MSVCP11O.dll missing from my computer after updates

Good Morning, I have recently been in touch with you in regards to a problem I am having with my computer after updating apps on the 19/03/2014.  My computer keeps saying that launching 64 - Bit versions of some Adobe products such as photoshop, bridge shows an error message stating that msvcpllo.dll file is missing.   This error appears after I updated the Creative Cloud desktop app to version 1.5 released 19/3/2014
The I get the message The probem was caused because the VC redistributable files are not installed properly. Then it goes on to saying how to do this but I am having trouble cause it makes no sense to me, could you please make this easy for me so I can install the necessary file so I can get back to my assignments which are due.
Please help Kaz
I have pressed the installation app and it only goes to 35% and stops

Hi Creative Designs,
Please refer the article: http://helpx.adobe.com/creative-cloud/kb/missing-msvcp110dll.html.
Regards,
Romit Sinha

Similar Messages

  • Camera roll missing from iphone 4S after update to iOS 8

    camera roll missing from iphone 4S after update to iOS 8

    Hi,
    It's normal, it's replaced with another folder.
    and now you can recuperate your deleted pictures from a folder or after 30 days they will be deleted.

  • Itunes wont open get this msg. program can't open MSVCR80.dll missing from your computer

    itunes wont open getting this msg. program can't open MSVCR80.dll is missing from your computer I got this after insatlling a update.

    Hi there Tberg01,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    -Griff W.

  • TS5376 For "The program can't start because MSVCR80.dll is missing from your computer", I followed the steps and there is no C:\Program Files\iTunes and look for .dll files..Also, after the update, I no longer show my disk drive when I load a CD.

    After downloading the new Itunes update, my compter now shows error: "The program can't start because MSVCR80.dll is missing from your computer". I follwed the Apple fix / steps but it did not correct it. Also, after the update my disk drive is not recognized on my computer. If I load a CD, I cannot even access it.

    See also Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes (similar to the advice above) and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies. E.g. TS2308: iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • TS1717 Started a software update this morning which didn't work.  Now Itunes will not open at all.  I get the following message."The program can't state becasue MSVCR80.dll is missing from your computer."

    Started a Itunes software update this morning which didn't work.  Now Itunes will not open at all.  I get the following message."The program can't state becasue MSVCR80.dll is missing from your computer."

    There are a couple of options that I know of to fix the issue.
    One is listed in this thread - https://discussions.apple.com/message/24606478#24606478 - and involves uninstalling iTunes and related components and then re-installing iTunes.  You will need to read the instructions in the thread to see the correct uninstall order.
    Second option is use System Restore to set your system back to a date prior to the iTunes update.  I did this before finding the thread mentioned above.
    Not sure exactly what the problem is but I know, after a search, that MSVCR80.dll was indeed already installed on my computer. 
    Message was edited by: karivers

  • HT201210 After downloading latest version of iTunes it will not open.  This error message is displayed;  The program can't star because MSVCR80.dll is missing from your computer.  Try reinstalling the program to fix this problem.  Then a second error box

    After iTunes requested that I download latest version on PC it now will not open.  2 error messages appear.  first:  The program can't start because MSVCR80.dll is missing from your computer.  Try reinstalling the program to fix this problem.  second:  iTunes was not installed correctly please reinstall iTunes. Error 7 (Windows error 126).  I have tried reinstalling a number of times and restarting computer but no luck.

