Mulitple Ip's in TNSNAMES for same service

Hi,
Can i have mulitple IP's for same tns entry in TNSNAMES.ORA file.
Like
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 123.456.789.012, 111.222.333.444)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
Or is there any other way to achieve this?
Thanks in advance.
Avinash.
Pune.
India.

I don't think it is allowed to include multiple ip-addresses or hostnames in the same line. You can try using something similar to this:
MYRACDB=
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = <Host1>)(PORT = 1529))
(ADDRESS = (PROTOCOL = TCP)(HOST = <host2>)(PORT = 1529))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = MYRACDB)
HTH
Thanks
Chandra Pabba

Similar Messages

Paying twice for same service

Hi ive already got BT phone with an unlimited call plan and have had it for a long time then at the beginning of September decided to get Broadband option 1 which also has unlimited calls , well stupidly i thought the previous charges for calls would now cease and the new ones would take it's place but alas no i am now going to be charged my original 4.99 calltime plan and my new broadband/calltime plan 15.99 . They give you a new phone number which you assign to your home hub connected phone and charge twice. Im mortified .

BT Broadband comes with Internet calls on a different number and is NOT the same thing or a replacement for your standard call package, but an add on. Your standard number has to stay live as that's what your broadband is tied to. You could choose to cancel the £4.99 anytime package, in which case calls via that would be free at the weekend. But beware. Internet calls are dependent on broadband doing it's job properly and are not of the same quality as your standard phone line. For most purposes it's OK but it has limitations, for example, I've yet to find one of those tone driven menu systems beloved of companies which can recognise a tone sent over the internet.
Also take into account that there are some services which are nominally free, but BT will charge you for if you don't make the appropriate number of calls. For example: 1571 is free unless you make either 2 or 6 calls (including inclusive calls, but not 0800) depending on whether you're billed monthly or quarterly. If you've taken advantage of paying your annual line rental at a discount you will be charged £1.50 per month if you don't make the same requisite number of calls. So do use your main number too during its free period or you may have a nasty surprise.
You actually have 2 different things.

HT204053 What are the pros and cons of 1) choosing to use the SAME Apple ID for iCloud services on one side, and purchases on the iTunes Store, App Store, and iBookstore, on the other side; or 2) to have and use two separate Apple Ids for these "two sides

All is in the title, so I repeat it below with a better identation.
What are the pros and cons of
1) choosing to use the SAME
Apple ID for iCloud services on one side, and
purchases on the iTunes Store, App Store, and iBookstore, on the other side; or
2) to have and use two separate Apple Ids for these "two sides"?
P.S.
I have loads and loads of free podcasts in iTunes in my iMac, that are certainly more thant the 5 gigas the iCloud provides for free, so I don't want those to go to the cloud. But this is perhaps a different question...
Also need to mention that I have itunes on a mac, a pc and an iphone.
Sorry to look so silly with this question, but I don't get the "big picture".

You need to create a user account for your wife (or yourself depending on who has the current user account). When syncing, each of you should sign in as a separate user, login to iTunes and then sync. I had this problem when my sister got an iPhone. When we did her initial sync, everything on my iPhone showed up on hers. Apple gave me this solution.

How to use the same services-config for the local and remote servers.

My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
    <services>
        <service id="amfphp-flashremoting-service"
            class="flex.messaging.services.RemotingService"
            messageTypes="flex.messaging.messages.RemotingMessage">
            <destination id="amfphp">
                <channels>
                    <channel ref="my-amfphp"/>
                </channels>
                <properties>
                    <source>*</source>
                </properties>
            </destination>
        </service>
    </services>
    <channels>
    <channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
    </channel-definition>
    </channels>
</services-config>
I think the problem is the line
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
but I'm not sure how to use the same services-config for the local and remote servers.

paul.williams wrote:
You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
Hi Paul,
In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
-services=path/to/services-config.xml
IF
services-config.xml
have tokens in it and user have not specified additional
-context-root
and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
-services=path/to/services-config.xml
have been specified durring compilation.
I dont know any better way to exmplain this, but in summary there is two places that you can tell swf about service confogiration,
1) pass -services=path/to/services-config.xml parameter to compiler this way you tell swf file up front about all that good stuff,
or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime .

