MSS start process error

Hi Experts,
  I have a problem on our HR portal.
  When I tried to start a process "Organization change/ with supervisor change" in MSS page, there are error messages
  " 500 internal server error" with few special account.
  But if I choose other process, like "Organization change/ without supervisor change" first, and then back to choose
  "Organization change/ with supervisor change" again, the interactive ADOBE form appears.
  I don't why it will failed at the first time processing but it can be done by choosing other process first.
  Does anyone know what's happened?
  Any help will be fully appreciated.
Edited by: Joseph Chen on Dec 29, 2009 3:21 PM

We have the same issue after installing SAP ERP 6.0 Support Stack 15.   Did you ever find out how to resolve the issue?

Similar Messages

  • MSS Start Process iView

    Hi,
        Can we skip the first step "Employee Selection" and move directly to the "Process Selection" in the "Start Process" iview with MSS 1.0.
    If this can be done, Can you please let me know how to skip the Employee selection step.
    Thanks,
    Anand
    Edited by: Kirupanand Venkatapathi on Jun 30, 2009 9:24 AM

    Hi Siddharth,
                       Nice to see your reply, i went to the table V_T5ASRPROCVALID but i haven't seen any of the below process 
    Change Employee Group and Subgroup
    Change Personnel Area and Subarea
    Request for Internal Transfer (Enhanced)
    Request for Promotion
    Request for Internal Transfer
    Request for Separation
    Request for Special Payment
    Request for Transfer
    Change of Working Time
    in that table, i want to remove the above process from MSS Start Process iView and you mention feature for this, if you have any idea about that feature please let me know.
    Really i appreciate.
    Thanks and Regards,
    Abhiram.

  • Create Requisition Request - MSS (Start Process Grey Out-No Data available)

    Hello All
    We are using SRQ2 extended requesition request. Currentlt i am on Devlopment system and just want to see the standard requistion request from MSS so that later i can make a Z copy and customize
    Now when i logged in as a Manager and click on the "Create Requisition Request" from recruiting role it's opening and showing me the Start Process window and everything is non editable and showing me that No Data Avaialble
    Is there any config missing for this
    Also when is see the SRQ2 from SPRO "Define Own Scenarios for Request to Change Master Data" node i made the SRQ2  application as H and aslo tried. But nothing useful.
    Can any one tell me any configuration missing or any other things

    Solved.
    Problem was in MSS the Ehp4 links for erecruiting refers to SRQ3. So i had to pull the iviews from MSS 1.31 BP which will be Webdynpro Java

  • Error in Start Processes iview (MSS 1.0, ECC 6.0)

    Hi all,
    I have configured MSS 1.0 on our portal server.
    I am using Start Processes iview (HCM Forms & Processes). Initially the iview was working fine. However, it has stopped working now suddenly.
    The log file on portal shows the following error.
    com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Creating new Controllers while/after exiting a Component is not allowed.
         at com.sap.tc.webdynpro.progmodel.controller.Component.getCustomControllerInternal(Component.java:441)
         at com.sap.tc.webdynpro.progmodel.controller.Component.getController(Component.java:378)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.getPublicInterface(DelegatingComponent.java:181)
         at <b>com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdGetBackendConnectionsController(InternalFPMComponent.java:209)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.cleanUp(FPMComponent.java:651)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.access$1000(FPMComponent.java:78)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.exitCalled(FPMComponent.java:963)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoExit(FPMComponent.java:208)
         at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoExit(InternalFPMComponent.java:119)</b>     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doExit(DelegatingComponent.java:112)
         at com.sap.tc.webdynpro.progmodel.controller.Component.exitController(Component.java:256)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.exit(Controller.java:154)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.exit(ClientComponent.java:219)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.exit(ClientApplication.java:474)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.destroy(ClientApplication.java:527)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.destroy(ApplicationSession.java:390)
         at com.sap.tc.webdynpro.clientserver.session.ClientWindow.destroyApplicationSession(ClientWindow.java:235)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doDestroyApplication(ClientSession.java:1003)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doSessionManagementPostProcessing(ClientSession.java:789)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:264)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:220)
         at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1246)
         at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:354)
         at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:547)
         at com.sap.portal.pb.PageBuilder.wdDoInit(PageBuilder.java:191)
         at com.sap.portal.pb.wdp.InternalPageBuilder.wdDoInit(InternalPageBuilder.java:150)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:748)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:283)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    And, on the portal the i get 500 Internal Error.
    Please help.
    Will redeploying the application help?
    Or is it some permission/authorization problem.
    Regards,
    Preksha.

    Hi all,
    Finally, the problem is solved. It was to do with JCos.
    Regards,
    Preksha.

