Msvcr110.dll error

Tried to update to the newest version of Flash Player. The file in question is on the computer in two locations, including WOW64 which someone online said that's where Flash looks for the file.
The really bothersome problem is that the error message won't go away until I reboot the computer.. And yes, I tried reinstalling, but that didn't work.
Any ideas?

Reinstall the Visual C++ 2012 redistributable from http://www.microsoft.com/en-us/download/details.aspx?id=30679
The file may be there, but it may not be correctly registered.

Similar Messages

Entry point not found msvcr110.dll error

I have Photoshop CC and Lightroom CC both of which were working fine until I installed a PIE Primefilm XA scanner with CyberviewX software. The programs will not open since ibstalling CyberviewX. The following error appears: PSCC has a Photoshop.exe-Entry Point Not Found (The procedure entry point_crtCreateSymbolicLinkW could not be located in the dynamic link library MSVCR110.dll. Any help would be much appreciated. This error only seems to be associated with CS CC and LR CC.

Had the same problem with Lightroom 6. This solved the problem
The Program can't start because MSVCR110.dll is missing from your - Microsoft Community

Download error Exit Code: 6 -deleted file msvcr110.dll

I have Photoshop CS4. I joined the Cloud today. When I went to download Photoshop CV it gave me these errors:
Exit Code: 6
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 8 error(s)
----------- Payload: Microsoft Visual C++ 2010 Redistributable Package (x64) 10.0.40219.325 {54B0C34F-18F9-11E2-BC1D-00215AEA26C9} -----------
ERROR: Third party payload installer vcredist_x64.exe failed with exit code: 1603
ERROR: Failed to install Microsoft Visual C++ 2010 Redistributable Package (x64). Please try installing it by double clicking on the executable at "C:\Users\gyork\AppData\Local\Temp\{A1DCE3E8-850D-4131-836A-E00EFCFCE3B0}\Photoshop_15_LS 20_win64\Adobe CC 2014\payloads\Microsoft VC 2010 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2010 Redistributable Package (x64) from Microsoft website - www.microsoft.com
----------- Payload: Microsoft Visual C++ 2010 Redistributable Package (x86) 10.0.40219.325 {55B82130-18F9-11E2-8D43-00215AEA26C9} -----------
ERROR: Third party payload installer vcredist_x86.exe failed with exit code: 1603
ERROR: Failed to install Microsoft Visual C++ 2010 Redistributable Package (x86). Please try installing it by double clicking on the executable at "C:\Users\gyork\AppData\Local\Temp\{A1DCE3E8-850D-4131-836A-E00EFCFCE3B0}\Photoshop_15_LS 20_win64\Adobe CC 2014\payloads\Microsoft VC 2010 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2010 Redistributable Package (x86) from Microsoft website - www.microsoft.com
----------- Payload: Microsoft Visual C++ 2012 Redistributable Package (x64) 11.0.61030.0 {3E272A93-C06B-4206-AD02-0EBE02535E20} -----------
ERROR: Third party payload installer vcredist_x64.exe failed with exit code: -2147023293
ERROR: Failed to install Microsoft Visual C++ 2012 Redistributable Package (x64). Please try installing it by double clicking on the executable at "C:\Users\gyork\AppData\Local\Temp\{A1DCE3E8-850D-4131-836A-E00EFCFCE3B0}\Photoshop_15_LS 20_win64\Adobe CC 2014\payloads\Microsoft VC 2012 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2012 Redistributable Package (x64) from Microsoft website - www.microsoft.com
----------- Payload: Microsoft Visual C++ 2012 Redistributable Package (x86) 11.0.61030.0 {873BE68F-480F-49A6-9649-F98CAB056AFC} -----------
ERROR: Third party payload installer vcredist_x86.exe failed with exit code: -2147023293
ERROR: Failed to install Microsoft Visual C++ 2012 Redistributable Package (x86). Please try installing it by double clicking on the executable at "C:\Users\gyork\AppData\Local\Temp\{A1DCE3E8-850D-4131-836A-E00EFCFCE3B0}\Photoshop_15_LS 20_win64\Adobe CC 2014\payloads\Microsoft VC 2012 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2012 Redistributable Package (x86) from Microsoft website - www.microsoft.com
When I tried to do the first thing it said to do, it deleted the msvcr110.dll file.
Photoshop CV won't open without it.
So of course, I don't want to do anything else it says to do.
I have gone online and tried everything I see to get it back and nothing works. I tried downloading it from Microsoft, but it won't run.
I tried reinstalling CS4 and that didn't work. So I uninstalled CS4 and tried to reinstall it, but now it won't install.
It goes through the whole process then says to call Adobe.
When I try to install Illustrator (which I didn't have before, but bought the complete special offer) it has similar errors.
Any ideas?
Thanks

