MSS/ESS in Europe

Do you know that Bosnia and Azerbaijan have country MSS/ESS portal screens as part of the offering?
Edited by: Magdalena Wlodarz on Sep 25, 2009 1:12 PM

HI,
Check it out by following infomration
Country-Specific Services
Use
In this IMG activity, you define country-specific services. When an employee starts a service, the system determines the employee's country grouping and checks if there is a country-specific service definition in the V_T7XSSSERSRVCG and V_T7XSSSERSRVCGC views.
If there is a country-specific service definition, the system uses this definition.
If there is no country-specific service definition, the system uses the general service definition in the V_T7XSSSERSRV and V_T7XSSSERSRVC views. If the general service definition does not contain a resource object, the system does not display the service (see example 2).
This enables you to define country-specific variations of services for certain countries while using a general service definition for all other countries.
Activities
Examples
Example 1
Your company has employees in seven different countries:
Germany (01)
Austria (02)
Switzerland (03)
Canada (07)
USA (10)
(Number in brackets = country grouping)
The service for displaying a salary statement is the same for Germany, Austria, and Switzerland. For Canada and the USA, you need services with additional content.
You define a general service for displaying the salary statement in the V_T7XSSSERSRV and V_T7XSSSERSRVC views.
You define two additional services for the country groupings 07 and 10 in the V_T7XSSSERSRVCG and V_T7XSSSERSRVCGC views.
When an employee from Germany, Austria or Switzerland starts the service for displaying salary statements, the system uses the service definition in the V_T7XSSSERSRV and V_T7XSSSERSRVC views.
When an employee from Canada or the USA starts the service for displaying salary statements, the system uses the service definition in the V_T7XSSSERSRVCG and V_T7XSSSERSRVCGC views.
Example 2
Your company has employees in two different countries:
Germany (01)
Switzerland (03)
(Number in brackets = country grouping)
There is a service that is only relevant for employees from Switzerland.
You define a general service without a resource object in the V_T7XSSSERSRV and V_T7XSSSERSRVC views.
You define a country-specific service with a resource object for country grouping 03 in the V_T7XSSSERSRVCG and V_T7XSSSERSRVCGC views
This service is only displayed for employees in Switzerland.

Similar Messages

  • MSS/ESS - PCR application

    Hi all,
         I'm new to the BP MSS/ESS and before make any change on WD applications, I would like to read your advices.
         We need to create a validation on PCR(everytime a PCR is submitted several Infotype fields must be checked), where should I go for these changes? Straight on STD Web Dynpro application(in this case is MSS/PCR application) or is there a t table on SIMG_SPORT customization which I can provide this validation? How would you guys proceed on this case?
    Thanks,
    André

    Hi Andre
    This is part of the J2EE setup, you need to create an HTTP setup using Visual Administrator as described in the following link
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/43/27098edb036025e10000000a422035/frameset.htm
    Thanks
    Michael

  • Is it possible to translate MSS/ESS WDJ content without using NWDS?

    Hi there, is it possible to translate MSS/ESS WDJ content without using NWDS? CTRL+Right Click allows only to hide the text element, portal content translation doesn't allow to translate Web Dynpro Java content.

    Hi,
    Using CtrlRight click you can modify the names, hide the text . on the ESS/MSS ivew's preview  and cTrlright cllick.
    then you will get options to hide,change the text . etc.
    For deploying,changing  the WDJ files you need NWDS. without NWDS it's not possible
    regards
    mahesh

  • MSS/ESS training required in Banglore

    Hello Xperts,
       I would like to get a training in MSS/ESS either in batch/Individual in short term period, my preferred location is Banglore, If any one hav idea of any institutes/personal trainers pls let me know, pls mail me to [email protected]

    you might want to ask that question over in the E-Business Suite forums, or perhaps look up 'location' on Oracle's education website at http://education.oracle.com (and remember to set your country).

