Mtl.txt and undo.txt in trash after reboot.

I have recently noticed after a restart that along with the recovered file folder there are several mtl.txt with a matching undo.txt files. If there is more than one of each they are date stamped like this "2009-10-09 00/50/47 -0500undo.txt". When I open them it looks like this.
0,5,25,33,0,11,5,33
5,1,29,6,0,9,5,6
0,7,5,16,3,9,9,16
1,9,21,7,0,5,23,7
3,9,11,2,2,9,19,2
2,1,7,26,1,9,19,26
1,1,5,5,5,1,27,5
0,9,25,27,0,5,5,27
5,1,25,18,0,5,7,18
5,1,23,10,1,11,29,10
I have never seem this before, anybody know what this is? They don't appear to be related to anything I am doing, and it appears to generate them at least daily. E-mail and Safari (4.0.3) are the only apps I consistently run daily.

No, I have not installed (to my knowledge) Mtl. A quick search in spotlight didn't find anything like that other then the mtl.txt files in the trash. Yes it only appears when I restart/reboot and they appear in the trash like the Recovered Files folder. I run Corporate Edition Norton Anti Virus, provided by my company (despite what everybody says about Norton), but I have run that for years. The only recently added app was MacScan mainly to clean out tracking cookies. It has never found any spyware. I do not run MacScan daily however, maybe a few times a month. This is a home computer and I am pretty much the only user. My son has his own (eMac) and my wife runs Windoze for her office. I have a wireless LAN (I am connected to the router on ethernet) with an active firewall and 128 bit WEP. Single family rural home, haven't noticed any vans sitting on the dirt road. Connection to my company is only occasionally through a very secure VPN (secure ID rotating password) and that's not recent either. Running windows desktop anyway. Brother Control Center runs in background for my multi function laser printer/fax/scanner. Run that for years as well. Don't know if it's related but I am having the frustrating spinning beachball deal on my Safari 4.0.3 which did not start until Safari 4.0.3 even though everybody wants to blame Adobe. Force quit several times a day. So I have recently uninstalled Flash (with the downloaded uninstaller) and reinstalled Flash. Twice. This is worse than windoze, that needs to get fixed. Anybody told Steve yet? Maybe the Safari Force Quits have something to do with that.

Similar Messages

  • UserTable.txt and UserVariables.txt fields descriptions

    Hello,
    I would like to get UserTable.txt and UserVariables.txt fields descriptions. These two files come in the package.cab obtained from an ACS SE 1113 running V4.2. These files, which uses a CSV format, do not include a heading row with field descriptions, nor i found this information in the ACS documentation.
    The reason for that is that we get a daily copy of package.cab, and from it we would like to write an application to generate a formatted daily report for every user with several fields including those:
    Name
    MaxSession
    MaxSess2
    Profile
    Aging policy
    Description
    So far i was able to discover the columns for Name and MaxSessions. But not the other fields, which are probably also included in the UserTable and Uservariables text files.
    Kind regards.

    Dear Albert
    Why not take a look at aaa-reports! enterprise? We can automatically import the cab file and pull out the data you're after.. plus more besides.
    www.extraxi.com

  • AUSZUG.txt and UMSATZ.txt import

    I am trying to import my testing auszug.txt and umsatz.txt files. They look as follows:
    Auszug.txt
    70440;123456;1;21.02.07;EUR;0;100;0;100;21.02.07;21.02.07;2
    Umsatz.txt
    70440;123456;1;21.02.07;"invoice 123456";60;21.02.07
    70440;123456;1;21.02.07;"invoice 123457";40;21.02.07
    I don't know where the problem is, because I'm getting error message:
    <i>Message no. FV658 "Total of line items in line item file not the same as in statement file"</i>
    Please guide me, where my mistake is!
    Message was edited by:
            Marius Pocius
    Message was edited by:
            Marius Pocius

    Exit FEB0001 is for developing a custom matching algorithm with number 901 ( and next) to be used instead of standard search algorithms like 001 ( docnumber and ref.number). So this has nothing to do with Multicash.
    For your information. I use the next to test Multicash porcessing in SAP.
    FF.5 with direct processing OFF and save the files to lacal disk. This is used to perform the translation of MultiCash to the SAP formats AUSZUG & UMSATZ. Be shure to have the right program assigned to FF.5, as you will see there is a large choice.
    Next. use FF_5. to upload the AUSZUG & UMSATZ. the RFEBKA00 program that is behind this transaction is the main processing program. It reads the files and performs the posting, using algorithmes like 001 and 901 to find the open items that should be cleared wit the payment.

