MTA Not Listening

I'm not sure when this started (it might have been when I did an security patch upgrade recently) but when I bring up the GroupWise Monitor it shows that MTA is "Not Listening".
It appears that everything is working so I don't want to break something else in order to "fix" this issue.
The POA and GWIA have SNMP enabled and I can get to those screens just fine.
However, I see through the log file that SNMP is not enabled for MTA, (SNMP Disabled).
I see in some documentation to edit the snmpd.conf file (I found it in /etc/snmp) and add:
dlmod Gwsnmp /opt/novell/groupwise/agents/lib/libgwsnmp.so
But, if the POA and GWIA have SNMP enabled, why isn't MTA.
Can I add that line with out breaking the POA and GWIA?
Confuser than usual...

I can't get into the MTA web interface either (https://ip.of.mta:7180). I get an SSL connection error, which I hadn't gotten before. Nothing has changed with respect to settings in iMonitor or ConsoleOne, so I am unsure why this is happening. I noticed this first before I went into the GroupWise Monitor. I've looked over the MTA Object's configuration in ConsoleOne and I see the Certificate file and SSL Key file settings haven't changed and I located them in the directory where they should be. When I look at the log files for the MTA it looks to operating as it should <whew>. I just can't get to it. When I do a status of the GroupWise agents (rcgrpwise status) everything appears OK or if I do a restart the agents stop and restart as normal.

Similar Messages

MTA Unknown Status - Not Listening

Recently we installed GroupWise monitor on the same server as the MTA.
When I go to view the monitor webpage all the components (pos, gwia, webacc) all show green and happy, but the MTA shows the "Not Listening" status. Here's the fun part.
When monitoring the MTA using the MTA console everything looks fine.
However, when you click on the "Not Listening" link in GroupWise monitor it shows the MTA's address as the old Netware server's address that we migrated from. Hence the "Not Listening" status. Not sure why the old address is showing. I've looked all through the startup files for the post offices, MTA, GWIA and Webacc for anything that might reference the old MTA's ip address, but couldn't find anything.
It's really not a big deal since we can monitor it via the MTA's console, but it would be nice to have it available in the GroupWise monitor page so we can set traps, notifications, etc, etc.
Is there anyway I can fix this?

I will attempt to make a backup of the main DB and then rebuild it and then the POAs afterwards and see if that fixes anything. On another note... do you think that bad link information in the databases could be causing the post offices and webmail agents to just randomly quit once or twice daily. We've been having this issue since we upgraded to GW8. It may be another issue completely. Just curious what your thoughts were.
Originally Posted by aaronm04
I think this is your problem. It appears that somewhere in one of your GW domain databases, the old address still exists. If your POA won't connect w/o that switch, then the bad IP info is coming from the GW DB. If you find that and fix it, I would think GWMonitor would follow suit.
Is this your primary domain? Is it the parent of the GWMonitor object/app? If you have multiple domains, connect ConsoleOne to each one and verify the IP of the object in the MTA (not domain) properties. You might even consider a rebuild of the domain. If the child POs still don't connect w/o that switch (after you've verified the correct address in the MTA), you might consider rebuilding them too. They either aren't getting the updated info from the domain or the domain doesn't have the right info to begin with.
Report back what you find.
Aaron

Sles poa not listening on default ports

we dbcopied the domain and post office from netware 6.5.8 to sles 10 spk2, gw7.0.3.
installed mta, poa and gwia... the poa starts but is not listening on ports 1677, 7181 or 7101 all default ports.
all 3 agents are running on the host... these ports are not being used by any other service....
any ideas... or has any seen this....

* waketech,
firewall is down?
Uwe
Novell Knowledge Partner (NKP)
Please don't send me support related e-mail unless I ask you to do so.

I have an Ipod 5 and you can not listen to music unless you have headphone plugged in

I have an Ipod 5 and you can not listen to music unless you have headphones plugged in

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar

ITunes stops updating podcasts / iTunes has stopped updating this podcast because you have not listened to any episodes recently. Would you like to resume updating this podcast?