  • Portal role in MSS/ESS

    can we use the new MSS/ESS without the Portal? the new MSS/ESS are based on WebDynpro, and WebDynpro applications run as stand-alone J2EE applications.
    thanks in advance

    The new MSS/ESS based on web dynpro is tightly integrated with Enterprise Portal and utilizes a lot of functionality from portal. So while it may be theoretically possible to access some parts without portal, but for production use one is better off with going the integrated with portal route.
    - Pankaj

  • MSS/ESS customizations

    Hi all,
         I'm a bit new regarding MSS/ESS customizations and I would like to know where can I find the right customization path in SIMG_SPORT / SPRO or t-code for this error message on portal page :
         "The properties for destination FP_ICF_DATA of type HTTP could not be located".
    Thanks in advance,
    André

    Hi Andre
    This is part of the J2EE setup, you need to create an HTTP setup using Visual Administrator as described in the following link
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/43/27098edb036025e10000000a422035/frameset.htm
    Thanks
    Michael

  • How to install MSS/ESS?

    Hi!
    We have some EP7 running well.
    Now we consider to install MSS/ESS on them.
    Could you direct me to some guide or blogs about the procedure to install MSS/ESS?
    Thanks a lot!

    Tina,
    Welcome to the forums .
    You might want to refer to these documents for details.
    [How to Deploy ESS/MSS Business Packages through SDM|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0df0afb-44fb-2b10-46b1-c026264bcbc4?QuickLink=index&overridelayout=true]
    [SAP Netweaver ESS/ MSS Configuration|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0518321-5506-2c10-2ea8-d6f9d03c539a?QuickLink=index&overridelayout=true]
    Good Luck!
    Sandeep Tudumu

  • List of MSS & ESS Forms

    Hi,
         I am looking for List of forms in MSS & ESS.
    Thanks

    List varies depending on whether you are on Enhancement pack or not, and on which enhancement pack...
    check this link below , if you are on EhP2 you can find the list in tcode HRASR_DT.
    [_http://help.sap.com/erp2005_ehp_04/helpdata/en/fe/1bd54243063658e10000000a155106/frameset.htm_|http://help.sap.com/erp2005_ehp_04/helpdata/en/fe/1bd54243063658e10000000a155106/frameset.htm]
    regards
    Sridhar

  • Leave Approval in MSS/ESS

    Hi All
    I have a problem. I have configured ESS/MSS for my client. In the leave request section, an employee can apply for a leave. For approval, the default approving authority is visible.When a leave is applied, the system shows that it has been successfuly applied.Even the qouta is deducted.But where does this request go for appoval?
    when logged on by the approver with his own id in MSS, nothing is visible.
    So where is the approval done?Is it in Business Workplace or in MSS.
    Please help and let me know what config is required.

    First of all check whether the leave request was routed to the
    user you mention, UWL is nothing  but a front end view
    of SBWP, What items you see in UWL are available in SBWP
    You can see the Leave Request Work items in SBWP
    but cant execute them as it is a java application

  • Pictograms for Self-Service (MSS/ESS)

    Hi Carmen,
    First Question: How upload this Pictograms in the t.code SE80?
    Right click on Pictograms folder > Import MIME Objects
    Take in count you're using by this way a standard folder.
    To use a custom folder, for ESS i suggest you ask for your Basis guy to generate another location in your server, then save your custom pictograms there. After that, create a resource that refers to the image, using 'Server for Resources' by this way;
    Define:
    1) a server for resources in SPRO > Personnel Mgmt > ESS > General Settings > Homepage for Self-Services > Resources > Define Server for Resources
    2) a resource in SPRO > Personnel Mgmt > ESS > General Settings > Homepage for Self-Services > Resources > Define Resources, that refers to a image and use the new server defined; use the URL of Resource Object field with relative reference (e.g. /new_portrait.gif), and complete the server field with the server created before (can be a local server)
    3) a resource that represents a page area, that use the resource as picture
    For MSS you can do the same, by associating the customizing from the MSS area group page.
    Second Question:
    For the Pictograms in the MSS , Where Are stored, How can upload this Pictograms?
    In the same route that ESS, which depends on your installation folder; check with your Basis guy
    For MSS, since ERP2005 versions, the pictogram is obtained from 'Pictogram...' property of Portal objects, but you can blank this property and use the ERP customizing to set your own custom images, handling as described in point 1.
    Regards