Mail Server Hosted on outlook freely but services for same getting shut from 31 july 2014

Dear Sir/ Madam,
My Mail Server Hosted on outlook freely but services for same getting shutting from 31
july 2014,
i want to continue the same product please advice me to get the same, i got the mail from outlook is follow
Dear Outlook.com Customer,
About a month ago, we let you know that Outlook.com no longer supports new custom domain sign ups. As a current customer, we will continue to support the ability to log in to Outlook.com with your existing custom domain email address, but as of 31 July 2014,
you will no longer be able to add or remove accounts in your domain.
Instead, we recommend that administrators who wish to continue managing email addresses in their domain should consider Office 365 – Microsoft's premium online email service. By migrating to Office 365, you will be able to continue managing your custom domains,
as well as benefit from modern enterprise-class mail, collaboration and communication tools.
The previous email we sent you contained a complimentary 90-day subscription to Office 365 Small Business Premium for 5 users. This is a reminder that you need to redeem this offer before 15 July 2014.
You will still be able to log in to Outlook.com with your custom domain during your Office 365 subscription, even if you choose to cancel your Office 365 subscription.
How to migrate your account
You can find a step-by-step guide to migrating your account here.
Yours sincerely,
The Outlook.com Team
please help me,
my contact no is - +91-9619899231

Hi,
Yes, as what Roady says, Outlook.com no longer supports new custom domain sign-ups. You can continue to login to Outlook.com with your existing custom domain email addresses. But after July 2014, domain administrators will no longer be able add or remove
email accounts in your domain.
Please consider to move to Office 365 to get enhanced features and capabilities for modern enterprise-class mail, collaboration and communications. About how to move your custom domain to Office 365, please refer to:
http://windows.microsoft.com/en-us/outlook/migrate-custom-domain
Regards,
Winnie Liang
TechNet Community Support

Service Registry: Publish the same service for two different business syst.

Hello all,
i am trying to publish a webservice in the Service Registry of a PI 7.1 EHP1 and i'm facing a problem. I have configured two Business Systems that use the same Service Interface, let's say Dev and Qua systems. So, this two business systems can be senders of the webservice. I have been able to publish the first Sender Agreement properly, but when i try to publish the second Sender Agreement as the service is already publish i get the following error:
One service definition with the same name 'SI_I015_EneGISDeviceLocationServicesInternalMessage_In(urn:enemalta.com.mt:iubs:integrations)' found; do you want to delete this object from the Services Registry and continue publishing?
I've been told that this error might be a permission problem but the user i am using has all the permissions required. Does anyone know how to solve this issue?
Thank you very much in advance!
Roger Allué i Vall

Hi Roger,
Is that problem solved for you?
I am looking for inputs on a similar issue here. I need to have a single service but with two different endpoints (for two sender business systems) published in SR.
Thanks,
Marz

Completely different AMF request packets for same remote service call from Flex to PHP using ZendAMF