  • Adobe HCM Processes and Forms Start processes iView error

    Hi,
    We are implementing Adobe HCM processes. The forms based on the PCR technology are working fine. However, we want the new HCM Processes and Forms technology. We have implemented Business packages for MSS, HR Administrator and XSS (PC_GUI). ADS is configured correctly as the PCR Adobe forms are working fine.
    We want to use the WebDynpro version of HCMPF and NOT the ABAP version. When starting the Start Processes IView (sap.com/paasrprocst) we get the error:
    com.sapportals.portal.prt.runtime.PortalRuntimeException: Failed in WD JNDI lookup. javax.naming.NameNotFoundException: No child found in WebDynproContext with name paasrprocst
    at com.sap.portal.pcm.iview.admin.AdminBaseiView.createAttrSetLayersList(AdminBaseiView.java:361)
        at com.sap.portal.pcm.iview.admin.AdminBaseiView.getAttrSetLayersList(AdminBaseiView.java:205)
        at com.sap.portal.pcm.iview.admin.AdminBaseiView.getCustomImplementation(AdminBaseiView.java:148)
        at com.sap.portal.pcm.admin.PcmAdminBase.getImplementation(PcmAdminBase.java:530)
        at com.sapportals.portal.ivs.iviews.IviewServiceObjectFactory.getObjectInstance(IviewServiceObjectFactory.java:448)
        ... 40 more
    See full exception chain for details.
    System Environment
    Client
    Web Dynpro Client Type HTML Client
    User agent Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; InfoPath.1; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 1.1.4322; .NET CLR 3.0.04506.648)
    Version null
    DOM version null
    Client Type msie6
    Client Type Profile ie6
    ActiveX enabled
    Cookies enabled
    Frames enabled
    Java Applets enabled
    JavaScript enabled
    Tables enabled
    VB Script enabled
    Server
    Web Dynpro Runtime Vendor: SAP, build ID: 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:13:14[UTC], changelist=455669, host=pwdfm101), build date: Sat Jan 19 11:19:58 AST 2008
    J2EE Engine 7.00 patchlevel 109044.44
    Java VM Java HotSpot(TM) 64-Bit Server VM, version:1.4.2_12-b03, vendor: Sun Microsystems Inc.
    Operating system SunOS, version: 5.10, architecture: sparcv9
    Session & Other
    Session Locale en
    Time of Failure Thu Mar 13 13:07:45 AST 2008 (Java Time: 1205402865554)
    Web Dynpro Code Generation Infos
    sap.com/pb
    SapDictionaryGenerationCore 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:57:42[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
    SapDictionaryGenerationTemplates 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:57:50[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
    SapGenerationFrameworkCore 7.0013.20060719095755.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:44:42[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
    SapIdeWebDynproCheckLayer 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:04:26[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCommon 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:45:30[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCore 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:45:23[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
    SapMetamodelDictionary 7.0013.20060719095619.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:54:53[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
    SapMetamodelWebDynpro 7.0013.20070703112649.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:00:50[UTC], changelist=454024, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationCTemplates 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:15:27[UTC], changelist=455669, host=pwdfm101)
    SapWebDynproGenerationCore 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:04:37[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationTemplates 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:15:27[UTC], changelist=455669, host=pwdfm101)
    sap.com/tcwddispwda
    No information available null
    sap.com/pb_api
    SapDictionaryGenerationCore 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:57:42[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
    SapDictionaryGenerationTemplates 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:57:50[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
    SapGenerationFrameworkCore 7.0013.20060719095755.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:44:42[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
    SapIdeWebDynproCheckLayer 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:04:26[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCommon 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:45:30[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCore 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:45:23[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
    SapMetamodelDictionary 7.0013.20060719095619.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:54:53[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
    SapMetamodelWebDynpro 7.0013.20070703112649.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:00:50[UTC], changelist=454024, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationCTemplates 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:15:27[UTC], changelist=455669, host=pwdfm101)
    SapWebDynproGenerationCore 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:04:37[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationTemplates 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:15:27[UTC], changelist=455669, host=pwdfm101)
    sap.com/tcwdcorecomp
    No information available null
    Detailed Error Information
    Detailed Exception Chain
    com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to load page
         at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:527)
         at com.sap.portal.pb.PageBuilder.wdDoInit(PageBuilder.java:191)
         at com.sap.portal.pb.wdp.InternalPageBuilder.wdDoInit(InternalPageBuilder.java:150)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:748)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:283)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: javax.naming.NamingException: Failed in WD JNDI lookup. javax.naming.NameNotFoundException: No child found in WebDynproContext with name paasrprocst [Root exception is com.sapportals.portal.prt.runtime.PortalRuntimeException: Failed in WD JNDI lookup. javax.naming.NameNotFoundException: No child found in WebDynproContext with name paasrprocst]
         at com.sapportals.portal.pcd.gl.JndiProxy.getObjectInstance(JndiProxy.java:51)
         at com.sapportals.portal.pcd.gl.PcdGlContext.getSemanticObject(PcdGlContext.java:919)
         at com.sapportals.portal.pcd.gl.PcdGlContext.getSemanticObject(PcdGlContext.java:692)
         at com.sapportals.portal.pcd.gl.PcdGlContext.lookup(PcdGlContext.java:69)
         at com.sapportals.portal.pcd.gl.PcdURLContext.lookup(PcdURLContext.java:238)
         at javax.naming.InitialContext.lookup(InitialContext.java:347)
         at com.sap.portal.pb.data.PcdManager.doInit(PcdManager.java:72)
         at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:525)
         ... 31 more
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: Failed in WD JNDI lookup. javax.naming.NameNotFoundException: No child found in WebDynproContext with name paasrprocst
         at com.sap.portal.pcm.iview.admin.AdminBaseiView.createAttrSetLayersList(AdminBaseiView.java:361)
         at com.sap.portal.pcm.iview.admin.AdminBaseiView.getAttrSetLayersList(AdminBaseiView.java:205)
         at com.sap.portal.pcm.iview.admin.AdminBaseiView.getCustomImplementation(AdminBaseiView.java:148)
         at com.sap.portal.pcm.admin.PcmAdminBase.getImplementation(PcmAdminBase.java:530)
         at com.sapportals.portal.ivs.iviews.IviewServiceObjectFactory.getObjectInstance(IviewServiceObjectFactory.java:448)
         at com.sapportals.portal.prt.jndisupport.DirectoryManager.getObjectInstance(DirectoryManager.java:56)
         at com.sapportals.portal.pcd.gl.JndiProxy.getObjectInstance(JndiProxy.java:47)
         ... 38 more
    Can anyone tell me more about the cause this might have? Also, are there any further prerequisites for this iView to work?
    Any help will be appreciated and rewarded accordingly.
    Regards,
    Thomas