  • Empty text files - dl.txt and t.txt

    I recently found these files on my hard drive and wondered what they are.  They are blank when opening in text edit.  Could they be malware?  I googles dl.txt and it seems to show up a lot in torrent sites.  Neither me or my husband ever use these sort of sites. 
    Is it safe to delete these files (they are in the trash right now).  Are there any other mysterious txt files I should be concerned about?
    Thanks for the help!
    Karen

    Text files are not executable files so they are not going to do anything themselves.  Short of having some sensitive info in them and you mailing them somewhere they aren't going to do anything.
    One caveat in that statement.  A text file could be an executable file but you would immediately know that because if you attempted to view it with a text editor it would look like gibberish to you, not a readable file.  Further the executable flag needs to be set in the permissions.   You can always view the permissions with the terminal ls command.
    Here's some references about permissions:
    Who Goes There? Understanding Permissions in UNIX
    Understanding file permissions on Unix: a brief tutorial
    Or just google "understanding unix permissions".
    Note even if a text file is executable code, something or someone needs to launch it.  For the case of "something" there would be other code somewhere in you system to do that.  That other code would usually be launched from various places looked at when booting or logging in.  Items that cause launches when booting will appear in the following directories:
    /Library/LaunchAgents
    /Library/LaunchDaemons
    /Library/StartupItems
    Items that are launhed when you log in are in,
    your login items
    ~/Library/LaunchAgents (in your home directory)
    It is your login items and all these directories you should first look at for possible malicious actions.  You probably already have stuff in some of these already because some applications use them to start helper processes to do their work.  Don't worry about what you currently see.  Only worry if you suspect malicious or just plain unstable behavior.

  • AllowedSWFdomains.txt  and allowedHTMLdomains.txt files

    We're trying to take a different tack in resolving our issue with offsite streams coming through our server.
    in the /rootinstall/Applications/vod and live folders, there are two text files which when altered, purportedly should only allow flash within html pages, and swf files to only be allowed if they reside on computers on specified domains. (Files are mentioned here)
    Am I understanding those files correctly?   I ask, because when I set them all by removing the asterisk from the last line, and repacing it with our domain.edu , i thought that meant that the server should only respond to swfs and htmls located on our domain computers....
    In a simple test from home, I fired up an swf that I know calls an mp4 from our server.  It played.   If I understand things correctly, it shouldn't have.
    are the other switches to be thrown to make these files do what I believe their supposed to?  or is this not their purpose?
    Also... is that the only place they need to exist?  or is it something you have to throw into every flash app folder on the server

    I think we found a suitable solution to our problem.  We edited main.asc to add an if/then block to set write access to the server.
        if(p_client.ip == '{our IP Address}'){
            trace('We are all good: ' + p_client.writeAccess);
        else{
            p_client.writeAccess = "";
    So if they come from anywhere other then our IP, they can't publish.  This doesn't reject the connection however, so they can still send stuff too our server...but it just doesn't go anywhere.  If we could detect what they were trying to do before we accepted the connection, we would be able to reject the connect outright.  Although, I haven't figured that out yet.
    People should be able to modify that to block out ranges or domains as well.  I made this change in the application.onConnect = function( p_client, p_autoSenseBW ) function call.
    I will note however, that much hair was pulled until we realized that main.far overrode main.asc.  Once we renamed main.far to main.farther, our main.asc code started working, and we were able to block.  Just an fyi to save you time if you go this route.  If you are doing more then simply streaming from your FMIS server (and most of you probably are) this is probably not a great solution.

  • [SOLVED]Keyboard and touchpad doesn't work after reboot from Arch

    Excuse me, but i'm a newbie. I'm not sure if this is an arch problem, but i will just post it here.
    I've beening using Arch64 and it works just fine. However, every time i reboot from arch into Windows 7 (32bit), the keyboard and touchpad will stop responding just when the Win7 splash screen shows, however the mouse works fine. Then when you shutdown the computer (from win7 now) it will take apparently longer time, and sometimes i have to press the power key 5 seconds to make it shutdown.
    It seems the correct way (to reboot from arch to win7) is to shutdown down the computer first and start it again, and everything will work fine.
    And rebooting from win7 to win7 or arch to arch or win7 to arch will work fine too.
    I'm glad to post extra information, but I've got no clue and i'm not sure what to put here.
    The laptop is a Lenovo Y450 with Intel Core Dual P7540, 4G Memory, NV GT240M. Kernel version of Arch is 3.0.6 (but the problem existed long since earlier versions) I don't have a swap partition. If you need extra information, please mention the item.
    Thanks a lot!
    Last edited by crlf0710 (2011-11-15 10:29:38)