Hi jessmom3,
You may also refer to the help document:
Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5
Regards,
Sheena

R6025 ERROR MSVCR110.dll

The way I can easy crash Premiere Pro CC 8.1 <last version
Multi-Camera source > MC nested> into a new 3rd Nest, then scrub timeline and then bang R6025 Everytime
Means I can't work with a 3rd nest
Please tell me if and how I can submit the crash log, or tell me where to find it.
I may get sometime to make a video of this reprocuable crash.
I have tried reinstalling he MS Virtual Runtime C++ again. And run every single Windows Update.
Done the Trash Prefs Several Times, done the clear caches of course, in case
Microsoft Visual C++ Runtime Library
Program: C:\Program Fil
R6025
- pure virtual function call
roblem signature:
Problem Event Name: APPCRASH
Application Name: Adobe Premiere Pro.exe
Application Version: 8.1.0.81
Application Timestamp: 5426694c
Fault Module Name: MSVCR110.dll
Fault Module Version: 11.0.51106.1
Fault Module Timestamp: 5098826e
Exception Code: 40000015
Exception Offset: 00000000000740da
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 2057
Additional Information 1: 1e27
Additional Information 2: 1e2716990031006cb67b14984e19d447
Additional Information 3: 6913
Additional Information 4: 69136a7c6ceb066669f461facf8e7047
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Try this Microsoft solution
Program Can't Run because MSVCR110.dll Missing - Microsoft Community
Nancy O.