Hi,
My iTunes is set to automatically update podcasts and keep the last five episodes of each podcast.
However, iTunes appears to stop updating podcasts after several (five?) unwatched episodes and gives me an exclamation mark in the podcast overview. Clicking on that, I get the message: "iTunes has stopped updating this podcast because you have not listened to any episodes recently. Would you like to resume updating this podcast?"
This is not what I intend... and not what I told iTunes to do... (at least this my reading of the below settings)
This stopping is rather less then ideal: (1) if I am going away for two weeks, which I often do, I would still like to have the last five days of news, not the last five days of news back from the date I left, (2) I need to click update for approx. 20 podcast on regular basis, (3) my iPhone is synced to iTunes as soon as I come home, if iTunes does not have the podcasts downloaded, they are not copied over to the iPhone, and the iPhone will attempt to download the episodes via 3G next time I play the podcast on the go, (4) I am mainly using iTunes functions, such as smart playlists and podcasts, through another app (Plex, a fullscreen media player) and it is a pain to have to go to iTunes to manually do things. That is why this bothering me...
How can I get iTunes to behave as intended? (From reading through old posts I know that there is a Doug script adressing this problem, which I have just set up, but I would prefer to use internal settings if possible... maybe I am just missing a setting)
Thank you for your ideas!

Thank you for the response, Roger!
OK, that's how it is then.
The iTunes podcasts settings should be reworded in that case because it suggest something different from what it does. And, of course, it would be ideal for Apple to make this more flexible and allow users to set up their podcast downloads in their way and not be so motherly (c'mon, Apple, your users are not as dumb as you think, and they have uncapped Internet connections these days anyway)...
Btw., for anyone interested, this is external script I am using now:
http://dougscripts.com/itunes/scripts/ss.php?sp=updateexpiredpodcasts
Including the "cron job" setup here:
http://dougscripts.com/itunes/2011/12/updated-update-expired-podcasts-v2-2-and-l aunchd-project/
Cannot tell how well it works because I have just set it up, other members of the forum say it works for them...
If anyone knows of in-app solutions, please share...

GWIA not listening on HTTP port

I recently upgraded our GW8 to new hardware and eventually to 2012 sp1, now I'm seeing the following error in the GWIA log and the GWIA is not listening on its http port.
There is nothing listening on 9850 (default http port for gwia).
****** 04-10-13 10:03:39 ******
10:03:39 F476 ****************** Agent Restarted ******************
10:03:39 F476 MTP: Message Transfer Protocol initialization...
10:03:39 F476 MTP: Queue initialization...
10:03:39 F476 MTP: Queue initialization...
10:03:39 F476 Startup: No frgnames.cfg file found.
10:03:39 F3C7 Starting GWHTTP-Listener
10:03:39 F476 HTTP server running
10:03:40 F476 Error Listen Port is already in use. [856A]
10:03:41 F476 Shutdown of Threads
10:03:42 F476 Shutdown of Threads
After disabling GWIA POP / IMAP / LDAP (setting them to port 0) I'm getting the following(and still no http):
10:08:12 F476 ****************** Agent Restarted ******************
10:08:12 F476 MTP: Message Transfer Protocol initialization...
10:08:12 F476 MTP: Queue initialization...
10:08:12 F476 MTP: Queue initialization...
10:08:12 F476 Startup: No frgnames.cfg file found.
10:08:12 F3E7 Starting GWHTTP-Listener
10:08:12 F476 HTTP server running
10:08:13 F476 Error, Internal Udp Port is unusable. [8911]
10:08:14 F476 Shutdown of Threads
10:08:15 F476 Shutdown of Threads
GWIA is listening on the following ports, 1.2.3.4 being the server ip and I removed the POA connections.
# netstat -pan | grep -i gwia
tcp 0 0 1.2.3.4:7060 0.0.0.0:* LISTEN 12253/gwia
tcp 0 0 0.0.0.0:25 0.0.0.0:* LISTEN 12253/gwia
udp 0 0 0.0.0.0:41547 0.0.0.0:* 12253/gwia
Any ideas ?
Besides this GW is running just fine.

Originally Posted by laurabuckley
Oh ok.
Check to see if the firewall is disabled on the server.
Also, set an HTTP username and password in ConsoleOne then do a full stop and start of GWIA.
Please post back your results.
Cheers,
Hi Laura,
The firewall is disabled (double checked), there is a http username and password (re-set it) set in C1, a full stop and start did not make a difference.
Originally Posted by laurabuckley
One more thing.... if your POA is running on the same box try disabling POP and IMAP on the POA - restart the POA and GWIA.
Cheers,
We're actively using the POA IMAP so that's not something I can disable.
Thanks,
Arjan

10.1.2.0.2 OID not listening after database patch 10.0.5

Hi
I've installed database patch 10.0.5 to an Oracle Infrastructure 10.1.2.0.2. The software and scripts installed with no problems. I started the OID server using:
opmnctl start process-type=OID
Which always worked before and it returns with no errors. But OID is not listening on port 389. dcmctl start will throw an error trying to connect to OID.
Any ideas?