    This happened to me today as well post installing the latest version of itunes.   I did a search on google for the error and came across a recommendation to :
    Note: Start Windows in Safe Mode to complete any of the following steps if you're unable to access Windows normally due to the msvcr80.dll error.
    If, and only if, you're receiving the msvcr80.dll is missing error when you open Apple iTunes, do the following: (skip this step if your msvcr80.dll error is occurring with a different program)
    Uninstall from Windows the following five programs in this order: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, and finally Apple Application Support. If you have iCloud, remove it as well.
    Uninstalling these programs in Windows is done from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
    Note: Songs and playlists in iTunes will not be removed when you uninstall the iTunes program or any of the other, already-mentioned Apple programs. If you'd still like to back them up, they're usually located in the My Music folder in Windows.
    Download the latest version of iTunes from Appleand note the location you're saving it to so you can find it once it's done.
    Run the iTunes installation as an administrator. If you're not sure how to do that, see How Do I Open an Elevated Command Prompt? for help. That procedure shows you how to open the Command Prompt program as an administrator, but the steps are essentially the same for anything, including the iTunes installation package you just downloaded.
    A general overview of removing and reinstalling iTunes can also be found here on Apple's site but the above procedure seems to work better in this particular situation.

  • Hi, I updated my version of iTunes and now get the error "The program can't start because MSVCR80.dll is missing from your computer".

    Hi, I hope some one can help as I updated my version of iTunes and now get the error "The program can't start because MSVCR80.dll is missing from your computer". I understand that I need to delete and reinstall iTunes but all of my music has been uploaded from CD's and I'd like to know if these are safe if I delete iTunes of if they too will be deleted. I have over 1300 songs so this is a big question for me.  Many thanks.

    Under normal circumstances, an uninstall/reinstall doesn't touch your content. (That being said, it's still always a good idea to maintain a current backup at all times in case of disasters of any sort.)
    First try updating to iTunes 11.1.5.5, using an installer downloaded from the Apple website:
    http://www.apple.com/itunes/download/
    If you still get the errors after that, try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • I was told to update iTunes. The update failed. Now I can't open iTunes but get the following messages: The program can't start because MSVCR80.dll is missing from your computer. Try reinstating the program to fix this problem.  Then I get iTunes was not

    I was told to update iTunes. I did and it failed. Then every time I tried to open iTunes I get the following message: "The program can't start because MSVCR80.dll is missing from your computer.  Try reinstalling the program to fix this problem." Then I get the following: "iTunes was not installed correctly.  Please reinstall iTunes. Error 7 (windows error 126)." I have uninstalled and installed iTunes a couple of times with no luck. I cannot even access iTunes support

    Troubleshooting issues with iTunes for Windows updates - MSVCR80

  • I have updated my iTunes to the latest edition and now my iTunes wont open saying MSVCR80.dll is missing from my computer and that i have to reinstall itunes. I have tried reinstalling twice now and this error message keeps appearing. What is going on?

    I have updated my iTunes to the latest edition and now my iTunes will not open saying MSVCR80.dll is missing from my computer and that i have to reinstall itunes. I have tried reinstalling twice now and this error message keeps appearing. What is going on?

    Solving MSVCR80 issue and Windows iTunes install issues.

  • Problem installing iTunes update: "Can't start" iTunes "because MSVCR80.dll is missing" from my computer. Please help!

    Please help! I tried to update my iTunes as prompted, but it did not install correctly, and now I am getting the following message and do not know how to fix the problem: 
    "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling this program to fix the problem."
    Another window gives me this message:
    "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126)"
    BUT I AM AFRAID  TO REINSTALL iTUNES and lose my library! Would greatly appreciate learning how to resolve this porblem without losing my music!
    Cheers!

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • I just downloaded an update to ITunes this morning, and now I am getting an error message saying iTunes can't start because MSVCR80.dll is missing from my computer. What the heck happened?

    I just downloaded the latest update for iTunes this morning, and now I am getting a message saying that iTunes can't start because MSVCR80.dll is missing from my computer.  What the heck happened?

    Troubleshooting issues with iTunes for Windows updates - MSVCR80

  • Opening iTunes shows an error- The program can't start because AVFoundationCF.dll is missing from your computer. Try reinstalling the program to fix this problem. ; Even after reinstalling iTunes doesn't start!

    When I start the iTunes program it comes up with this.. pls help!!
    "The program can't start because AVFoundationCF.dll is missing from your computer. Try reinstalling the program to fix this problem."
    Even after reinstalling iTunes doesn't start!

