MSS: Compensation Planning Scenarios (deselect users u00BF?)
Hello
we are using EP NW2004s with Manager Self Service Business Package for ERP 2005.
We have a problem in Compensation Plannig scenarios.
When we clic on the iview, we see ALL employees selected (check box on the left hand side are selected)
What we want is when accesing Compensation planning iview, display employees with check box unselected.
Do you know how to do it¿?
any parameter on ivew¿?
thanks and Regards
Noemi
Hi John,
Did you check with OSS? We have ECM up & running and completed two annual merit cycles in MSS. Never had this issue..
Regards,
Suresh Datti
Similar Messages
-
New salary is not updating in MSS Compensation Planning (ECM)
Hi
In MSS Compensation Planning (ECM) iView, when we are applying a percentage increase for a particular employee the new salary column is not updating when we press enter or recalculate. The value is changing intially when we press refresh property for the iView, for the next time the value is not changing even when we press the refresh also.
Regards
SureshHi Suresh,
What is the solution..
because we are also facing a similar issúe ..
our new salary is same as the compensation amount....
but what we are looking for is
new salary = compensation amount +annual base salary
Where do we do this?
tks rgds
g3 -
MSS Compensation Planning Notes Column Stroing garbage
Hi ,
Notes column in Compensation Planning ( MSS 600 , EP 7) when edited and long text ( > 78 )is entered is storing garbage.
I know the line/ row length of a the table communication the rfc is 78 fixed.
The problem is that the code below is correctly cutting the text of lines of 78 each but then does not store the table with multiple rows only the top row gets over written and stored.
Any ideas - how to add multiple rows to it ( the line highlighted ) -
Hrecm00Text textList = new Hrecm00Text();
String bufferText = "";
int index = 0;
if (noteText != null) {
while (index < noteText.length()) {
if (index + 78 < noteText.length()) {
bufferText = noteText.substring(index, index + 78);
} else {
bufferText = noteText.substring(index);
textList.setText_Line(bufferText);
index = index + 78;
input.addText_Tab(textList);
bufferText = "";
} else {
input.setText_Tab(new Hrecm00Text.Hrecm00Text_List());Hrecm00Text is defined in Java Dictionary as structure . .. . of line text_line with length 78
-
MSS - compensation planning - compensation profile page
Dear All,
I have a question regarding a simple customization of a Standard SAP content page.
In the Compensation Planning iview, after the search is done a list of employees is displayed. Then single employee name is selected, and new window is launched displaying the compensation profile page:
pcd:portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/com.sap.pct.erp.mss.pages/com.sap.pct.erp.mss.hcm/com.sap.pct.erp.mss.compensation_profile
I would like to hide some of the iviews that are shown in this page, however since it is Standard SAP content I do not want to modify the provided by SAP page. I plan to make a delta link copy of this page however my problem is that I do not know how to point the link from the result list in the Compensation Planning iView to the customized Compensation Profile page.
Any help is appreciated.
Thanks in advance,
VenelinYou are right Veneliin.....to achieve your desired result you have to first copy the standard compensation profile page and paste it as delta link in your own folder.
Now you need to open the MSS role that you are using..(I believe it is your own custom role..)
Navigate to MSS (Role)-> Overview -> Team -> Employee Information..
You will find a page called "Compensation information" in it...
Delete this page and replace it with your own copied (as delta link) page.
Now you can modify your custom compensation information page....
Any doubts then revert back. -
MSS - Compensation Planning and Approval Issues
Hi Experts,
We are implementing MSS for one of our clients (only MSS) and face a few issues.
1. The Submitter is able to view and approve the Compensation plan for his reportee........instead it should be the submitters manager who should only be able to approve ie Compensation approval should be done by M+1 level but it is right now done by the manager himself. How can this be done? Any setting through which we can restrict this?
2. We would like to restrict the Compensation submission to the Managers only. While we are testing we found that one of us who is not a manager can still create and submit the Compensation change. We don't want this to happen so that even by error the MSS Role is assigned to a non-manager, he should still not be able to make any changes.
Any pointers will be highly appreciated.
Thanks and Regards,
Arun E VHi Arun,
Did you resolve your issue? what MSS version you are using for Compensation Planning and Approval, are you able to see employees for Approval in Planning Overview Application, even i am not able to Employees for Planning Overview Appliation, i am able to see employees in Compensation Planning Application only.
Please help me on this configuration for Planning Review of Compensation, is there is any IMG configuration is required for view employees, Approval and rejections through Planning Overview.
Please help me on this one.