Media Encoder Will Not Launch - MSVCR110.dll

Since I'm not getting any help in the Premiere Forum, I'm re-posting this here....
After installing updates to both MS and Adobe CC this morning, I cannot get the Media encoder to launch. However After Effects launches just fine. Premiere crashes during the splash screen but the error is different.
Media encoder doesn't even make it to the splash screen.
Media Encoder Error:
Log Name:      Application
Source:        Application Error
Date:          1/14/2015 7:42:17 AM
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      JANUS
Description:
Faulting application name: Adobe Media Encoder.exe, version: 8.2.0.54, time stamp: 0x5486ba54
Faulting module name: MSVCR110.dll, version: 11.0.51106.1, time stamp: 0x5098826e
Exception code: 0x40000015
Fault offset: 0x00000000000740da
Faulting process id: 0xb14
Faulting application start time: 0x01d030084ab27640
Faulting application path: C:\Program Files\Adobe\Adobe Media Encoder CC 2014\Adobe Media Encoder.exe
Faulting module path: C:\Windows\system32\MSVCR110.dll
Report Id: 88aeb893-9bfb-11e4-bd8d-000272d5be15
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-14T14:42:17.000000000Z" />
    <EventRecordID>15101</EventRecordID>
    <Channel>Application</Channel>
    <Computer>JANUS</Computer>
    <Security />
</System>
<EventData>
    <Data>Adobe Media Encoder.exe</Data>
    <Data>8.2.0.54</Data>
    <Data>5486ba54</Data>
    <Data>MSVCR110.dll</Data>
    <Data>11.0.51106.1</Data>
    <Data>5098826e</Data>
    <Data>40000015</Data>
    <Data>00000000000740da</Data>
    <Data>b14</Data>
    <Data>01d030084ab27640</Data>
    <Data>C:\Program Files\Adobe\Adobe Media Encoder CC 2014\Adobe Media Encoder.exe</Data>
    <Data>C:\Windows\system32\MSVCR110.dll</Data>
    <Data>88aeb893-9bfb-11e4-bd8d-000272d5be15</Data>
</EventData>
</Event>
Premiere Error:
Log Name:      Application
Source:        Application Error
Date:          1/14/2015 7:25:14 AM
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      JANUS
Description:
Faulting application name: Adobe Premiere Pro.exe, version: 8.2.0.65, time stamp: 0x5486db4a
Faulting module name: dvaui.dll, version: 8.2.0.65, time stamp: 0x5486b61b
Exception code: 0xc0000005
Fault offset: 0x00000000001871a8
Faulting process id: 0x2850
Faulting application start time: 0x01d03005e5267507
Faulting application path: C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\Adobe Premiere Pro.exe
Faulting module path: C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\dvaui.dll
Report Id: 26edb042-9bf9-11e4-bd8d-000272d5be15
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-14T14:25:14.000000000Z" />
    <EventRecordID>15073</EventRecordID>
    <Channel>Application</Channel>
    <Computer>JANUS</Computer>
    <Security />
</System>
<EventData>
    <Data>Adobe Premiere Pro.exe</Data>
    <Data>8.2.0.65</Data>
    <Data>5486db4a</Data>
    <Data>dvaui.dll</Data>
    <Data>8.2.0.65</Data>
    <Data>5486b61b</Data>
    <Data>c0000005</Data>
    <Data>00000000001871a8</Data>
    <Data>2850</Data>
    <Data>01d03005e5267507</Data>
    <Data>C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\Adobe Premiere Pro.exe</Data>
    <Data>C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\dvaui.dll</Data>
    <Data>26edb042-9bf9-11e4-bd8d-000272d5be15</Data>
</EventData>
</Event>
System Information:
NVIDIA System Information report created on: 01/14/2015 07:43:58
System name: JANUS
[Display]
Operating System: Windows 7 Enterprise, 64-bit (Service Pack 1)
DirectX version: 11.0
GPU processor: GeForce GTX 750 Ti
Driver version: 347.09
Direct3D API version: 11
Direct3D feature level: 11_0
CUDA Cores: 640
Core clock: 1176 MHz
Memory data rate: 5400 MHz
Memory interface: 128-bit
Memory bandwidth: 86.40 GB/s
Total available graphics memory: 4096 MB
Dedicated video memory: 2048 MB GDDR5
System video memory: 0 MB
Shared system memory: 2048 MB
Video BIOS version: 82.07.32.00.50
IRQ: 24
Bus: PCI Express x16 Gen2
Device Id: 10DE 1380 37593842
Part Number: 2010 0050
[Components]
NvGFTrayPluginr.dll 16.18.9.0 NVIDIA GeForce Experience
NvGFTrayPlugin.dll 16.18.9.0 NVIDIA GeForce Experience
nvui.dll 8.17.13.4709 NVIDIA User Experience Driver Component
nvxdsync.exe 8.17.13.4709 NVIDIA User Experience Driver Component
nvxdplcy.dll 8.17.13.4709 NVIDIA User Experience Driver Component
nvxdbat.dll 8.17.13.4709 NVIDIA User Experience Driver Component
nvxdapix.dll 8.17.13.4709 NVIDIA User Experience Driver Component
NVCPL.DLL 8.17.13.4709 NVIDIA User Experience Driver Component
nvCplUIR.dll 8.1.740.0 NVIDIA Control Panel
nvCplUI.exe 8.1.740.0 NVIDIA Control Panel
nvWSSR.dll 6.14.13.4709 NVIDIA Workstation Server
nvWSS.dll 6.14.13.4709 NVIDIA Workstation Server
nvViTvSR.dll 6.14.13.4709 NVIDIA Video Server
nvViTvS.dll 6.14.13.4709 NVIDIA Video Server
NVSTVIEW.EXE 7.17.13.4709 NVIDIA 3D Vision Photo Viewer
NVSTTEST.EXE 7.17.13.4709 NVIDIA 3D Vision Test Application
NVSTRES.DLL 7.17.13.4709 NVIDIA 3D Vision Module
nvDispSR.dll 6.14.13.4709 NVIDIA Display Server
NVMCTRAY.DLL 8.17.13.4709 NVIDIA Media Center Library
nvDispS.dll 6.14.13.4709 NVIDIA Display Server
PhysX 09.14.0702 NVIDIA PhysX
NVCUDA.DLL 8.17.13.4709 NVIDIA CUDA 7.0.18 driver
nvGameSR.dll 6.14.13.4709 NVIDIA 3D Settings Server
nvGameS.dll 6.14.13.4709 NVIDIA 3D Settings Server