    Repair your Apple Application Support.
    Control Panel > Programs n Features (Win7) or Add n Remove Programs(XP) > highlight AAS, click CHANGE then REPAIR.

  • I ran an iTunes update.  It failed with the message  System Error.  The program can't start because MSVCR80.DLL is missing from your computer.  Try reinstalling the program to fix this problem.   I tried reinstalling but get the same message.

    I ran an iTunes update.  It failed with the message  "System Error.  The program can't start because MSVCR80.DLL is missing from your computer.  Try reinstalling the program to fix this problem."   I tried reinstalling but get the same message.  I looked in my Recycle Bin for that file name but there is none there.  Is this a new file that iTunes wants?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99683)

  • Can't download itunes update.  Keep getting this error message:  THe program can't start because MSVCR80.dll is missing from your computer.  Try reinstalling the program to fix this problem

    Can't download itunes update.  Keep getting this error message:  THe program can't start because MSVCR80.dll is missing from your computer.  Try reinstalling the program to fix this problem

    I researched the advice on the link provided by b noir as well as very similar advice from apple support: http://support.apple.com/kb/TS5376. It worked for me (for now).
    Some things of note:
    I did all of the things requested by the link I provided
    My computer WOULD NOT uninstall Apple Mobile Device Support. I had to manually remove the folder (also as instructed by the url)
    I also uninstalled MobileMe. Was a little different than removing the other apps. Follow instructs provided here: http://support.apple.com/kb/HT2992
    I did not uninstall iCloud
    I have to admit it was a bit scary removing all those things. Is important to note that when re-installing Apple, follow steps to do so as Administrator (the right-click thingy and whatnot).
    Hope this helps!

  • After loading the latest Aperture 3 update, aperture will not load and it appears to have corrupted 10.6.  10.6.7 now appears to be missing from the computer and my administrator status has changed to standard.

    After loading the latest Aperture 3 update, aperture will not load and it appears to have corrupted 10.6.7. and now appears to be missing from the computer and my administrator status has changed to standard.  Update Software says I need to do update to 10.6.7 which I can't do because administrator privileges are gone.   I didn't back-up with Time Machine ,BAD, but I have all files backed-up on another hard drive.  Should I just reformat and start over?  Any ideas or help would be appreciated.

    PROBLEM SOLVED! For me at least!
    Apple Support gave me the clue - I had run Migration Assistant, and it had obligingly replaced a system file (/Library/Frameworks/PluginManager.framework/Versions/B/PluginManager) with the equivalent from my old system.
    I reinstalled 10.6.7 using the DVD supplied and all is well.
    The moral is - don't use Migration Assistant.
    Along the way Apple Support provided me with a link to download Combo update 10.6.7: this could not be installed on my iMac.
    Hope this helps.

Maybe you are looking for

  • PO print preview displays incorrect setting in decimal places

    Dear Experts Please help me on the following condition. I have a problem in print preview of a PO. It displays the incorrect setting for decimal place in currency. It shows USD 1.404,00 whereby the amount should be USD 1,404.00 This only happens to a

  • Can I run two midi controllers (keyboard  and pad) at the same time?

    ie.....can I play keyboard and use a pad for an effect of some sort - creating two instraments at the same time. I want to play say, piano on one instrament w/ a keyboard and at the same time play a synth effect on a trigger pad with another instrame

  • SharePoint 2010 Blog Email Alert Issue

    I can't seem to make heads or tails of this issue. Any insight would be appreciated. When a user updates an existing blog post - for example to fix a typo - all users who have elected to receive alerts do, however the body of the content is displayed

  • Send attachment with receiver SOAP adapter

    Dear Guru's, We have created a scenario SAP ERP (ABAP Proxy) -> PI 7.0 -> (Webservice) OSB. In the ABAP Proxy have we attached a file (jpg). In the SXMB_MONI we see first the file (named attach), and second the MainDocument. It seem's this is the wro

  • How to set password for IIAS admin

    I have oracle IAS on linux, I would like to set a password for IAS admin. Thanks