    Hi!
    That is indeed strange. Since your external mouse works fine (which probably is connected via USB, right?) it appears that the problem lies somewhere around the internal keyboard/touchpad access. I'm not sure how this works with a Lenovo Y450, but just try to enter BIOS (in case you have not been there, you probably have to hit F1 or F2 during startup - less likely it would be delete or escape ...) and look for your keyboard/touchpad options.
    You should probably find something like "... legacy support ...". This is a relic from PS/2 times and emulates your internal input devices as PS/2 devices. So - when found, just change the setting (you cannot mess anything up, and both systems will probably not even pop up a message). My guess is it is set to "enabled" and Arch somehow messes with the PS/2 emulation in your case .... so just turn it off.
    good luck

  • Firefox 5 hangs after new install at Checking the Add Ons and will not start even after reboot

    Downloaded V5, ran the install, started Firefox and first screen is 'Checking Add Ons', the status bar is shown and immediately hangs. Have tried to restart, have rebooted and start and Firefox will not come up. Have to drop back to V3.6

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    This can be a problem with the file(s) that store the extensions registry.
    Delete the files extensions.* (extensions.sqlite, extensions.rdf, extensions.cache, extensions.ini) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry. New files will be created when required.
    See "Corrupt extension files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
    If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar (or click the "Find Updates" button in older Firefox versions) to do a compatibility check or see if there is an update.

  • Lion Server and mail push notifications stop after reboot

    Hi, I have a Lion Server mail server setup with push notifications to iOS devices.  Everything works fine until I reboot the server.  At that point none of the iOS devices receive push notifications until I kill their Mail app; once I relaunch it, push notifications start working again to that device until the next reboot.  Has anyone else seen this, and know how to solve it?  Thanks.

    You don't believe me but I just start to close the tons of opened in background apps on my iPhone and when I close all apps the mail push start working just great! Checked it several times!

  • Problem with Firefox 10.0.2, Flash Player 11.1.102.62 and allowedHTMLdomains.txt

    Hi all,
    I have a Flash Media Streaming Server 4.0 running for more than a year now.
    I protect the access to my server through the "allowedHTMLdomains.txt and allowedSWFdomains.txt feature"  (amongst other things...).
    We noticed that with Firefox 10.0.2 (last version) and Flash Player 11.1.102.62 (last version) our customers can't connect anymore.
    In the admin console we can read things like :
         Authentication failed for pageurl: http://my.domain.com, rejecting connection from XXX.XXXXXX.XXX
    If i try from the same computer with another browser, i get
      Accepted a connection from IP:XXX.XXX.XXX.XXX, referrer: http://my.domain.com/myPlayer.swf, pageurl: http://my.domain.com/myWebPage.php
    In the logs i have lines like that :
         --> connection error :
    connect
    session
    2012-03-01
    12:51:17
    CET
    XXX.XXX.XXX.XXX
    XXX.XXX.XXX.XXX
    6629
    2
    19
    _defaultRoot_
    _defaultVHost_
    vod
    _definst_
    0
    401
    XXX.XXX.XXX.XXX
    rtmpte(HTTP-1.1)
    2
    rtmpte://my.streamer.com/vod
    rtmpte://my.streamer.com/vod
    http://my.domain.com/myPlayer.swf
    WIN 11,1,102,62
    4702112566065840495
    3073
    3106
    normal
    http://my.domain.com/myWebPage.php
         --> connection successful:
    connect
    session
    2012-03-01
    14:31:20
    CET
    XXX.XXX.XXX.XXX
    XXX.XXX.XXX.XXX
    6629
    2
    19
    _defaultRoot_
    _defaultVHost_
    vod
    _definst_
    0
    200
    XXX.XXX.XXX.XXX
    rtmpte(HTTP-1.1)
    2
    rtmpte://my.streamer.com/vod
    rtmpte://my.streamer.com/vod
    http://my.domain.com/myPlayer.swf
    WIN 11,1,102,62
    4702113665527136624
    3073
    3073
    normal
    http://my.domain.com/myWebPage.php
    I can't find any significant difference...
    I didn't change anything in my configuration since the beginning, and the application was working without probleme with every version of Browser/FlashPlayer untill now.
    I suppose this is a bug, from Firefox or FlashPLayer or FlashMediaServer.
    Is there anyone from Adobe that could help me to solve this or "workaround" this, knowing that i must use the security features.
    Thank you very much for your help!
    Sam

    Ok for the timeline.
    For your workaround : it was already the case : i had only domains in my allowedDomains.
    I'll have to turn off this feature, and after the update of the flash player, hope that not too many people will stuck to the old flash player version...
    Thx for your help anyway!

  • Firefox 4 and the previous 3.x version fail to update changed user home pages? After reboot the ancent home pages reappear and the replace the now ones. Why & how to fix this software bug?

    - Firefox 4.0 is used as preferred browser
    - One can change the user home pages. The new homepages are found & work ok after closing and reopening Firefox.
    - However, after rebooting the laptop (HP Elitebook), old Firefox home pages reappear, they replace the new ones.
    - If I remember correctly this bug appeared already prior Firefox 4.0, this malfunction/ bug was noted in some last winter version before the v 4.0.
    - Help/ Bug fix is appreciated!