I was trying to debug why one of the remote-services in our Flex application was failing randomly. What I found was interesting. Completely different AMF request packets were sent for same remote service call from Flex to PHP.
When the service call succeeds the AMF request packet looks like the following:
POST /video/flex/bin-debug/gateway.php HTTP/1.1
Host: localhost
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.15) Gecko/20110303 Firefox/3.6.15
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
Accept-Language: en-us,en;q=0.5
Accept-Encoding: gzip,deflate
Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7
Keep-Alive: 115
Cookie: PHPSESSID=j6u30i8uu6c3cvp8f4kipcpf05
Referer: http://localhost/video/flex/bin-debug/main.swf/[[DYNAMIC]]/5
Content-type: application/x-amf
C    ontent-length: 305
Flex Message (flex.messaging.messages.RemotingMessage)     operation = getMemberFromEvent    clientId = 2F997CD0-7D08-8D09-1A9B-0000422676C8    destination = MembereventService    messageId = B46AB58D-2241-83F0-41E4-9FE745565492    timestamp = 0    timeToLive = 0    body =     [      280    ]    hdr(DSId) = nil
And when the service fails the AMF request packet looks like this:
ServiceRequest: getMemberFromEvent; RemoteService; getMemberFromEvent
(mx.messaging.messages::RemotingMessage)#0
body = (Array)#1
    [0] 250
clientId = "1AA4FAAB-AEA5-8109-4B0D-000002B3A9A1"
destination = "MembereventService"
headers = (Object)#2
    DSEndpoint = (null)
    DSId = "nil"
messageId = "2F92E6C0-FE92-A09B-B150-9FE2F28D9738"
operation = "getMemberFromEvent"
source = "MembereventService"
timestamp = 0
timeToLive = 0
Also, following is the error message on Flex when the service fails:
{Fault code=Channel.Call.Failed, Fault string=error, Fault detail=NetConnection.Call.Failed: HTTP: Failed, Destination=MembereventService}
We are using Swiz as the micro-architecture for Flex development and Zend AMF for remoting between Flex and PHP.
Any ideas what is wrong here, what is causing Flex to send different request packets for the same service & what I can do to fix it?

Hi, I know that your post is almost 5 years ago, but have you found the solution to this issue?
Thanks.

We use Thunderbird all the time and love it, but for about a week it constantly goes into not responding mode. My boss uses the same service at home with no pr

Thunderbird is a great asset to my boss and I. We use Thunderbird all the time and love it, but for about a week it constantly goes into "not responding mode". My boss uses the same service at home with no problem at all.
I did an "safe mode" and restart and for a few minutes I thought it was "healed". However, I did a search and the same thing started happening again. The little blue ring starts spinning and "not responding" pops up above the toolbar. Sometime the screen fades to a sort of greyish and no mouse click are responded to, even to close Thunderbird.
Please help however you can. Our office number is 512.246.3995.
Thank you,
Mary

We wonder if it is a firewall problem that developed here at the office. My boss uses her account at home and all is well, but here, experiences the same issues I described

We are a two iPhone family, both on the same service provider. My wires iPhone is unable to connect to the home network where as mine is! In the settings her phone has no details for the IP address etc where as mine does! I cannot even enter the details.

We are a two iPhone family, both on the same service provider. My wires iPhone is unable to connect to the home network where as mine is! In the settings her phone has no details for the IP address etc where as mine does! I cannot even enter the details manually.
I have done resets on off and nothing? HELP!

What is that and how. I have 3 airports all configured identically and connected to one router via ethernet!
A power cycle is powering down for ~ 1 minute and powering back up.

Same ProForma Order for Product & service

Hi..
MY client is creating same sales order for product & service.
When creating proforma only product is getting picked while services are not getting picked up in proforma.
In VOV7 (Maintain iem categories)
for Product-ITEM CAT-TAN(Details)-Revevent for BILLING IS maintained as A-Delivery related billing doc
while for service-ITEM Cat-TAO(Details)-Relevent for bILLING IS maintained as I-Order related billing doc
May I know this is the reason why service material is not getting picked up?
How shd i resolve this?My client want pro forma shd come with material and service..
Awaiting for your kind responce..
Manoj

Hi!
It it possible to create single proforma for product & services.Im having common sales order which has one product with item category TAN & one service material which is having item category TAO.
While creating proforma only TAN (Product) is coming in proforma while another TAO (Services)is not coming at all.
Billing Relevance for TAN is maintained as Delivery related (A) While the same is maintained for TAO(Services) as Order realated.My client want the same billing relevance as it is?
May I know how it can be possible?
Awaiting for a reply...
Regds
Manoj
Regds
Manoj