    hello,
    how did you solve it ?
    Regards,
    Dimitry Haritonov

  • Error in MSS HCM Processes and Forms Overview

    Hi all,
    Currently we are working on ESS/MSS from NW 7.3 portal.
    When i open HCM Processes and Forms Overview from MSS, it prompt me to change the password again and again.
    And on some user HCM Processes and Forms Overview not shown properly.
    Error while processing your query
    What has happened?
    The URL call http://<host name>:1080/sap/bc/webdynpro/sap/asr_pa_pd_processes_display was terminated because of an error.
    Note
    The following error occurred in system BEQ : Parameter has invalid value: Parameter TSTMP1 has invalid value 0 .
    The error occurred on application server MUMSAP02_BEQ_00 and in work process 8 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: SUBTRACT of program CL_ABAP_TSTMP=================CP
    Method: SUBTRACT_TIMESTAMPS of program CL_HRASR00_PROCESS_UTILITIES==CP
    Method: GET_CURRENT_TIME_DATA of program CL_HRASR00_PROCESS_UTILITIES==CP
    Method: START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: IF_COMPONENTCONTROLLER~START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_IF_VIEW=====CP
    Method: DISPLAY_TOPLEVEL_COMPONENT of program CL_WDR_CLIENT_COMPONENT=======CP
    What can I do?
    If the termination type is RABAX_STATE, you will find more information on the cause of termination in system BEQ in transaction ST22.
    If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server MUMSAP02_BEQ_00 in transaction SM21.
    If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process 8 in transaction ST11 on the application server. MUMSAP02_BEQ_00 . You may also need to analyze the trace files of other work processes.
    If you do not yet have a user ID, contact your system adminmistrator.
    Error Code: ICF-IE-http -c: 350 -u: ISHAJI -l: E -s: BEQ -i: MUMSAP02_BEQ_00 -w: 8 -d: 20130514 -t: 133514 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION -X: D4AE5218F8121ED2AF8DA00F61FBEAC0_D4AE5218F8121ED2AF8DA00F5D19EAC0_1 -x: 006DBCE20F7BF1E58AC0D4AE5218F812
    HTTP 500 - Internal Server Error
    Your SAP Internet Communication Framework Team
    Please suggest me the solution.
    Regards,
    Devendra