Thanks in Advance.
Thanks and Regards,
Abhi. -
All,
For MSS ERP 2005 Web Dynpro based business package, can you please point me to some direction which will let me to configure the FPM based Compensation Planning Page.
According to the documentation http://help.sap.com/saphelp_erp2005vp/helpdata/en/90/a5391ed9a64c9b9986c3e669632968/content.htm
the integration section mentions that we can launch the compensation profile from this page. But I am not sure how to implement this.
Adding other iviews like Long Term Incentives, etc to this pages doesn't automatically populate the data. I am missing some steps on configuring the FPM application.
Can you please help?
Thanks,
MSHi Aryani,
But we are not making any customization.It should work by default .When an error is coming for a manager in display then the manager cannot be able to go and save the compensation increase for that employee or employees .So,my question is there any note for this problem.
Thanks,
Rao. -
Add a button to MSS Compensation Planning screen
Hi Gurus,
I have a requirement from my client to add a button in Compensation Planning screen to Download the list.
However, I couldn't find a configuration in IMG to add it.
The Compensation screen is a WDJ and we do not have Java expert in our team to enhance it.
Appreciate your solutions & ideas.Hello,
Unfortunately you will have to implement Enhancement Pack 5 to have this functionality in standard. Otherwise you do have to modify the Java coding.
Cheers
Lucas -
MSS-Compensation Planning-Planning Overview Error
Hi All,
When i was trying to executing Planning Overview(Compensation Approval) in MSS i am getting below error which i never seen
A fatal error has occurred. Please inform your system administrator
No compensation review is assigned to your user
We are using BP MSS EHP4.
If any one facing any issues with this application please let me know.
Thanks in Advance.
Thanks and Regards,
Abhi.Abhi,
Make sure your user ID is linked to employee who is manager of an org unit.
regards
Sridhar -
Increase no. of rows in compensation planning without NWDI
Hi all,
Is there any way to increase the no. of rows of a table in MSS compensation planning? We dont have NWDI in place. As far as I know this is a web dynpro java component and can I do this customization without NWDI by making any changes in r3 or portal side? Please advise.
Thanks
KHello Bala,
is seems to be ctrl + mouse right click
Thanksyou,
Regrds
Vijai -
Additional Columns in ECM - Compensation Planning view
Hello
We have a requirement to hide some columns in MSS Compensation Planning view.
I know that this column framework can be configured using OADP.
But my issue is that, we wanted to hide the specific columns (like Amount) only for one compensation plan and not other plans (all these plans are in the same category "Additional payments").
Can the column framework be made Compensation Plan specific?
Could anybody suggest me?
Thank you & Regards
Raghu KolukuluriHi Saurabh,
I have similar requirement for ECM implementation that for a specific comp plan I want to display two columns otherwise not. You mentioned that you could achieve it via OADP; however I can't find any linkage between the comp plan and data view.
I can see standard data views (following and more)
MSS_ECM_APR_BON Approval: Bonus
MSS_ECM_PLA_BON Planning: Bonus
MSS_ECM_REV_BON Planning: Bonus (Review)
And I believe If I change the view for MSS_ECM_*_BON; it will affect all the views related to bonus plans. I was able to add 2 columns there too.
Now question is -- Is it possible to give drop-down values to one of these columns ? e.g. my column is Status and I want to allow only 5 statuses, can I bring the drop-down in the portal without any WDJ application change ? I'd like to achieve it via config if possible.
At the column definition/config level in SPRO, I can see following:
Convers. Rout.
FM for Column Contents
FM from Column Framework
Service Key
Can I use any of these to achieve such drop-down?
Please let me know if you have any clue.
Thank you
Krupa Pancholi -
Compensation Planning Iviews in MSS
Dear Team,
From the R/3 end, the ful cycle for Compensation Planning is working.
Comming to the MSS part in portal, although we find Iviews for Compensation Planning and Approval, these two pages display only blank page.
Required Authorizations have been maintained. Please help me what else to be maintained
Regards
...SadhuYa, Siddharth...SAP_ALL is maintained for this test user.
I beleive authorization may restrict user to view Org Units or Employees, but in my case the whole page displayed is blank.
What i feel is some technical config might be missing.
Please let me know if any Services/ Resources and PCD paths to be maintained. As these are standard Iviews, the standard services are available, but if any modifications required for this ?!
Regards
...Sadhu -
MSS---Compensation----Review Planning Approval Status Problem
Hi All,
I configured MSS Compensation Review Planning successfully, i was able to see my reporting structre in Review Planning iView properly.