Tnsname for RAC

Hi,
I am working on RAC.
And I want to connect client to the database but I don't know the tnsname's parameter. I tried the normal way which is configuring the IP address and port number and SID and it didn't work. Please help if there is a different way to configure the tnsnames on RAC.
Wessam

Thanks for ur fast reply.
I tried with tns client settings given by U , but it gives me the error:
ora-12154 : TNS : Could not resolve service name.
I have also tried connecting to this same service name from sql*plus client in same (server )machine giving user@service_name it works fine .....but connecting from client on the other machine is giving me the above mentioned error.
Warm Regards
wessam

Error in Creation of Service Name for Bussiness Service

Hi Friends
I am creating customized Service Program for Bussiness Service which is used for uploading spotbilling data to ccb . The service program CM_Sbm_Upload consists of program com ids CIPBSEGP,CIPMMRDP,CIPTSATP . when i give this to bussiness service i am getting error
Service metainfo missing for 'CM_SBM_UPLOAD'
pls help me to resolve this issue.
Thanks&Regards
sivaram

Hi,
I've got the same error during my development of a page maintenance service.
Please check if the cm.jar is correctly deployed in your splservice.ear and check also all other deployment directories.
You can find them in the Output window of eclipse after execution of the "Deploy CM" script.
When the cm.jar is deployed well, check if you annotations are correct.
My annotations are looking like this:
* Perform Batch Add.
* @PageMaintenance (secured = false, service = CMIMDIMP,
*      body = @DataElement (contents = { @DataField (name = CM_SIMULATION)
*                  , @DataField (name = XML_REQUEST)}),
*      actions = { "change"
*            , "read"},
*      modules = { "foundation"})
*/To connect a Page Maintenance Service, you must first create a service programm and the "service name" of the service program must match to
the name of the service annotation that you have specified on your Page Maintenance Service, in my case "CMIMDIMP".
There is no validation during the saving of the service programm, the validation happens when you save the Business Service.
BTW. you can use jd-gui.exe to decompile the cm.jar file but you will not see the annotations !
For viewing the ear file I'm using 7-zip.

Job for httpd.service failed. See 'systemctl status httpd.service' and

Hello,
I am the problem. I change "/etc/httpd/conf/httpd.conf" to install php5 on apache.
sudo systemctl start httpd
Job for httpd.service failed. See 'systemctl status httpd.service' and 'journalctl -xn' for details.
systemctl status httpd.service
● httpd.service - Apache Web Server
Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled)
Active: failed (Result: exit-code) since lun. 2014-08-25 12:19:31 CEST; 1min 18s ago
Process: 2208 ExecStop=/usr/bin/apachectl graceful-stop (code=exited, status=1/FAILURE)
Process: 2433 ExecStart=/usr/bin/apachectl start (code=exited, status=1/FAILURE)
Main PID: 2060 (code=exited, status=0/SUCCESS)
août 25 12:19:31 creaprog apachectl[2433]: httpd: Syntax error on line 66 o...y
août 25 12:19:31 creaprog systemd[1]: httpd.service: control process exite...=1
août 25 12:19:31 creaprog systemd[1]: Failed to start Apache Web Server.
août 25 12:19:31 creaprog systemd[1]: Unit httpd.service entered failed state.
Hint: Some lines were ellipsized, use -l to show in full.
cat /etc/httpd/conf/httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/srv/http"
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:/run/httpd
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule data_module modules/mod_data.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule deflate_module modules/mod_deflate.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule logio_module modules/mod_logio.so
#LoadModule lua_module modules/mod_lua.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_event_module modules/mod_mpm_event.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule imagemap_module modules/mod_imagemap.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
#Load php5 module
LoadModule php5_module modules/libphp5.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
AllowOverride none
Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# AllowOverride FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Require all granted
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# PHP settings
Include conf/extra/php5_module.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
Thanks, sorry my english is bad .
Last edited by Creaprog (2014-08-25 10:25:17)