    Dear Andrea,
    I reset the password of backend user and gave sap_all and sap_new role.
    Last time it prompt the screen in mss as to change the password. (See above screen shot).
    But after reset the password...error showing instead of login screen in mss as below:
    Error while processing your query
    What has happened?
    The URL call http://<host name>:1080/sap/bc/webdynpro/sap/asr_pa_pd_processes_display was terminated because of an error.
    Note
    The following error occurred in system BEQ : Parameter has invalid value: Parameter TSTMP1 has invalid value 0 .  
    The error occurred on application server MUMSAP02_BEQ_00 and in work process 7 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: SUBTRACT of program CL_ABAP_TSTMP=================CP
    Method: SUBTRACT_TIMESTAMPS of program CL_HRASR00_PROCESS_UTILITIES==CP
    Method: GET_CURRENT_TIME_DATA of program CL_HRASR00_PROCESS_UTILITIES==CP
    Method: START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: IF_COMPONENTCONTROLLER~START_TRACKING of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: HANDLEDEFAULT of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/LA89BHH7CSECCUXGQD7Z==CP
    Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_IF_VIEW=====CP
    Method: DISPLAY_TOPLEVEL_COMPONENT of program CL_WDR_CLIENT_COMPONENT=======CP
       What can I do?
    If the termination type is RABAX_STATE, you will find more information on the cause of termination in system BEQ in transaction ST22.
    If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server MUMSAP02_BEQ_00 in transaction SM21.
    If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process 7 in transaction ST11 on the application server. MUMSAP02_BEQ_00 . You may also need to analyze the trace files of other work processes.
    If you do not yet have a user ID, contact your system adminmistrator.
    Error Code: ICF-IE-http -c: 350 -u: IKHASU -l: E -s: BEQ -i: MUMSAP02_BEQ_00 -w: 7 -d: 20130514 -t: 175940 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION -X: D4AE5218F8121ED2AF923E065A39EAC0_D4AE5218F8121ED2AF923E394271EAC0_1 -x: F091BCE2D132F1D58AC0D4AE5218F812
    HTTP 500 - Internal Server Error
    Your SAP Internet Communication Framework Team
    I checked log in ST22 as below
    What happened?
        The exception 'CX_PARAMETER_INVALID_RANGE' was raised, but it was not caught
         anywhere along
        the call hierarchy.
        Since exceptions represent error situations and this error was not
        adequately responded to, the running ABAP program
         'CL_ABAP_TSTMP=================CP' has to be
        terminated.
    Error analysis
        An exception occurred that is explained in detail below.
        The exception, which is assigned to class 'CX_PARAMETER_INVALID_RANGE', was not
         caught in
        procedure "SUBTRACT_TIMESTAMPS" "(METHOD)", nor was it propagated by a RAISING
         clause.
        Since the caller of the procedure could not have anticipated that the
        exception would occur, the current program is terminated.
        The reason for the exception is:
        Parameter has invalid value: Parameter TSTMP1 has invalid value 0.
    Regards,
    Devendra

  • Error--Timed out trying to start process J000.

    Hi all,
    I have a Oracle 9.2 on sun box with 2 node rac. i am getting an erorr in alert log file i.e
    Timed out trying to start process J001.
    Tue Feb 17 13:27:30 2009
    Timed out trying to start process J000.
    Tue Feb 17 13:29:39 2009
    Timed out trying to start process J001.
    Tue Feb 17 13:41:23 2009
    Timed out trying to start process J001.
    Tue Feb 17 13:43:32 2009
    Timed out trying to start process J000.
    Tue Feb 17 13:49:42 2009
    Tue Feb 17 13:49:44 2009
    Trace dumping is performing id=[cdmp_20090217134944]
    Tue Feb 17 13:54:17 2009
    Timed out trying to start process J000.
    Tue Feb 17 13:56:20 2009
    Timed out trying to start process J000.
    Tue Feb 17 13:58:28 2009
    Timed out trying to start process J000.can anybbody suggest me for the same why i am getting this error and what should be the solution....

    JOB     WHAT                                                                                         FAILURES
    1     db_space_hist_proc;                                                                           0
    22     P_S_EC_GENERATION(sysdate);                                                           0
    4     CREATE INDEX DATA3.IDX_PED_PH_CODE
    ON CADATA3.OT_PENDENCY_DETL(PED_COMP_CODE, PED_PH_SYS_ID, PED_PD_CODE, PED_TXN_CODE)
                                                                                                              16
    5     CREATE INDEX DATA3.IDX_PED_PH_CODE
    ON DATA3.OT_PENDENCY_DETL(PED_COMP_CODE, PED_PH_SYS_ID, PED_PD_CODE, PED_TXN_CODE);
                                                                                                                           16
    99     insert_photo_link;                                                                             0could this be the problem here we can see that jo no. 4 and 5 have failed more than 16.......
    Edited by: user00726 on Feb 16, 2009 11:17 PM

  • Error Start Process Scheduler after configure Crystal Path

    Hi All,
    Kindly help me to solve this issue. I'd installed Peoplesoft HCM 9.2, Application Server and Process Scheduler run sucessfull but after i install Crystal Report Runtime Redistribute 2008 and configure crystal path (C:\Program Files(x86)\Business Objects\BusinessObjects Enterprise 12.0\win32_x86) i got this error when i try to start process scheduler
    Booting admin processes ...
    exec BBL -A :
      process id=3164 ... started
    1 process started
    Attaching to active bulletin board.
    > Attempting to boot ...
    INFO: Oracle Tuxedo, Version 11.1.1.2.0 with VS2010, 64-bit, Patch Level (none)
    Booting server processes ...
    exec PSMSTPRC -0 ".\LOGS\stdout" -e ".\LOGS\stderr" -A -- -CD ORCL -PS PSNT -A start -S PSMSTPRC :
      CMDTUX_CAT:1685: ERROR: Application initialization failure
      CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
    tmshutdown -qy

    Hi all,
    I am getting a similar message ...
    failure: CORE3170: Configuration initialization failed: Error running init function load-modules: dlopen of /opt/SUNWwbsvr/plugins/passthrough/libpassthrough.so failed (ld.so.1: webservd: fatal: /opt/SUNWwbsvr/plugins/passthrough/libpassthrough.so: wrong ELF class: ELFCLASS64)
    +/usr/bin/isainfo -kv+ gives *64-bit sparcv9 kernel modules*
    I have also added the path of libpassthrough.so in LD_LIBRARY_PATH .
    What can be the reason now ?
    I had downloaded SP4. Does my webserver(sunone 6.1) also needs an update of service pack 4 then ? (It was installed about 2 months ago).