Hi ELFrederick,
ELFrederick wrote:
Nevermind, I got it working last night by uninstalling the programs that Patch Tuesday broke. Premiere, Media Encoder, and I found out that Prelude wasn't working either.
All working now after an uninstall, reboot, and reinstall. The patches also reset my creative cloud folder from it's custom location to default.location, and I have to move it back to the other location. My SSD is smallish and I didn't want the data files there, just the OS and the program files.
Good to know. Thanks for reporting back!
Kevin

LR cc will not start missing MSVCR110.dll How can I re-install CC Applications?

After uninstalling Lightroom 5.7 from my Wni7(64) PC Lightroom CC will not start and displays the following message ... lightroom.exe - System Error "The program can't start because MSVCR110.dll is missing from your computer. Try reinstalling the program to fix this problem."

That file is part of the Microsoft Visual Studio distributable package that is available from this link:
Download Visual C++ Redistributable for Visual Studio 2012 Update 4 from Official Microsoft Download Center

Photoshop Elements 13 doesn't start after Update to Win8.1 (MSVCR110.dll is missig)

Hello everybody
I installed the Update from Win8 to Win8.1
Now Photoshop Elements 13 doesn't start.
The mistake/error: "The program doesn't start, because MSVCR110.dll is missing. Re install the program."
So I re installed Photoshop but the mistake is still there.
What can I do?
LG Simon

Try steps mentioned on blog: http://psekb.blogspot.in/2013/04/pse-editor-is-not-launching-windows.html
Please let me know if that doesn't resolves the issue.
~Andromeda

Lightroom: Einsprungpunkt nicht gefunden. Der Prozedureinsprungpunkt "__crtCreateSymbolicLinkW" wurde in der DLL "MSVCR110.dll" nicht gefunden.

Hello,
Lightroom 5.7.1 worked, but after the installation of the update Lightroom CC (2015) as well as Photoshop CC (2014) didn't work anymore with the following errormessage:
Lightroom.exe - Einsprungpunkt nicht gefunden.
Der Prozedureinsprungpunkt "__crtCreateSymbolicLinkW" wurde in der DLL "MSVCR110.dll" nicht gefunden.
I deinstalled everything and reinstalled it, but without no effect.
I saw this error already once in the foruim, but without answer to it.
Anyone else who had the problem? any idea for a solution?
Thank you.
br
Marc

Hi,
I renamed the the dll, also the msvCp110.dll and reinstalled then Microsoft Visual C++ 2012 Redistributable Package - after that it worked.
br
marc

Missing MSVCR110.dll

PC System - Windows 7 (64bit) - Error when trying to run Elements 13 - "this program can't start as MSVCR110.DLLis missing,," in answer to the suggested solutions i have downloaded and instyallaed Adobe - Creative Cloud, Bridge CC, Lightroom 5.7.1, Edge Code CC, Edge Inspect.CC, EdgeReflow CC, ExtensScript Toolkit CC, Extension Manager CC, Nik Collection and run vcrdist_64.exe from various locations within these files and also copied the file MSCVR110.dll to various locations within the file strusture- Still no success!