The readme for the patch has very detailed instructions !
OID needs to be up as you say plus the other components. But there is a good prereq checker before you run it.
If worried do a backup of $OH , the inventory and the IASDB then give it a try, if it fails just restore.

Child DC cannot Replicate to Parent DC, because of connection errors. MS PortQryUI shows that ports 3268 and 3269 are not listening,

I started a support case with Microsoft to help me with raising the our domain Forest level because i received a message stating that there were Windows 2000 PDC still listed in the database. These PDCs were removed years ago. The tech saw all of the problems
i was having with domain replication so that is where he started. running the MS PortQryUI shows that ports 3268 and 3269 are not listening, (TCP port 3268 (unknown service): NOT LISTENING) when run FROM a Child domain controller against the Parent
Domain controller. Between the 2 Child domain controllers these ports are listening.
The Windows firewall is not running on any of the controllers, i removed a virus protect client from all of the servers, although i didn't enable the firewall there either, but these ports are still not listening on the Parent DC.
I need help debugging this. I am not very familiar with network sniffers so if i need to run one i'll need some guidance. This DC only has one NIC, all IP addresses are static, all servers are setup like this. All servers are in the same subnet, on the same
lan, on the same cisco switch, there shouldn't be anything blocking this port from starting.
I looked over other post that show this same problem, but they don't give a solution. If i am not using the Windows firewall why wouldn't these ports be open?
Any ideas? web searches are all over the map on trying to find the reason for this.
Bobby

Try running the below command on the DCs that you think have the ports blocked or all the DCs.
netdiag /test:ipsec /debug > c:\dcname-ipseclog.log
Open that from the C drive and see if there is anything saying block or filters.
Also, just for kicks have you disabled the firewall service on the DCs?
And just for kicks have you tried enabling firewalls ports on all the DCs? The KB is below
http://support.microsoft.com/kb/555381/en-us
Step 1 - netdiag results
Step 2 - disable the firewall service on all DCs if step 1 was negative
Step 3 - enable the firewalls on all DCs per KB 555381 if step 2 doesn't work
Let us know how it goes!
If it answered your question, remember to “Mark as Answer”.
If you found this post helpful, please “Vote as Helpful”.
Postings are provided “AS IS” with no warranties, and confers no rights.
Active Directory: Ultimate Reading Collection

I can not listen to podcasts on my ipod 4

I can not listen to podcasts from itunes on my ipod 4. Is there anything I can do to get it to work?

If you have iOS 4.2.1 or later on the iPod and there was version compatible with that version, then you should be able to get a compatible version by:
App Store: Downloading Older Versions of Apps on iOS - Apple Club
App Store: Install the latest compatible version of an app
You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists.

Port 88 is not listening

I have seen in few servers and client machines , they are not listening on port 88.But I am able to login in that machine using my domain credential.
If it is not listening then how authentication will work?
Thanks
Ragavan

I have seen in few servers and client machines , they are not listening on port 88.But I am able to login in that machine using my domain credential.
If it is not listening then how authentication will work?
Thanks
Ragavan
I presume below two links will be helpful for you.
http://technet.microsoft.com/en-us/video/kerberos-authentication-how-it-works.aspx
http://technet.microsoft.com/en-us/library/cc772815%28v=ws.10%29.aspx
Awinish Vishwakarma - MVP
My Blog: awinish.wordpress.com
Disclaimer This posting is provided AS-IS with no warranties/guarantees and confers no rights.

ITunes has stopped updating this podcast because you have not listened . .

I found an archived article from two years ago: http://discussions.apple.com/message.jspa?messageID=8453115 and have found subsequent articles talking about outboard solutions that I have tried and do not work. The problem continues to this day. Why doesn't Apple just fix this themselves?
Exact text of the message, as if it is a mystery: iTunes has stopped updating this podcast because you have not listened to any episodes recently. Would you like to resume updating this podcast?
Yes. Yes. Permanently, yes. Stop asking the question.

creativestuff wrote:
Exact text of the message, as if it is a mystery: iTunes has stopped updating this podcast because you have not listened to any episodes recently. Would you like to resume updating this podcast?
Yes. Yes. Permanently, yes. Stop asking the question.
Although you may not like the way it's set up, Apple appears to have done this deliberately and therefore does not consider it broken. I suspect that they do it that way to conserve bandwidth.
Submit your feedback to Apple requesting something different here:
http://www.apple.com/feedback
Best of luck.