  • Start-Process : This command cannot be run due to the error: The system cannot find the file specified.

    Hi, 
    I need some help with my script. It copies the file to the remote laptops but when it needs to install the .exe it fails.
    If I run 1 line at the time in Powershell ISE, then it works. Somebody has an idea why it doesn't work or can help me on the right way?
    Script: 
    $laptops = Get-Content -Path "C:\Users\bruyld01\Documents\STEPSTONE\Powershell\SAP\LaptopList.txt"
    foreach ($laptop in $laptops)
        Copy-Item "C:\Users\bruyld01\Desktop\SAP_Business_ByDesign_Add-In_for_Microsoft_Outlook_V5.exe" -Destination \\$laptop\C$\
        Enter-PSSession $laptop
        $version = Get-WmiObject -Class Win32_Product | where {$_.Name -like "*SAP Business*"} | Select-Object Version
        if ($version -ne "135.0.2071.1047")
            Start-Process -Filepath "C:\SAP_Business_ByDesign_Add-In_for_Microsoft_Outlook_V5.exe" -ArgumentList "/quiet"
        else
            Write-Host "SAP outlook add-in is up to date!" -ForegroundColor Green
        Exit-PSSession
    Error message:
    Start-Process : This command cannot be run due to the error: The system cannot find the file specified.
    At line:2 char:1
    + Start-Process -Filepath "C:\SAP_Business_ByDesign_Add-In_for_Microsoft_Outlook_V ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : InvalidOperation: (:) [Start-Process], InvalidOperationException
        + FullyQualifiedErrorId : InvalidOperationException,Microsoft.PowerShell.Commands.StartProcessCommand
    Thanks, 
    Dimitri

    Hi,
    Enter-PSSession is used for interactive remote sessions. Look into Invoke-Command instead.
    http://ss64.com/ps/invoke-command.html
    Don't retire TechNet! -
    (Don't give up yet - 13,085+ strong and growing)

  • Error occured when starting process chain

    When we want to start a process chain via SAP_BW_ProcessChainRun we get the following error log:
    Failed to start process chain /NSN/C_DSP_TR_GLOBAL_II. No logid was returned by the BW-SCH API.
    com.redwood.scheduler.connector.sap.rfc.connection.exception.SapBapiException: BAPI exception while calling RSPC_API_CHAIN_START: E RSPC 022 Processes with Error
    BAPI exception while calling RSPC_API_CHAIN_START: E RSPC 022 Processes with Error
         at com.redwood.scheduler.connector.sap.rfc.jco2.connection.impl.ClientConnectionImpl.checkBapiReturnCode(ClientConnectionImpl.java:789)
         at com.redwood.scheduler.connector.sap.rfc.jco2.connection.impl.ClientConnectionImpl.handleRscpApiErrors(ClientConnectionImpl.java:808)
         at com.redwood.scheduler.connector.sap.rfc.jco2.connection.impl.ClientConnectionImpl.call(ClientConnectionImpl.java:505)
         at com.redwood.scheduler.connector.sap.rfc.connection.AbstractRfcConnection$4.doPerform(AbstractRfcConnection.java:296)
         at com.redwood.scheduler.connector.sap.rfc.connection.RemoteFunctionCall.perform(RemoteFunctionCall.java:120)
         at com.redwood.scheduler.connector.sap.rfc.connection.AbstractRfcConnection.perform(AbstractRfcConnection.java:461)
         at com.redwood.scheduler.connector.sap.rfc.connection.AbstractRfcConnection.execute(AbstractRfcConnection.java:289)
         at com.redwood.scheduler.connector.sap.rfc.jco2.connection.impl.SapFunctionModuleWrapper.execute(SapFunctionModuleWrapper.java:200)
         at com.redwood.scheduler.connector.sap.rfc.jco.AbstractSapFunctionModule.execute(AbstractSapFunctionModule.java:109)
         at com.redwood.scheduler.connector.sap.rfc.command.impl.BwProcessChainCommand.execute(BwProcessChainCommand.java:98)
         at com.redwood.scheduler.connector.sap.rfc.command.AbstractXbpCommand.doExecute(AbstractXbpCommand.java:86)
         at com.redwood.scheduler.connector.sap.rfc.command.AbstractCommand.execute(AbstractCommand.java:56)
         at com.redwood.scheduler.connector.sap.rfc.service.operation.RunJobOperation.doWork(RunJobOperation.java:103)
         at com.redwood.scheduler.connector.sap.rfc.service.SapJobWork.doWork(SapJobWork.java:38)
         at com.redwood.scheduler.infrastructure.workqueue.Worker.run(Worker.java:74)
         at java.lang.Thread.run(Thread.java:579)
    What could be the reason?
    Thanks
    Br
    Günter