I just noticed the exact same thing. It turns out that the httpd-ssl.conf file on my system is still the old v2.2 syntax, which means that the SSLMutex directive is still in there. This is an invalid directive after 2.2.
This is where things get interesting. At first, I simply thought I had forgotten to merge httpd-ssl.conf.pacnew after apache had been upgraded to 2.4. However, when I check my pacman.log, it appears that httpd-ssl.conf was never upgraded when apache went to 2.4 - (2.2.26-1 -> 2.4.7-1). There was never a pacnew file generated to be merged.
I took a look at the apache package via the abs and the "proper" httpd-ssl.conf is certainly in there, so why pacman never created a pacnew file is a mystery.
Anyway, to fix this: pull the httpd-ssl.conf from the apache package, either from your cache, using the abs and building it, or (I think) pacman may re-install it if you move the file to a backup location (not sure about this). Then merge your original httpd-ssl-conf with the new one.

Different tax codes in the MIRO for single service item

Dear all,
Customer wants to enter 2 different tax codes in the MIRO for single service item. How it can be achieved?

>
Milosavljevic Sreten wrote:
> Just loudly thinking... what can be reason that one service for same invoice is taxable with two different tax codes?
>
It is cross-counties transportation. Part of route outside company country is non-taxable, inside part is taxable. Amounts are proportional to distance and hence become known only at time of invoice receipt.
Users do not want to create 2 separate invoices. They would like to have ability to enter 2 lines in MIRO. But I need your help to understand, how it can be done? Service receipt is done by single line (because actual taxable / non-taxable amount is unknown at that time). So, is it possible to enter non-taxable amount in MIRO in some additional line?

I have been a customer with Verizon, since 1996. Recently, my husband has been added onto my account. We have both been experience drop calls. My husband contact Tech support for over 2 weeks. We were pretty upset to be paying a lot of money for a service

I have been a customer with Verizon, since 1996. Recently, my husband has been added onto my account. We have both been experience drop calls. My husband contact Tech support for over 2 weeks. We were pretty upset to be paying a lot of money for a service that didn't work. Verizon advised us that would upgrade both of our phones (to see if that solved the problem). Ok...this is where Verizon has forgotten customer service rules. He order 2 phone...one for himself, one for me. 1st the wrong address on the package..Fedex couldn't deliver...2nd...missing condo number Fedex couldn't deliver again...(2nd call to Verizon)...3rd package was finally deliver with 1 phone...missing my phone. Contacted verizon rep...reorder my phone again..but sorry we cannot give the same price as quoted on 21April...even though...its our mistake...Ok...Ok..what a surprise..but we can do this...after 65 minutes...found a price that was a little bit more...fine...just order the phone....I reordered phone on 28April...on the April 29...no email..so I can Verizon for the 4times in a few days..sorry your order was delay due to our Fraud dept. OK...talked to fraud dept...ok..account is good..will release phone and ship. OK...Next day, no email with deliver confimation. Contact Verizon 5 times now...sorry..your order was cancelled...YES...cancelled again...2nd time now...but we can reorder...OK...sorry but we cannot honor that price that was quoted..really...agent messed up...again...but we can do this for you....I don't understand...your mistake...ALL the times...
Strange ...how my order gets cancelled twice by Verizon's mistake....yet you cannot honor prices that your agents quoted!!!
I didn't reorder the phone....I cannot in good faith same with a company that does not stand behind their own mistakes...and worse...they make the poor customer pay for it...
I will not be renewing my contact...its time to Cricket Wirless...which my sister-in-law loves for half the cost....

I hope that you aren't complaining about dropped calls INSIDE your condo because no amount of switching or upgrading devices will solve that.
VZW will not guarantee service inside of any structure. There are just too many factors. If the problem is inside then you might want to look at one of the following:
1.) Network Extender (may cause issues for others in a condo or apartment style setting)
2.) A Google Voice Number (Free with a Gmail email address), downloading Google Hangouts Dialer and forwarding your calls to the GVN so that you can make and receive calls over Wi-Fi.

Mulitple Ip's in TNSNAMES for same service

Similar Messages

Maybe you are looking for