You mean you have Visual C++ Redistributable for Visual Studio 2012 Update 4Visual C++ Redistributable for Visual Studio 2012 Update 4 (http://www.microsoft.com/en-us/download/details.aspx?id=30679# ) installed on the PC, right? If so, you can try reinstalling all VC++ redistributable packages on the PC to fix the problem.
Good luck.
Source: How to Effectively Fix MSVCR110.dll Missing Error? | Fix EXE & DLL Errors

Guide to overcome hal.dll error - disk error & other errors.

Okay to start off with - guide for installing bootcamp.
DISCLAIMER:
I take no responsibility at all - whatsoever for any damage the following steps cause to anything. If you follow this guide and then are annoyed at me in any way - don't be - you followed these steps knowing they could be dangerous to your hard drive / computer / sanity / etc. That said - good luck & these steps should work for everyone.
requirements: XP SP2 CD & a copy of parallels would be useful. Also a non-apple usb keyboard for step 1 if the apple one doesn't work during xp bootup.
1. First try the usual bootcamp assistant method. Insert the xp disk, in the setup make sure you format the drive to NTFS (not quick). If you don't get this option - skip to step 3.
2. Reboot and hopefully everything will go without a hitch. If it doesn't and you get a hal.dll error or any other kind of error go on to the next step.
3. Boot up mac os x. Install parallels desktop.
4. Insert your windows xp sp2 cd.
5. Create a new virtual machine using a virtual hard drive saved in your documents folder somewhere.
6. Configure it so that the bootcamp drive is added as an extra secondary drive in the virtual machine. (Little plus button down at the bottom).
7. Install XP onto the virtual machine - don't activate or anything, just get to the desktop stage as fast as possible.
8. Parallels will have already asked for your password to dismount the boot camp drive.
9. Double click my computer in the virtual machine, then hold down ctrl+shift and click on the BOOTCAMP partition in the my computer window.
10. Click format.
11. Select NTFS as file format, check enable compression - do not check quick format.
12. Wait till its finished and then power down the virtual machine.
------- The following steps are taken from http://communities.vmware.com/thread/114529 and were written by MandarMS from the vmware forums. I have edited the guide a little - (you'll see where). Thanks and all credit to MandarMS.----
13. (James: Close parallels)
14. Quit all applications in Host Mac OS X
15. Open Terminal utility from Macintosh HD : Applications : Utilities folder.
16. Key-in the following command
$ sudo fdisk /dev/rdisk0
17. Preferably take the screenshot of the output or Note down the output (for restoring MBR).
18. Key-in the following command
$ sudo fdisk -e /dev/rdisk0
setpid 3
Choose 07 (as the partition type)
write
Y
Restart your Mac System
(James: EDIT - BELOW IS AN EXAMPLE OF THE OUTPUT OF THE PROGRAM IF YOU ARE UNSURE OF WHAT TO TYPE IN WHERE - This confused me at first but really helped in the end - James)
For more details please check the example shown below:
$ sudo fdisk -e /dev/rdisk0 (this will help to change the MBR)
$ fdisk: could not open MBR file /usr/standalone/i386/boot0: No such file or directory
Enter 'help' for information
fdisk: 1> setpid 3 (Enter “setpid 3” press enter key)
Starting Ending
#: id cyl hd sec - cyl hd sec start - size
*3: 0B 1023 254 63 - 1023 254 63 1127792680 - 337356448 Win95 FAT32L
Partition id ('0' to disable) 0 - FF: [C] (? for help) 07 (Enter 07 Partition table)
fdisk:*1> write (enter “write” press enter key, This will change the MBR)
Device could not be accessed exclusively.
A reboot will be needed for changes to take effect. OK? [n] Y (Press Y to modify changes)
Writing MBR at offset 0.
$ fdisk: 1> exit (enter “exit”, press enter key)
19. Restart your Mac System
------ Back to me again.
20. Welcome back - your drives have just been fixed. Reboot again and insert the windows xp sp2 cd. Hold down option at startup and boot from the cd.
21. Go through the setup again - this time don't do anything to the drives when it asks you to format.
22. wait...
23. It'll reboot......
24. It'll install..... if it doesn't - skip to step 26
25. Welcome to windows, install your drivers and reboot a couple more times. You're good.
26. (it didn't work... you got the hal.dll error or something similar) Boot up mac os x again and launch parallels.
27. Start up the virtual machine - open up BOOTCAMP in my computer.
28. Click view - folder options
29. View types > make sure you can see hidden files and folders, view system files and etc.
30. Right click boot.ini and click properties
31. Uncheck read-only.
32. Click okay - open boot.ini in notepad.
33. If you're on a mac with 2 partitions: 1 mac hd, 1 bootcamp, delete everything in the boot.ini file and copy and paste the following into it:
\[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(3)\WINDOWS
\[operating systems]
multi(0)disk(0)rdisk(0)partition(3)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect
Obviously change the name to suit. Save it and reboot - you should be good to go now.

