to un-release the "osp" background jobs running under SM37.
Note 1113842 - Discovery System V3 Central Note

ICX_SOAP_CORE: 1023 occured in method IF_SOAP_TRANSPORT_BINDING~RECEIVE

Hi,
i have a WSDL generated client proxy. After repeated succesful calls, this proxy raises repeated exceptions like "ICX_SOAP_CORE: 1023 occured in method IF_SOAP_TRANSPORT_BINDING~RECEIVE".
The importing of correction instruction of node 1326434 hasn't corrected the error.
In Transaction RSRFCTRC no logging is available, though it is enabled in LPCONFIG.
Any ideas for the exception?
Andreas
Edited by: AF on Mar 2, 2010 6:07 PM

Hi,
I know this question was asked a long time ago but you should check out the following note and fix to un-release the "osp" background jobs running under SM37.
Note 1113842 - Discovery System V3 Central Note

SOAP Runtime exception: 1023 method IF_SOAP_TRANSPORT_BINDING~receive

SOAP:1.023 SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: HTTP COMMUNICATION FAILURE")
SOAP Runtime exception: 1023 occured in method IF_SOAP_TRANSPORT_BINDING~receive of class CL_SOAP11_HTTP_TPBND at position 1
Getting the error above when making a web service call to external web service. Used to work all the time. Getting the error all the time now.

Hi.
Check the response. Sometimes this error occurs due to an empty response.
Regards.
Rafael Rojas.

Web service error handling (SOAP 1023 SRT: ICM_HTTP_CONNECTION_FAILED)

Hi there,
When consuimng our web service, sometimes we get the error "SOAP 1023 SRT: Processing error when receiving the response: ICM_HTTP_CONNECTION_FAILED" and this happens when we can't connect to the other system. The requirement is to automatically resend the transaction after +/- 10 seconds. Is there somewhere on the web service settings that will enable us to achieve this without having a background job running every minute?
Thanks.

Hello,
 
The first thing you should do is to check that your application server can reach the service your are trying to call. I suggest to try a:
 
telnet <remote_service_url> <remote_service_port>
 
from the command line of your server.
 
You should get a blank screen if your server reaches the remote server and something like connecting to <remote_service_url> if you don't.
 
Yours,
 
Joseba M. Iturbe

Display more than 1023 Columns in alv

can we display more than 1023 columns in alv. please provide inputs on any approach that can be followed to achieve this.
Thanks.

Hi,
just for the record. Here's the code to create a table with 10000 columns, in this example all of type vendor. It could be modified a little to create any dynamic table. Without any visible limits and can be displayed in SALV.
DATA:
 lv_lifnr TYPE lifnr,
 lv_numc7 TYPE numc7,
 lt_components TYPE cl_abap_structdescr=>component_table,
 lo_struc_descr TYPE REF TO cl_abap_structdescr,
 lo_tdescr TYPE REF TO cl_abap_tabledescr,
 lr_tab TYPE REF TO data.
FIELD-SYMBOLS:
 <component> TYPE LINE OF abap_component_tab,
 <range_tab> TYPE STANDARD TABLE,
 <tab> TYPE table.
* build dynamic table
DO 10000 TIMES.
 APPEND INITIAL LINE TO lt_components ASSIGNING <component>.
 <component>-type ?= cl_abap_datadescr=>describe_by_data( lv_lifnr ).
 lv_numc7 = sy-index.
 CONCATENATE 'FIELD' lv_numc7 INTO <component>-name.
ENDDO.
lo_struc_descr ?= cl_abap_structdescr=>create( lt_components ).
lo_tdescr = cl_abap_tabledescr=>create( lo_struc_descr ).
CREATE DATA lr_tab TYPE HANDLE lo_tdescr.
ASSIGN lr_tab->* TO <tab>.
APPEND INITIAL LINE TO <tab>.
I discovered that it takes some time (15 seconds or more) to create, even F1 and F4 in the SALV table use considerable time to pop up, I think (SAP never imagined
But it works - and the code is so simple!
Kind regards,
Clemens