I am having my organizational structure with five level approvals.
Whan i was submitting Compensation plan for my employees as an first level manager it went to higher level for approvals. as an higher level manager i rejected what ever the lower level manager was submitted for approvals. The status "rejection" was updating fine in infotype 0759 without running any reports.
again i submitted for approval as an first level manager to higher level manager for approval, this time i approved as an higher level but the "Approved" status is not updating in infotype 0759.
We are facing this issue with all level managers.
This is the first i am configuring MSS EHP4 Compensation Review Planning.
If any one facing this issue and having solution, please provide the proper solution.
Thanks in Advance.
Regards,
Abhiram.Can u pls update the solution
Thanks,
Chowdary -
MSS Customization - Compensation Mansgement - Compensation Planning
Hi,
I need to do some custom enhancements on Compensation Mansgement -> Compensation Planning screen.
We created a track and i imported the track from NWDS. My issue here is
1) When i import a track, i see two things 'DEVS' and 'CONS'. What's the difference between the two.
2) Do i need to create a client in DTR or shall i import directly?
3) I imported MSS DEVS and when i see in my DC, i couldn't able to expand them.(the plus symbol not appearing as no sub nodes). Am confused now whether am going correct or not. If yes, shall i create a project from this step and proceed ahead?
4) How am going to find the source code for Compensation Mansgement -> Compensation Planning screen screen? Any idea on this?
Thanks for ur help.
- Santosh.DEVS and CONS are two different build spaces .
you need a create a client in DTR to import the code. -
Adobe interactive form for flexible compensation plan
Dear Experts
I am new to adobe interactive form. I have to develop a form for Flexible Compensation Plan Structure in this form when an employee enter his employee id all the data should be displayed in the form and side wise a blank text field
will come for few fields in which user fill the data according to his requirement .Is there any function module is there to retrieve the data. or please suggest the data how to do?
Scenario in Details
Employee ID 001
Employee Name XYZ
Grade Code M4
Department Code SAP competency Center
Salary Head || Standard Amount || Desired amount
Basic Salary || 18,342 || 18,342
Children education allowance || 2,201 || 2,201 (Blank text field user enter the value)
Transport allowance || 2,000 || 2,000 ( Blank text field field user enter the value)
is there any function module is available or i have to create the function module . Experts please suggest the idea in steps.
Thanks in advance.
Chitta Ranjan Mahato
Moderator message: wrong forum, please have a look in the forum for "Adobe Interactive Forms".
Edited by: Thomas Zloch on May 12, 2011 4:23 PMHi,
Pleaes find the sample codes for WD Java...
https://www.sdn.sap.com/irj/sdn/developerareas/webdynpro?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d
Regards,
<i><b>Raja Sekhar</b></i> -
Add link to new column in compensation planning plan screen
Hi Gurus!
I am in need of help in adding a new column to the Compensation Planning Screen for MSS portal (second screen or the PLAN screen). I need to add a column which is already configured in SPRO for performance rating. I am already able to show the column however I also need to make it clickable wherein the user will click and will be able to modify the performance rating on a pop-up screen. After the modification, he can close the pop-up and will be back in the compensation planning screen. I checked and I can configure the service key in the columns to make it clickable but they all make use of Java Webdynpro. By any chance, is there a way to use ABAP Webdynpro to achieve my requirement like passing the PERNR and opening a pop-up window?Dear,
Before posting any threads plz search in SDN for ur reference below is one link
screen exit for VA01
Cheers
fareed
Maybe you are looking for
-
I don't have permission to access certain folders in my external hard drive?
Every year at my college, we get our laptops re-imaged and completely wiped of all their data for new programs, etc. Prior doing this, I backed up all my files onto a WD external hard drive. This is not the first time I've gotten my macbook wiped or
-
Content Management Configuration in WebLogic Portal 9.2 Beta
Hello All, I am aware of configuring Content Management System to Third Party CMS using a DMBase directory reference in the application-config.xml in WLP 4.0, 7.0 and 8.1 Versions... This also include the DocumentConnectionPool to point to the Databa
-
Cfoutput query and form field names
I have a form that have two field inputs. I would like to repeat the form fields as part of a cfoutput query. The first field of the form automatically populates the different person's name (via cfoutput query) and this form field is called "tenant".
-
I am unable to pair my new apple wireless keyboard with my new i-pad. It keeps saying not paired. What can I do to pair it?
-
I tunes is running slow how do i make it go faster?
I tunes is running slow how do i make it go faster?