    Hi Sergio.
    We are using ECC 6.04, BP 1.41 for ESS and MSS.
    I checked the property Workset Map Pictogram for the following Image:
    [Image |http://www.freeimagehosting.net/uploads/fa5e7b7e0a.jpg]
    And this have the property Workset Map Pictogram in blank for the Workset Team of the Image of Above.
    You says:
    "You can blank this property and use the ERP customizing to set your own custom images, handling as described in point 1."
    Configure Homepages and Area Pages => Areas=>Define Areas
    [Area|http://www.freeimagehosting.net/uploads/fbf291613f.jpg]
    Where is related the Pictogram for the Workset Team of the Image of Above in the ERP Customizing?
    Thank in advance for your help.
    Best Regards.
    ===============
    Hola Sergio.
    Nosotros estamos usando ECC 6.04, BP 1.41 for ESS and MSS.
    Yo verifique en el sistema la propiedad Workset Map Pictogram como se detalla en la siguiente Imagen:
    [Image |http://www.freeimagehosting.net/uploads/fa5e7b7e0a.jpg]
    Lo que veo es que la propiedad Workset Map Pictogram esta en Blanco para el Workset Team(Equipo) en el portal, sin embargo el pictograma es mostrado.
    Tu dices lo siguiente:
    "You can blank this property and use the ERP customizing to set your own custom images, handling as described in point 1."
    Yo entre en el SPRO a la siguiente ruta y busque las Paginas de Area y lo que encontre fue lo siguiente:
    Configure Homepages and Area Pages => Areas=>Define Areas
    [Area|http://www.freeimagehosting.net/uploads/fbf291613f.jpg]
    Yo quiero saber como se relaciona el Pictograma para el Workset Team de la Imagen que esta arriba en  la parametizacion y poder colocarle un Pictograma diferente por ejemplo al Workset Team, sabiendo que esta propiedad en el portal esta en Blanco?
    Saludos Cordiales
    Carmen-

  • MSS/ESS Business Package installation checklist

    Hi,
    Recently I started to work on a SAP partner's ECC6.0 SAP environment for ESS/MSS purposes, and am trying to determine if Business Package for ESS/MSS is already installed. I am told that all the software and components are installed and there are no restrictions. FYI, I am able to all of SAP HCM application areas without any issues.
    Is there a way to know or find out if ESS/MSS components are already wired and working in this environment?
    Thanks in advance,
    Girish

    Hello Pooja,
    Well, sorry guys, at this place I am the only one trying to explore EP hence nowhere to go for help.
    I tried to call http(s)://<your server>:<port number>/sap/monitoring/ComponentInfo, but getting "Page Load Error..."
    But I am able to run SAP Web GUI with a similar command (see below)....which allows me to run SAP in Web mode....hence thought above URL should also work. I tried with http and https both.
    http://<your server>:<port number>/sap/bc/gui/sap/its/webgui/?sap-system-login-basic_auth=X&sap-client=102&sap-language=EN
    Should I simply try creating a ESS user via SU01, and connect the user to the Employee via IT 1005?
    Will it work (assuming EP components are pre-installed), and if yes, what should I need to run or do to invoke the Portal screen to get the iViews?
    Regards,
    Girish

  • Modify code for MSS/ESS in MySAP ERP 2004

    Hi,
    I have ECC, mySAP ERP 2004, NW 2004 and need to modify standard MSS in compensation management. I imported the MSS sca into the development track but unable to get the code of ecm. Isnt this migrated in NW2004? If not how do I get the par files or source code for editting the ecm of MSS.
    Please help,
    Dhanya