    O.K. I can answer the question by myself: Is an authorisation issue. The rfc user who starts the PCs didn't have enough rights.
    Br
    Günter

  • Cache issue coming in Start Process for Employee iView under MSS

    Hi,
    Navigate to MSS -> Team -> HCM Process and Forms -> Start Process for Employee
    In Start Process for Employee iView, when I clicks on Refresh link at the bottom right of the table the Direct Reports got removed from the table (which is correct) but when I navigates to some other screen and comes back then again the previous data comes back. It seems to be cache level issue. Even I logs off and login the same data comes back which should not happen.
    I have checked the forum [Team=>Personnel Developent=>Employee Search; and found it that Refesh property will work if I set the parameter of iview Cache Lifetime = -1 then it will disable the caching at all.
    And I wants the same behaviour for Start Process for Employee iView. But I am not able to find the similar property in Start Process for Employee iView.
    Anyone have an idea of What is the resolution for this issue?
    Regards,
    Deep

    Hi Deep,
    now I understand your problem )
    To me it sounds like an OADP cache issue rather than one in Portal. The iview uses OADP which again uses the cache which does not reflect on the actual current org-structure.
    One possibility would be enhancing the WD4A and call FMs
    HRWPC_OADP_DELETE_TGTOBJCACHE
    HRWPC_OADP_DELETE_SRCHOBJCACHE
    HRWPC_OADP_DELETE_NAVOBJCACHE
    HRWPC_OADP_DELETE_DATAVWCACHE
    dependent on what you want to delete to refresh.
    I would probably try to enhance HookMethod WDDOINIT in Component Controller and call them there, but that's just a guess; could be complete nonesense.
    Another possibility would be trying to add the application parameter "sap.xss.req.crt.cachelifetime=0" to the iView.
    Links for reference:
    http://help.sap.com/saphelp_ppm50/helpdata/en/21/1ac5ca5cad46528d4f970cc03b8e8f/content.htm
    Web dynpro abap and OADP cache
    http://help.sap.com/saphelp_dimp50/helpdata/DE/97/7f754067025537e10000000a1550b0/content.htm
    hope this helps a bit now
    regards, Lukas

  • Error trap with Start-Process

    I am trying to use Start-Process to drive Regedit merging a REG file with this code.
    Start-Process regedit -Argumentlist:"/S $TempReg" -Wait -ErrorAction:Stop
    When the REG file is properly formatted this works a treat, but I can't seem to address the error condition. If I do a Try/Catch it seems to produce a successful Try. I tried doing it with a return code as well, and that didn't seem to see the error either.
    Am I doing something wrong in the code, or is Regedit a special case, and if so, can I catch errors from it at all?
    Thanks!
    Gordon

    Hmm, I assume you mean Regedit can't be used "with an error trap"? So, perhaps a different form of the question. First thing to note is that I have tried to address this with direct PowerShell access to the registry, and for some reason Autodesk
    products don't respond well to that approach. Everything looks right when I do it, but then the Autodesk product will push it's own settings over the top, and their settings are idiotic. However, when I push my settings via REG file the Autodesk products accept
    it and move on.
    So, does anyone have a suggestion for either
    A: Identifying exactly what the difference is between the .REG and Set-ItemProperty approaches, so the more elegant solution can be made to also work? Or
    B: Another approach to REG file merge that does allow for error trapping?
    My only other option I think is to implement it without error trapping, as the functionality is pretty important, and the most likely errors will show up in testing not production anyway.
    Thanks!
    Gordon

  • How to pass Employee number of MSS - Employee Search to Start Process

    Hi All,
    Just like HR admin role, Employee Information number is getting passed in Display Processes, Start Processes, and Personnel File, we have to make same scenario working for MSS also.
    In MSS, General Information Page, when manager selects the Employee, then that Employee Number should get passed in Display Personnel File and also in Start Process.
    I am new to HR module so I have not explined the requirement properlly, but Experts may be knowing this. Please help.
    Regards,
    Nikesh

    Hi Siddharth Rajora,
    I have actually 2 doubts..
    1. You mean to say this can be done and is already implemented, but I think it will only work if we put "Display Personnel File and Start Process" under "Related Activities" area right ?
    2. But user wants these views in the Detailed Navigation, so if he selects PERNER from general Information Page, and then if he clicks on "Start Process (under Detailed Navigation)" , then it shud show list of processes for that Employee.
    Can you please guide me properly.

  • How to pass Employee number of MSS - General Information to Start Process.