Hi. Your bootcamp drive should be drive C. It shouldn't matter what drive letter it is really, you make the virtual machine disk as a virtual disk saved in your documents folder and hook it in to use your physical bootcamp drive.
Ensure you've typed in the correct command and correct password. Press enter after you type in the password. You won't see it as you type it in, and you may need to wait some time afterwards before you'll see the next prompt. Leave it 2 minutes.
Sorry I've been abroad.. hope you have it worked out by now anyway mate.

NI 5660 Driver DLL Errors when using Teststand 2010 and LabVIEW Run-Time Engine 2010

This problem seems similar to the post "Resource not found error in executable on development machine." but I didn't want to repost under that thread because I only happened upon it by chance and none of my searches brought me there... so I made a more descriptive Subject.
I am working on a system that uses a PXI Chassis with a NI 5600 Downconverter and a NI 5620 high speed digitizer, among other PXI Cards.
I inherited working code written in LabVIEW 2010, running with the LabVIEW Run-Time Engine 2010. The code was using a custom executive and my task was to rewrite the test using TestStand 2010. I reused the majority of the old code. The old code used NI-5660 to control the 5600 and 5620. When I run my sequence using the LV Development System and TestStand, it runs without any issues. When I change the adapter over to LabVIEW Run-Time Engine 2010, all of my NI5660 VIs become broken due to DLL issues. It warns that the nipxi5600u.dll was not initialized correctly. Many of the errors are associated with the NI Tuner and NI Scope. After this LabVIEW will crash randomly, and the seqeunce will not work in TestStand even when back with the LV Development Adapter. The only way to recover after this is to restart the computer - TestStand automatically reverts back to the development system, the VIs are no longer broken and the sequence works again.
I have all of my VIs associated with a project. After reading a little bit about DLLs and TestStand, I found all of the DLLs in the dependencies section of my project and added them to my TestStand workspace. I also used Dependency Walker to track down the problems with the nipxi5600u.dll, the 2 DLL files that it said were not found already existed in the same folder as the original DLL (C:\Windows\System32). I have also performed a Mass Compile to make sure everything was running in LV 2010. If I skip the steps involving the 5660, my entire sequence runs fine.
The previous code was running with the LabVIEW Run-Time Engine without any issues. Is there just a step I am missing? Has anyone seen anything like this before? I can send screenshots of errors to provide more detail if necessary.