    - Firefox 4.0 is used as preferred browser
    - One can change the user home pages. The new homepages are found & work ok after closing and reopening Firefox.
    - However, after rebooting the laptop (HP Elitebook), old Firefox home pages reappear, they replace the new ones.
    - If I remember correctly this bug appeared already prior Firefox 4.0, this malfunction/ bug was noted in some last winter version before the v 4.0.
    - Help/ Bug fix is appreciated!

  • After reboot PC sets speakers to 2

    I've setup my 5. speakers and everything works great! After reboot, it's back to 2. and I have to change the settings manually. Why is it not saving my setup?

    Joachim_Joe wrote:
    I turned off sync, rebooted and it stayed on 5., both in the control panel and in the SB Li've Speaker setting. Great. Weird, guess the sync function does not sync
    Anyone else have this problem?
    I think this is quite old problem for CT software (I had this w/ SB Li've! Value).
    But, if it still gives you grey hair and no other resolution can be found, then, you can autorun the script found from
    http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=69900
    Set script to work the way it sets speaker mode to 5. and add a link to the script into startup folder.
    jutapaMessage Edited by jutapa on 08-08-2006 02:33 PM

  • Cookies missing after reboot

    I'm running windows XP and lately all cookies were deleted every time I reboot my computer. All cookies, and default settings are gone after reboot, I even switched back to IE8 and same issue noted on both IE8 and Firefox 3.6.12

    Again and again!!!I reformatted my usb drive and created a brand new safepoint.
    everyting was ok but two days after, the system has rebooted (no warning and I don't know why) and my Safepoints are missing in the dashboard.
    Obviosly in the WDMyCloud desktop app the SP are visible... Frustating! :-(

  • Installed ok after reboot  apach problem

    Dear all hello
    I have installed 11.5.9 on win2k and it was ok but after reboot when it did not listen on 8000 port so i tried to inspect services and found oracle apacke server vis(instance name) is not started but when i try to start it, it says colud not start as it is some windows internal error.
    Any help.
    Thanks

    hi
    this is not the best approach , instead it is advisable to look in event viewer , which gives the best reason for not starting. It also provides the event id and error related info , which can be used to get the answer from microsoft support.
    regards
    srinivas

  • Cannot start the db after reboot machine

    Hi,
    Oracle DB: 10.2.0
    OS: RHEL5
    Successfully installed db and created the database.
    but after reboot of machine I cannot start the database.
    I have tried all the possible means( i deleted the listener and tns, recreated again rebooted etc etc)
    oracle@med ~]$ sqlplus /nolog
    SQL*Plus: Release 10.2.0.1.0 - Production on Sun Sep 5 13:48:10 2010
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    SQL> conn /as sysdba
    ERROR:
    ORA-12162: TNS:net service name is incorrectly specified
    SQL> conn sys/medisys@rmct as sysdba
    ERROR:
    ORA-12514: TNS:listener does not currently know of service requested in connect
    descriptor
    Thanking you,
    regards,

    risingstar wrote:
    Hi,
    Thanks for ur reply
    plz have a look
    [oracle@med ~]$ cd $ORACLE_HOME/dbs
    [oracle@med dbs]$ ls
    hc_rmct.dat init.ora initrmct.ora orapwrmct sqlnet.log
    initdw.ora init.ora.84201013612 lkRMCT spfilermct.ora
    regards,Well.You see that your sid is rmct not RMCT then
    export ORACLE_SID=rmct
    sqlplus "/as sysdba"
    startup

  • Cannot start the db after reboot

    Hi,
    Oracle DB: 10.2.0
    OS: RHEL5
    Successfully installed db and created the database.
    but after reboot of machine I cannot start the database.
    I have tried all the possible means( i deleted the listener and tns, recreated again rebooted etc etc)
    oracle@med ~]$ sqlplus /nolog
    SQL*Plus: Release 10.2.0.1.0 - Production on Sun Sep 5 13:48:10 2010
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    SQL> conn /as sysdba
    ERROR:
    ORA-12162: TNS:net service name is incorrectly specified
    SQL> conn sys/pwd@rmct as sysdba
    ERROR:
    ORA-12514: TNS:listener does not currently know of service requested in connect
    descriptor
    Thanking you,
    regards,

    By definition your installation was not successful.
    What network were you connected to when you installed the database?
    After you rebooted are you still connected to the same network?
    Has the IP Address changed?
    How is "HOST" defined in your listener.ora tnsnames.ora files?
    Oracle 10g dot anything is currently in desupport mode. It would be far better to install 11gR2 at this point in time.

Maybe you are looking for