PRKC-1023 : Invalid IP address format & PRCR-1001 Error in root.sh

Hello All,
At prompting to execute root.sh, I get the following errors. I am installating 11.2.0.1 Grid Software. I am not sure why it is taking the virtual IP name.
The details give are on Specify Cluster configuration window is :-
Scan name : rs1pre91cl
Both nodes edited/added as below
hostname Virtual IP name
rs1pre91dvdbaa01.pre.ccosvc.com rs1pre91dvdbaa01vip.pre.ccosvc.com
rs1pre91dvdbaa02.pre.ccosvc.com rs1pre91dvdbaa02vip.pre.ccosvc.com
Identify network interfaces option used to show eth0 for public (172.) and eth1 for private (192)
SSH connectivity already established, but tested using this screen.
Error in root.sh
PRKC-1023 : Invalid IP address format: rs1pre91dvdba01vip
add nodeapps -n rs1pre91dvdba01 -A rs1pre91dvdba01vip/255.255.252.0/eth0 on node=rs1pre91dvdba01 ... failed
PRCR-1001 : Resource ora.net1.network does not exist
add scan=rs1pre91cl ... failed
When running pre-checks installation -- it shows me successfull.
./runcluvfy.sh stage -pre crsinst -n rs1pre91dvdba01,rs1pre91dvdba02 -fixup -verbose > ~oracle/run_pre_install_cluvfy.out.1
Has someone experienced this error and what are the steps to fixup
Thanks

We have also experienced similar issue with 11.2.0.2 on HPUX:
srvctl add nodeapps -n host2 -A "host2-vip/255.255.252.0/lan0|lan3"
PRKC-1023 : Invalid IP address format: host2-vip
Replacing host2-vip with IP address works fine.
More surprisingly, on one node, it accepts same command with vip format, whereas on others it is expecting IP address in command. ( although vip names are resolvable to its IP address from all nodes--checked using nslookup)

MsiInstaller - 1024

This error message in event log:
Source: MsiInstaller
ID: 1024
Product: Adobe Reader XI - Russian - isn't possible to set "{AC76BA86-7AD7-0000-2550-7A8C40011008}" service pack. Error state number 1625. The Windows installer doesn't manage to create logs for the help when debugging during installation software packages. For receiving instructions for switching on of support of log use the link: http://go.microsoft.com/fwlink/? LinkId=23127
What's the problem?

Please provide some more information:
1. Exact version of Operating System along with bit version (32 or 64 bit)
2. Are trying to install Acrobat 11 in Russian language when you get above error?
3. What is the language of Operating System.
Regards,
Anoop

Having trouble with Error #1023:stack overflow

I've run into this error ican't seem to get around. I've redone this code many times and it still happens. Part of the problem is its randomness, sometimes it happens right at launch and sometimes after 5-10 mins. I've tried to look up how to fix it but haven't seen how my problem relates to those that have something similar. As far as i can tell i dont have an recurrsion of code. Here's a copy of the error that pops up.
Error: Error #1023: Stack overflow occurred.
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2Listeners()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2StartPoint()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2Listeners()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2StartPoint()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2Listeners()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2StartPoint()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2Listeners()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2StartPoint()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2Listeners()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2StartPoint()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2Listeners()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2StartPoint()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2Listeners()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2StartPoint()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2Listeners()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2StartPoint()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2Listeners()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2StartPoint()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2Listeners()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2StartPoint()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2Listeners()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2StartPoint()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2Listeners()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2StartPoint()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2Listeners()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2StartPoint()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2Listeners()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2StartPoint()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2Listeners()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2StartPoint()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2Listeners()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2StartPoint()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2Listeners()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2StartPoint()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2Listeners()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2StartPoint()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2Listeners()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2StartPoint()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2Listeners()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2StartPoint()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2Listeners()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2StartPoint()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2Listeners()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2StartPoint()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2Listeners()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2StartPoint()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2Listeners()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2StartPoint()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2Listeners()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2StartPoint()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2Listeners()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2StartPoint()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2Listeners()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2StartPoint()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2Listeners()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2StartPoint()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2Listeners()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2StartPoint()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2Listeners()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2StartPoint()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2Listeners()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2StartPoint()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2Listeners()
 at MathRaceradvanced3_fla::MainTimeline/bigSpaceShip2StartPoint()
Here's the code, basically what i'm doing is placing the object on screen at a random Y position.I do have a check when it loads it isn't right on top of another object and if it does it redoes the Y Position. Then i give it a random scale to the original object and speed. Then when the objects reachs the other side of the screen i move it back to the start and randomize the size,speed, and Yposition again. The error seems to happen when it moves back to the other side. And when it happens it doesnt stop the program, the object just never reappears. Any help would be greatly appreciated.
var bigSpaceShip2:MovieClip=new bigSpaceShip();
var bigSpaceShip2Speed:Number;
var bigSpaceShip2Scale:Number;
var bigSpaceShip2YPosition:Number;
var bigSpaceShip2Reset:Boolean;
bigSpaceShip2SetUp();
function bigSpaceShip2SetUp():void{
 bigSpaceShip2Speed= ((Math.random()*.95)+.75);
 bigSpaceShip2Scale= ((Math.random()*.30)+.35);
 addChildAt(bigSpaceShip2, 1);
 bigSpaceShip2StartPoint();
function bigSpaceShip2StartPoint():void{
 bigSpaceShip2.scaleX=bigSpaceShip2Scale;
 bigSpaceShip2.scaleY=bigSpaceShip2Scale;
 bigSpaceShip2.x=0;
 bigSpaceShip2.y=(Math.ceil(Math.random()*650))+50;
 bigSpaceShip2YPosition=bigSpaceShip2.y;
 if((bigSpaceShip2YPosition-bigSpaceShip1.y)>(-200) && (bigSpaceShip2YPosition-bigSpaceShip1.y)<2000){
 bigSpaceShip2Reset=true;
 }else{
 bigSpaceShip2Reset=false;
 bigSpaceShip2Listeners();
function bigSpaceShip2Listeners():void{
 if(bigSpaceShip2Reset==false){
 bigSpaceShip2.addEventListener(Event.ENTER_FRAME, bigSpaceShip2SpeedSet);
 bigSpaceShip2.addEventListener(Event.ENTER_FRAME, bigSpaceShip2CheckReset);
 }else{
 bigSpaceShip2StartPoint();
function bigSpaceShip2SpeedSet(e:Event):void{
 bigSpaceShip2.x+=bigSpaceShip2Speed;
function bigSpaceShip2CheckReset(e:Event):void{
 if (bigSpaceShip2.x >1400){
 bigSpaceShip2.removeEventListener(Event.ENTER_FRAME, bigSpaceShip2SpeedSet);
 bigSpaceShip2.removeEventListener(Event.ENTER_FRAME, bigSpaceShip2CheckReset);
 bigSpaceShip2StartPoint();