I have tried some more things and still can't get it to work. I have added the VIs mentioned in the Notes On Creating Modulation Executables KB both to the TestStand workspace and the LabVIEW project holding all of my VIs. This did not change the results.
When I try to run my sequence, The first error I get is shown in Error 1445.bmp. This happens when I try to use the NI 5660 initialize.vi. If I click ignore, the next error I see is shown in Error -20551.bmp. When I try to open the VI to look at it, I get the 2 DLL errors shown in Error loading nipxi5600u.bmp and Error loading nidaq32.bmp. When I close TestStand, I get the error LabVIEW Fatal Error.bmp.
Attachments:
Error1445.JPG ‏164 KB
Error -20551.JPG ‏174 KB
Error loading nipxi5600u.JPG ‏9 KB

Hello, I have windows 7, Im getting msvcr80.dll error 7(windows error 126) when I tried to update my itunes. Now it won't open. Does anyone have a remedy? And when I try to uninstall it says that the file cant be found.

Hello< I have windows 7, I tried to install the new itunes version, last night 1/30/14, Im getting msvcr80.dll error 7 (windows error 126). Does anyone have a remedy for this? When I try to uninstall the ituned program it says it can't be found and to make sure I have permission to uninstall.

Same problem today. Took five times to reinstall without any error messages. I did the following:
1) Went to the C:\program files (x86)\iTunes and C:\program files\iTunes folders and moved every file ending in .dll to the desktop (even if two files in same location had the same name, just replaced)
2) Restarted computer and still got error message
3) Uninstalled all apple programs possible in the following order......itunes, apples software update, apple mobile device support, bonjour, and apple application support.....all performed using the microsoft control panel
4) put all the .dll files on the desktop in the trash and emptied (this is a step apple support did not recomment in their posted solutions but for a final try I wanted to delete everything apple).
5) Restarted computer.
6) Re-installed itunes from apple website
No error messages during re-install and was able to open shortcut in one try.

Server 2008 R2 Terminal Server c0000005 and c0000006 errors with KERNELBASE.dll error in RDP sessions.

We installed a new Server 2008 R2 server this spring. It is configured as a Terminal Server with 16 Wyse t10 thin clients connecting with RDP. We are a small resort so we run Springer Miller Host and SpaSoft. Ever since moving from PCs to the thin clients
and TS we have been seeing SpaSoft randomly crash with KERNELBASE.dll errors and also a lot of c0000005 and c0000006 errors. Springer Miller support says its a Microsoft Networking issue so no help there. The company we worked with to install this has no clue
so I hope to reach out to this community to solve this. I can also open support case with Microsoft Support but I am not sure if they will be of any help. Here are some examples of the errors:
"Event 1000
Faulting application name: SpaWin.exe, version: 3.4.0.0, time stamp: 0x2a425e19
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18409, time stamp: 0x53159a86
Exception code: 0x0eedfade
Fault offset: 0x0000c42d
Faulting process id: 0x3718
Faulting application start time: 0x01cf9ac7922487e9
Faulting application path: \\spasoft\spaapps\TermServ\SpaWin.exe
Faulting module path: C:\Windows\syswow64\KERNELBASE.dll
Report Id: cfdcf9a9-06ba-11e4-a5af-000c298d9aa5"
Also:
"Faulting application name: VH.EXE, version: 18.80.430.0, time stamp: 0x3f73b447
Faulting module name: VFP8R.DLL, version: 8.0.0.3117, time stamp: 0x3f73c232
Exception code: 0xc0000006
Fault offset: 0x0001d598
Faulting process id: 0x2bc8
Faulting application start time: 0x01cf99297ee1742f
Faulting application path: J:\HOSTPLUS\fxp32\VH.EXE
Faulting module path: J:\HOSTPLUS\fxp32\VFP8R.DLL
Report Id: 5fbc65c4-055c-11e4-a5af-000c298d9aa5"
And:
"Faulting application name: SpaWin.exe, version: 3.4.0.0, time stamp: 0x2a425e19
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x00000000
Faulting process id: 0x2aa0
Faulting application start time: 0x01cf988e6770e619
Faulting application path: \\spasoft\spaapps\TermServ\SpaWin.exe
Faulting module path: unknown
Report Id: 01029179-04b9-11e4-a5af-000c298d9aa5"
There are no network specific errors in any of the logs. I am thinking that SpaSoft needs to be run as an administrator but I am not sure how to do that in this environment. We have disabled DEP for all but essential Windows processes. All of the firewall
and AV has been completely disabled, and still getting these errors. Is there a way to run these applications as admin without the user actually being an admin? Should I go ahead and open a Microsoft support case? Thanks