    1 - Is it par files or WD in ERP 2004 for compensation Management ? Can you tell me where can I download the standard par file ?
    In ERP2004, we had par files. You can download the business package from - https://www.sdn.sap.com/irj/sdn/developerareas/contentportfolio. When you unzip the zip file, you can see the par files there.
    2 - whether it is a right approach to download the standard par file, change and export it to reflect the changes liek normal portal projects?
    You shouldn't be changing the standard code. Once changed, support from SAP becomes difficult. But anyways, once changed it can surely be exported like any other object.
    3 - I have new WD ESS and MSS also so can I do a SCA for both the WD components and pars of portal applications into the same SCA? What is the best practise ?
    Ideally, WD applications and Portal Applications should be bundled in different SCA files. The reason being, WD can be stand-alone applications running on J2EE engine (though in your case it is not) but Portal applications are meant to run in the Portal Runtime.
    Regards,
    Sunil

  • MSS ESS document screen shots for ERP2005

    Hi All,
    Does anybody have screen shots for SAP ESS MSS in a word document with content in it apart from the screen shots
    Thanks in Advance!

    Hi Sunny,
    Hope the below link is useful:
    http://itresearch.forbes.com/detail/RES/1126533537_322.html
    http://www.newcastle.gov.uk/DelDec.nsf/by%20date/5DF39F228DE93105802570DC0062F78B/$file/ATT8HMC7.doc
    http://adm.monash.edu/sss/hr/sig/action-notes/30-11-06.doc
    Pls assign points as way yo say thanks

  • Basic manager/employee role with MSS/ESS content

    hey
    which role should I give my manager/employee in the R/3 system so they got the right permission?
    Now I have to add SAP_ALL and SAP_NEW to there profiles or I get error messages saying they don't have the right permission.
    In the portal my manager has rol com.sap.pct.mss.manager
    and my employee has rol com.sap.pct.ess.employee_self_service
    thanks in advance

    hi lien
    u can assign SAP_EMPLOYEE_ERP role to employee which is composite role.
    which contain following role.
    SAP_BC_EMPLOYEE
    SAP_BC_ENDUSER
    SAP_ESSUSER_ERP
    SAP_HR_EMPLOYEE_DE_ERP
    SAP_HR_EMPLOYEE_US_ERP
    SAP_HR_PA_XF_EXPERT
    mainitian the authorization for all role using tcode-pfcg, generate the profiles and completet the user comparisation.
    if u don't have the full authorization for PFCG ask ur basis person to do this.
    (this is usefull to RUN ESS from portal)
    or if u used custom role than
    make sure your user will need authorization object (S_SERVICE)
    add this object in the Role that u used. (PFCG)
    if u have any query revert me back.
    regards,
    kaushal

  • MSS & ESS versions

    Dear SDN,
    Can somebody pls tell me how to check ESS & MSS versions in portal?? My portal is not running so I need to check these versions in Visual Admin...So how to find?
    Pls help.

    go to http://host:port/-----system informationall components---u can find the version there
    reward points if helpful

Maybe you are looking for

  • Tomcat5 still does not start automatically

    Hello, Novell-tomcat5 still does not start automatically at boot although it is set to do so. This is from beginning of the oes2/SBE2.5 installation (without simba). It is still the same behavior after applying OES2/SP2 and SLES10/SP3 patches. After

  • I don't understand iPhoto 9 !

    I thought I'd finally understood iPhoto 9 (https://discussions.apple.com/thread/5175777?start=0&tstart=0). However, after what happened this morning, I'm utterly baffled! 1. I right-clicked an image (one originally imported into an older version of i

  • Viber video message missing in camera roll

    i just noticed that the video messages i received via viber does not play anymore even i saved it into my camera roll. i'm really upset because i thought they are already saved locally on my phone. i keep on getting this message "please see attached"

  • Migration from BO Edge Series to BO enterprise solution

    Hello Everyone, Is there any possibility of migration from BO Edge Series to BO enterprise solution? Will appreciate If you could please help me with some document / details on 1. Quick difference between Edge and Enterprise Series 2. Migration path

  • HT4061 forgot my passcode and cant get into my phone

    I have forgotten my passcode and cannot get into my phone