Hi enaz13,
The default recurring of a function is only 256 times but u calling same function endlessly that is the reasong stack over flow error is coming

Utilizing server ports 0-1023 on Solaris

By default, Solaris does not allow Java or any other applications open server ports on ports 0 - 1023, unless the application is executed by root. Does anyone know how can I get a non-root user, Java application priviledges to open a server port in this range?
Thanks,
Kevin

Port number 0--1023 are reserved for well known protocols so no other applications except the servers of those well known protocols can use those ports.
Normaly if you are writing your own server you should avoid using above range in any os.
Some OSs does not restrict the use but using above range will only create confuctions.
check the IANA website for more information

1023 WARN: No client context space available in handler

Hi Users,
I'm getting below tuxedo warning in ULOG:
"1023 WARN: No client context space available in handler"
I did google for above error and got below results from one of oracle documentation website for Tuxedo:
" Description
While setting up a connection for a new workstation client, the WSH ran out of room to keep context for clients.
Action
This error should occur rarely since the WSL transfers control of workstation client connections to WSH programs based on their current degree of multiplexing. Contact BEA Customer Support. "
Does anyone had any clue to rectify this issue.
Regards
Fakhruddin.

Hi Todd,
WSL SRVGRP=CLIENT SRVID=200
# -t to support pre Tuxedo 7.1 clients
#CLOPT=" -t -- -n //<hostname>:<hostport> -x 10"
CLOPT=" -t -- -n //austria:10008 -x 30 -T 30"
SEQUENCE=100
#Second workstation listener.
WSL SRVGRP=CLIENT SRVID=205
CLOPT=" -t -- -n //austria:10000 -c 4096 -K both -H //127.0.0.1:MMMM -p 10050 -P 10050 -T 30"
RESTART=Y MAXGEN=5
SEQUENCE=100
# ConnectStore Citrix listener
WSL SRVGRP=CLIENT SRVID=210
CLOPT=" -t -- -n //austria:10100 -p 10101 -P 10104 -x 50 -H //172.16.48.108:10100 -T 20"
RESTART=Y MAXGEN=5
SEQUENCE=100
Note: This is the same WSL config posted in last replies. Again posted just for quick reference.
As per the above configuration for WSL, the first WSL configuration supporting unlimted or any number of user session at a time, so this WSL hopefully wont give me any error. The second WSL has only one port so it can support at most 10 session at any given time and the third one has 4 ports so max session suported is 200 at any given time. Second WSL configuration is enough to support that many session but still the error is coming from this WSL only. Third WSL configuration is fine because at any given not more than 120 - 130 sessions are active.
So the error is basically coming from second WSL. Will increasing the multiplexing factor from 10 (by default) to 50 really help us? Is there any other factor which could results in this type of errors? Kindly suggest.
Thanks & Regards
Fakhruddin.

WANTED: workaround for error in fontmgr.cpp line 1023 when loading LV 6 VIs

Hi,
when loading existing VIs from LV6 with our new LV7Express the program (running under Linux 8) crashes with an error in fontmgr.cpp line 1023.
Is there a workaround?
Thanks.

Hi dieter,
there is normally no workaround for internal LV errors. Report the error through the support pages to NI. Together with your VIs they will be able to fix the problem.
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

MsiInstaller 1023

Similar Messages

Maybe you are looking for