    Hi All,
    Just like HR admin role, Employee Information number is getting passed in Display Processes, Start Processes, and Personnel File, we have to make same scenario working for MSS also.
    In MSS, General Information Page, when manager selects the Employee, then that Employee Number should get passed in Display Personnel File and also in Start Process.
    I am new to HR module so I have not explined the requirement properlly, but Experts may be knowing this. Please help.
    Regards,
    Nikesh

    Hi Siddharth Rajora,
    I have actually 2 doubts..
    1. You mean to say this can be done and is already implemented, but I think it will only work if we put "Display Personnel File and Start Process" under "Related Activities" area right ?
    2. But user wants these views in the Detailed Navigation, so if he selects PERNER from general Information Page, and then if he clicks on "Start Process (under Detailed Navigation)" , then it shud show list of processes for that Employee.
    Can you please guide me properly.

  • ORABPEL START-UP ERROR!!!!!!!! - Connection Pool Deployment failure

    I have installed BPEL Process Manager with Weblogic 8.1SP4.
    I am using Oracle Database 9.2.0.5.0 for Oracle BPEL Process
    Manager installation.
    Also i have made following changes for JDBC thin driver accordingly.
    <JDBCConnectionPool CapacityIncrement="2"
    DriverName="oracle.jdbc.OracleDriver"
    MaxCapacity="15" LoginDelaySeconds="1"
    Name="BPELServerPool"
    ShrinkPeriodMinutes="15"
    ShrinkingEnabled="true" SupportsLocalTransaction="true"
    Targets="orabpelServer"
    URL="jdbc:oracle:thin:orabpel/orabpel_password@hostname:port:database_servoce_
    name"/>
    I m getting following error while starting the server :-
    Connection Pool "BPELServerPool" deployment failed with the following error: 0:Could not create pool connection. The DBMS driver exception was: invalid arguments in call.
    Also I m getting following error during startup
    ORABPEL-04076
    Cannot lookup jdbc datasource.
    The process domain was unable to lookup the TX datasource "BPELServerDataSourceWorkflow".
    Please check that the machine hosting the datasource is physically connected to the network. Additionally check that the connection pool properties as defined in the application server startup properties are valid.
    at com.collaxa.cube.engine.data.ConnectionFactory$ConnectionFactoryImpl.init(ConnectionFactory.java:268)
    at com.collaxa.cube.engine.data.ConnectionFactory.update(ConnectionFactory.java:54)
    at com.collaxa.cube.engine.data.ConnectionFactory.init(ConnectionFactory.java:42)
    at com.collaxa.cube.admin.data.ServerConnectionFactory.init(ServerConnectionFactory.java:34)
    at com.collaxa.cube.admin.adaptors.ServerAdaptorManager.init(ServerAdaptorManager.java:66)
    at com.collaxa.cube.admin.ServerManager.__init(ServerManager.java:211)
    at com.collaxa.cube.admin.ServerManager.init(ServerManager.java:99)
    at com.collaxa.cube.ejb.impl.ServerBean.init(ServerBean.java:200)
    at com.collaxa.cube.ejb.impl.ServerBean_g9inc6_EOImpl.init(ServerBean_g9inc6_EOImpl.java:856)
    at com.collaxa.cube.admin.CXLoaderServlet.init(CXLoaderServlet.java:62)
    at javax.servlet.GenericServlet.init(GenericServlet.java:258)
    at weblogic.servlet.internal.ServletStubImpl$ServletInitAction.run(ServletStubImpl.java:1028)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
    at weblogic.servlet.internal.ServletStubImpl.createServlet(ServletStubImpl.java:904)
    at weblogic.servlet.internal.ServletStubImpl.createInstances(ServletStubImpl.java:883)
    at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:822)
    at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:3333)
    at weblogic.servlet.internal.WebAppServletContext.preloadServlets(WebAppServletContext.java:3278)
    at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:3259)
    at weblogic.servlet.internal.WebAppServletContext.setStarted(WebAppServletContext.java:5949)
    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:862)
    at weblogic.j2ee.J2EEApplicationContainer.start(J2EEApplicationContainer.java:2127)
    at weblogic.j2ee.J2EEApplicationContainer.activate(J2EEApplicationContainer.java:2168)
    at weblogic.j2ee.J2EEApplicationContainer.activate(J2EEApplicationContainer.java:2115)
    at weblogic.management.deploy.slave.SlaveDeployer$Application.setActivation(SlaveDeployer.java:3082)
    at weblogic.management.deploy.slave.SlaveDeployer.setActivationStateForAllApplications(SlaveDeployer.java:1751)
    at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:359)
    at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(DeploymentManagerServerLifeCycleImpl.java:229)
    at weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:131)
    at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:966)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:361)
    at weblogic.Server.main(Server.java:32)
    <Error> <HTTP> <BEA-101216> <Servlet: "cxloader" failed to preload on startup in Web application: "startup".
    javax.servlet.ServletException:
    ORABPEL START-UP ERROR!!!!!!!!
    Can Anyone kindly suggest what is the problem ?