Hi,
Thank you for posting in Windows Server Forum.
Explanation
The indicated program stopped unexpectedly. The message contains details on which program and module stopped. A matching event with Event ID 1001 might also appear in the event log. This matching event displays information about the specific error that occurred.
User Action
If an error report was generated for this error, you might be able to obtain more information about the error by sending the report to Microsoft for analysis.
Yeah, you can open a support case with Microsoft as they will help and guide you for proper solution. You can go through
this source article.
Hope it helps!
Thanks.
Dharmesh Solanki

IPod Classic Crashes randomly with ntdll.dll error

Sometimes when I plug-in my 120GB iPod Classic, iTunes would crash, giving me a ntdll.dll error, and I would need to unplug my iPod classic before it would allow iTunes to start again. Upon disconnect, the iPod will try to restart and then it would unsuccessfully do so, and then it would reboot and tell me to restore via iTunes. After I plug it back in, the iPod would restore fine. It seems that if I don't sync my iPod for a couple of days, the possibility of this error happening is most likely, versus if I plugged it in consistently every day.
I have had this issue for quite a while here are the steps that I've taken to try to mediate this issue:
-Switched iPod twice with Apple Store
-Tried the sync on two different computers with completely different hardware (but windows 7 on both)
-Made a new iTunes library
-Search the support forums/google
-Tried various cables
Here is the error logs from the most recent crash:
Faulting application name: iTunes.exe, version: 9.0.3.15, time stamp: 0x4b590a69
Faulting module name: ntdll.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdadb
Exception code: 0xc0000005
Fault offset: 0x00052bf8
Faulting process id: 0x384
Faulting application start time: 0x01cad74f5f441de7
Faulting application path: C:\Program Files\iTunes\iTunes.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: a9fac431-4342-11df-9742-00238bf6c0ab
Any help would be appreciated!

OK So I sync'd it this afternoon and in the evening, I plugged it in again, and this time it caused iTunes to crash with this error:
Faulting application name: iTunes.exe, version: 9.0.2.25, time stamp: 0x4afca401
Faulting module name: iTunes.dll, version: 9.0.2.25, time stamp: 0x4afca3e5
Exception code: 0xc0000005
Fault offset: 0x00abc4c0
Faulting process id: 0x728
Faulting application start time: 0x01cad7c0e0284b0c
Faulting application path: C:\Program Files\iTunes\iTunes.exe
Faulting module path: C:\Program Files\iTunes\iTunes.dll
Report Id: b9bf634a-43b4-11df-b2dc-0015f20ac1cf

Here are the instructions on how to fix the newest update problem with the .dll error message:, Here are the instructions on how to fix the newest update problem with the .dll error message:

Go to My Computer, Uninstall Programs, and uninstall in this exact order :
      Itunes
      Apples Software Update
     Apple Mobile Device Support
     Bonjour (my system required a reboot on this one)
     Apple Application Support
Reboot your computer, go to the official Itunes website (make sure it's the Apple Itunes Website and not some other one!), and reinstall Itunes.
I got the same .dll error message after the reinstall, but my Itunes was downloaded successfully and I was able to Sync my phone. : )
Good luck to you and God Bless!
(Sad that we have to come to the Discussion Forum to figure this all out instead of Apple taking care of their business and helping us out, huh?)

Someone else said they did a system restore to a previous update, and then a java update and that worked for them, saying they were going to stick with the earlier version of itunes until they get the bugs out of the new one. I t tried restores and that didn't work for me either, but maybe it will work for you. Good luck and I hope you get it working soon..

Msvcr110.dll error

Similar Messages

Maybe you are looking for