Listener not listening instance

hi,
I am strange why listener is not listening instance
listener and instance are up
anyone could help me??
I can give you more details as you need
[oracle@fsze88linux ~]$ lsnrctl status
LSNRCTL for Linux: Version 11.1.0.6.0 - Production on 19-DEC-2009 18:03:35
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for Linux: Version 11.1.0.6.0 - Production
Start Date                19-DEC-2009 17:52:08
Uptime                    0 days 0 hr. 11 min. 27 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /u01/app/oracle/product/11.1.0/db_1/network/admin/listener.ora
Listener Log File         /u01/app/oracle/diag/tnslsnr/fsze88linux/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521)))
Services Summary...
Service "test123" has 1 instance(s).
Instance "test123", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
[oracle@fsze88linux ~]$
[oracle@fsze88linux ~]$ export ORACLE_SID=test123
[oracle@fsze88linux ~]$ sqlplus / as sysdba
SQL*Plus: Release 11.1.0.6.0 - Production on Sat Dec 19 18:06:42 2009
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to an idle instance.
SQL> select instance_name, version, host_name, status
, database_status, to_char(startup_time,'DD-MON-YYYY HH:MI:SS') strtd
from v$instance; 2    3
INSTANCE VERSION    HOSTNAME         STATUS      DATABASE_STATUS   STARTED
test123 11.1.0.6.0 fsze88linux.wor OPEN      ACTIVE         19-12?-2009 06:09:47
              kgroup

Paul M. ,
I feel this question is still not solved.
content of listener.ora
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (GLOBAL_DBNAME = test123)
      (ORACLE_HOME = /u01/app/oracle/product/11.1.0/db_1)
      (SID_NAME = test123)
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
)tnsnames.ora
TEST123 =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = SHARED)
      (SERVICE_NAME = test123)
)yes, I can login that database test123. But lsnrctl status is UNKOWN.
[oracle@fsze88linux ~]$ lsnrctl status
LSNRCTL for Linux: Version 11.1.0.6.0 - Production on 19-DEC-2009 23:14:15
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for Linux: Version 11.1.0.6.0 - Production
Start Date                19-DEC-2009 23:11:54
Uptime                    0 days 0 hr. 2 min. 21 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /u01/app/oracle/product/11.1.0/db_1/network/admin/listener.ora
Listener Log File         /u01/app/oracle/diag/tnslsnr/fsze88linux/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521)))
Services Summary...
Service "test123" has 1 instance(s).
Instance "test123", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfullyis that cause of static pointing to that instance test123?
But why dynamic pointing is not work....
I feel very confused....
help help....

Sql 2008 express not listening on port 1433

I installed sql 2008 express on 2008R2 but it is not listening on port 1433.
I check configuration for tcp and enabled that already. also started sql browser service.
any idea?

I installed sql 2008 express on 2008R2 but it is not listening on port 1433.
I check configuration for tcp and enabled that already. also started sql browser service.
any idea?
by default SQL Server Express does not enable Remote Connections.
Could you check the following:
1) check that the SQL Express is running (SQL Server Configuration Tool)
2) log onto the box containing the SQL Server and try to connect with SSMS to the SQL Express instance. Try tcp/ip and/or shared memory to connect.
if you can successfully login check that the SQL Server does allow Remote Connections
3) Firewall does not block incoming connections
4) does the DNS server name resolve to the correct ip address of the SQL Server ?

POA ist not listening on port 7191

Hi,
When installing the mobility service I noticed that POA is not listening on port 7191.
How can I start this listening ?
Bye
Alfons

Originally Posted by Alfons
Hi,
When installing the mobility service I noticed that POA is not listening on port 7191.
How can I start this listening ?
Bye
Alfons
Take a look here: https://www.novell.com/documentation...nfig_user_soap
Thomas

GWIA "not listening" in GroupWise Monitor

When I check my GW Monitor to check the status of GroupWise, I see that the
GWIA is listed as "Not Listening". Mail is coming and going through the
GWIA (as evidenced by this message).
The problem appeared after a power outage that went on long enough for the
UPS to shut down servers. Wehn I restarted them This problem appeared. I
am running GW 8.0.2 on OES2 sp2 (linux). I also have GWAVA 4.5 running on
the same box.
I am assuming that it has to do with settings in the monitor? The log says
the GWIA is not running. When I try and go to
http://myserver-ip-address:9850 I get an "unable to connect" error.
What am I missing?
Thanks in advance!

Daniel,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

MTA Not Listening

Similar Messages

Maybe you are looking for