    I have installed BPEL Process Manager with Weblogic 8.1SP4.
    I am using Oracle Database 9.2.0.5.0 for Oracle BPEL Process
    Manager installation.
    Also i have made following changes for JDBC thin driver accordingly.
    <JDBCConnectionPool CapacityIncrement="2"
    DriverName="oracle.jdbc.OracleDriver"
    MaxCapacity="15" LoginDelaySeconds="1"
    Name="BPELServerPool"
    ShrinkPeriodMinutes="15"
    ShrinkingEnabled="true" SupportsLocalTransaction="true"
    Targets="orabpelServer"
    URL="jdbc:oracle:thin:orabpel/orabpel_password@hostname:port:database_servoce_
    name"/>
    I m getting following error while starting the server :-
    Connection Pool "BPELServerPool" deployment failed with the following error: 0:Could not create pool connection. The DBMS driver exception was: invalid arguments in call.
    Also I m getting following error during startup
    ORABPEL-04076
    Cannot lookup jdbc datasource.
    The process domain was unable to lookup the TX datasource "BPELServerDataSourceWorkflow".
    Please check that the machine hosting the datasource is physically connected to the network. Additionally check that the connection pool properties as defined in the application server startup properties are valid.
    at com.collaxa.cube.engine.data.ConnectionFactory$ConnectionFactoryImpl.init(ConnectionFactory.java:268)
    at com.collaxa.cube.engine.data.ConnectionFactory.update(ConnectionFactory.java:54)
    at com.collaxa.cube.engine.data.ConnectionFactory.init(ConnectionFactory.java:42)
    at com.collaxa.cube.admin.data.ServerConnectionFactory.init(ServerConnectionFactory.java:34)
    at com.collaxa.cube.admin.adaptors.ServerAdaptorManager.init(ServerAdaptorManager.java:66)
    at com.collaxa.cube.admin.ServerManager.__init(ServerManager.java:211)
    at com.collaxa.cube.admin.ServerManager.init(ServerManager.java:99)
    at com.collaxa.cube.ejb.impl.ServerBean.init(ServerBean.java:200)
    at com.collaxa.cube.ejb.impl.ServerBean_g9inc6_EOImpl.init(ServerBean_g9inc6_EOImpl.java:856)
    at com.collaxa.cube.admin.CXLoaderServlet.init(CXLoaderServlet.java:62)
    at javax.servlet.GenericServlet.init(GenericServlet.java:258)
    at weblogic.servlet.internal.ServletStubImpl$ServletInitAction.run(ServletStubImpl.java:1028)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
    at weblogic.servlet.internal.ServletStubImpl.createServlet(ServletStubImpl.java:904)
    at weblogic.servlet.internal.ServletStubImpl.createInstances(ServletStubImpl.java:883)
    at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:822)
    at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:3333)
    at weblogic.servlet.internal.WebAppServletContext.preloadServlets(WebAppServletContext.java:3278)
    at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:3259)
    at weblogic.servlet.internal.WebAppServletContext.setStarted(WebAppServletContext.java:5949)
    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:862)
    at weblogic.j2ee.J2EEApplicationContainer.start(J2EEApplicationContainer.java:2127)
    at weblogic.j2ee.J2EEApplicationContainer.activate(J2EEApplicationContainer.java:2168)
    at weblogic.j2ee.J2EEApplicationContainer.activate(J2EEApplicationContainer.java:2115)
    at weblogic.management.deploy.slave.SlaveDeployer$Application.setActivation(SlaveDeployer.java:3082)
    at weblogic.management.deploy.slave.SlaveDeployer.setActivationStateForAllApplications(SlaveDeployer.java:1751)
    at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:359)
    at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(DeploymentManagerServerLifeCycleImpl.java:229)
    at weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:131)
    at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:966)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:361)
    at weblogic.Server.main(Server.java:32)
    <Error> <HTTP> <BEA-101216> <Servlet: "cxloader" failed to preload on startup in Web application: "startup".
    javax.servlet.ServletException:
    ORABPEL START-UP ERROR!!!!!!!!
    Can Anyone kindly suggest what is the problem ?

Maybe you are looking for

  • Error While saving a iBot

    Hi All , I am getting the below error while saving a iBot. Oracle BI Scheduler Error: [nQSError: 16001] ODBC error state: S1C00 code: 106 message: [Microsoft][ODBC Excel Driver]Optional feature not implemented . at stage of execute transaction comman

  • Trying to dl icloud but it wont accept my apple id...help!

    i get an error saying.... an AppleID that is an email address is required to use icloud.  However my Apple ID works for all my stuff, why is it not working here?

  • Doubts in System Landscape Directory

    Hello All, I got some basic doubts in SLD. Why do we need to store the information about the installed products and to be installed products in software catalog? And, what is this techncal system? After reading few help sites, what I understand is th

  • Add user in Contribute CS3

    I am the administrator of a site and want to add a new user to a role. In CS3 the add a user button is no longer there, just the send a connection key button. That allows me to send the key to someone, but not set up their user name. How do I do that

  • Spotlight's mdworker not indexing certain files

    Hi! I've got a few files that doesn't seem to get indexed by spotlight or spotlight simply doesn't want to include it when searching, I just rebuilt spotlight's database with no effect. I've looked around a little but can't really find anything that